Error says printer disconnected, but it is not
Earlier, my printer works well. But now when I run HP solution Center on my Windows XP, it says printer disconnected message. Please help me, I have checked all my power lines and fine, but I can't find a solution to this problem...
Tags: Windows
Similar Questions
-
Windows XP Installer doesn't work is not for the automatic updates or MS Office 2010. Error says Safe Mode, but my machine is not in Mode without failure.
When I try to run MS Office 2010, it starts a dialog box "preparing to install...." "even if I had used it for a few years. In the end, it fails and tells me whether I'm in Mode safe or I need to reinstall Windows Installer, I have done several times.
I can automatically download updates and they seem to be installed, but all fail at the end.
Any ideas on how to address this problem? Yes, I know that it is probably recommended to buy a new PC, but I need this machine operate fully for the next months. Then by reloading the operating system does not, either. He told me that my XP disc is the wrong version.
Thanks in advance for any ideas.
Hello
1. What is the exact error message that you receive?
2 have you made changes on the computer before this problem?
3. all of the updates fail to install?Method 1: Make sure that the Windows Installer service is not set to disabled.(a) click Start, click run and type services.msc and press Enter to open Services.
(b) click the Windows Installer service, and then click Properties.
(c) if the startup type box is set to Disabled, change it to Manual.
(d) click on OK to close the Properties window.
(e) right click on the Windows Installer service and then click Start. The service should start without errors.
(f) click on the file menu, and then click exit.Method 2: Error message "Could access the Windows Installer Service" when you install a program in Windows XP
http://support.Microsoft.com/kb/315353
Note: To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:How to back up and restore the registry in Windows
http://support.Microsoft.com/kb/322756Also note: Please, do not KB315341 (how to perform an upgrade on the spot (reinstallation) of Windows XP)Method 3: You can also download the latest version of Windows Installer from the link below:
http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=enReference: troubleshoot common Windows Update, Microsoft Update and Windows Server Update Services installation issues
http://support.Microsoft.com/kb/906602
-
HP Officejet j5750 error print saying "on paper" but it is not
HP Officejet j5750 error print saying "on paper" but it is not, there 20 sheets. I remove and replace the paper and press OK and the same error.
Typically when you get an error "on paper", the rollers slide and need to be cleaned. The document below should help you work through the problem. If this does not work, you will need to replace the printer.
"Out of paper" Error Message is displayed and the product is not look upward or feeding of the paper:
-
During upgrade Adobe Creative Suite CS4 ME in Adobe Creative Suite CS5.5 Design Premium, I get an error saying that the serial number is not an eligible product, please try another. I used to be able to get a code for the customer service, but I can't chat. Please advise!
MoeGhazal I have reviewed your account and it seems that you have upgraded to a volume license CS4 Design Premium for an upgrade of retail Design Premium 5.5.
I also shows that you have made two purchases of CS5.5 Design Premium, but the second purchase was cancelled. Make sure that you use the serial number that ends in 7886.
If you are using the correct serial number, then it is likely, that the installer won't recognize your serial number of volume license CS4 as being valid for upgrade. If you can contact our support team you can be traversed through an unlocking procedure to allow you to proceed with the installation. You can contact our team of support directly in Contact with the customer. You can try to install a web browser, you have not previously used. It of probably a toolbar or other software applications affect your ability to access the media cat successfully.
If you are unable to reach our support team, then please check your account information is accurate. If you can please then update this discussion after the confirmation of this so I can ask a member of our support team contact you directly.
I would recommend again reaching out directly if possible it will be the most effective method to resolve your current error.
-
Kodak ESPC310 + 0365 and Sony Vaio, printing problem
Kodak ESPC310 + 0365 and Sony Vaio both on the same wireless network, Vaio says printer offline, so don't not printing - suggestions?Hello
· What operating system do you use?
· Remember to proceed with changes in hardware or software on the computer before the show?
Follow these methods and check if that helps:
Method 1:
I suggest you run the fixit tool and check if it helps.
Problems printing and printing errors
http://support.Microsoft.com/mats/printing_problems/
Method 2:
Follow the steps in troubleshooting section and check if that helps.
Printer in Windows problems
http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
See also:
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems
http://support.en.kodak.com/app/answers/detail/A_ID/19500/selected/true
http://support.en.kodak.com/app/answers/detail/A_ID/1329/selected/true
-
for some reason any when I connect it says blocking down but it dose not after an hour I would push the bar on or pull off the Gack DC it's been driving me crazy
Hello
· What operating system do you use?
Method 1:
I suggest you perform the clean boot and check if it helps.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135/en-us
Note: Don't forget to start your machine in normal mode by following step 7 of the link.
Method 2:
If you are facing this problem in Windows XP, see this link:
Advanced Troubleshooting for shutdown problems in Windows XP
http://support.Microsoft.com/kb/308029
Method 3:
Refer to the Kb article and check.
You can't do a computer that runs Windows 7 stops or sleep
http://support.Microsoft.com/kb/977307
Try to run the troubleshooter of performance and check if it helps.
http://Windows.Microsoft.com/en-us/Windows7/open-the-performance-Troubleshooter
Method 4:
Also check the event viewer
Event Viewer is a tool that displays detailed information about important events on your computer.
http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer
-
I have a wireless printer. On the computer it says ready, but when I try to print it says not connected. Help
Print a Network Setup page using the controls on the front panel of the printer. See your manual for details. Some newer HP printers have very summary User Guides (if you have the Deskjet 3000 J310, this means you) and it is difficult to see how - or if - you can print a Network Setup page.
What you want to do is (a) determine the IP address that is currently configured in the printer and potentially re - configure an IP address of your choice. You may need to search in the help for the printer on your computer system. You may be able to access the printer setup utility using your Internet browser or you need maybe connect you the printer to the computer via USB and use the printer installation CD.
Once you know what the IP address of the printer (and, preferably, how to change), then...
On your computer.
- Click Start > printers and faxes
- Right click on your printer icon, and then select Properties
- Click on the Ports tab
- Taking care NOT to click in the list of ports (where you might accidentally change something), click Configure Port
- Compare the IP address in the box "printer name or IP address.
- If the IP in the box is not the same as the one you have determined for the printer, make sure.
- OK your way out and you should be able to print.
Now... If the above has solved your problem, you might want to know why and probably would like to know how to prevent it from happening again. Him 'why' is normally your wireless router automatically sets the IP address of the printer. If you turn the printer off, there is no guarantee that the router will assign the same IP address when you turn back on it, especially if the other devices were connected to your router in the meantime. There are two methods to deal with this.
One, you can check the checkbox in the tab "Configure Ports" which always says 'print to this device, even if its IP address changes.' This is a feature that the HP printer drivers have, but in my experience, it is not reliable. It works probably better if you change the contents of the box of the IP address of the printer "hostname." This is something that you should be able to find in the printer setup utility accessed through your web browser. It is NOT the name of 'Port' that appears on the "Port Configuration" tab in the area above the IP address.
Two, you can change the way that the printer receives his usual default IP (automatic) address manual, otherwise known as a static IP address. If you do this, you will need to choose an IP address that is in the same subnet as your router (this means that the first 3 of the 4 series of numbers of the IP address must be the same). For example, if the IP address assigned to your printer is 192.168.1.105, then any IP address that you select for use as a static IP address for this printer must begin with 192.168.1. The last part may be any number of through254 2, EXCEPT that it may not be a number this router can assign to something else. You will find this bit of your router configuration utility. Or, if your printer was awarded automatically an address with the last part as 100, 101, 102, 103, etc, you'll be pretty reliable if you choose a number far away, but still within the range (for example, 25, 50, 200).
-
HP TouchSmart 4600 was printing find, but now will not print from Adobe
I was printing fine, but all of a sudden when I try to print a form in Adobe format, it will not be printed. First I get a dialog showing progress, then a 2nd box 'Print to file' output file name must be filled in, but it does not print the page. ?????
Hi Patricia,
· Did recent changes to the computer?
· Are you able to print from other applications?
In the meantime you can check out the article below:
Resolve PDF printing problems. Acrobat, Reader products affected
http://kb2.Adobe.com/CPS/873/cpsid_87346.html
I hope this helps.
-
Envy4500: Computer says printer is offline and will not print, but it's online
I jumped through all the hoops of tech and there seems to be no perfect solution to this problem. However, can I change my settings wireless direct on with security on without security on Off, and at any time, I am doing this, work in Quebec will begin. But I have to do it almost everytime I have print something. I need to scan from my remote IO. Let me know if HP has a better solution. Obviously, the computer is not properly talk to the printer. I started having this problem after Windows 10, but yet curiously, so I don't think it's a matter of Windows.
Hello
Thank you for using the HP Forums.You can try this:
Creating a TCP IP port
1. print a Configuration Page to get the printer IPv4 address (you can also tap on the icon wireless on the front panel of your printer to obtain the IP address)
2. on your PC, go to the Panel control, devices and printers, right-click the printer and on the left, click printer properties, select the Ports tab.
3. click Add Port, select the Port TCP/IP Standard, then New Port and follow the instructions in the wizard.
4. Enter the IP address of the printer.Note that you can ALWAYS go back to the original port the HP software installed by selecting the HP port on the Ports tab (in the properties of the printer)
Hope that helps!
-
file:///users/imacpoppcorn/desktop/Skjermbilde%202015-07-17%20kl.%2016.14.08.PNG
file:///users/imacpoppcorn/desktop/Skjermbilde%202015-07-17%20kl.%2016.15.33.PNG
-
Its says it works, but it is not any of the volume buttons are reactivated
I have tried everything I know, and it's not much. speakers were working but now they won't. All the test says that all things work.
Thanks for any help.
I'm happy to have helped. Very good troubleshooting!
-
tried to install camara, but when it says click on your product, but the camara is not on the list, only scan appears on the list, but I don't have a scanner. tried to uninstall, but does not appear on the Device Manager. try to download programs, and they do not arise in Start menu, just uninstall it list? Thank you
Hello
I suggest to uninstall unwanted software from your computer and then try to install the camera. Visit the link below to find the steps on how to uninstall programs "programs and features".
http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program
After you have installed the camera, please check in the folder C:/Program files if it shows there.
It may be useful
-
I have a wireless Dell V515W printer. Currently it is USB connected because the wireless isn't good in my area. I tried to print from yesterday. I can make copies but can not print anything from my message or incoming mail at all.
Most often when a device does not work, it is because the driver is damaged. Re-install a new copy should help -
Dell Inspiron M5110 battery says plugged in, but it does not load
just got my counter M5110 & battery for dell inspirion says connected but does not support. How can I fix?
Hello
Thank you for contacting Microsoft Community.Did you reboot your PC then were? If it fails, remove the battery after turning off the PC and the attempt to insert the battery and check for the load.If it fails, go to the settings of the BIOS (press F2 during the Dell screen on startup). Check if the charing is disabled or enabled. Turn it on, save and exit settings.If that fails also, turning on the PC with the battery and charger connected and turned on. Now directly remove the battery and then insert it again after a few minutes.If this also fails to solve the problem, contact Dell support for assistance. -
I'm trying to install Adobe CS5 Production Premium on a x 64 Windows 8.1 PC. I get to the point where the serial numbers have been validated and the installation starts, but quickly fails with the following error messages. How can I work around this problem?
Exit code: 7
-------------------------------------- Summary --------------------------------------
-0 fatal Error (s), 81 (s), 88 warning (s)
ATTENTION: OS configuration is not for {92D4A929-78F1-4EC3-B626-08B3CF5B784F}
ATTENTION: OS configuration is not for {9B97EC91-B3FD-4BFF-88FC-5345A26AC2E7}
ATTENTION: OS configuration is not for {B8D286BC-A68D-4E74-9F68-8756A49896D8}
ATTENTION: OS configuration is not for {C0AA232E-BD1B-40B5-A176-A2BEB67FFAE1}
ATTENTION: OS configuration is not for {CD29B5CA-4727-4114-9AD9-25CCCE6E4014}
ATTENTION: OS configuration is not for {D3598CAC-AEB3-4234-A1E0-16F47D5F38CC}
ATTENTION: OS configuration is not for {DE5DE662-2ECB-4D93-967B-221FBCC8A736}
ATTENTION: OS configuration is not for {F319804F-E3A4-4C02-8AEC-CB39A4F6447E}
ATTENTION: OS configuration is not for {F9C71630-0EE3-475C-9E2B-ED95AE197DBD}
ATTENTION: Payload cannot be installed due to the failure of the operation dependent
ATTENTION: Payload cannot be installed due to the failure of the operation dependent
ATTENTION: Payload cannot be installed due to the failure of the operation dependent
ATTENTION: Payload cannot be installed due to the failure of the operation dependent
ATTENTION: Payload cannot be installed due to the failure of the operation dependent
ATTENTION: Payload cannot be installed due to the failure of the operation dependent
ATTENTION: Payload cannot be installed due to the failure of the operation dependent
ATTENTION: Payload cannot be installed due to the failure of the operation dependent
ATTENTION: Payload cannot be installed due to the failure of the operation dependent
ATTENTION: Payload cannot be installed due to the failure of the operation dependent
ATTENTION: Payload cannot be installed due to the failure of the operation dependent
ATTENTION: Payload cannot be installed due to the failure of the operation dependent
ATTENTION: Payload cannot be installed due to the failure of the operation dependent
ATTENTION: Payload cannot be installed due to the failure of the operation dependent
ATTENTION: Payload cannot be installed due to the failure of the operation dependent
ATTENTION: Payload cannot be installed due to the failure of the operation dependent
ATTENTION: Payload cannot be installed due to the failure of the operation dependent
ATTENTION: Payload cannot be installed due to the failure of the operation dependent
ATTENTION: Payload cannot be installed due to the failure of the operation dependent
ATTENTION: Payload cannot be installed due to the failure of the operation dependent
ATTENTION: Payload cannot be installed due to the failure of the operation dependent
ATTENTION: Payload cannot be installed due to the failure of the operation dependent
ATTENTION: Payload cannot be installed due to the failure of the operation dependent
ATTENTION: Payload cannot be installed due to the failure of the operation dependent
ATTENTION: Payload cannot be installed due to the failure of the operation dependent
ATTENTION: Payload cannot be installed due to the failure of the operation dependent
ATTENTION: Payload cannot be installed due to the failure of the operation dependent
ATTENTION: Payload cannot be installed due to the failure of the operation dependent
ATTENTION: Payload cannot be installed due to the failure of the operation dependent
ATTENTION: Payload cannot be installed due to the failure of the operation dependent
ATTENTION: Payload cannot be installed due to the failure of the operation dependent
ATTENTION: Payload cannot be installed due to the failure of the operation dependent
ATTENTION: Payload cannot be installed due to the failure of the operation dependent
ATTENTION: Payload cannot be installed due to the failure of the operation dependent
ATTENTION: Payload cannot be installed due to the failure of the operation dependent
ATTENTION: Payload cannot be installed due to the failure of the operation dependent
ATTENTION: Payload cannot be installed due to the failure of the operation dependent
ATTENTION: Payload cannot be installed due to the failure of the operation dependent
ATTENTION: Payload cannot be installed due to the failure of the operation dependent
ATTENTION: Payload cannot be installed due to the failure of the operation dependent
ATTENTION: Payload cannot be installed due to the failure of the operation dependent
ATTENTION: Payload cannot be installed due to the failure of the operation dependent
ATTENTION: Payload cannot be installed due to the failure of the operation dependent
ATTENTION: Payload cannot be installed due to the failure of the operation dependent
ATTENTION: Payload cannot be installed due to the failure of the operation dependent
ATTENTION: Payload cannot be installed due to the failure of the operation dependent
ATTENTION: Payload cannot be installed due to the failure of the operation dependent
ATTENTION: Payload cannot be installed due to the failure of the operation dependent
ATTENTION: Payload cannot be installed due to the failure of the operation dependent
ATTENTION: Payload cannot be installed due to the failure of the operation dependent
ATTENTION: Payload cannot be installed due to the failure of the operation dependent
ATTENTION: Payload cannot be installed due to the failure of the operation dependent
ATTENTION: Payload cannot be installed due to the failure of the operation dependent
ATTENTION: Payload cannot be installed due to the failure of the operation dependent
ATTENTION: Payload cannot be installed due to the failure of the operation dependent
ATTENTION: Payload cannot be installed due to the failure of the operation dependent
ATTENTION: Payload cannot be installed due to the failure of the operation dependent
ATTENTION: Payload cannot be installed due to the failure of the operation dependent
ATTENTION: Payload cannot be installed due to the failure of the operation dependent
ATTENTION: Payload cannot be installed due to the failure of the operation dependent
ATTENTION: Payload cannot be installed due to the failure of the operation dependent
ATTENTION: Payload cannot be installed due to the failure of the operation dependent
ATTENTION: Payload cannot be installed due to the failure of the operation dependent
ATTENTION: Payload cannot be installed due to the failure of the operation dependent
ATTENTION: Payload cannot be installed due to the failure of the operation dependent
ATTENTION: Payload cannot be installed due to the failure of the operation dependent
ATTENTION: Payload cannot be installed due to the failure of the operation dependent
ATTENTION: Payload cannot be installed due to the failure of the operation dependent
ATTENTION: Payload cannot be installed due to the failure of the operation dependent
ATTENTION: Payload cannot be installed due to the failure of the operation dependent
ATTENTION: Payload cannot be installed due to the failure of the operation dependent
ATTENTION: Payload cannot be installed due to the failure of the operation dependent
ATTENTION: Payload cannot be installed due to the failure of the operation dependent
ATTENTION: Payload cannot be installed due to the failure of the operation dependent
ATTENTION: Payload cannot be installed due to the failure of the operation dependent
ATTENTION: Payload cannot be installed due to the failure of the operation dependent
ATTENTION: Payload cannot be installed due to the failure of the operation dependent
ATTENTION: Payload cannot be installed due to the failure of the operation dependent
ATTENTION: Payload cannot be installed due to the failure of the operation dependent
ERROR: The following payload errors were found during the installation:
ERROR:-Adobe CS5 Infrastructure CSXS: installation failed
ERROR:-Microsoft_VC90_ATL_x86: installation failed
ERROR:-Adobe Media Player: installation failed
ERROR:-SiteCatalyst NetAverages: installation failed
ERROR:-Adobe CS5 language x 64: installation failed
ERROR:-Microsoft_VC90_CRT_x86: installation failed
ERROR:-Support for Adobe Photoshop CS5: installation failed
ERROR:-Adobe Bridge CS5: installation failed
ERROR:-Adobe Encore CS5 Royalty third party content: installation failed
ERROR:-Microsoft_VC80_ATL_x86: installation failed
ERROR:-Installation of common fonts x 64 recommended: installation failed
ERROR:-AdobePDFL x 64 CS5: installation failed
ERROR:-DeviceCentral_DeviceCentral3LP-en_US: installation failed
ERROR:-Microsoft_VC80_MFCLOC_x86_x64: installation failed
ERROR:-Adobe XMP panels CS5: installation failed
ERROR:-Adobe Player for Embedding: installation failed
ERROR:-Photoshop Camera Raw: installation failed
ERROR:-AdobeColorCommonSetCMYK: installation failed
ERROR:-AdobeHelp: installation failed
ERROR:-camera profiles Installer: installation failed
ERROR:-Adobe Mini Bridge CS5: installation failed
ERROR:-Microsoft_VC80_CRT_x86_x64: installation failed
ERROR:-Adobe Photoshop CS5 language Pack_x64_AdobePhotoshop12-en_US_x64 English: installation failed
ERROR:-Creative Suite 5 Production Premium: installation failed
ERROR:-AdobeColorJA CS5: installation failed
ERROR:-Adobe ReviewPanel CS5: installation failed
ERROR:-Adobe Premiere Pro CS5 Royalty third party content: installation failed
ERROR:-Adobe Media Encoder CS5 Dolby X 64: installation failed
ERROR:-Adobe CS Live BrowserLab: installation failed
ERROR:-Photoshop Camera Raw (64-bit): installation failed
ERROR:-Microsoft_VC90_MFC_x86: installation failed
ERROR:-CSXS Extension history: installation failed
ERROR:-Adobe Photoshop CS5 Core_x64: due to a lack of Language Pack installation
ERROR:-Suite Shared Configuration CS5: installation failed
ERROR:-Adobe CS5 language: installation failed
ERROR:-PDF settings CS5: installation failed
ERROR:-DeviceCentral: due to a lack of Language Pack installation
ERROR:-AdobeColorEU CS5: installation failed
ERROR:-AdobeTypeSupport CS5: installation failed
ERROR:-AdobeColorVideoProfilesCS CS5: installation failed
ERROR:-Adobe OnLocation CS5 Royalty content: installation failed
ERROR:-AdobeColorCommonSetRGB: installation failed
ERROR:-Adobe Player for Embedding x 64: installation failed
ERROR:-the necessary common fonts x 64 Installation: installation failed
ERROR:-Microsoft_VC90_ATL_x86_x64: installation failed
ERROR:-Adobe CS5 Extensions CSXS: installation failed
ERROR:-Microsoft_VC80_ATL_x86_x64: installation failed
ERROR:-AdobeOutputModule: installation failed
ERROR:-Microsoft_VC90_CRT_x86_x64: installation failed
ERROR:-Adobe Media Encoder CS5 PCI: installation failed
ERROR:-Microsoft_VC80_CRT_x86: installation failed
ERROR:-AdobeCMaps x 64 CS5: installation failed
ERROR:-AdobeTypeSupport x 64 CS5: installation failed
ERROR:-Adobe Illustrator CS5: due to a lack of Language Pack installation
ERROR:-Microsoft_VC90_MFC_x86_x64: installation failed
ERROR:-Adobe WinSoft Linguistics Plugin CS5: installation failed
ERROR:-Adobe WinSoft Linguistics Plugin CS5 x 64: installation failed
ERROR:-first Pro CS5 Adobe third party content: installation failed
ERROR:-AdobePDFL CS5: installation failed
ERROR:-HIL help search: installation failed
ERROR:-AdobeCMaps CS5: installation failed
ERROR:-Adobe after effects CS5 third party content: installation failed
ERROR:-Microsoft_VC80_MFC_x86_x64: installation failed
ERROR:-required common fonts Installation: installation failed
ERROR:-Adobe after effects CS5 Royalty third party content: installation failed
ERROR:-standard Adobe 2.0: installation failed
ERROR:-Microsoft_VC80_MFC_x86: installation failed
ERROR:-AdobeColorNA CS5: installation failed
ERROR:-AdobeColorPhotoshop CS5: installation failed
ERROR:-Adobe Media Encoder CS5 Dolby: installation failed
ERROR:-Adobe Illustrator CS5_AdobeIllustrator15en_USLanguagePack: installation failed
ERROR:-Microsoft_VC80_MFCLOC_x86: installation failed
ERROR:-Adobe Soundbooth CS5 Codecs: installation failed
ERROR:-recommended Installation of common fonts: installation failed
ERROR:-CS5 Adobe Extension Manager: installation failed
ERROR:-AdobeJRE: installation failed
ERROR:-Adobe ExtendScript Toolkit CS5: installation failed
ERROR:-Adobe Soundbooth CS5 Royalty Codecs: installation failed
ERROR:-Adobe AIR: installation failed
ERROR:-Adobe Media Encoder CS5 PCI X 64: installation failed
-------------------------------------------------------------------------------------Exit code: 6, Exit Code: 7 Installation error - http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html
The problems with the Setup logs. CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html for more information on how to review your Setup logs
Maybe you are looking for
-
Hello. Does anyone have experience or opinion about CleanMyMac, cleaning of Mac software package? I just tried the free trial version and it seems to do a good job, but I thought that I would get comments, if possible, before you buy one complete. Th
-
Drag several graphic signals simultaneously scroll bar
I have several signals that come from the same source and I want to draw on maps of signals separated as on the example that I have attached, so far all good, but I would like to be able to use a single scroll bar to scroll through all the graphics a
-
How to fix the BSOD: critics of the process died?
Hello Recently, I've restored my Acer Aspire 771 G back to factory settings, as I had a lot of problems after that I upgraded to windows 8.1. Now my computer works fine, except for a problem... I frequently get the BSOD: critics of the process is dea
-
losing money but Adobe CC does not?
Hello, my problem is that I had the version student CC for about 3 months now, but suddenly he says that my payment information will noteven if it is still money from my bank account. It also won't let me open any of the applications more. I'm so con
-
I mounted the ISO 6.0 VCSA, installed the Plugin for integration of customer and am trying to run the VCSA Upgrade Wizard. However, after completing step 4, the wizard hangs during the process of 'Validation '. In the web console, a JavaScript error