ESX server disconnected for 30 seconds & again works well in each interval of 15-20 minutes

Similar Questions

• I plan to upgrade my OS to El Capitan.  What are the processor speed and memory required for the operating system works well?

  I plan to upgrade my OS to El Capitan.  What are the processor speed and memory required for the operating system works well?

  I use a processor 2.3 GHz Intel Core i5 with DDR3 4 GB 1333 MHz memory.

  My last similar attempt on another machine resulted in a very slow computer.

  Thanks, Ron

  Apple says the following:

  General requirements

  • OS X 10.6.8 or later version
  • 2 GB memory
  • 8.8 GB of available storage

  For best performance, I would say not less 4 GB and preferably 8 GB or more.

  Your i5 is well able to support properly.

  http://www.Apple.com/OSX/how-to-upgrade/#Hardware Configuration

• Change the rule VMW ESX Server disconnected

  Hello

  I wonder, is there an option not only get e-mail message with the name of the disconnected ESX, but also to get a list of all the virtual machines on this ESX.

  Best regards

  Victor

  Hello Victor,.

  You can do this:

  Add new rule Variables:

  Type of expression

  def x = scope.get ("virtualMachines")

  def y = x.name;

  return y

  Best regards

  Victor of the future

• SUrface 4 pro for photoshop and lightroom: working well?

  Hi all

  . I am a photographer for pictures allround (Macro, food, Church ecc...) and I used the retina with computer ipad mini 16.4 "sony laptop.

  The problem is just my beginning of notebook to be large for the ride, and I use the Tablet as long as the laptop.

  With Tablet, I use mobile versions of photoshop/lightroom, but I can't work 100% because they have very limited tools (Ad example lightroom can't the lens profiles or distortions difficulty setting).

  Now, I think buying new surface pro 4 (I5 or i7 that I don't know) for work with photoshop and lightroom to 100% with a light machine.

  MY work is:

  Download files camera RAWS, I make them some easy fix (some contrast, histogram, aim profiles) and I will pubblish with whatsapp, facebook, or other.

  I will also show the final shots to my consumers and tablet work, better than a laptop.

  Do you know if the surface PRo4 is right for my job? Is better i7 or i5 version?

  Cc 2014will Photoshop run well on the surface 4 pro, however I do not think that you will be able to use its user interface using the native resolution of 264ppi using CC 2 x 2014 UI becomes like an old IBM 15 "IPS LCD display 4:3 aspect ratio Think 1600 x 1200px 133ppi resolution.  CC2014 2xUI using the pro 4 resolution surface becomes a screen resolution 132ppi have a 3:2 aspect ratio have logically 1368px by 912px less then the old IBM ThinkPad. However, CC 2014 dimensionnera not display the images 2 X.  It will use its normal image resizing and what a view than actual pixels the image will have a resolution of 264ppi for the means in full mode screen area of the image displayed will be 3:2 1824px 2736px.  Photoshop works with a processor.

  You may want to Surface 3 pro screen is slightly smaller, its borders are wider.  However his 216ppi is usable without using 2 x UI for short periods of time.  2 x user interface is more or less equally usable but it 2160 x 1440 px becomes a 1080px by 720px and is not quite meet Photoshop 1024 x 768 UI requirement.

  Photoshop UI is not supposed to be a tactile interface that you'll love more want a Bluetooth mouse and a utility like key if you want to use Photoshop with the surface in the form of tablets.  It is not usable without quick access to shortcuts of Photoshop IMO. On-screen keyboards do not have hack it for shortcuts.

• card network disappeared on each startup but starts working well after each reboot.

  My problem is as Fallows

  1.I start my pc (windows 8) (I close that crashed my pc a few hours ago)
  2.i given cable is now connected to the internet (x red mark).
  3.I check Network and Sharing Center there is no adapter. (convenience store said is a software or hardware problem)
  4 then I rebooted my pc.
  5. now the adapter works fine and net is connected.
  This hole is on every time.
  Help, please.
  Thank you.

  Hello

  Win 8 has a new feature called quick start. It can sometimes cause problems as you mentioned as well as others.

  The best way to know if the problem is to disable and see what happens.

  This feature works only when you make a STOP and then start.

  It is not perform a RESTART.

  Turn on or off...

  Go to the control panel... Power options, and then select choose the power what buttons on the left.

  Then select change settings that are currently unavailable near the top center of the screen...

  Lower on the window, uncheck the quick start.

  This may or may not help your problem, but is easy to check.

  If this solves the problem, you can analyze what is not supported correctly.

  The problem is probably related to drivers for your network adapter, but quick start will worsen the problem if they are not good.

• Every hour at the exact minute, my internet will disconnect me for a second, then reconnect

  As the title explains, I am disconnected for a second and then reconnected immediately.  It's annoying because I have to listen and do a lot of online games.  I don't know if it was a windows update it does, because a few months ago, I used to never have this problem.  I have this problem all the time now.  I'm sure that it is not my ISP, because my brother can never disconnects.  It's just my PC.  We have the exact same map network as well.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/Windows-7-network-disconnects-and-reconnects/704ba416-7e9e-4440-b5cd-9c7294ae6dd6
  I tried to do what he says to do in the link above with no result.  I did the first 2 methods.  I couldn't find the GUID in the method 3.  Help, please!  I don't really know what to do at this point and it's a very boring game experience!

  Not so much how strongly the processor is loaded, but if a process (or sub-process) is associated with the problem. The CPU chart will give you time to refine the search for any stray process that occurs every hour.

  J W Stuart: http://www.pagestart.com

• Adding 2nd NIC killed ESX Server

  All,

  Thank you for taking the time to read my post. Here are the environment and then my question.

  3 - DELL R510 - Dual Core Quad - Intel systems

  The area has "2" Integrated NIC

  as well as "2" QUAD Port - PCI Intel network interface cards

  NIC 0 - integrated NETWORK card is a system where installed- and it is plugged into a standard Switch CISCO GIG, the tag VLAN 108

  NIC 1 - integrated is configured for iSCSI connectivity

  LOCATION 0 - Port Quad PCI NIC

  Port # 3 is connected to a GROUP of CIRCUITS on a CISCO SWITCH with VLAN 108, 104, 107 and 110 on it

  Port # 1 is used for the 2nd iSCSI connection

  LOCATION 1 - Port Quad PCI NIC

  # 7 port is connected to a different GROUP of CIRCUITS on a CISCO SWITCH with VLAN 108, 104, 107 and 110 on it

  All three servers are installed with ESX4 update 1

  When I go into vCenter to one of the three servers and go to the primary Switch virtual networking, if I add #3 NIC or Port #7 NIC to the virtual switch (it currently integrated NIC 0 in) the system disconnects the network and to connect to vCenter losses and the entire network. If physically I reboot the ESX Server, it is NOT on the network. I have the tag VLAN in NIC0 defined 4095 to accept all the VLANS as well. (I tried with and without the tag of VLAN 4095 - same result)

  Here are my questions:

  1 - Why is - what happens? How it should be configured?

  2. is there a way to get NIC0 to return to the network without having to re - install ESX?

  I reinstalled the boxes several times now and tried many variations of combinations of nic, and they all end up with the ESX Server disconnected from the network and does not.

  Really looking for some common sense here... Please and thank you.

  Hmmmm, shooting a little in the dark, but I think your next 2 steps are:

  (1) get the SC (vswif0) MAC and check your MAC address table switch to fly throughout of ports

  (2) on the console, use esxcfg-vswitch for uplink associated with the Group of port SC the first list, and then delete the 2nd network card.  This should get your SC direct return and leave the new map available NETWORK the vswitch, simply not group ports SC.  (And you don't have to reinstall :-).)

  Virtualization of happy!

  JP

  Please consider awarding points for correct or helpful answers

• VMotion and file on an ESX Server host

  Hello

  We have recently implemented 3 ESX 3.5 servers and configured HA and Drs However, I wonder for VMotion to work correctly, each ESX Server dns name and IP address must be in each box of ESX host file? My last company consultant put all the names of the ESX servers with IP addresses in the file for each host, but this time, the consultant does not. I was wondering if it is advisable or not?

  Thank you.

  KeV

  Hello

  You needn't name resolution for Vmotion. This is based on the Vmotion network, that use only Ip and default gateway addresses.

  On the hand of oter HA need DNS to work. Then you should be able to resolve host names in the bu cluster HA FQDN.

  Have a look here for best practices on HA-> http://www.yellow-bricks.com/2008/10/27/ha-best-practices/

  Best regards

  Lars Liljeroth

  -

• C670 D-115 satellite slow, works well in safe mode

  Hello

  After a clean install, it took 2 days to download all files from Windows Update.
  All operations that use internet are slow, searching for files seems to work well.
  Speedtests DS are 10Mbit on WIfi and LAN (100 Mbit connection), U.S. run more rapid 17 on WIFI 90 Mbits on LAN. In SafeMode with networking of all series of correct.

  I know I can try disabling drivers one by one (msconfig) to find the one that is causing this. But I was hoping that someone knows the problem and can save me time, best, Frank.

  * My C670 D-115 Satellite part: PCS4AS-01100rdu, SER. 4C072800R, Win 7 SP1 of the Prem, *

  Have you installed original image recovery or your own version of the OS?
  After clean OS installation Windows Update set to automatic so downloading updates runs in background and it slows down laptop performance quickly, especially if you need internet connection.

  Change windows update settings and set it to check for updates but let me choose whether to download and install them.
  When you have finished your work, you can start update installation.

• Shut down or migrate VM offline (on a disconnected ESX Server)

  We have 4 ESX servers in our infrastructure. After a failure of three of them under tension, but there is not (esx-02).

  On this host, we have virtual machine called f12-dns-02. Now esx - 02 is disconnected, but this always considered virtual machineis as running, why?

  We can't stop it or move to another host (each option is disabled).

  How can turn us this machine to another esx Server?

  

  The virtual machine must be registed for this ESX host running vmware-cmd commands. and if you are in the directory of the virtual machine then you can use #vmware - cmd vm.vmx stop

  #vmware - cmd vm.vmx stophard

  If the second command does not work, try again with a space between the stop and hard

  So without the SSH access, I think that what you use is device of vMA.

  If you have found this or other useful information, please consider awarding points to 'Correct' or 'useful '.

  F10

  VCP3, VCP4, HP UX CSA

  http://KB.VMware.com/

• REGZA 37A3030DB menus come for a few seconds & disappear; works with the DVD

  Saturday afternoon, TV channels stopped working. The TV works fine with DVD or laptop, but not with the channels (i.e. we cannot watch live TV) and the menu buttons appear on the screen for 2 seconds max before disappearing. It already happened but has himself set normally after 24 hours. It's almost 48 hours now, and I'm worried. If anyone can help or make suggestions, it would be great. My feeling is that this happens after an auto-update firmware, so once the TV is working again, I want to find a way to disable these automatic updates. Thank you. R

  Just for you, everyone knows that, after 48 hours, television seems to have reset itself and now works again. R

• Satellite 1110 series only works for 12 seconds and then powers down

  We have several series of 1110 (Z14 and Z20) laptops and one of them fails to start correctly. Everything works perfectly for 12 seconds, and then it turns off. Each time at exactly 12 seconds.

  Does anyone have any suggestions where I should start looking?

  I've already replaced everything stands (up to the CPU), but without result. There seems to be something inside the motherboard BTK20.

  Thank you

  > There seems to be something inside the motherboard BTK20.

  Seems so if you replaced the common areas like RAM, HARD drive and the processor then the last part would be the motherboard

  But what do you think an overheating problem?
  I mean that the laptop could close because of the higher temperature
  I recommend to check this maybe the thermal grease should be renewed, clean the fans and check again

• Whenever I try to open other pages, they'll just be "loading" for 30 seconds then it says that the page cannot load (as if my internet is disconnected)

  Recent internet connection problems

  Recently, my internet has been acting weird. He has never acted like this before, until 2 people moved my basement and began to share Internet (maybe a coincidence, but not sure). Sometimes when I leave my computer on and stay away from the keyboard and go back some time after and open my internet browser, only my home page would be in charge. Whenever I try to open other pages, they will simply be "loading" for 30 seconds then says that the page cannot load (as if my internet is disconnected). But the problem is, when I click on network and sharing Center, there is nothing wrong with that.

  Access - LAN and the Internet

  Connection - connection to the Local network

  It's the same when my Internet works fine, but I can't just browse other Web pages EXCEPT the home page that appears when I first open my browser. When this happens, I usually unplug my modem then reconnect OR just keep trying to load a page when after like 5 minutes or more, everything works normally.

  How can I solve this problem? It is annoying and happens almost everytime I go back to use my computer after staying idle for some time.

  By the way, I noticed that I have 4 'networks '. I'm not sure what they are, but I could merge or delete them. It would help my situation?

  Control Panel-> network and interest-> network and sharing Center Center-> customize-> Merge or Delete network locations.

  I am very annoyed by the present and I would be grateful any entry in this case.

  Thank you in advance.

  Hello

  Follow the steps in this links:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

• Hello - I have used CC for about 1.5 years, I work on my Mac fixed in my office and also on my Mac Powerbook. For the second time, I can't work on the Powerbook - I can´t reach my documents - nothing happens if I have the latest version on both

  Hello - I have used CC for about 1.5 years, I work on my Mac fixed in my office and also on my Mac Powerbook. For the second time, I can't work on the Powerbook - I can´t reach my documents - nothing happens if I have the latest version on both computers. What's not?

  Hello

  Please help us to better understand.

  What message did you while accessing your documents?

  Do you have a white screen on the creative cloud App:

  You can refer -:new Creative Cloud application unusable: it is empty!

  and also try:-screen black at sign - in | Creative Office Cloud app

  Wheel rotation under apps:

  Please check the help below document:

  Does not open App | Wheels of progress turn continuously

  You can also view the nets below where this issue has been addressed:

  Adobe Creative Cloud / Desktop App / Home Screen: constant spinning wheel

  Creative Cloud Desktop App taped blue spinning wheel after update.

  For messages from the server:

  Solutions to connection errors, activation and connection with creative Cloud applications and Creative Suite

  Creative cloud will not - can not get on the servers, perhaps because the firewall blocks

  Hope this helps!

• ESX Server is disconnected - corrupted file system

  at 21:00 VCentre alert: State of the connection host = not response. Tried to re - connect, task hanged, had to stop/start service vcentre

  check the logs / found: error (-5), the newspaper on the device 68:02

  checked dmesg and found many entries as the three below.

  Virtual machines are running, but don't know for how much longer before the death of server. Cannot Vmotion, want to move the virtual machines

  for the second node in the cluster and then try to solve it.

  Will appreciate any suggestions, this doesn't look good.

  THX

  Ext3-fs abortion (device cciss (104.9)): ext3_journal_start: detected aborted journal

  Abandonment of the journal on the cciss device (104.8)

  (device cciss (104,2)): ext3_journal_start: detected aborted journal

  If you have a shared storage, just stop the virtual machines, register and then on the second ESX and just start them.

  Put the first ESX in maintenance (not required, but recommended) mode and make your tests.

  André

  * If you found this device or any other answer useful please consider awarding points for correct or helpful answers