Establishment of a network of the laptop on pc

Similar Questions

• Problems connecting Xbox 360 to computer vista laptop via ethernet connection to the network local (the laptop is connected via wifi)

  I spent a few hours trying to solve this problem, and I've been to countless forums.  They all told me to go into "Manage network connections" and right-click-properties on my connection Wi - fi.  Then they speak by clicking on the tab sharing... which I did not.  I don't know how to share my connection to the WiFi with my xbox 360.  It is supposed to be easy, but I can't realize what is designed as "highly probable."  I have a laptop Sony Vaio VGN-FW390 and Vista Home Premium. Maybe I have to set up a connection to an access point, or do a sort of thing ICS... I do not know.  I am incredibly annoyed by this, and I'd appreciate any help.  Thank you.

  Messier,
  Thank you for visiting the Microsoft Answers community forum.

  Try this and see if it works for you, it has worked for some users.
  With no cable connected between the computer and the xbox, go to control panel, network and sharing Center. You should see a "Local Area Connection", which will show disabled at this stage, and your "wireless network connection", which should show connected. Connect the ethernet cable to your laptop and the back of the xbox. Select the 'connection to the Local network. After that it is well connected, disable your 'Wireless Network Connection'. Once disabled, right click and click Properties. Go to the Advanced tab and check "allow other users of the network to connect through this computer's internet connection". Once this is done, your wireless internet connection should say shared next to the State of the connection.
  Turn on your wireless connection. Then, right click to 'connect to the Local network' and click on repair. Allow the end. test the connection on your xbox.

  Let us know how that works for you.
  Thank you
  Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• doc files locked by another user. Occurs when the laptop computer on the new Word documents opening.

  Just acquired a computer laptop and everything seemed to sync with SkyDrive and my desktop PC, except that the Word doc files will not open. Error message _ .doc is locked by another user. By selecting 'Open read-only' displays a different error message.

  All other types of files and doc files produced local seem to work well. I can access and open files on SkyDrive.com with both computers. docx files do not seem to be affected.

  The problem occurs only on my laptop. To access the files established by clicking on it in the local SkyDrive open Word (2010) with the error message (the file is locked by another user).

  Files open very well during the passage of SkyDrive.com (from mobile) and in all desktop scenarios. And can access the files on the desktop to the laptop via the network. The two computers configured in the same way of C:, D: (SkyDrive on this partition) and E:

  I can copy files over the network to the laptop E: partition and they access very well. Copy them to D:\SkyDrive (once the original has been removed and SkyDrive left) same problem occurs. Network's WiFi in the House.

  Does not occur with the new files created on laptop, the files in the root directory of the laptop (only subdir) skydrive and .docx files.

  I have updated the advanced settings of sharing and security on the two computers without success.

  All other types of files seem fine.

  Help appreciated.

  Stephen

  Greetings from the happy camper,

  Long process, simple solution. Thanks to Madeni K N for suggestions that lead to the solution.

  The drive letter has changed

  The temporary internet folder to E: and changed environment variables

  Moved temporary internet files to E:

  Without success

  The drive letter has changed back to D:

  Deleted from the temporary internet folder.

  Success!

  Checked E: temp internet files and notice a file called Content.Word

  Empty file 0 bytes

  Copied to the temporary internet folder in D: less Content.Word file

  Reset environment variables and temp internet folder to D:

  No problem! Yes team!

  Comments and suggestions appreciated.

  Thank you all

  Stephen

• Windows 7 Mobility Center cannot turn wireless on. This typing of same good wireless network on another laptop.

  I see is no longer the wireless network off the laptop.
  Wireless network is good because I use another laptop with good signal just next door.
  Looking at the display of windows Mobility Center, I can see the wireless network window that says wireless off but the turn wireless on button is grayed out so I can't click on it. I suspect the driver needs to be recharged, but don't know where to find. Any help?

  Thanks for your reply. I couldn't find a physical switch anywhere so I uninstalled/reinstalled the driver RF by the troubleshooting Web site emachines. Everything is good...

• I try to print the laptop wireless to network shared printer

  Can I connect a wireless laptop that runs Windows XP on a home network with the ISP running on Windows Vista computer?

  Hello

  You can check the links that has steps on how to connect to the computer on the network below.

  Establishment of a network domestic: http://windows.microsoft.com/en-US/windows-vista/Setting-up-a-home-network

  Networking computers running different versions of Windows: http://windows.microsoft.com/en-US/windows-vista/Networking-home-computers-running-different-versions-of-Windows#section_5

  Add a device or computer to a network: http://windows.microsoft.com/en-US/windows-vista/Add-a-device-or-computer-to-a-network

• HP 15-AC044TU: how to enable the wifi/connection wireless network in my laptop HP 15-AC044TU win-7 64-bit

  I can't activate the network wifi/wireless connection on my laptop HP 15 - AC044TU win-7 64-bit. I found no adapters wireless network / wifi drivers on the hp site. where can I find it? the key that is used to toggle the wifi?

  Please solve my problem FSA.

  Thank you.

  Hello:

  You need these drivers for W7 wireless and bluetooth for your model...

  Network controller (wireless card):

  FTP://FTP.HP.com/pub/SoftPaq/sp71501-72000/sp71528 .exe

  Bluetooth:

  This package contains the Broadcom bluetooth driver and software for the laptop models running a supported operating system. Broadcom Bluetooth 4.0 driver is required to activate the bluetooth 4.0 Broadcom devices and is compatible with Broadcom bluetooth 3.0 and earlier versions.

  File name: sp71440.exe

• Network controller on the laptop missing after trying to update some drivers.

  Hello.

  I tried to update some drivers on my laptop and now the network controller is missing on the laptop and I don't have Wi - Fi on it, connect network cable to be able to access the internet. try to get windows to locate it online but can't find it. any where I can get the driver would be great help thank you.

  I have a HP dv6-1130TX

  Rushbiee

  Have you tried the drivers on your Support page?

  http://h10025.www1.HP.com/ewfrf/wc/product?product=3938855&cc=us&DLC=en&lang=en&LC=en&query=DV6-1130TX&tool=

• Dell Inspiron 2650-system of operating Windows XP. I am unable to connect to the internet. Status: Network cable unplugged. Where did this cable located on the laptop?

  I have a Dell Inspiron 2650-system of operating Windows XP.  I am unable to connect to the internet.  Status: Network cable unplugged.  Where did this cable located on the laptop?

  I have a Dell Inspiron 2650-system of operating Windows XP.  I am unable to connect to the internet.  Status: Network cable unplugged.  Where did this cable located on the laptop?

  The network port is the port on the laptop (it is not that large - look around) that looks like a large phone connection.

  You have a router/network to connect to and a cable network to connect with?

  Look at the 'Network option' part of the poster:
  http://support.Dell.com/support/eDOCS/systems/ins2600/placemat1.PDF

• I use a third party inf file when creating a network connection via my USB port. The USB connection will become inadmissible and also cause the laptop hang up.

  I use a third party inf file when creating a network connection via my USB port. The USB connection will become inadmissible and also cause the laptop hang up. Currently I try to modify the INF file but is seeking a help or suggestions in T/S to this problem. Thank you.

  original title: third party INF problems

  Hi Paul,.

  ·         Why are you using a USB port to create a network connection instead of using an Ethernet connection?

  You can see the following article on how to set up a network.

  How to set up a small network with Windows XP Home Edition (PART 1)

• On my dell Inspiron 6200, the hard disk had to be annihilated and XP Pro has been reloaded. Now the laptop is not wireless networks. How can I fix it?

  When wiped the hard drive and windows XP Pro THAT was recharged the cell seems no longer to see wireless networks. I have a netgear router and 2 other laptops accessing it. It acts as the laptop has the switch WiFi off, but it is not a. I need help!

  Hi WilliamBowman,
   
  -What version of service pack of Windows XP you are using?
   
  Method 1: Install the latest driver available for the wireless network adapter and check if it helps fix the problem.
   
  For more information on the update driver, see:

  How to manage devices in Windows XP

  Method 2: Follow the steps listed in the article given below to resolve this issue:

  How to troubleshoot wireless network connections in Windows XP Service Pack 2

  Note: The steps that are listed in the article are applicable to the other service pack versions of Windows XP as well.

• How to disable the laptop network WiFi & allow cable TV

  I have my desktop computer connected using cable for my internet & I have a laptop that I was using WiFi for my internet, how do I change my laptop wi fi to cable so I can go online on my laptop, as well as on my desktop, thanks

  Hello

  You do not have to manually disable you the WiFi, all you have to do is to run an ethernet cable from your router/access point and connect to your ethernet port on the laptop.

  As soon as an ethernet cable is plugged into a computer/laptop, Wifi is disabled automatically, it's the industry standard ethernet tends to provide more transmision of data reliable and stronger than wireless signals.

  However if you use a Modem and not a gateway/router then you can buy a new router, or ask your ISP to upgrade your Moderm to a gateway.

  If you want to keep it cost effective and minimal cost, you could also try doing an Internet connection sharing, providing that your computer has an additional network card, or you could buy a new network adapter and snap it to your computer because the laptop is internet sharing off of your computer in this configuration, you may experience a slow connection.

• How to add the printer in Photosmart 7525 wireless network to my laptop?

  I have already added my new printer Photosmart 7525 to my home network.  It is installed via USB with the complete HP 7525 software (downloaded from HP) on my HP desktop computer that is running Windows 7 Home Premium 64 bit and I shared the printer on the desktop.  I want to access the printer even my laptop which is connected to my network via a router wireless (N).  The laptop is running Windows 7 Home premium 32 bit.  On the laptop under Windows, when I click to "add a network printer", it "sees" the printer 7525 shared desktop, and she also 'sees' 2 iterations of the 7525 which are connected to the network (I used the control panel of the printer to add the 7525 to wireless connection before never hang on the printer to any PC).    Under Windows, when I click on 'Add' my printer to the laptop, it pops up a window asking me to choose my printer model in the list of printers HP listed in the menu drop-down (it is looking to add the printer driver, I think).  My Photosmart 7525 is not in the list.  Photosmart 7500 series of printers is not also listed - even when I refresh the list of printers Windows drop-down list by using the Windows Update option.  So, what should I do - download and install the Photosmart full 7525 software and then add the 7525?

  Hi cwr64,

  It is easier, more likely to work, to install the software of feature complete on each computer you want to use this printer.  I think you can use the printer with the USB cable connected to a printer and the Wi - Fi connection for other systems on your network home.

  The exception: CE devices don't use FFS - instead, you can use the mobile application for printing.

  Examples:

  How to print with an iPad, iPhone or iPod touch

  Printing from an iPad

  Click on the star of congratulations !

  It's a nice way of saying 'Thank you' for help.

  Although I strive to reflect best practices of HP, I do not work for HP.

  Reference:

  E-all-in-one printer drivers HP Photosmart 7525

  Click on the star of congratulations !

  It's a nice way of saying 'Thank you' for help.

  Although I strive to reflect best practices of HP, I do not work for HP.

• Magic of the network hit all the computers off line when the laptop wireless on signs

  I have Network Magic V. 5.1.9055.0, a G from Linksys WRT110 wireless router. Online at any time may be all or part of the next list computers/gamers, computer hand Win XP sp3 is connected to the router, Samsung clp300 printer lazer connected to the main computer as a server, Vista sp2 office connected to the Wii, PS3 wireless wireless router and laptop Vista sp2 wireless. Whenever the laptop wireless comes online, it will stop magic network until the wireless is fully initialized and online, it strikes all onlines offline until there is a full boot of the wireless.

  Very frustrating since we went all the cisco and spilled a belkin router that worked perfectly with the above configuration. (unfortunately I gave the belkin far and no longer have access to it or I would have released this new linksys and would be happy to once again) I don't understand why cisco units cannot work together in harmony?  In any case, I can't find any info on the help of linksys or the magical sites network which brings me to this forum. Need help, please notify...

  I removed NM v5.1.9055 three computers and re-installed to v 5.5.9118. inserted my key and re started to each of them. When the laptop wireless started it off the other two for about 3 minutes until the phone was fully charged while we were back on the line. The poster always online in the map view, the internet router is and the laptop (Vista) shows online, but the report to other computers (1 XP and 1 Vista) shows red and offline. Always frustrating because it's all working without error until I installed the linksys cisco router then the trouble started... still need help...

• Network printer stops working after restarting the laptop

  I have 2 PCs both running windows Vista. A PC is a desktop computer ACER with a printer connected to a USB Port (HP Photosmart C4480). The 2nd PC is an ACER laptop also on windows Vista. I have a network home and print away from the laptop. Problem is when I restart the laptop I can't print remotely and do are Add' the printer again. Print spooling is nec automatic and active. I have downloaded the latest drivers HP for the printer. Just a note to say that ACER laptop my son who works in XP does not have this problem and can print after a reboot.

  Hi GaryPolaris and thanks for the answer.

  What is the brand and model of your printer? Have you checked to see if the printer is compatible with Vista? You can check this in the Vista Compatibility Center located at this URL http://www.microsoft.com/windows/compatibility/ . Also, you can try installing the Vista drivers on the XP machine. If the manufacturer has released Vista drivers simply download and install the drivers on your XP machine.

  I hope this helps. Please post back and let us know if it did or did not solve your problem.

  Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Computer laptop XP does not appear in the network of Vista laptop

  My cell phone based on Windows-XP does not appear in my laptop Windows Vista-base and is not accessible from this Vista computer, but it appears in the network adapter connected to the network wireless by a double dashed line. At the same time, the laptop Vista appears in computers on the XP network and is accessible from there. I have already applied Windows XP - SP3 hotfix KB 922120 to XP laptop and checked the firewall on both machines (Exceptions) settings, and they seemed OK. Also, I checked the HKML restrictanonymous DWORD value data value data (0) of the XP machine.

  Can someone help me with this? Thank you so much in advance.

  Hello
  Maybe this can help.

  To get best results connect to each computer system screen and set all the computers to be on a bearing the same name of Working Group , while each computer has its ownunique name.

  http://www.ezlan.NET/Win7/net_name.jpg

  Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq.html#trusted
  Please Note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic.

  If you end up with the 3rd party software uninstalled or disabled, make sure that Windows native firewall is active .

  Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

  Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040

  In Win XP Pro with simple sharing Off, you can visually see the Permission/security level and set them up at your convenience.

  http://www.Microsoft.com/windowsxp/using/security/learnmore/AccessControl.mspx#securityTab

  Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

  Setting Windows native firewall for sharing XP - http://support.microsoft.com/kb/875357
  Windows XP Patch for sharing with Vista (no need for XP - SP3) - http://support.microsoft.com/kb/922120

  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

  -------------

  If you have permission and security issues with Vista/Win7, check the following settings.

  Point to a folder that wants to share do right click and choose Properties.

  In the properties

  Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.

  This screen shot is to Win 7, Vista menus are similar.

  http://www.ezlan.NET/Win7/permission-security.jpg

  The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.

  When everything is OK, restart the network (router and computer).

  * Note . The groups and users listed in the screen-shoot are just an example. Your list will focus on how your system is configured.

  * Note . All the users who are allowed to share need to have an account onall computers that they are allowed to connect to.

  Everyone is an account, that means a group of all users who already have an account now as users. It is available to avoid the need to configure permission for each on its own, it does not mean all those who feel that they would like to connect.

  -----------

  If more control is needed to take a look at this page http://windows.microsoft.com/en-US/windows-vista/Share-files-and-folders-over-the-network-from-Windows-Vista-Inside-Out

  Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET