Error scan with LlaserJet M1212 nf 22

Similar Questions

• Canon MP250 will not scan with Windows 7. 2,155,2 error code

  Canon MP250 will not scan with Windows 7. 2,155,2 error code

  This Canon MP250 printer/scanner never worked well with Windows 7 and 8 for example. Printing would just hang out and print only the laptop restarts. Scanning has been difficult but eventually worked. Now, the scanner does not at all.

  This is the message that comes with the 2,155,2 Error Code:

  Cannot communicate with the scanner. Cable may be disconnected or scanner may be turned off. Check the status. Scanner driver will be closed.

  They aren't joking about the closing of the scanner driver. I didn't know that the closure would be permanent.

  Also, I get the following message when I plug in the printer:

  USB device not recognized.

  It appears to malfunction. Windows accepts the USB port only when I unplug the power cord of the printer and wait half a minute before plugging new.

  Canon told me I need to download the driver software of its UK site and updated. Fact that several times, also uninstalled and reinstalled the original software and the driver supplied with the disc.

  Software will download, but not install. Guard me with the message: do you want this program to make changes to your computer?

  I tried to install the updated driver manually, because Windows does not find a driver for this printer.

  It drives me crazy, slowly. Can anyone help?

  Sorry for the repetitions of my question. I'm new here and I'll try to find the right forum.

  Instead, please answer your original on the subject (this one) thread.

  It's his original-online http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/windows-7-will-not-communicate-with-canon-mp250/2bb17ed8-41ee-496a-88c3-79b3aa7c7e81 thread (June 8, 2013)

  @BryanBeeMM => Please post a follow-up while answers to your real in order to avoid even greater confusion original thread => http://answers.microsoft.com/thread/2bb17ed8-41ee-496a-88c3-79b3aa7c7e81

  Thank you.

• Error scanning WIA for Deskjet Ink Advantage 2060

  I can't scan with a Deskjet Ink Advantage 2060.

  HP Print and Scan doctor said that the error is the Windows WIA. It says HP TWain scanning and other tests are fine, not that I know how to do a TWAIN scan with it.

  Reading another post, I can confirm that "detecting hardware Kernel ', 'Windows Image Acquisition (WIA)' and 'RPC Remote Procedure Call ()' is running in automatic mode in the services list.

  My printer reacts to an application to scan and seems likely to be an analysis sometimes, but the software seems to act as if it receives nothing back from the scanner?

  I've uninstalled and reinstalled all the drivers twice without success.

  Reading http://h30434.www3.hp.com/t5/Scanning-Faxing-and-Copying/cant-get-HP-Office-jet-to-scan/m-p/1785313/highlight/true#M41216

  I tried another USB on my computer, and hey presto! He works all of a sudden!

  Looks like the HP scanners cannot handle all USB connectors. Odd.

• Laser Jet Pro MFP 177fw: cannot scan with Laser Jet MFP 177fw Pro

  I have been using my 177fw Laser Jet Pro MFP on a Mac 10.10 for awhile.  Print, fax & scaning all worked.  I can scan is no longer.  I get the message "the scanner has not completed analysis" (there may be another message before that but it crushed until I read.).

  I use a USB cable for the connection.

  On August 31 I got HP Printer Software Update Verson 5.  What is my problem?

  Thanks for your help.

  Hi @scg117,

  Welcome to the HP Forums!

  I noticed your post about how you can't scan with your MFP HP Laserjet Pro 177fw on your Mac. And I'm happy to discuss this issue scan for you!

  To confirm that the hardware of the printer is functional, you are able to make a copy with the glass of the scanner of the printer?

  To copy:

  1. load the document on the scanner glass according to the indicators on the product.

  2. close the scanner.

  3. on the product control panel, press the button number of Copies.

  4. Select the number of copies.

  5. press the black start copy button or the button color launch copy to start copying.

  Let me know if it works, or if you see another error message.

  If the copy works, then try the steps described in this guide, Scanner USB connection is lost (Mac).

  If you are unable to reach a resolution, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

  I hope this post is helpful!

• HP 2210 printer all-in-one: after updating WIndows 10, I can print but not scan with my HP 2210 all in one

  I've updated to Windows 10 and since then I can print but not scan with my HP 2210 all-in-one printer.  I tried to download the software updates, but nothing seems to work.  Any suggestions

  Hi @Sajapand @ddegan

  I see that you both scan problems after upgrade to Windows 10, and I may be able to help.

  Most of the products have updated software available on the HP support Web site for Windows 10.

  I also saw a few posts that say Windows 8.1 driver works for Windows 10 as well, then you could try also.

  HP provides a free tool called HP Print and Scan doctor to diagnose and troubleshoot printing and scanning problems. I recommend you to download and run the HP print and Scan Doctor , if she doesn't fix it automatically I would know what errors or messages that you receive.

  Do you know if you are able to scan using paint?

  To perform a scan of the painting: HP Multifunction printers - how Scan: Windows 8

  (This is the same for Windows 10, of what I said)

  1. Click the Start button () in the lower left corner of the screen, click on Searchand type Paint.
  2. Click on the painting in the results.
  3. Click fileand then click on from a scanner or camera.
  4. Select your printer, click OK, and then click Scan.

  Please let me know if any of these steps has resolved your problem, or if there is anything else I can do to help.

  I look forward to hear from you!

  Thank you

• line of Basler runner rul1024 - 57gm GigE camera scan with broadcom network adapter

  Hi, I am learning to use a camera basler runner GigE line scan with labview but encounter problems, please help me.

  My software and hardware:

  LabVIEW 8.6, software of acquirition of vision 2010,

  rul1024 camera - 57gm Basler, broadcom Netlink (TM) Gigabit Ethernet Network Card (not an intel pro 1000, so the driver is it also the driver broadcom).

  Q1: In the max, it appears two cameras, while I log in only one. There is a red X in the other and a camera in use error.

  Q2:

  The camera can get the image, but in the attributes of the camera, there is no trigger information, so it seems that I can't solve the relaxation in labview, while the camera supports the trigger mode.

  

  Hi Lynn,

  I read the page and find the solution. In fact, I just need further reduce the size of packet to 1500. It works fine now.

  Thank you ~.

• I can't scan with my kodak all in one soft ware, but I can with the windows Wizard can help you .kodak's struggle to solve the problem for me

  I have windows xp 32-bit 11gigs of free space on the hard drive.kodak said that the software is not installed properly.they tried repeatedly by SANDRINE remote access

  Hi georgeey,

  Please report the problem to the Microsoft Community Forum.
  If we understand it, you cannot scan with the kodak camera.
  We will help you solve the problem.
  1. What is the model number?
  2. have you made changes on the computer recently?
  3. do you get an error message when you try to scan?
   
  It is possible that Kodak may have an older version of its software that works.

  http://support.en.kodak.com/app/answers/detail/A_ID/23858/related/1/selected/true

   

  Method 1:

  Try to install the software to clean boot, and then try to scan

  Reference:

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".
  Follow the steps provide in the article below to perform the clean boot. http://support.Microsoft.com/kb/929135

  Note: Reset the computer to start as usual after a repair.

   

  Method 2:

  If this does not help, please uninstall and reinstall the device driver.

  a. go to control panel and select the device of scaning

  b. right-click on the device and select Uninstall tab drivers.

  to reinstall the driver to see the link given above manufacturer Web site.

   

  Hope above links help you. If the problem persists, you can write back to us and we will be happy to help you more

• HP Officejet Pro 8500 A909a_ Scan with HP Solution Center does not work

  Hallo.

  My name is Michele.

  I can't use the solution Center HP to scan with my HP Officejet Pro 8500 A909a (I have windows 7 O.S.) because when I click on "Scan document", a white error window appears and says "necessary component is unfounded or not properly installed.". Install new software HP Photosmart". I uninstalled and again installed the software, but it does not work. Previously, he worked with XP. Recently, I updated XP with Windows 7 and I found the solution Center HP does not work. Maybe, it does not match with Win 7?

  Thank you to everyone who wants to help me

  Hi people,

  I appreciate the time you took to try to solve this problem. I was able to do more research and found a useful solution, please click on the link below to get started:

  The HP imaging device is not found... - popup error

  Please try the recommendation and let me know the results.

  Thank you

• scanning with envy 4500

  I bought a HP Envy 4500 several months ago.  No problems at all with the copy /printing.  Went to use the Scan function for the first time yesterday and get an error message that the scanner and the computer are not connected. I tried to scan the front of the printer and the HP Photosmart software and still get the same message.  Other functions still work correctly.  Help!

  I finished chatting online with someone in support of HP for more than 2 hours.  RELOADED software of printer driver.  I was scanning with HP Photosmart Studio before I bought my new printer.  Now I'm scanning with HP Scan, which is located in the HP folder on my hard drive (not sure if it's still there or if he appeared with the new download).  I can easily transfer what I have scanned scanning HP Photosmart Studio in.  HP scanning works even better than Photosmart.

  Problem solved.

• OfficeJet Pro 8600 Plus: scans with USB, Ethernet 10 Mbit/s but with 1 Gbps

  I installed my router a Netgear router from 100 Mbps to 1 Gbps router TP LINK Archer C8. I use a printer more Officejet Pro 8600 with scanner. Scanned the fin on the Netgear router, it is not scan with TP link sanner. I get an error "Scanner communication cannot be established. I changed to a USB connection and was able to scan successfully. I noticed the printer only has 10 and 100 a half and full speed duplex settings. The scanner is not compatible with a 1 Gbps puts? I uninstalled and reinstalled several times printing software.

  UPDATE : tried the HP Scan and Capture application in the Windows store. Works very well. Must be some type of problem with the native drivers scan and connections broadband.

• Not able to do a scan with Microsoft InBox Driver

  Hello

  I am not able to do a scan with the Sub parameters of analysis, using Inbox Driver Scanner Scan & Fax application in vista PC [32bit_Vista X 86 SP2] client (WIA 2.0)

  Source: Feeder

  LongueurSource: A4

  Color: gray

  Format: XPS

  Resolution: 100

  The same combinations work with the driver supplied by the manufacturer, but with the drivers Microsoft InBox, I am not able to do a scan with this combination.

  I was getting the error message below "ERROR applying settings to Driver".

  Kindly let me know, it of because of a inbox driver or not.

  If yes give me your comments on this to solve.

  If there is no problem with the driver supplied by the manufacturer, by all means use this driver instead of the Microsoft Inbox driver (whidh is perhaps not as common or may have other issues).  If the other driver has resolved the problem, then be happy that you have a solution and use it.  Forget the driver that does not work well and just throw it away.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Major problems in scanning with c410a all-in-one...

  In courses run a Windows 8.1 high-end desktop system with a huge amount of memory and have experienced a tremendous amount of problems printing & scanning with my c410a. I have run the maintenance on this pc daily cleaning Cache, Virus scan, all and then some, the PC is a horse race except for printing and scanning...

  This Scanner/printer works very slowly, more slowly, and then it did on my old XP system for 10 years.

  Sometimes in the middle of the analysis, it stops and freezes by me to close the centre of solutions through the Manager of task or at best its not scan more then 2 or 3 elements software b4 of the scanner hangs. I tried everything in the forums I've seen, unplug the power cord of the c410a, restart, etc... Everything that...

  I ran the "HP Print and Scan Doctor" and sometimes it seems to work, allowing me to sweep slowly a point or two b4 it crashes again. Howeverwhen running the Scan Doctor it especially crashes when it gets to the part "scan Windows wia" of its efforts. These poor printing and scanning capabilities on the PC or faster (a factor) that I've ever used is unacceptable.

  Surely you experts can troubleshoot a very frustrated guy from HP?

  Thank you all for your help, especially the HP Tech Support staff... Although I just bought a laptop $1100.00 at HP with a support package for Smartfriend Tech that I don't try to use it for this problem because this c410 is on my desk which is not an HP.  Just for the record I never got my HP HP mini work said they could fix it by phone, but wanted at least $60.00 $ to do. I never had luck with my HP stuff, but I hope that this will not be the case with my new HP laptop... I had heard that HP had better...

  The problem with my c410a seems to be resolved and I can make the dpi / send changes in 10 seconds approximately. Slow but manageable compared to the 3-30 minutes, he took earlier today.  How I solved it on my own without ANY HP

  Support Tech or HP Forum was to completely delete all HP software from my desktop system and installation of the HP Wizard and to install All THE OF BLOATWARE ITS on my system. I had previously been excluding the HP Photo creations, Bing toolbar and software HP Customer Participation however magically or predictable when I allowed all of HP's Bloatware to be installed it worked the works. With the exception of the Bing toolbar that I got an error for which says it's not compatible with IE 11, it's funny I think.

  Only, I posted this comment on the risk that it may help other people having the same problem as it may seem, with HP, you have a better chance to get help from people who are not HP or only if you pay HP to help. While I would expect HP to delete this message who knows maybe they figure this is the best message in the month.

• Cannot scan with Photosmart C6280 with Mac OS x Snow Leopard.

  When I try to scan with my Mac, I get a scanner not found error.  I am able to print.  When I access the HP utility, it shows the printer in the installed column but it shows a Red House beside her and will not let me access it. The printer is connected to an Apple Airport Extreme, via an ethernet cable, and the airport is linked via a USB cable to the computer.

  I guess you mean that the printer and the Mac are connected to the router with Ethernet Airport?

  If you are using snow leopard and have the HP software before Snow Leopard (either from a CD not marked as compatible with 10.6 or you recently upgraded to Snow Leopard and had the software HP on your Mac before you upgrade - even if you made a standard from the old software uninstaller or installed new software on top of it) , you must uninstall the software using the "scrubber":

  Go to Applications/Hewlett Packard / click Uninstall HP
  Click on continue
  Highlight your device in the left pane
  Hold down the Ctrl and Opt Cmd and click on uninstall< scrubber="">
  There will be a pop up that asks if you are sure you want to uninstall all hp software. (At this point, if you continue, all HP printers you have installed will need to be reinstalled)
  Click on continue and let it finish

  Restart your Mac

  Now run a software update.

  Finally, download and install the "Full Featured" driver and software from the "Support & drivers" link at the top of this page.

• Acrobat freezes when scanning with Epson scanner in windows 10

  I upgraded to Windows 10 and installed the latest drivers for my Epson Workforce 635, the scanner, fax printer. Update of the acrobat software. Now, I am unable to scan to PDF, Adobe Acrobat pro 7.  Adobe Acrobat starts up, I see the beginning of Epson and the Acrobat stops responding.

  I've scanned in PDF format directly with the options of scan Epson, Abby Fine-reader 9.0 and Quick Books. I was also able to scan with Adobe Acrobat using the WIA driver.

  No Adobe Acrobat error freezes.

  Any suggestions?

  Hi ntanti,.

  Acrobat 7 is not more supported by Adobe & is also not compatible with Windows 10, so it is not possible to predict how Acrobat 7 will include no compatible platform.

  Please use the application in the compatible environment so that its fully functional.

  However, still you can try some troubleshooting steps, from a few Troubleshooting scanner questionscan be used.

  Kind regards
  Nicos

• Not able to scan with the preview after upgrade from Mac OS Sierra...

  After upgrading to Mac OS Sierra. I'm unable to use the preview to scan.  Before this upgrade, it worked fine.  The HP scanner software does NOT work something like OS 10.8 or 10.9.  Preview worked perfectly so far.  If anyone knows how to solve this problem, your contribution will be greatly appreciated.  Thanks in advance.

  Have you tried scanning with Capture of Image instead? It worked for me.