spooler/printer HP 2210

Similar Questions

• spooler print does not preach

  When I want to print, there is a message that the spooler printing is not enabled.

  I go to computer management, Services, and spooler = activate automatically.

  It makes no difference

  Hello

  See this page to select your language:

  http://support.Microsoft.com/common/international.aspx

  ====================================

  Or sorry that it is area English.

  Left click at the bottom of the Microsoft Community page

  English and set your language.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Spool print will not be started.

  My spool print will not run.  I went and restarted and it won't stay running.  I try to add a printer, and he says he can't because spool it printing stops again.  Would it be useful to reinstall windows?

  My spool print will not run.  I went and restarted and it won't stay running.  I try to add a printer, and he says he can't because spool it printing stops again.  Would it be useful to reinstall windows?

  It would probably help if you reinstalled Windows, but this is a drastic measure and almost certainly useless to take in response to this error.

  When you restart the print spooler, it immediately turning off or only when you try to print?

  Assuming that you have an up-to-date antivirus application and have recently scanned withMalwareBytes Antimalware and SUPERAntiSpyware as you are reasonably confident that your computer is free of malware, the most likely reasons for the print spooler not running are a corrupt print job stuck in the queue or a damaged printer driver.

  Follow the directions here: http://www.coribright.com/windows/Article_One.htm

  If you had or have a Lexmark printer, check out these instructions: http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm

• Print spooler print server 2008 crash with file hpb6sy2917_x64gui.dll error

  Print spooler print server 2008 crash with file hpb6sy2917_x64gui.dll error

  This happened on 02/10/15 and happened again on 24/02/16. We have two printers that depend on this file. HP Color LaserJet 553 and HP LaserJet M604. I have over a hundred of the M604 on my network and the last time that this happened, it dominoed across the print server system.  This has also caused some spools of printing stop on end users. The only way I can get end users up is to uninstall the driver package.

  This issue affects the Windows Server 2008 and windows computers 7 as well.  Try to determine why this has happened twice and determine how fixit before the rest of my Server 2008 and end down as well.

  The error lies in the hpb6sy2917_x64gui.dll.

  

  This time I had to remove the printers and drivers with a regedit. I also deleted all files in all files for 2917 in the

  C:\Windows\System32\spool\drivers\x64\3 folder. But this time, when I reinstall the M604 M553 drivers and it lowers again print server spooler. I'm frustrated to say the least.

  I tried clearing forcefully queues by deleting files in C:\WINDOWS\System32\spool\PRINTERS

  Hello

  According to the description of the problem, you work in the Windows Server 2008 domain environment. So, I suggest you to republish your query on the TechNet forum, which is run by the other IT professionals who are trained on the server issues. However, you can try to run the REG file that was downloaded in the link provided by Ramesh Srinivasan in his position, responded on June 2, 2012 in the thread link provided below and see if it helps you to solve the problem.

  Deleted print spooler service

  http://social.technet.Microsoft.com/forums/Windows/en-us/9d0bd665-621d-449E-a22f-b512e068ba2a/print-spooler-service-removed

  If the problem persists, try to repost your query on TechNet forum. Keep us.

  Kind regards

• blocking server spooler print when give print from domain account

  When a domain gives impression then the print server spooler user hang from person able to print in order to restart the print server address

  Hi Rakeshco,

  Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows XP Networking forum.

  http://social.technet.Microsoft.com/forums/en-us/category/windowsxpitpro

  I hope this helps.

• pilot of spool printing does not start

  I clicked on Start / Settings / Control Panel / Administrative Tools / Component Services

  Then I clicked on Standard down and scroll to the bottom of the print spooler services list and made sure it was automatic. Then I started the service, but when I went back to the printer folder in the Control Panel, to add a printer, the print spooler would stop.

  I clicked on Start / Settings / Control Panel / Administrative Tools / Component Services

  Then I clicked on Standard down and scroll to the bottom of the print spooler services list and made sure it was automatic. Then I started the service, but when I went back to the printer folder in the Control Panel, to add a printer, the print spooler would stop.

  There are generally 2 reasons that cause the print spooler to stop: a printer driver damaged or corrupted a print job.  It is also possible that the malware has caused this, so you'd be wise to scan your system with these two free scanners:

  MalwareBytes Anti-Malware
  SUPERAntiSpyware

  Download, install, update and run each.  Do not do both at the same time.  Each will take a while, depending on the size of your hard disk drive, so have a few tasks not computer lined up after the start of the analysis.

  Malware side, here are the steps to clean your printer drivers and the possible corruption of print jobs.

  First, stop the print spooler.  You can do it using the tool Services even you know.

  Scroll down to the print spooler, and then click Stop
  Open a Windows Explorer window and enter the following in the address box:
  C:\Windows\system32\spool\PRINTERS
  Delete all files in this folder, but do not delete the PRINTERS folder itself.

  Then, follow the instructions here to clean and reinstall your printer drivers: Article 1.  If you have a Lexmark printer, follow the instructions here instead (they are essentially the same, but includes a few additional steps for printers Lexmark).

• Spooling printer on my computer become really, really slow it normal months ago, just changed now, sometimes I wait until 50 seconds

  I have a Pentium 4 under Windows Vista Basic. He printed always good, but all of a sudden it started to do the very slow queue

  Hello

  -Have you made any changes to your printer / computer after which the problem started?
  -What is the serial number and model of the printer?

  Follow these steps and check if the problem persists.

  Step 1:

  Update drivers from the manufacturer's website and check if this is useful.

  Step 2:

  Restart the spooler service and check if this is useful.

  Step 3:

  Temporarily disable all security software and check if that helps.

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  WARNING:
  Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

• Problems of spooling print

  I have a computer Dell Lap Top with Windows Vista.  I also have an Epson NX515 printer that is only about a year and works fine with other computers. I said representatives technical Espon my Dell Pat Top has a spool of printer issue that comes down to microsoft.

  What are the tasks need to be done to solve this problem?

  Hi whillsgr,

  1. What happens when you try to print? You receive an error message?
  2. Did you the latest changes on the computer?

  A print spooler is a system service that temporarily stores the disk printing hard or in memory until the printer is ready to print. If you were expecting an abnormally long time to print a document, or if you see an error message about the print spooler, Spooler subsystem or spooler resources, you might need to change and then restart the print spooler service on your computer.

  You check the status of the desktop print spooler service and make sure it is running.

  You must be logged on as administrator to perform these steps.

  1. Open administrative tools by clicking the Start button, click Control Panel, clicking system and Maintenance, and then clicking Administrative Tools.
  2. Double-click Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  3. Right click on the print spooler service, and then click Properties.
  4. Under the tab general , next to Startup type, make sure that Automatic is selected.
  5. If the service is not already running, under Service status, click Startand then click OK. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  You can also try to launch the printing on the computer Troubleshooter and check if it helps.

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

   

  You can also refer to the frequently asked Questions of the Epson site and check if it helps.

• HP Officejet Pro 8610: Deleting a document of spooling print

  Help! I have a paper stuck in spooling it print. I tried everything I can think but cannot get rid of it. I need to print other documents as soon as possible and am short on time.

  Hello

  Follow the HP print and Scan Doctor below by selecting difficulty Printing, which should erase any document of the coil:

  http://h20180.www2.HP.com/apps/NAV?h_pagetype=s-926&h_lang=en&h_client=s-h-E016-1&h_keyword=DG-PDU

  Kind regards

  Shlomi

• Windows cannot open spool print

  I ran that the scan for vista function and the report I have files corrupted on my hard drive and which cannot be resolved.  What can I do to fix the corrupted files which, I believe, will fix my printer spool problems.

  Hi mpcaseyclue,

  As mentioned the mistake that this is a problem of print spooler. You can check that the print spooler service is running. To do this, follow these steps:

  1. Click Startand then right-click my computerand clickManage.
  2. Expand Services and Applicationsand then click Services.
  3. In the Details pane, right-click the print spooler service, and then click Start (if it is stopped).
  4. If its already in road mode right click on the service and click on restart.
  5. Output of computer management.

  If you have run a sfc /scan and it says that you have files corrupted on the best computer must run theSystem Update tool and if this also doesn't help not you will have to do an inplace upgrade.

  Let me know if you get an error with the print spooler service.

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.] This announcement is in my opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS and is provided without warranty and not an entitlement.

• Lexmark x 6500 Series Wireless restarts spool printing work

  Hello

  you have a 6500 x series printer that prints only after that I have to restart the print spooler in services. I chatted with lexmark and went thru uninstall the drivers etc reset the spooler using fixit. When I print I get no error message on spooler not started until, as far as its concerned he's working

  http://Windows.Microsoft.com/en-AU/Windows-Vista/troubleshoot-printer-problems

  Solve information problems the printer at the link above.

  http://support.Microsoft.com/GP/printing_problems

  Read the information above from Microsoft about fixing printer problems.

  There is a very useful 'Fix - It' there as well as a list of what it fixes.

  http://support.Microsoft.com/kb/2000007/en-us

  Solve printing problems by resetting the print spooler

  I hope that the information above solves printing problems you encounter.

  See you soon.

  Mick Murphy - Microsoft partner

• spooler printing error 1297 in order to function properly does not exist.

  missing Printer Spooler vista

  Here's a thread on this problem.  Read the whole thing - not only the answers because valid responses are not marked as answers (because they came much later than the first reactions and perhaps even better than the initial responses that seem generic enough). http://social.technet.microsoft.com/forums/en-US/itprovistaprinting/thread/cad5221a-d21b-4bf0-8e86-cacae254cb52/.

  If this does not work, here is another thread with other responses and recommendations about this problem: http://social.technet.microsoft.com/forums/en-US/itprovistaprinting/thread/391f3c57-5d2b-4e88-adc6-190429a7fdbe/.

  I hope that one of the options presented in one of these two threads will try to solve your problem.

  I hope this helps.

  Good luck! Lorien - MCSA/MCSE/network + / A +.

• Spooler printer error 1068: dependency or group Service was able to start

  Original title: Error 1068

  I had this problem with error 1068"the dependency service or group could start.

  Background - I tried to add a printer that is installed on another PC on the network. When I clicked on add a printer, I get the message. "Windows can't open add printer." The local print spooler service is not running. : rental restart the spooler or restart the machine. "Restart the PC has not resolved it so I did a little research and it said to go to"administrative tools then 'Services' then 'print spooler'. " "I did and when I click on start it flashes a message"Windows is trying to start the service on the local computer"then immediately puts the message 'Windows is unable to start the Service on the local computer print spooler' error 1068: dependency or group Service was able to start.

  I tried to do a restore to many dates with no luck at all.

  I tried to install the printer directly to the computer... no luck when I went to install the drivers on the CD, I'll even "Windows can't open add printer." The local print spooler service is not running. : rental restart the spooler or restart the machine. "message.

  2 local PC repair shops have no idea which will resolve...

  Any help will be appreciated operating system is Windows 7 Premium Home edition is installed on an Acer Aspire.

  In the default installation, the values must be RPCSS and http. However, it works fine even without http as a dependency. I guess that the http driver is the problem (not start) in your PC, and elimination of the dependence of spooler should do the trick.

• Windows spooler printer 8 error 1068: the dependency service or group could start.

  Just upgraded to Win 8 ENT x 64 Win 7 ENT x 64.

  I thought, maybe I need to restart the service. Go in Services, look to the top of print spooler and select restart.
  But I get an error:

  "Windows failed to start the Service on local computer print spooler.
  Error 1068: The dependency service or group could start.

  "Okay, so I go into properties and see what are the dependencies.
  Attached image:
  

  RPC is running, however, no FAX.
  Go to Fax and just getting started. I get the error 1068
  Focus on dependencies here.
  Attached image:
  

  IM lost at the moment.
  Any help would be greatly appreciated.

  I ran sfc/scannow and found no problem.

  Please notify.

  I found this somewhere else and this fixed my problem

  I had the same problem and I have created a batch file that I have run as Administrator:

  CMD /K SC CONFIG SPOOLER DEPEND = RPCSS

• Spool print not that does not exist

  Hello

  I have this problem with the coil of printing in Windows 8 Pro Services. This service does not exist in the services. How can I get it back? I can not install anything related to printers without it.
  PS: the problem is that he is not arrested, but there was none.
  My best regards.
  Rafik

  Hi Rapheek,

  Thanks for joining us again.

  You must copy and paste all the commands written in "BOLD" from the previous post on a Notepad and name the file as spooler.reg and save it to the desktop. Then double-click to run the file. This would create the print spooler service.

  Let us know the status of the issue.