Essbase Server flashes and disaapears?

Similar Questions

• Disappear and Essbase Server flashes

  I have everything,
  
  I use 9.3.1 on windows 2003 server version. Today when I tried to start my server essbase it just flashes and disappears and not starting. I even restarted twice but has no luck. Any body in the face of this problem before? Please let me know what steps I need to take to set up my essbase server.
  
  Ragards,
  Assini

  Hello

  This error means generally that there is a problem of path

  If you open a command prompt and type % arborpath % :-echo

  If nothing is returned, you need to add an environment variable.

  Control Panel > system > advanced > environment variables > new system variable

  variable name: ARBORPATH
  variable value: D:\Hyperion\AnalyticServices\

  Also change the path variable and add: -; %ARBORPATH%\BIN

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• The Essbase server often and blocking down

  Hello
  
  We are facing problem of server Essbase often down and system hang all of a sudden. Sometimes he goes on one day and then crashes. Sometimes within the hour.
  We noticed sometimes when we run business rule or open the financial report (workspace), the server goes down. Is there anyone facing the same issue?
  any resolution would be grateful
  
  
  
  Note:
  specification: essbase 11.1.1.3 and oracle 10 G installation of Red Hat Enterprise Linux version 4 and all the other product in Windows Server 2003 SP2 64-bit
  
  
  
  Thank you

  If your server down, hang and reboot tray turn off hyperthreading bios Setup
  I think that this problem is not application

• Since I upgraded to 7.01 (linux xubuntu) firefox seems to crash, but only on the pages have something to do with Flash. I served flash and reinstalled and it seemed to fix, but is happening again today. Is there something I can do to fix this?

  I have Linux Xubuntu.
  I had 11.04, but upgraded to 11.10. bold text
  I've never had a problem with firefox until I upgraded to firefox 7. I've always made changes to about: config and went through my edits and none is related to this.
  I just checked on: fails and I had 34 accidents since the upgrade on 11.10.11
  Fix on the 13th, it seemed to me that there can be no planting until the 17th and it was through flash and then purge by reinstalling the necessary packages.

  I solved this problem by disabling hardware acceleration. At the time where I went down as my flash 10 (instead of 11).
  This option is no longer available. But disable hardware acceleration seemed to fix it.

• How can I delete the previous configuration of Essbase Server Shared Services?

  Hi all

  I am trying to reinstall the Essbase Server (on a new server we have upgraded the Essbase server hardware) and reloads the data, but the current installation believes that I have already set up despite the withdrawal EssbaseCluster-1 of Shared Services Application groups.  Is there something else I need to do to get the new install Essbase server configured as a new instance of Essbase?

  Thank you
  Ryan

  If the server names have been changed, then it probably won't work, but I don't know what you mean that it did not work, you should check the registry of shared services, other possibilities are reset configuration tasks in the registry by using the epmsys_registry utility.

  See you soon

  John

  http://John-Goodwin.blogspot.com/

• Unable to connect to the management console essbase server,

  Hi all..

  After having managed completely the installation and configuration of essbase 11.1.2.3 iam unable to connect to the management console essbase server,

  and also, when connecting to the oracle database, he says 'not found oracle. "

  Essbase 11.1.2.3 is installed in windows server 2008 R1.

  kindly help us.

  OK so Essbase is now running, so you should be able to test a connection through Maxl, run c:\Oracle\Middleware\user_projects\epmsystem1\EssbaseServer\essbaseserver1\bin\startMaxl.bat

  e.g. login password admin on ServerName.

  See you soon

  John

  http://John-Goodwin.blogspot.com/

• Cannot start the Essbase Server

  Hi all
  
  Yesterday, I installed the OEPM 11.1.1.3 and was able to install and configure Essbase, Shared Services and planning.
  Even I accessed applications to sample (Sample-> basic). Today when I tried to access open console its raise an error.
  I stopped the essbase server service and tried to boot from the start menu. But the essbase server does not start. I checked the newspapers D:\Hyperion\logs\essbase and gives the following messages:
  
  [Mon 23 Nov 17:37:09 2009] Local/ESSBASE0 / / / Info (1051283)
  Recovery of license information, please wait...
  
  [Mon 23 Nov 17:37:09 2009] Local/ESSBASE0 / / / Info (1051286)
  The license retrieved information.
  
  [Mon 23 Nov 17:37:24 2009] Local/ESSBASE0 / / / Error (1051223)
  Single Sign-On [css_init] function call failed with error [error CSS: CSS method invocation of error: com.hyperion.css.CSSSystem < init >.]
  
  [Mon 23 Nov 17:37:24 2009] Local/ESSBASE0 / / / Info (1051198)
  Single Sign-On initialization failed!
  
  [Mon 23 Nov 17:37:30 2009] Local/ESSBASE0 / / / Info (1051232)
  
  Using English_UnitedStates.Latin1@Binary as the locale Essbase
  
  
  [Mon 23 Nov 17:37:31 2009] Local/ESSBASE0 / / / Error (1051527)
  Shared Services security mode it is not possible to start Essbase during SSO to the initialization fails.
  
  
  And also there is a file by name "SharedServices_Security_Client.log", where the content of it is as below.
  
  "2009-11-23 17:37:11, 687 INFO [hand] CSS is initialized as a customer. Properties default logger will be responsible com.hyperion.css.CSSSystem. < init >(Unknown Source)
  2009-11-23 17:37:11, 703 INFO [hand] CSS log file will be generated in the com.hyperion.css.CSSSystem D:\Hyperion\logs\essbase\SharedServices_Security_Client.log. < init >(Unknown Source)
  2009-11-23 17:37:11, 703 INFO [hand] set up CSS with registry com.hyperion.css.CSSSystem.initCSSSystem (unknown Source)
  2009-11-23 17:37:11, 703 INFO [hand] CSS to initialize the registry. com.hyperion.css.common.configuration.CSSConfigurationManager.getConfiguration (unknown Source)
  2009-11-23 17:37:11, 859 INFO [hand], trying to get registry Instance com.hyperion.css.registry.RegistryManager. < init >(Unknown Source)
  2009-11-23 17:37:24, 515 ERROR [main] 20:1092: failed to initialize the EPM system registry. [Root Cause: hyperion.jdbc.base.BaseSQLException: error [Hyperion] [Oracle JDBC Driver] establishing socket to host and port: ibm:1521.] [Reason: Connection refused: connect] com.hyperion.css.registry.RegistryManager. < init >(Unknown Source)
  2009-11-23 17:37:24, 515 ERROR [hand] Arguments: param1 = {}, param2 = null, param3 = D:\Hyperion\logs\essbase\, com.hyperion.css.CSSSystem.initCSSSystem (unknown Source)
  2009-11-23 17:37:24, 515 INFO [main] CSS system initialization has failed. : [ms 13047] com.hyperion.css.CSSSystem.initCSSSystem (unknown Source)
  
  
  Please advice how to solve this problem.

  Hello

  He has problems communicating with your Oracle database where shared Services of / registry is located.
  Connection refused from ibm:1521
  This could be up to oracle not in place and running, a network problem, a firewall problem.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• After installing my essbase of planning server just flashes and turns off

  Dear all,
  
  Until yesterday, everything worked well.
  After installing my essbase of planning server just flashes and goes out.
  I use win xp, system9.3.1.
  
  ARBORPATH: D:\Hyperion\AnalyticServices;D:\Hyperion/common/EssbaseRTC/9.3.1
  HYPERION_HOME: D:\Hyperion
  PATH:D:\Hyperion\AnalyticServices\bin;%HYPERION_HOME%\common\ODBC\Merant\5.2\Drivers;D:\Hyperion\AnalyticIntegrationServices\bin;D:\Hyperion/common/EssbaseRTC/9.3.1/bin;D:\Hyperion\common\CLS\9.3.1\bin\windows
  PLANNING_HOME: D:\Hyperion\Planning.
  
  Thank you
  Vikash

  You have made the right choice.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• How not to create a partition on an essbase server without using the domain name and the port using the MXL script?

  Hi guys,.

  We know that we can create partitions on the SERVER NAME, SERVER. AREA: PORT only and ESSBASECLUSTERN founded through the Regional service CONSOLE.

  Now my question is how to do the same to CREATE or REPLACE the PARTITION script.   By default, it's get created using SERVER. AREA: PORT only.

  Here is my script that I use to create a partion.

  CREATE or REPLACE REPLICATE one PARTITION "xxxx". "' xxxx ' AREA 'xxxxxxxx' SOURCEAREA to 'xxxx '. "' XXXX ' to 'WZ00339D' AS 'xxxxx' IDENTIFIED BY 'xxxxxxx' AREA"xxxxxx ";

  
  

  Where WZ00339D is my name of essbase server.

  
  

  Put it in the script is the following.

  WARNING - 1023052 - Partition [WZ00339D:1423 Bullseye Sales] is not valid.

  But the partition is created on essbase app - database with the SERVER. AREA: port only.

  Partition part of orphaned partitions as am I try to open the partition under the name of the SERVER not only through the SERVER. Average Doman:port.

  Partition be created under title

  [WZ00339D.DOMAIN.com:1423.App.DB]-> [WZ00339D.DOMAIN.com:1423.App.DB]

  FYI, the user id used as logins are created by using domain - they are not native users.

  Please let me know how I have to have the syntax so that I can create a partition just as I help Regional service on the name of the SERVER console only.

  Let me know I can provide more information, the entire reason to use a script to create a partition is to refresh the score by a fall and create a partition.

  Roman

  I solved this problem.

  Its very simple all my code and approach was right.

  Everything I did wrong is an active directory account to create the partition and check used a native account on EAS. If you log in with the account active directory - the partition is under the name of SERVER only.

• Basic knowledge on Essbase Server and Administration Services

  Hello
  
  I'm a newbie to the Essbase. I'm trying to figure out the difference between the server and Services.I got very confused.
  
  Please clarify my understanding
  
  Essbase server - this is a server where Essbase stores all the data.
  
  Essbase Administration Services - it is an agent used to communicate with the Essbase server from the end before (administration Console)
  
  Admin Console - it is a front-end client used to connect to different servers Essbase. It is possible to have Essbase servers to be installed on different computers.
  
  Before connecting to the client management console, we should make sure Server Essbase and Essbase Administration SErvices are running
  
  Thank you
  Arun

  Hello friend
  What ever you say on essbase and EAS server is correct. If you want more explanation on this please take a look on essbase architecture see this link that gives you a better idea

  http://gerardnico.com/wiki/EPM/Essbase/essbase_architecture

  It is not necessary that the server Essbase and EAS are on the same machine.we can add different servers in the Regional service console.

  Regarding your last question (before connecting to the administration console client that we should ensure that Essbase server and Essbase Administration SErvices are up and running)

  Before logon to EA please make sure that this server essbase, openldap and essbase admin services are running

  Thank you
  REDA

• 1025nw Jam in Drum area - attention LED still flashes and cannot print the test page

  My Laserjet PRO CP1025nw is only 3 weeks. Everything was normal until I met a paper jam today. I removed the damaged document by opening the back cover and the piece of paper remaining from the feeder. But still, printer flashes driving caution.

  I turned the printer off and then back on and tried the instructions in the user manual to clear paper jams. When I turn on the printer, all lights are turning ON one (as the normal boot sequence) and then warning led flashes. I couldn't hear any engine wheelchair or his mechanics during this process. Web server page printer (with wifi) showed the status of the printer as "jam in the drum area.  I removed and re-inserted Imaging drum by following the instructions to replace the imaging drum.

  What I see after turning on th eprinter is just attention light flashing and I can't even print a test page. I don't hear any rotation of the engine sound of the printer. Pleas help me out of this problem.

  I solved the problem myself. Although I couldn't find any piece of paper left by normal inspection of the outside of the printer, I removed the Assembly / separation and roll pick-up from the input tray to find a small piece of paper remaining on the paper sensor flag. Very hard or literally impossible to find something in this place by the normal health check.

  To eliminate the epickup roll pre-assembled under th eprinter th, I removed the right side panel and the left side panel for th eprinter. I was happy to see the piece of paper that has ruined my day quiete. Deleted and everything set up as before and successfully took a test page print.

  Thank you for repair of HP, which led me to get inside the printer.

• I would like to know how to install Windows Server 2008 and Windows 7 Enterprise from a USB key, please.

  I would like to know how to install Windows Server 2008 and Windows 7 Enterprise from a USB key, please.

  I'm not trying to run either on the USB key, I just need to know how to install from a USB key. I tried Multiboot, grub for DOS and other, but they do not seem to work :/

  I am going through a book that uses these two to form Microsoft MCITP: Server 2008 Administrator and if I could install these Via USB, this would save my records and a lot of hassle... basically just for convenience, as everything that I need will be on a stick * lol *.

  Otherwise, I'll have to use discs instead :)

  Take a look at this:

  http://www.Haiders.NET/post/installing-Windows-Server-2008-from-a-USB-Flash-pen-drive.aspx

  Like to make a bootable USB with WIndows 7, take a look to use the following:

  Download Windows 7 USB/DVD tool

  http://store.Microsoft.com/help/ISO-tool

• Essbase Server (EAS) crash (crash)

  Hello

  I am in favour of Hyperion Essbase (EMP 11.1.2.1). Web services and the EAS are on different physical servers.

  Recently, the EAS seems to hang abruptly, which leads to the stop suddenly work planned on the Essbase cubes and attempts to failure of all users to load data.

  So far, we have discussed THIS by restarting the server with installed EAS, whenever the EAS breaks down. I went through all the papers I thought would give me details of what causes the crash.

  Please help with a permanent solution, to shed light on which log files can also check to find the root cause.

  Thank you

  Joseph Meljin

  I think that you keep confusing EAS and Essbase server but anyway if you want to the top of the JAVA virtual machine for Regional service, and then in the registry, go to EssbaseAdminServices0 like your screenshot, update the - Xmx to a value higher than for example - Xmx2048m, don't know what you have it set at the moment. restart the Regional service.

  If you have several EAS servers you will need to repeat on each, also change all the settings until you are sure have the ability of memory on the server.

  See you soon

  John

• Failed to connect to the ESSBASE server &amp; opmn was able to start

  Dear all,

  I couldn't connect to Essbase server and a service to opmn works not as well. Hard at this issue not accessible planning application, kindly help us this is very urgent and very crucial for us.

  Here are the controls and exit (Please find logs attached):

  The message is EASconsole below:

  ========================

  Error: 103: unexpected error Essbase 1030818

  Error: 1042006: error network [10061]: unable to connect to [XXXXXXXXXX.

  1. DS.
  2. XXXXXXXXXX.

  [local: 1423]

  Error: 1030818: failed to connect. Please check if the server and port are correct. If you receive timeout or handshake failure, please check if you have tried to connect to secure the port without keyword secure or disable the port with the secure key word.

  Of MAXL:

  ========

  Essbase MaxL Shell 64 bit - version 11.1.2 (ESB11.1.2.4.000B193)

  Copyright (c) 2000, 2015, Oracle and/or its affiliates.

  All rights reserved.

  MAXL > connection;

  Enter the user name > admin

  Enter the password > *.

  Enter the host > XXXXXXXXXX

  ""

  ERROR - 103 - Essbase unexpected error 1030818.

  Error - 1042006 - network [10061]: unable to connect to [XXXXXXXXXX.d

  1. s.XXXXXXXXXX.local:1423].

  ERROR - 1030818 - login failed. Please check if the server and port are correct.

  If you receive timeout or handshake failure, please check if you have tried a bitch

  CT to secure without keyword secure or clear with the keyword secure port...

  MAXL >

  Cmd prompt try everything to start opmn below is the message:

  ======================================

  Microsoft Windows [Version 6.1.7601]

  Copyright (c) 2009 Microsoft Corporation. All rights reserved.

  C:\Users\hyptstadmingdc > cd C:\Oracle\Middleware\user_projects\epmsystem1\bin

  C:\Oracle\Middleware\user_projects\epmsystem1\bin > opmnctl status

  opmnctl status: opmn is not running.

  C:\Oracle\Middleware\user_projects\epmsystem1\bin > opmnctl startall

  opmnctl startall: from opmn and managed all process...

  opmnctl startall: opmn was able to start.

  C:\Oracle\Middleware\user_projects\epmsystem1\bin >

  

  Hi all

  Problem was solved after reinstall & reconfig (without uninstalling) box-2, after that I could use planning an application as usual without error.

  Kind regards

• Unable to connect to Essbase server through smartview - network error

  Hello

  I installed and configured 11.1.2.3 EMP:

  APS - Windows Server

  Essbase Server - Linux

  I tested the connection between the Regional and Essbase service Console and it works fine,

  When I tried to connect via SmartView Essbase I got the following error message:

  «Unable to connect to the server of Essbase.» "Error: Essbase Error (1042003): [11001] network error: impossible to retrieve the information of the name of [EssbaseCluster-1].

  I will be very happy for suggestions,

  Thank you

  Yuval

  The problem has been resolved.

  I discovered that it was with Linux server, I could configure the Essbase server from Windows server to Windows server while it was certainly the problem of Linux.

  To solve it, I had to re - install Linux server, I configured the Essbase server and she succeeded. I don't know what was the reason for the issuance of the periphery, but I guess that there is a missing package installed on Linux server and this cause of the wrong configuration.

  Yuval