Error "this graphics driver is not compatible with this version of windows" when you try to install the graphics card

Similar Questions

• No sound help please - driver is not compatible with my version of windows

  Original title: no noise don't please help

  While UN-installing some I have programs no longer use i accidentally uninstalled my driver audio soundmax. I have a dell optiplex gx520 with the 32-bit version of windows 7 Home premium. I tried to find and re - install the driver sound max and I find one and download each time it says that the driver is not compatible with my version of windows. I would really like my back her again. also, I went into the start menu and click on the sound devices and game controllers, and all that shows is my webcam. I know that I have an internal sound card and a speaker and I know that they do not work, but when I searched for the pilot, he was gone and so I know that it is uninstalled by me when I remove other programs, I no longer use. any help you could give me would be greatly appreciated. Thank you.

  Hi Bill,

  See the link to install the drivers for the Dell OptiPlex GX520. The drivers are not available for the Windows 7 operating system. Therefore, I suggest you to install in compatibility mode and check if it works:

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  Let us know the results.

• Cannot boot from the Windows 7 installation DVD. Error when installing XP "this installation disc is not compatible with your version of windows. To upgrade, you need the correct installation disc.

  Please help me

  Why my cd not DVD boot? will have a difficult time install my win7 home ed I have xp and the note ""this installation disc is not compatible with your version of windows. " To upgrade, you need the correct installation disc. For more information, see your computer system information. To install a new copy of Windows, restart (boot) your computer using the installation disc, and then select custom (advanced option). "always keep flashing... I already did your post, but I cant stand dvd always turn to windows xp? and my driver working I just installed win xp months ago

  Hi the prey,

  ·         What is the brand and model of the computer?

  You should check the settings of the computer BIOS (Basic Input\Output System) to boot from the CD/DVD. Check the manual or the support of the computer Web site for the same.

  Note: Be careful when you change the BIOS settings. The BIOS interface is designed for advanced users, and it is possible to change a setting that can prevent your computer from starting properly.

  Run the Windows 7 Upgrade Advisor to see if your computer is compatible to install Windows 7.

  Windows 7 Upgrade Advisor - download - Microsoft Windows

  See also:

  Installation and reinstallation of Windows 7

• Problem and error install monkey island 4 (escape from Monkey Island) - not compatible with my version of windows.

  This is to say that it is not compatible with my version of windows, I tried to open it with other versions of windows, xp, or 2000 and it does not open. He refuses to install and I am really frustrated. The bed 16-bit application error is...

  Any help would be greatly appreciated.

  Thank you

  Hi kirsteenie,

  1 Windows operating system you are using?

  2. you use 32-bit or the 64 bit version of Windows?

  16-bit applications are not supported in 64-bit Windows versions.

  If you use Windows 7, then you can install Windows XP mode and then install the game in XP mode and check if you can play the game or not.

  You can view the following link to use Windows XP mode:

  Install and use Windows XP Mode in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/install-and-use-Windows-XP-mode-in-Windows-7

  Note: Windows XP mode will run only in Windows 7 Professional, full and business editions.

  You can also contact the game manufacturer support and check.

  http://forums.LucasArts.com/index.jspa

  http://www.LucasArts.com/support/

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• "This installation disc is not compatible with your version of Windows.

  I have a center of Lenovo think that I got from a friend. When I tried to install Windows 7, I get a pop up window that says: "this installation disc is not compatible with your version of Windows.

  Contact Lenovo and get a set of discs of recovery/restore the system if you want to reinstall the version of Windows that comes with it.  Now, your most likely problem is that you have a record of 64-bit and you try to install it inside the XP which is a 32-bit operating system.  Will not work.

• Defrag file version is not compatible with my version of windows

  I'm running vista 64, I tried to run a Disk Defragmenter, but it keeps telling me the dfrgui.exe file version is not compatible with my version of windows, where I can download a update to this file?

  Please start the command prompt (cmd.exe) with admin rights [1] and run sfc [2]:

  sfc.exe/scannow

  He is able to find and repair broken files? Are now able to run Disk Defragmenter?

  Best regards
  André

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-run-an-application-once-with-a-full-administrator-access-token [1]
  [2] http://support.microsoft.com/kb/929833 "a programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• After you download El Capitan, I received the following error message when you try to install: the drive is not formatted in MAC OS extended (journaled). Use disk utility to enable logging or reformat the disc. Can anyone help?

  After you download El Capitan, I received the following error message when you try to install: the drive is not formatted in MAC OS extended (journaled). Use disk utility to enable logging or reformat the disc. Can anyone help? (My disk utility shows that she in MAC OS extended (journaled) format.)

  It shows that it is Mac OS extended, not journaled. Click enable logging in the toolbar.

  The thing you read is if you format the drive using the RAID settings you have selected. You have to look at the bottom of the window where it shows the Format.

• CASE policy Error Message When you try to install the driver for Kodak esp 5250

  I get the error message "Manager policy of Microsoft .net framework case has stopped working" when you try to start the installation of the 5 Series Driver Pack. Tried all the Basic .net troubleshooting I found on the net. Get the option debug or close the program. After clicking Close the program, I get the error message "installation printer Kodak has stopped working". Any ideas? Advice? More info needed? Vista SP 2.

  Hi MC_JP,

  Users faced with a similar question solved this problem by installing Microsoft .NET Framework 3.5 Service Pack 1.

  Step 1: I you suggest to download and install Microsoft .NET Framework 3.5 Service Pack 1 from the following link and then try the printer driver

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AB99342F-5D1A-413D-8319-81DA479AB0D7&displaylang=en

  Step 2: Put the computer in a clean boot and installation of the printer driver

  Follow step 1 in the link below,

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Important: n ' forget not the computer to start normal follow step 7 in the link.

  Kodak printer drivers

  http://www.kodak.com/global/mul/service/downloads/DownloadLookup.jhtml?PQ-path=15506&product=EKN036744

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• DIFx Driver Package install error = 536870141 when you try to install the MFL-ProSuite for a Brother MFC-J870DW printer all in one

  Hi everyone, I have read the various issues pertaining to the Brother software and the IS052 error that I got also.

  I spoke with brother two times and they tell me that I'm missing a driver and if I sent the error message DIFx Driver Package install error = 536870141 to Microsoft, they would be able to provide me with the driver I need.  Brother also had me try to install from the disk and also on their site and I got the same error.

  I am a home user, so not very technical when it comes to drivers, etc..  I know that you need.  So please don't you technique on me.  I have been messing around with this now for almost 2 weeks and can that copy and print.  I can't scan or fax due to this error when you try to install the software.

  I have the disk with the drivers on what I did when we first got the computer.

  I use Windows 7 64-bit.  I really need help so I hope that there is someone who can solve this problem.

  Thank you very much

  Judy F.

  SW Florida - USA

  Karthik, sorry it took me so long to answer.  I hate it when people do that to me then again I am sorry.

  After trying your suggestions, nothing seemed to work so I asked my son who is a type of systems to help me.  I he provided with suggestions and error message, etc..  He read about all this and then remote connected my suburb.

  He renamed the errorlog and then tried to reinstall the Brother software and got the error.  He was then able to read this file was causing the error without reading through the tone of the error messages.  It turns out that there is a file that brother was looking for in one place, but it was in another.  He copied to where brother was looking for her, has done a reboot, loaded the software without problem.

  I am now scanning and everything works as it should.

  So maybe it's the same problem that others causing a problem.  If they can get the steps to find the error Log, look at the error message that is created in the error log, which will tell them what brother file cannot find and then go from there.

  I don't think I could have done myself, but he knew where to look for such things, and I don't have.

  Thanks again for all the help I got from this forum.

  Judy F.  (a happy user of printer Brother)

• When you try to install the HP Laserjet 1300 printer error there is a problem installing this hardware.

  Original title: HP Laserjet 1300 Windows XP, SP3 error installation

  When you try to install the HP Laserjet 1300 printer, I get the following error message and the process stops and restores.

  CANNOT INSTALL THIS HARDWARE

  There was a problem installing this hardware

  HP Laserjet 1300 PCL 6

  An error occurred during the installation of the device.

  The specified Module could not be found.

  I have used the original printer installation cd, bought a new cd from HP and downloaded the drivers directly from the HP Web site and I get the same error.  The record show error install printer on each attempt of events. Can anyone help?  Thank you

  Hello

  You are able to install other programs?

   

  Method 1: See the following article:

   

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c02073861&LC=en&cc=us&product=3795406

   

  Method 2: view the following steps and see if that helps.

  (a) disconnect the printer

  (b) uninstall the software and drivers on the computer

  (c) plug the printer back

  (d) allow the Hardware Wizard search for drivers

  e) if it does not, it asks you to install the source for the drivers, the installation driver CD and install the drivers and see if that helps.

• error ikernelexe when you try to install the multimedia driver

  When you try to install the multimedia driver, I get the following message: "error installing ikernelexe. Using Windows XP. Please notify.
  Thank you

  Hi MarkPfeffer,
   
  This problem may occur if one or more of the following files are missing from the Windows\System32 folder:
  • Stdole32.tlb
  • Stdole2.tlb
  • Stdole.tlb

  Follow the steps listed in the article given to solve this problem:

  Error in Ikernel.exe when you install programs using InstallShield

• 1330 error when you try to install the software main street

  Receive the following error message when you try to install the update of the software of Boulevard of Main Street Software, Inc. 2011 on a machine running Windows Vista 64 bit HP.

  File 1330.A error required cannot be installed because the file E:\Blvd\Data1.cab has an invalid digital signature. This may indicate that the file is corrupted. Error 8205 was returned by WinVerifyTrust.

  Another attempt to run this software update received the same message except the last line shows error 24592 was returned by WinVerifyTrust.

  I managed to install the software on a laptop then. I already tried to transfer all the content of DVD on my hard drive, then by running the Setup program, without success. I have also tried to run Setup in Windows XP compatibility mode, receive the same error message.

  It is about a Windows update that has caused similar problems for other users.

  KB978601 causes "signature digital invalid" error with a CAB file
  http://www.win7heads.com/Windows-Update/73744-KB978601-causes-invalid-digital-signature-error-cab-file.html

  If you have this update on your machine, you could try to uninstall via 'Programs and features' and 'View installed updates'.

  There are many other causes mentioned in these links too.

  http://www.Google.com.au/search?q=error+24592+was+returned+by+WinVerifyTrust&SourceID=IE7&RLS=com.Microsoft:-to the: IE-SearchBox & ie = & oe = & redir_esc = & ei = jLYyTJSoIoPJccP6mbYD

  http://www.Google.com.au/search?q=E%3A%5CBlvd%5CData1.cab+has+an+invalid+digital+signature&SourceID=IE7&RLS=com.Microsoft:-to the: IE-SearchBox & ie = & oe = & redir_esc = & ei = p7cyTP2aEc3Jcda52dYD

  What have to say about this, if you contact the software factory?

  The reason why it happens a machine and not the other could be because some of your programs or the system is missing updates, have older versions of the software, or third-party programs interfere with the installation.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/default.aspx/KB/929135

• "Not enough memory is available to process your order" when you try to install the drivers

  Recently, I have problems when you try to install the drivers for a USB mouse that I have. When I plug the mouse, it detects it and tries to install the software but it gives me an error saying he found the software but can't install it because "not enough memory is available to process your order."

  I spent a bit of time, search tries to find a solution to this problem, and I tried a lot of things without success.

  I tried the things:

  -Manually installed the drivers. While I can install them, Windows does not recognize the drivers as being installed and the mouse still not working.

  -The fix IRPStackSize. It was not in the registry, so I thought this might be the solution, but it does not solve my problem.

  -Troubleshooting and repair of Windows Update. I had a memory leak problem with Windows Update, so I thought fix which would cure the problem. I was able to d/l an update that corrects this problem, but it does not solve the driver problem.

  Anyone have any ideas on how to solve this problem? Thanks in advance.

  Hello

  Thank you for your response.

  I appreciate your time.

  I suggest you run the system file checker (SFC) and see if it helps.
  Reference:
  Use the System File Checker tool to repair missing or corrupted system files
  https://support.Microsoft.com/en-us/KB/929833

  System File Checker is a Windows utility that allows users to find corruptions in Windows system files and restore the damaged files.

  Please keep us informed.

  Thank you

• Error 80071 has 30 when you try to install the updates.

  What does it mean error code a 80071, 30 when you try to install the updates

  Hello

  1. are you able to install the updates as soon as possible?

  2 has there been recent changes made on the computer before the show?

  I suggest you to please follow the provided steps and update us with the results.

   

  Method 1: Perform the clean boot and try to install the updates.

  To help resolve the error message, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

   

  Please note: After troubleshooting, be sure to start your computer in normal mode by following step 7.

   

  Method 2: Run (CheckSur.exe) system update readiness tool

  Download and run the system update readiness tool. This tool runs an ad hoc analysis of inconsistencies that might prevent future maintenance operations. For more information about how to download and run the CheckSur.exe tool, click on the number below to view the article in the Microsoft Knowledge Base:

  http://support.Microsoft.com/kb/947821

  (947821) description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2

  Try to install updates again.

  Method 3: How to reset Windows Update components?

  http://support.Microsoft.com/kb/971058

  Registry warning

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/)

  How to back up and restore the registry in Windows.

  Method 4: Scan of the file system (CFS) auditor.

  Perform a scan of the checker (SFC) system files on your computer. SFC tool scans system files and replaces incorrect versions of system files by using the correct versions.

  See the following article for more information on using SFC tool to troubleshoot missing or corrupted system files:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  You can also check the updates failed.

  a. open Windows Update by clicking on the button start. In the search box, type Update, and then in the list of results, click Windows Update.

  (b) in the left pane, click view update history.

  I hope that helps!

• (Windows Vista Home Premium) 800b0100 error code when you try to install the two (KB978338) and (KB968389)

  (Windows Vista Home Premium) 800b0100 error code when you try to install the two (KB978338) and (KB968389)

  I tried all the recommended solutions that Windows can throw at me, and yet I still can't download these updates for some reason any. Whenever I run the program "Microsoft Fixit" he says it's a mistake and fixing it with success, but I still get the same error when you try to install the updates. I have checked for malware, scanning my computer everything and see nothing.

  Hello

  1. what troubleshooting steps are carried out to solve the problem?

  2 were there any hardware or software changes made on the computer before this problem?

  Method 1:

  I suggest you to return the item and check if it helps:

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Method 2:

  Check out the link and check if it works:

  Windows Update error 800b0100

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-800B0100

  Method 3:

  I suggest to put the computer in a clean boot state and then try to open the program and check if it helps.

  Note When you perform a clean boot, you may temporarily lose some functionality. When you start the computer as usual, the function returns. However, you may receive the error message, or you can experience the original behavior.

  How to solve the problem by running the clean boot in Windows Vista:
  http://support.Microsoft.com/kb/929135

  Note: Once you have completed troubleshooting, perform the steps in the step 7: to reset the computer as usual.

   

  Reference:

  You can download updates manually from the link below:

  http://www.Microsoft.com/downloads/en/default.aspx

  It will be useful.