Error to the store after upgrade

Similar Questions

• OBIEE 11 g parse error: error 500 - internal error from the server (after upgrade to 11.1.1.9)

  Hi, I have a problem after the update successfully from 11.1.1.7 to 11.1.1.9. All the upgrade steps are successfully completed. But the analysis is down with the error below. Presentation server seems to be down and will not start. Sometimes it starts and still the same error. Any help would be appreciated.

  Parse error:

  Error 500 - Internal server error

  bifoundation_domain.log / bi_server1 - diagnostics.log

  < 3a6e0f40214b390d:-386ebfa2:14e69d6303c: - 8000-0000000000000023 > < 1436294858264 > < OBI-SEC-00101 > < failed validation of the system – the system user profile user is not found in the identity store.

  oracle.bi.security.service.UserProfileNotFoundException

  at oracle.bi.security.service.URIdentityStoreProvider.getUserProfileHolder(URIdentityStoreProvider.java:378)

  at oracle.bi.security.service.SystemUserValidator.validateSystemUserProfile(SystemUserValidator.java:224)

  in oracle.bi.security.service.SystemUserValidator.access$ 100 (SystemUserValidator.java:32)

  to oracle.bi.security.service.SystemUserValidator$ 1.run(SystemUserValidator.java:116)

  to oracle.bi.security.service.SystemUserValidator$ 1.run(SystemUserValidator.java:110)

  Thank you

  RC

  The problem has been resolved by removing the Active Directory (MSAD) of the list of suppliers and creating a new bisystemuser in the defaultauthenticator.

• Date / time error on the SPA3102 after upgrade to the SW version: 5.1.7 (GW)

  After the upgrade of the software of the date and time of my SPA is taped:

  Current time: 01/01/2003 12:10:11

  and therefore can not save. I tried to change to multiple NTP IE: time.nist.gov or ntp.sipgate.net but nothing gives.

  Anu suggestions how to solve this problem?

  Make sure that the machine is on the internet or that he makes the DNS server addresses.

  You can also try to point to an IP address of the local computer to use his time.

• What happened to the flashlight after upgrade to ios10

  What happened to the flashlight after upgrading to IOS 10

  Flashlight is the control center? I swear that I saw on one of these demo phones in an Apple store.

• Problem with the mapping of the keyboard after upgrading to Fusion 7

  Hello

  I noticed that the keyboard layout has changed in the comments after the upgrade to VMware Fusion version 6 to version 7, even if nothing has changed in the settings "Region and language" in comments Windows 7.  Keys that have changed are "------' with ' < ' and ' | ' with ' > ' everything is OK. The keyboard is configured in Italian

  All the world has noticed the same problem?

  Have you solved?

  Thanks in advance.

  The problem has been resolved by the technical support of vmware with a workaround. They know that the question on the keys is interchangeable in the VM after upgrade to Fusion 7.

  Their development team is currently working on this issue on the priority. This will be fixed in the next update.

  However, they have a work around for the problem of keyboard. Following the instructions below to map the key manually in VMware Fusion.

  : Note make a note of the interchangeable keys in Windows before you enable the mapping of the keys.

  1. click on VMware Fusion-> preferences-> keyboard & mouse-> mappings of keys

  2. make sure that 'Enable key mappings' is enabled

  3. click on '+' sign at the bottom

  4. press the key that you want to send from the text box Mac keyboard

  5. press the key you want to receive on the VM in text box

  Note: You can also use the combination of change, control, Option, command if necessary.

• How can I reinstall the CS6 after upgrading Windows Vista to Windows 10?

  How can I reinstall the CS6 after upgrading Windows Vista to Windows 10?

  Hello

  You can download the Photoshop CS 6 from the below mentioned link.

  Download Creative Suite 6 applications

  Thank you

• Zero error of the client certificate provided is not rooted in the devices certificate store after upgrade to the Horizon view 6

  We have just updated our infrastructure VMware View Horizon of 5.3 to 6.0.1 and all zero clients are provided certificate is not rooted in the devices certificate store.  The certificate on the brokers of the connection has not changed.  Customer relationship connections Horizon view a connection, as well as when we connect to the connection to the server via a web browser.  We had no cert errors before the upgrade.

  You need to add the following as PEM files to fix the problem on the zero client.

  The intermediate certificate - DigiCertCA.crt

  The root - TrustedRoot.crt certificate

• Error in updating the catalog after upgrade to OME 2.0

  Successfully upgraded OME 1.3-> 2.0.

  Refreshed all ranges with success.

  Update the catalog reported following error:

  Import failed Dell Version order catalog for update of the system of ftp://ftp.dell.com/catalog/catalog.cab . Exception message: error: 2627, procedure: usp_PackageApplicable_Comparison_PerDevice, Message: Violation of constraint PRIMARY KEY 'PK_ApplicablePackage '. Cannot insert duplicate in the "Catalog.ApplicablePackage" object key The duplicate key value is (-1109705571, 25, 3550833e-3dbb-f9d6-7162-0c79c477241d, 00460041-0038-0044-4600-330039003700).

  However, it seems he's been through, because now he says that this catalog version is newer.

  This can be ignored?

  Thanks for the question.

  I'll check around to see if it has been seen.  But looks like when you view the version of catalog and the date in the console of OME, it is showing the most up-to-date?

  In the past, when people have lance in something similar they will use SQL Management Studio to smash the old catalog and download the latest version.  The command is:

  DELETE FROM OMEssentials.Catalog.Manifest;

  But if you are not comfortable with playing with the database, you may consider a support ticket to let them take a look.

  The logic of upgrade is supposed to run this command before the new catalog is downloaded.

  Kind regards

  Rob

• Problem with opening Windows store after upgrade to 8.1 Windows

  Original title: cant access window 8 app store

  I had a 8.1 window update to my laptop.but 8 window whenever I try to open appstore, I gives me error that cannot cannot to the authentintion, due to errors, .i tried to open AppStore 3 g, wifi and broadband connection.but I still get the same error.

  Help, please.

  Hello

  Please contact Microsoft Community. I understand that you have a problem with opening Windows store after the upgrade to Windows 8.1. I appreciate your efforts to solve this problem. I've surely you will help solve this problem.

  To better understand the issue, I would need more information on your side.

  1. are you able to open other Apps of metro?
  2. What is the full error message?

  This problem might have occurred because of these reasons:

  1. Corrupt the App Store.
  2. Incorrect settings App.
  3. Corrupt system files.

  Try the steps listed here and see if it helps:

  Method 1:
  I suggest to try the procedure described in the article to reregister the App Store and check if that helps.

  http://blogs.msdn.com/b/notime/archive/2013/10/21/10458031.aspx

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information on how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base.

  Method 2:
  If the problem persists, I suggest you perform the Scan SFC (System File Checker) and check if it helps. SFC scan will search the system files corrupted on the computer and replace them.

  Use the System File Checker tool to repair missing or corrupted system files
  http://support.Microsoft.com/kb/929833/en-us

  Hope this information helps. Reply to the post with an up-to-date report of the issue so that we can help you further.

• Cannot connect to the console of the OAM after upgrading OID to 10.1.4.3

  Hi all
  
  OAM use OID for user store.
  The versions of the components are:
  OID 10.1.4.3
  OAM 10.1.4.3
  
  Recently, I upgraded OID 10.1.4.3 and after that I'm unable to connect to the console of the OAM. However, the OID and OAM services are started without any error.
  
  The error message shown in the access server logs is:
  
  'Directory is inaccessible, downwards, or the incorrect connection settings were specified' userid function ^ LDAPAsyncSimpleBind () ^ cn = sleep
  
  I have modified the parameter LDAPMaxNoOfRetries the value 3 in all components of the OAM and restarted their. The issue is still not resolved.
  Please help if you have seen this behavior.
  
  Thank you
  Mahendra.
  
  Thank you
  Mahendra.

  Hi Manon,.

  Apply under ldif file and restart OID.

  DN: cn = dsaconfig, cn = configsets, cn = oracle internet directory
  ChangeType: modify
  replace: orclinmemfiltprocess
  orclinmemfiltprocess: (|) (! (obuseraccountcontrol=*)) (obuseraccountcontrol = Activated))
  orclinmemfiltprocess: (|) (obuseraccountcontrol = active) (! (obuseraccountcontrol=*)))
  orclinmemfiltprocess:(obapp=groupservcenter) (!) () obdynamicparticipantsset = *))
  orclinmemfiltprocess:(objectClass=oblixworkflowinstance)
  orclinmemfiltprocess:(objectClass=InetOrgPerson)
  orclinmemfiltprocess:(objectClass=oblixorgperson)
  orclinmemfiltprocess:(objectClass=oblixworkflowstepinstance)

  Let me know the result.

  Concerning
  GK Goalla

• Import old box Inbox and sent in the Mail after upgrading to El Capitan

  There has been much discussion about the e-mails lost after upgrade to El Capitan, but I have not seen this particular question.

  I discovered that, like many others, all emails in my Inbox and in my sent folder to leave before the upgrade had disappeared. The issue has not affected the emails I had moved to folders.

  Open the mail library file (in the Finder, hold down the Option key selecting go to the top menu and the library appears), I discovered that Mail was created a new file V2, account, while the old one, V3 (created in 2013), sitting next to her. Go by the size files, it seems fair to assume that the V3 still contains my "lost" emails

  So, I don't know if the bug is that a new V2 should have been created at all, or is it a sync error, or something else. What I know is that when I try to import the items from Inbox and sent from the V3, I get an error message telling me that no mbox valid was found. This is patently false.

  I also tried to copy on an external hard drive, gave them a different name, but even then I couldn't import them. Reconstruction did not help either.

  Anyone able to help? I have a few crucial e-mails out there, and I try to avoid the upgrade...

  

  Address postal (El Capitan): import or export the mailboxes

• I'll always be able to run the opening after upgrade to El Capitan?

  I want to install Office 2016 on my MacBook Pro which is running 10.9.5 - it asks me to upgrade to El Capitan. I'm afraid that Aperture will not work more.

  On El Capitan, you need opening 3.6.  You are currently running opening 3.5.1 or an older version?

  Before you upgrade to el Capitan make a full time Machine backup of you system so that you can return to the Mavericks, if need to be.  (see: OS X El Capitan: revert to a previous version of OS X)

  And check if you are able to update to 3.6 opening.  Check before upgrade you to El Capitan.

  • Open the App Store and sing in your account in the Store with your AppleID menu.
  • The fourth "shopping" tab  Figure opening it to your purchase history?  If so, you can update opening 3.6, once you have upgraded to El Capitan.  If the opening is absent from your purchase history, you will only be able to update with the help of the PapSTore supported.

  See this user Tip: update to Aperture 3.6 after the release of Photos

  https://discussions.Apple.com/docs/doc-8402

  3.6 the opening is the latest version of Aperture and the only one to run on El Capitan.

  There are more and more questions with an opening. Opening 3.6 is running on El Capitan, but keep accumulating the minor bugs.

  • When brushing the adjustments, the position may be a bit off, a pixel or so.
  • The thumbnails in the list view are backwards.  Re: opening and El Capitan OSX
  • If you add a curves adjustment, adjustment to straighten will be not visible in the exported images. See: right
  • The link to the plug-ins page work is no longer in the opening menu, but it's the same for all versions.

  And you can order are no longer produced printouts of Aperture. Apple has stopped completely, the support for Aperture print products in any version of Aperture.

• Intel technology quick start error in event visors after upgrade to Windows 10

  Hello

  I get questions with technology Intel Rapid Start after upgrade my Portege Z30t-A-103 to 10 Windows.

  The Windows Event Viewer shows:

  irstrtsv
  Error: Cannot read LBA sector directly

  I tried to disable the technology Intel Rapid boot from the BIOS, but it seems that the problem is not resolved.

  Any ideas?. I guess that an Intel Rapid Start driver technology is coming.

  Kind regards

  Intel might be the point to approve their Windows 10 pilots, at the same time just keep it disabled in BIOS for now.

• ProBook 450 G1: Question of Probook of video playback in G1 of the 450 after upgrade to Windows 10

  Hello.

  Issues (stop, shaking in the video and sound) are multiply video playback after upgrade Windows 8.1 for Windows 10.

  Questions for:

  -Playback (avi, mkv, mp4 etc.) VMP Movies & TV AND;

  -Playback of video from Youtube by Edge and IE11;

  -Video playback in games.

  NO problem all does to (workaround):

  -Reading of files (avi, mkv, mp4 etc) by VLC player.

  -Video playback from Youtube through Firefox.

  Not any way to workaround that emit in the games: its integrated use of resources of the browser.

  VLC uses own video codecs, so I think that this emission source is possibly in embedded Windows 10 codecs?

  Drivers:

  Intel SoftPaq Download Manager Video drivers (latest for Windows 10: technical support site the same as at HP).

  AMD drivers for Widnows 10 SoftPaq Download Manager (the same that at HP supports the site) is buggy and causes crash (the "internal power error"). If Catalyst drivers from AMD (latest from Windows 10) site.

  Additional drivers, also upgraded for Windows 10 (via the SDM for Windows-10): chipset keeps drivers, WiFi, 3D etc.

  Any ideas?

  Problem has been resolved by unistalling HD Audio drivers (installed on Windows 8.1 early HP).

  After the reboot, the drivers HD Audio was automatically installed and then updated via Windows Update.

  Video playback is now correct through no fault inside any software (IE, edge, WMP etc.).

• Impossible to deploy the model after upgrading to vCenter v4_1

  Hi all

  I updated vCenter Server from version 4.0 to v4.1 and re-registers the hosts.
  Virtual machines are working well and are able to collect data on performance.

  However, when I tried to deploy the model, error occurred and failed to deploy the model.

  (This model were made to vCenter v4.0 environment, before moving on to vCenter v4.1).

  My client needs deploy the model so that it can create a new server next week...

  I looked to the top of the Knowledge Base and found the following information.

  ----------------------------------------------------

  Knockout No. 1036224
  VMware KB after upgrading to vCenter Server 4_0 to 4_1, deployment of a model with a comments customization fails

  http://KB.VMware.com/selfservice/microsites/search.do?cmd=displayKC & docType = kc & externalId = 1036224 & sliceId = 1 & docTypeID = DT_KB_1_1 & dialogID = 321118019 & StateID = 1 0 321114529

  ----------------------------------------------------

  If there is anyone who has solved this problem by following the procedures written in this KB, could you tell me at what level you updated VMware tools for?
  In addition, was the update of the virtual hardware to solve this problem?
  (I hope that the material of the VM is v7, which is the last for ESXv.4.0, update the virtual hardware is not required in my environment :)

  Thanks for you information in advance!

  
  < environment >
  Before the upgrade: vCenter Server * v4.0*, ESX v4.0.0, v7 (latest) of Virtual Machine hardware,.
  After upgrade: vCenter Server * v4.1*, ESX v4.0.0, v7 (latest) of Virtual Machine hardware
  (I've specifically updated only the vCenter server and ESX and VM(Windows/Linux) are not updated).

  Hello

  Try to convert the template to a virtual machine, then new - VM model.

  Sounds strange, but it works for us