ESX4 host sees 3.5 data stores, but sees no clients in the data store

Similar Questions

• If I put in place an openfiler VM as a data store iSCSI & vmfs on two ESXi hosts, both ESXi hosts can access two data warehouses?

  If I put in place an openfiler VM as a data store iSCSI & vmfs on two ESXi hosts, both ESXi hosts can access two data warehouses?

  The reason why I ask, is that I have two hosts ESXi ESXi 4 running.  I do my backups with ghettoVCB, which I modified to create thin backups on one of the drives the.  I then wput them to the server, which causes them to become thick.  Directly targets the backup in a vmfs iSCSI on the server in the face shop.  It would save a step and the vmdk backup should remain thin.

  Thank you!

  The short answer is Yes. If you allow the ESX servers to see the LUN. This setting is configured to the Openfiler.

• Hosting devices USB with my STOR problem. E TV

  I had my STOR. E TV for about 2 years now, and note this problem since I was.

  Problem: when you host a usb (flash or ext hdd) stor.e tv device detects the device and open the USB key. However when I try to play a file, it starts off the coast of the fine, but about a minute in the picture begins to shift making the file impossible to watch.

  I heard from his colleagues to see if there is updated firmware for the tv stor.e as this may help.

  Please if he would, and where would I go to find it?

  Kind regards
  André

  > I heard by his colleagues to see if there is updated firmware for the stor.e tv because it might help.

  There is no firmware available for television Stor.E
  If you go to
  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp?service=EU
  and choose
  -Options
  -Drive devices
  -Multimedia hard drives
  -3.5 store TV
  you won't find any firmware

  But there is a firmware for Stor.E TV +.
  But I put t think its compatibility with the TV StorE

• vCenter Server 4 as virtual machine by vSphere, ESX4 host

  Hello

  I would like to ask if anyone has tried to do.

  I create a virtual machine to run my vCenter Server 4 under a new brand, vSphere, ESX4, armed with other VM.

  My question is, can I use vCenter Server 4 and the same vSphere, ESX4 host where the vCenter Server 4 is be managed host?  Is this possible.

  I did this, but in the ESX and vcenter 4 installation guide his page 16 of the document makes it clear that: "the vCenter Server system is a physical machine or the virtual machine with access to a database taken in charge. The vCenter Server system must meet specific requirements. Also, make sure that the vSphere Client machines meet the hardware requirements. »

  Here is the link to the document: http://www.vmware.com/pdf/vsphere4/r40/vsp_40_esx_vc_installation_guide.pdf

  But if you plan to do that you have to ensure three points (shown in this link: http://www.vladan.fr/three-main-reasons-to-run-virtual-center-server-as-a-virtual-machine/):

  1. Disable DRS (level of automation of change!) for your VirtualCenter VM and make sure the document where the VirtualCenter Server (my suggestion would be the first area of ESX)

  2. Enable HA for the VirtualCenter server and set the boot at high priority

  3. Make sure the VirtualCenter server gets sufficient resources by defining actions

  There is also another useful post that describes the advantages of the virtual centre running as a virtual machine:

  http://www.vmwareinfo.com/2009/01/VMware-VirtualCenter-as-virtual-machine.html

• where activate script of post-installation on an ESX4 host

  Hello

  You used to be able to modify the struts - config.xml to allow scripted installation configuration to work, but even the script link is not there on the Web page of the hosts. Anyone know if the script file is formed in another location that the .xml file above is there any more.

  Thank you

  Dan

  This feature has been removed from ESX 4, take a look at the release notes: http://www.vmware.com/support/vsphere4/doc/vsp_esx40_vc40_rel_notes.html

  VMware Web Access kickstart script Builder is not supported

  For installation ESX scripted, the generator script VMware Web Access is not available in vSphere 4.0.

  Solution: You can use the startup script that is automatically generated after an interactive installation. After the first interactive installation of ESX, the installer creates a script /root/ks.cfg in the ESX filesystem. This text reflects the choices you made in the interactive installation. For a complete list of the commands supported and a sample script, see the ESX and vCenter Server Installation Guide.

  You can use the 3.5 ESX kickstart, but know there are some obsolete commands, so I recommend to check the documentation. This is an excellent point of departure for cofiguring kickstart for ESX 4 by Mike Laspina: http://blog.laspina.ca/ubiquitous/automating-vsphere-esx4-host-installations

  =========================================================================

  William Lam

  VMware vExpert 2009

  Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/

  repository scripts vGhetto

  VMware Code Central - Scripts/code samples for developers and administrators

  150 VMware developer

  Twitter: @lamw

  If you find this information useful, please give points to "correct" or "useful".

• My computer always tells me to update the Pages, but when I go to the App store, it will not be updated, I just get the spinning wheel.

  My computer tells me every day to update the Pages, but when I go to the App store (where I bought it) and click on update, I just get a spinning wheel.

  The specific version of Mac OS X (Apple logo: about this Mac) and version specific Pages (Pages: pages) will prevent us from guess.

• How to uninstall and reinstall an app that I bought, but is no longer in the store?

  I bought the Publisher Adobe Photoshop elements 12 some time ago.  Now it does not start, it crashes every time.

  In the app store, there are many complaints that it happens also with Photoshop 13, in any case a Board of a user (Adobe and Apple seems not to be able to provide the solution even for version 13) says that a good idea is to uninstall the application and reinstall it again.

  Now the problem is: in my understanding, I can certainly uninstall an App disconnected from the launch pad (I think... I'm new to mac).

  But how can I reinstall, if it is no longer on the store?

  It appears, however, in my "purchased items.

  

  Thank you very much

  for any advice

  Concerning

  Claudio

  Put the application in the trash but not empty. Open the App Store, go to the shopping page where you should be able to re - download. Note that if the application will not work with the iOS version you are currently using, you won't be able to use it longer unless the developer upgrades it.

• I'm from the Argentina and I bought an Iphone in Miami 2 weeks ago. When I arrived to my country, I realized that the iphone did not work. There is no Apple store in the country of mi, but I am going to the Uruguay in the next few days. Can I change it he

  I'm from the Argentina and I bought an Iphone in Miami 2 weeks ago. When I arrived to my country, I realized that the iphone did not work. There is no Apple store in the country of mi, but I am going to the Uruguay in the next few days. Can I change it here?

  # Given that the iPhone was purchased from the United States which is the place you can have anything done using the guarantee. You or your agent must submit to Apple in the United States, because Apple does not accept foreign shipments.

• I download the ios9.2 but I can't download the application on the Apple App Store. Some people say to delete the old App Store, but cannot download the new App Store. Please help me. Thank you.

  I have download the iis 9.2 application, but I can't download the application on Apple App Store.Some people say need removes the old App Store and download the new AppStore.I can not download the new app store. Please help me. Thank you.

  Can't download what app? What happens when you try? The App Store is part of the operating system. You can not download separately.

• I messup and now my system is not compatible, and every thing is blurry. I am trying to use the system restore, but nowhere can I enter the date of 2 days ago

  I spoil yesterday 8/24 today my system is not compatible, and every thing is blurry.

  I am trying to use the system restore, but nowhere can I enter the date of 2 days ago that do I do?

  Post proposed by the facilitator for the appropriate forum placed

  Hi Michael,

  We suggest that you try to start your computer in safe mode to check if the problem persists. You can follow the steps given on Advanced startup options (including safe mode).

  Let us know how it goes.

  Kind regards.

• Disappearing Windows Apps but when I go to the store they always see the installed

  When I arrived at the store of Windows apps I had on my tablet installed show but they do not appear on my screen of applications all or my splash screen.  When I hit install it goes through the motions but does not appear in place of ELISA.  Don't know what happened, but it's quite frustrating

  Thanks for the reply.  This number is different from come just released.  If I go to all the apps apps that were once on my Tablet do not show, and when I search my tablet also does not show.  But when I go to the store they show as installed on my surface.  There is a Setup button I hit and it seems to go through the motions well with no errors but then when I go to all the applications that I tried to download is not found.

  I thought that if I could find them I could delete and then reinstall after but I can't find them anywhere on my surface.

  Well, I came across the answer.  somehow my user profile folder has changed to hidden.  I noticed that he was not and changed the properties and the boom that the missing applications are returned.

• try to download the new 8.1 Windows but when I go to the store - must be an administrator to perform action

  I am connected to my administrator account and trying to download the new Windows 8.1 but when I go to the store to download, which is also signed on my Microsoft account, he pushes me with an error saying that I must be an administrator to complete the operation. I shut down the computer and logged on. Also, I lowered my UAC setting and retried still no luck. I thought about it and tripped by preferences but have had no luck. Any suggestions...?

  Marissa

  Former title : administrator account

  Hi Marissa,

  Thanks for posting your query on the Microsoft Community Forum and I can understand the level of frustration through which you leave.

  I would be grateful if you can provide us with the following information to help us better understand the issue.

  1. All other updates installed on your computer?
  2. (KB2919442) update is installed on your computer?
  3. Are other features of this new update work well like minimizing the window, the button / stop etc.?

  8.1 update Windows (KB2919355) is an important update of Windows include improvements that will facilitate your favorite applications and settings to find and use, and offer more familiar mouse and keyboard options.

  There are a few prerequisites for this update must be installed:

  • Before installing update 8.1 for Windows (KB2919355) Please make sure that KB2919442 is installed.
        
    KB2919442 is the sine qua non of 8.1 to Windows Update.

  For more information, please see the Microsoft Article.
       
  Battery service made available for Windows RT 8.1 8.1 of Windows and Windows Server R2 2012: March 2014.
  http://support.Microsoft.com/kb/2919442/en-us

  • Temporarily disable the security software during the installation of Windows Update 8.1 to avoid conflict situations.

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attack.

  You can check the link below for the updates are installed on your computer.

  Windows Update: frequently asked Questions

  http://Windows.Microsoft.com/en-us/Windows-8/Windows-Update-FAQ

  If it helps, try the methods and see them below.

   

  Method 1:

  I suggest you to run the Windows Update Troubleshooter:

   

  Problems with installing updates

  http://Windows.Microsoft.com/en-in/Windows/troubleshoot-problems-installing-updates#1TC=Windows-8

  Restart the computer once after running the troubleshooter. Check to see if that fixes the problem.

   

  Method 2:

  If the problem persists, I suggest you run clean boot.

  Make your system clean boot State helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.

  How to perform a clean boot in Windows

  http://support.Microsoft.com/kb/929135/en-us

   

  Note: refer to "How to reset the computer to start normally after a boot minimum troubleshooting" to prepare the computer to start as usual after a repair.

   

  Additional information:

  For more information on this update, you can refer to the Microsoft article.

  Install the latest update of Windows 8.1

  http://Windows.Microsoft.com/en-us/Windows-8/install-latest-update-Windows-8-1

   

  Hope it would help. If the problem still persists, post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Thank you.

• I'm trying to restore my computer to a specific date, but I can't find the option that will allow me to go there.

  Hello

  I'm trying to restore my computer to a specific date, but I can't find the option that will allow me to go there. Help, please! Its really URGENT.

  Original title: urgent

  See option #1 on this page: http://cmdrkeene.com/quickly-repair-pc-problems

• All the members (but 1) are removed from the entity dimension in planning and deployed to essbase. -What are the data deleted in essbase so? / The data can be restored by restoring the entity dimension?

  All the members (but 1) are removed from the entity dimension in planning and deployed to essbase.

  -What are the data deleted in essbase so?

  The data can be restored by restoring the entity dimension? EPMA the entity dimension is still in tact.

  It is unclear what exectly arrived, but looks like a change was made in the dimension entity planning (not EPMA) and then deployed (successfully).

  In essbase, we see that the entity dimension has only one member left for the appropriate plan types, as in the planning.

  If you remove members and then push that yes the essbase data is deleted, if you need back then you will need to go back to your restore process.

  See you soon

  John

  http://John-Goodwin.blogspot.com/

• FDMEE of planning data loaded successfully but not able to see the data in Planning - export of fish shows in FDMEE

  Hi all

  We loaded FDMEE data to planning, data has been loaded successfully, but not able to see the data in the Planning Application.

  In the processes log, I can see her mentioned data loaded in the Cube. Please advise on this.

  Thank you

  Roshi

  Two things:

  -I wasn't talking about method you import data but export data. You use the SQL method. Go to target Applications, select your application of planning/essbase, and set load method as a file. Memorize your settings

  2014-06-19 12:26:50, 692 [AIF] INFO: rules properly locked the file AIF0028

  2014-06-19 12:26:50, 692 INFO [AIF]: load data into the cube by launching the rules file...

  2014-06-19 12:26:50, 692 INFO [AIF]: loading data into the cube using sql...

  2014-06-19 12:26:50, 801 [AIF] INFO: the data has been loaded by the rules file.

  2014-06-19 12:26:50, 801 [AIF] INFO: Unlocking AIF0028 rules file

  2014-06-19 12:26:50, 801 [AIF] INFO: successfully unlocked rules AIF0028 file

  -Then export again and review. DAT file in the Outbox folder. Is it empty?

  -You need to add a new dimension to your import format (Dimension add > currency). Then add Local as expression

  -Import, validate and export data