Essbase Studio Console cannot connect remotely to Essbase Studio Server

Similar Questions

• Cannot connect to the integrated Web server

  I have a HP p1606dn printer I need to change the IP address. I can't connect to SAP by using the IP address of the printer configuration page. I also tried on a work of the same model printer and cannot connect. I can't understand what I'm doing wrong. I type in xxx.xxx.xx.xxx in the address bar in Internet Explorer which is supposed to be an approved browser. Thank you!

  If the Web integrated printer server does not load when the IP address is entered, then means generally is not a direct path between the printer and the computer is trying to access.

  You mentioned that you must change the IP address.  What is the reason for this change?  The network IP addressing scheme changed so that the PC and the printer may appear as on different networks?

  I don't know if it will work in your particular situation, because it depends on whether or not it has access to an Ethernet connection.  You could try the connected printer to an Ethernet port which would be on the same network as the PC and then access it by IP addressed assigned to the Ethernet address.  Once the integrated Web server load, you can manually set the wifi information and then return to the wifi.

• View 5.0 upgrade cannot connect through security on PCOIP server but RDP works very well

  We have improved the sight of 4.6 to 5 and we are no longer able to connect through pcoip via security server. When you connect remotely if you select rdp everything works fine, but pcoip goes to a black screen and then return and error message of 'the connection to the remote computer is done '. Everything worked well in 4.6 before the upgrade and no settings have been changed. Any help would be greatly appreciated... Thank you

  Just had this problem, same solution, external IP had changed its internal IP DMZ, it switched back - totally fixed.

• Cannot connect remotely to an external hard drive on iMac

  I have trouble connecting to remote a Macbook (10.10.5) of an external HARD drive mounted which is connected to an iMac (Mac OS X 10.10.5.) The iMac is connected to the internet via an airport express base station 7.6.4.

  I created an account of sharing only to connect to this drive and I've had no success connecting to it outside the local network of this external hard drive.

  Because the Terminal airport express base station is involved, y at - it sort of port forwarding for connect to this hard drive mounting?

  I've only tried to plug the hard disk via finder > go > connect to server > name.local/locationOfExternalHarddrive of the computer and have had no success so I think the explicit base station is the question?

  Any advice is greatly appreciated!

  I've only tried to plug the hard disk via finder > go > connect to server > computer name.local/locationOfExternalHarddrive

  This is assuming you have CCMM configuration and working properly... without it, Wan, there is no way that the computer can find computername.local

  You need the public IP address of the router... and there may be only a single router. Normally, it is not possible to use IP because it is dynamic, with a home ISP accounts then you must configure the global DNS name or a dynamic DNS account.

  Please read Tesserax doco on remote... the best method is Apple CCMM.

  Airport drive - remote (3 methods)

  A simpler method in my humble OPINION is teamviewer... same as Apple CCMM without as many restrictions.

  Any method of remote access requires a careful configuration of the home network. And the Mac must be able to wake on lan... (apple have their own fancy name for it).

• Cannot connect remotely via VPN since installing the new modem/router

  Can anyone help please. Since the acquisition of a new router / modem I can no longer connect via VPN to my work PC remotely. It comes in I receive the error message. Can someone tell me if I need to change the settings for the new modem / router to access?

  

  Hello Joanna,

  Here are the steps you need to do first:

  1. Off static IP for my server and let the router assign IP address and changed the IP address of the port forward.
  2. Check the IP address because obviously, that changed when you plugged into the router again.
  3. Updated to the latest firmware for the router and NIC.

  For more detailed troubleshooting you can refer to this link: troubleshooting common VPN related errors.

  Let us know how it goes.

• Cannot connect remotely ASA5505 on code 8.0.5

  I have 2 ASA5505 firewall deployed, 1 in the data center (code v8.0.3) and 1 at a remote site (code v8.0.2).  Remoteness has 2 PCs that connect to the data center to access services directory, file servers, Exchange, etc.  ASA5505 firewalls are configured for a site to site VPN.

  We had problems of stability with the ASA distance we decided to upgrade the code first.

  We have updated the data center 8.0.5 and everything was fine.  I have given me flows and that I could enter the two ASAs since the data center via ASDM and ssh.

  Then I updated the remote location 8.0.5.  Now, I can't ASDM or ssh to ASA unless I am at that location.  PC are always able to connect to their servers.

  I can't do a ping, telnet, ssh or ASDM inside vlan ip address while I'm at the other site.  I see in the newspapers of being built on the distant firewall incoming connections, but it is not creating a new outbound connection to the movement of the answer.

  8.0.5 did something to block connections to management from outside?

  It is an odd, thanks for sharing the solution!

• Cannot connect remotely TestStand engine-17851

  Have had some strange behaviour tries to run the remote call in sequence. It works on certain combinations of PC, others do not! Ex.: A to B (and vice versa) works, C to D also works well, but has to C or C to A or B to D comes with the mistake-17851. As each station works at least with one partner, I expect that all the DCOM settings and configuration of remote engine are ok. This PC is on the same network, the same group, same configuration I see. TestStand version is 3.5 on all machines. Same Windows-TS-User and on all stations.

  Any idea or experience?

  SOLUTION FOUND:

  There must be a user who has logged on to the remote computer administrator privileges (as mentioned in the reference manual) and - very important - there must be a password set for these users.

  If a user without defined password logs on, Windows blocks all access remotely.

  Thanks for your support!

• now I connect to bt openzone, but internet cannot connect to the DNS PRIMARY server

  I use bt openzone when far but now it connects ok but internet programs cant open and said diagnosis primary dns server cannot answer. I don't know why this has happened. Would it be when I installed AVG free in lieu of Norton

  I completed my registration with avast in license number. How I did it I don't know I could not find the screen with the orange ball, but a glance at the registration page and am a year.

  I then left my hub bt (router) and tried to get with bt openzone and to my surprise, it works. I tried twice and each time bt openzone put me in the btfon and and I opened MSN.

  I think we can say the job done.

  Thank you for your interest and your help.

  jim35e4

• I can't start a desktop connection remote with my file server, but I can't get to my domain controller. Other computers on the network can initiate together.

  Using server 2003 as DC and server 2003 as a FS. Problem computer running windows 7 upgraded to vista professional. I can open a desktop session with the domain controller remotely, but I can't launch with the fs. Other computers on the domain have no problem with a server opening. I have access to shared folders on the MSDS via LAN and can ping the fs. Also can not use MySQL on the fs with this computer. FS cannot launch the Office with the computer problem remotely but can with others.

  Hi Gary,.

  Thanks for posting in the Microsoft Community.

  The question you posted would be better suited in the TechNet Forums; We recommend that you post your question in the TechNet Forums to get help:

  http://social.technet.Microsoft.com/forums/en-us/smallbusinessserver/threads

  If you need Windows guru, do not hesitate to post your questions and we will be happy to help you.

• CAD cannot connect with INFORMATICA_DW_SERVER when dac server is running

  Hi all
  
  We have something strange.
  We have installed just BIA 7.9.5.1 with informatica 8.1.1 sp5 on windows server 2003.
  And confiugered it according to the manual.
  
  Now, we want to set up the connection between the dac and informatica services, but we cannot make a connection when the DAC server is running. When we press on test connection it says "Please wait... "but it's for almost an hour now."
  Now when you stop the dac connect to informatica_dw_server Server works fine.
  The connection with the informatica_rep_server also, also works at the dac server starts.
  
  What have we done so far:
  -We can run pmcmd and pmrep from the command line
  -We have added the/server/bin and/client/bin directory to the path
  -We have added the infa_domains_file system variable
  -We checked the file server dac config.bat
  -We checked port in the adminconsole (i.e. 4001)
  -We rebooted everything (all services and windows server as well)
  -When we try netstat, we see that it is listening on port 4001
  State of proto local address foreign address
  TCP rst - act3ct2:4001 rst - act3ct2:0 LISTENING-> is this correct?
  
  I hope someone can help out me!
  
  Best regards
  
  Remc0 & Erik

  Here is the solution:
  Informatica Session completing successfully, but always in working order

  You must copy the files from the EBF in the informatica directory and it works again!

• Cannot connect to share on another server with a short name only

  • We are having a problem with a SCCM server on windows 2008 R2 enterpeise and trying to connect to another Server 2003 \\aush-pen-xxx01\c$ and gets the error message the specified network name is no longer available. I can do a nslookup and ping the server very well. can map using the ip address and the fully qualified name fine. Can get to other thin servers. and also connect to other servers to the server aush-feather end. This works if the server, then it stops again. No errors in the event log. Tried to get other disks on the server and the same issue. I created another share with permisions for all and always the same question.

    Any ideas?

    • This is the C$ which is the part of the administrator and I can access other servers. I created a test share and get the same question even if share and security permissions are at the world. When I restart the SCCM server, it's good for a while, then I get the error again. I need for SCCM to access this share. Maybe some kind of smb or implementing caching perhaps?

  Hello mrdamo,

  Your question of Windows Server is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public.

  Please ask your question in the Technet Windows Server General category.
  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

  Thank you

  Marilyn

• Cannot connect esx host or vcenter server via powercli (cannot run the cmdlet Connect-VIServer)

  Dear team,

  Once I opened powercli windows, I m unablwe to connect the ESX host or vcenter server, it gives me the following error... Help, please

  

  concerning

  Mr. VMware

  Hello, MrVmware9423-

  It seems that this may have to do with the .NET Framework is installed on the computer on which you run PowerShell/PowerCLI.  Take a look at http://communities.vmware.com/message/2174319 - users have been able to solve the problem with a newer version of the .NET Framework (v2, installed v3.5 - success).

  Because your problem seem (you use a? 2 version of .NET, and you're able to install a newer version)?

• Cannot use remote desktop in Win Server 2008 r2 server

  I installed a Win Server 2008 r2 server and I am unable to use RD to access, firewall is turned off, RD config is configured to accept all versions what to do?

  Hello

  You will need to create a new post on the TechNet site for the server support, please see the following links:

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• Cannot connect to the easy VPN server

  Hi *.

  I have a stupid problem with my easy VPN server. I took the following configuration to configure the VPN: click on

  Successfully, I can ping 192.168.99.1 but when I start AnyConnect (enter this IP address as serveraddress) on my IPhone, it first says that the server certificate is not valid (I ignore because it is self-signed..) and when I press continue it says that no link could be established.

  What can be the problem?

  It is very likely that you have a configured PAT-pool and simply use the Word key "overload" when from your external interface. In this command, you reference an ACL (or an ACL in a road map) where we need to ensure that your VPN-pool in included in the traffic using a NAT.

  --
  Don't stop once you have upgraded your network! Improve the world by lending money to low-income workers:
  http://www.Kiva.org/invitedBy/karsteni

• Unable to connect remotely on windows 2008 R2 since my windows 8

  Cannot connect remotely on windows 2008 R2 since my wi

  Hey oceanpal

  Check out these links

  http://support.Microsoft.com/kb/2781106/en-us

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w8itpro