esxcli swiscsi nic add "Failed to add nic", Ko 1009450 does not apply
entry Ko 1009450 covering "Add failed in IMA" does NOT apply to my situation, as I have only 1 uplink in each portgroup. I'm under esx 4.1 build 260247 (custom dell A00) on a Dell 2950 with ethernet 4 ports (+ drac) I can't link the software iscsi adapter vmhba38 to my switch.
That's what I tried the CLI, starting with any network management port and vm on vswitch0 (linked to 1 network card)
~ # esxcfg - swiscsi - q
ISCSI Software is enabled
~ # esxcfg - NICS - l
Name PCI Driver link speed Duplex MAC address MTU Description
vmnic0 0000:05:00.00 bnx2 up to 1000Mbps Full 00:1e:c9:db:39:10 1500 Broadcom Broadcom NetXtreme II BCM5708 1000Base-T Corporation
vmnic1 0000:09:00.00 bnx2 up to 1000Mbps Full 00:1e:c9:db:39:12 1500 Broadcom Broadcom NetXtreme II BCM5708 1000Base-T Corporation
vmnic2 e1000e up to 1000Mbps Full 00:15:17:95:4 c 0000:0e:00.00: 1 to 9000 Corporation Intel 82571EB Gigabit Ethernet Controller
vmnic3 0000:0e:00.01 e1000e up to 1000Mbps Full 00:15:17:95:4 c: 1 b 9000 Corporation Intel 82571EB Gigabit Ethernet Controller
~ # esxcfg - vswitch - a vSwitch1
~ # esxcfg - vswitch - a vSwitch2
~ # esxcfg - vswitch vSwitch1 vmnic2-L
~ # esxcfg - vswitch vSwitch2-L vmnic3
~ # esxcfg - vswitch vSwitch1 m - 9000
~ # esxcfg - vswitch vSwitch2 m - 9000
~ # esxcfg - vswitch vSwitch1-a iscsi-a
~ # esxcfg - vswitch vSwitch2 - iscsi-b
~ # esxcfg - vmknic - a-i 172.16.128.3 255.255.255.0 n-m 9000 iscsi - has
~ # esxcfg - vmknic - a-i 172.16.129.3 - n 255.255.255.0 m 9000 iscsi-b
~ # esxcfg - vmknic - l
Interface Port Group/DVPort IP IP family address Netmask Broadcast MAC address MTU TSO MSS active Type
management 192.168.1.19 IPv4 network vmk0 255.255.255.0 192.168.1.255 true 1500 65535 STATIC 00:1e:c9:db:39:10
vmk1 iscsi-a IPv4 172.16.128.3 255.255.255.0 172.16.128.255 00:50:56:78:b4:54 9000 65535 true STATIC
IPv4 iscsi-b vmk2 172.16.129.3 255.255.255.0 172.16.129.255 00:50:56:7f:a4:4f 9000 65535 true STATIC
~ # esxcfg - vswitch - l
Switch name Num used Ports configured Ports MTU rising ports
128 3 128 1500 vmnic0 vSwitch0
Name PortGroup VLAN ID used rising Ports
The VM network 0 0 vmnic0
0 1 vmnic0 network management
Switch name Num used Ports configured Ports MTU rising ports
128 3 128 9000 vmnic2 vSwitch1
Name PortGroup VLAN ID used rising Ports
0 1 vmnic2 iSCSI-a
Switch name Num used Ports configured Ports MTU rising ports
128 3 128 9000 vmnic3 vSwitch2
Name PortGroup VLAN ID used rising Ports
iSCSI-b 0 1 vmnic3
~ # esxcli swiscsi nic add - n vmk1 d vmhba38
Errors:
Failed to add the nic.
Can anyone suggest a work around? Watch it has nothing useful.
Thank you
Hello
Could you please run:
esxcli swiscsi nic list vmhba38 d
And show us the result? I'm interested to know if something is already linked there?
Tags: VMware
Similar Questions
-
[(Windows XP) looking for a cure to issue:]
["Add Remove Programs tool does not open, cannot access area Add Remove programs on the control panel."](After typing regsvr32 mshtml.dll then press Enter :)met the following error message:"mshtml.dll was loaded, but DllRegisterServer entry point was not found.This file cannot be saved. »How can I fix above error message?-Alan.Hi Alan,
· Did you do changes on the computer before the show?
· Are you referring to an article in Microsoft?
Follow these methods.
Method 1: Follow the following steps:
(a) click on Start, run, type cmd and press enter.
(b) in the command prompt, run these commands:
regsvr32 Jscript.dll
regsvr32 Msi.dll
regsvr32 Oledb32.dll.
regsvr32 Msado15.dll.
regsvr32 Mshtmled.dll
Method 2: Scan the file system (CFS) auditor to repair corrupted files.
Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)
http://support.Microsoft.com/kb/310747
Method 3: Performs a search using the Microsoft safety scanner.
http://www.Microsoft.com/security/scanner/en-us/default.aspx
Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.
-
I use upstream, that allowed color spaces are CMYK. When I place a RGB file, preflight reports an error (very good). But when I add the Fx (effect) does not forward flight "Bevel and Emboss", report an error, which is really annoying. How can I fix? I like to have 'The transparency blend space' on "Document CMYK" and in the preflight profile "Fusion of transparent space" required: "CMYK".
Interestingly, if I copy and paste your images into a new doc 2 points scored.
I think that the solution is to assign the CMYK printer profile in the document. In this case, you no longer control upstream for RGB color, because by default it is converted to CMYK space correct on export or print output.
-
ORA-12545: Connect failed because target host or object does not exist
Hi all
I am not able to connect database remotely. I have two servers with the name U.S. and localhost. Here are my coordinates tns:
Details of the host server we:
[oracle@US admin] $ more tnsnames.ora
tnsnames.ora # Network Configuration file: /u01/app/oracle/product/11.2.0/db_1/network/admin/tnsnames.ora
# Generated by Oracle configuration tools.
PROD =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP) (HOST = EN)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = prod. WORLD)
)
)
PROD_STBY =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost) (PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = prod. WORLD)
)
)
[oracle@US admin] $ more sysconfig
Networking = yes
NETWORKING_IPV6 = yes
HOSTNAME = US.localdomain
[oracle@US admin] $ more/etc/hosts
# Do not remove the next line, or various programs
# requiring a network functionality will fail.
127.0.0.1 localhost.localdomain localhost
: US.localdomain6 1 U.S.
Remote Ping US server location:
[oracle@US admin] $ ping 192.168.188.131
PING 192.168.188.131 (192.168.188.131) 56 (84) bytes of data.
64 bytes from 192.168.188.131: icmp_seq = 1 ttl = 64 time = 0,662 ms
64 bytes from 192.168.188.131: icmp_seq = 2 ttl = 64 time = 0,558 ms
64 bytes from 192.168.188.131: icmp_seq = 3 ttl = 64 time = 0,566 ms
64 bytes from 192.168.188.131: icmp_seq = 4 ttl = 64 time = 0,603 ms
64 bytes from 192.168.188.131: icmp_seq = 5 ttl = 64 time = 0.575 ms
^ C
-192.168.188.131 - ping statistics
5 packets transmitted, 5 received, 0% packet loss, time 4002ms
RTT min/avg/max/leg = 0.558/0.592/0.662/0.048 ms
Details of the server remote localhost:
[oracle@localhost admin] $ more tnsnames.ora
PROD =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP) (HOST = EN)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = prod. WORLD)
)
)
PROD_STBY =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost) (PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = prod. WORLD)
)
)
[oracle@localhost admin] $ cat/etc/hosts
# Do not remove the next line, or various programs
# requiring a network functionality will fail.
127.0.0.1 localhost.localdomain localhost
: 1 localhost6.localdomain6 localhost6
[oracle@localhost admin] $ cat sysconfig
Networking = yes
NETWORKING_IPV6 = yes
HOSTNAME = localhost.localdomain
[oracle@localhost admin] $ listener.ora more
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = prod. WORLD)
(ORACLE_HOME = u01/app/oracle/product/11.2.0/dbhome_1)
(SID_NAME = prod)
)
)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost.localdomain) (PORT = 1521))
)
(DESCRIPTION =
(ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1521))
)
)
ADR_BASE_LISTENER = / u01/app/oracle
[oracle@localhost admin] $ lsnrctl status
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 4 February 2014 16:49:36
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST=localhost.localdomain) (PORT = 1521)))
STATUS of the LISTENER
------------------------
Alias LISTENER
Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Start date February 4, 2014 16:42:09
Uptime 0 days 0 h 7 min 26 sec
Draw level off
Security ON: OS Local Authentication
SNMP OFF
Parameter Listener of the /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora file
The listener log file /U01/app/Oracle/diag/tnslsnr/localhost/listener/alert/log.XML
Summary of endpoints listening...
(DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=localhost.localdomain) (PORT = 1521)))
(DESCRIPTION = (ADDRESS = (PROTOCOL = ipc) (KEY = EXTPROC1521)))
Summary of services...
Service "prod. The WORLD' has 1 instance (s).
Instance "prod", status UNKNOWN, has 1 operation for this service...
The command completed successfully
Location of ping to the server hosting remote localhost:
[oracle@localhost admin] $ ping 192.168.188.130
PING 192.168.188.130 (192.168.188.130) 56 (84) bytes of data.
64 bytes from 192.168.188.130: icmp_seq = 1 ttl = 64 time = 1.57 ms
64 bytes from 192.168.188.130: icmp_seq = 2 ttl = 64 time = 0,223 ms
64 bytes from 192.168.188.130: icmp_seq = 3 ttl = 64 time = 0,577 ms
64 bytes from 192.168.188.130: icmp_seq = 4 ttl = 64 time = 0,571 ms
64 bytes from 192.168.188.130: icmp_seq = 5 ttl = 64 time = 0,568 ms
^ C
-192.168.188.130 - ping statistics
5 packets transmitted, 5 received, 0% packet loss, time 4006ms
RTT min/avg/max/leg = 0.223/0.703/1.578/0.458 ms
Connection database target mode ensures via RMAN:
[oracle@localhost admin] $ rman target sys/oracle_4U@PROD auxiliary sys/oracle_4U@PROD_STBY
Recovery Manager: release 11.2.0.1.0 - Production on Tue Feb 4 16:56:45 2014
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
RMAN-00571: ===========================================================
RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
RMAN-00571: ===========================================================
RMAN-00554: initialization of the package manager internal collection failed
RMAN-04005: target database error:
ORA-12545: Connect failed because target host or object does not exist
Please let me know the cause of this error and it please help me how can I solve it.
Kind regards
Michel
OK, so you have a software firewall (IPTables) running. By default, it will not be configured to accept connections on port 1521. You have two options...
(1) disable the firewall completely. Run these commands to do this...
stop /etc/init.d/iptables
chkconfig iptables off
The first command stops the service. The second command prevents revived at every restart of the OS.
(2) add an exception to the firewall for port 1521. I'm not a Linux expert, but it should be something like this...
Change the configuration of IPTables with vi...
VI/etc/sysconfig/iptables
Add a new rule as follows...
-A of ENTRY m state - state NEW-m tcp tcp - dport 1521-j ACCEPT Pei
Save and close, and then restart the IPTables service...
/etc/init.d/iptables restart
NOTE: you must always change the name of this server to something other than "localhost".
-
On Vista x 64 German language pack fails with code 2 - proposed patch does not install
Hello!
I tried to install on Vista Ultimate x 64 German language pack, but it failed with error code 2. The KB942903 hotfix for x 64 (also tried x 86) does not install with the message "this update does not apply to your system.
I rebooted several times and tried to erase the directory SoftwareDistribution\downloads, no change.
The log file is not really favourable, weird things only I see is:
[...]
KB94290303:04:16:578: CBS: language pack had error 800f081e. It has been deleted!
[...]
03:05:17:152: EC: CbsClient::Error(error=80092004,message="")
[...]
03:05:17:167: CBS: language pack had error 80092004. It has been deleted!Can someone help me out here?
Thank you in advance!
Stef.
Hi StSz,
1. What is the service pack installed on the computer?
This problem occurs if a previous Windows Update process did not cause the computer to be in a corrupted state. This prevents the installation of any language pack.
I suggest that you reset the Windows Update components and you try to install the pack of language, to check if it works.
How to reset the Windows Update components?
http://support.Microsoft.com/kb/971058
See also the Microsoft article and try the steps mentioned below.
Full Windows Vista Edition language pack version information
http://support.Microsoft.com/kb/925471I hope this helps!
Halima S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
GANYMEDE + configured on the router and the router is in ACS. I can ping from the ACS, but the router cannot establish a connection to authenticate users.
AAA server Ganymede group + hq_acs-1
Server 10.20.17.2
Ganymede IP source-interface GigabitEthernet0/0
!
AAA authentication login default group Ganymede + local
AAA authorization config-commands
AAA authorization exec default group Ganymede + local
AAA authorization commands by default group Ganymede + local 10
AAA authorization commands 15 default group Ganymede + local
nested AAA accounting
AAA accounting newinfo periodic update 60
AAA accounting auth-proxy default start-stop Ganymede group.
AAA accounting exec default start-stop Ganymede group.
orders accounting AAA 15 by default start-stop Ganymede group.
AAA accounting network default start-stop Ganymede group.
Default connection accounting AAA power Ganymede group.
AAA accounting system default start-stop Ganymede group.
AAA accounting resource by default start-stop Ganymede group.
BigTree_3945 #sh ip int br
Interface IP-Address OK? Method State Protocol
GigabitEthernet0/0 10.4.3.1 YES NVRAM low low
GigabitEthernet0/1 10.12.10.26 YES NVRAM up up
Serial0/2/0 unassigned YES NVRAM low low
Serial0/2/0.602 10.12.15.10 YES NVRAM low low
11:08:13.673 Apr 13: MORE: Queuing AAA request authentication 79 for the treatment
11:08:13.673 Apr 13: MORE: treatment demand beginning 79 authentication id
11:08:13.675 Apr 13: MORE: authentication start package created for 79 (cisscdb)
11:08:13.675 Apr 13: MORE: using the 10.20.17.2 Server
11:08:13.675 Apr 13: HIGHER (0000004F) / 1BDD9C34/NB_WAIT/0: started 5 sec timeout
11:08:18.676 Apr 13: HIGHER (0000004F) / 0/NB_WAIT/1BDD9C34: expired
11:08:18.676 Apr 13: HIGHER (0000004F) / 1BDD9C34/NB_WAIT/0: expired, cleaning
11:08:18.676 Apr 13: HIGHER (0000004F) / 0/1BDD9C34: the package of treatment response
11:08:25.834 Apr 13: MORE: Queuing AAA request authentication 79 for the treatment
11:08:25.834 Apr 13: MORE: treatment demand beginning 79 authentication id
11:08:25.834 Apr 13: MORE: authentication start package created for 79 (cisscdb)
11:08:25.834 Apr 13: MORE: using the 10.20.17.2 Server
11:08:25.834 Apr 13: HIGHER (0000004F) / 1BDD9C34/NB_WAIT/0: started 5 sec timeout
11:08:30.836 Apr 13: HIGHER (0000004F) / 0/NB_WAIT/1BDD9C34: expired
11:08:30.836 Apr 13: HIGHER (0000004F) / 1BDD9C34/NB_WAIT/0: expired, cleaning
11:08:30.836 Apr 13: HIGHER (0000004F) / 0/1BDD9C34: the package of treatment response
11:08:43.689 Apr 13: TAC: using default Ganymede groups ' Ganymede"list."
11:08:43.689 Apr 13: TAC +: opening TCP/IP 10.20.17.2/49 Timeout = 5
11:08:51.057 Apr 13: MORE: Queuing AAA request authentication 79 for the treatment
11:08:51.057 Apr 13: MORE: treatment demand beginning 79 authentication id
11:08:51.057 Apr 13: MORE: authentication start package created for 79 (cisscdb)
11:08:51.057 Apr 13: MORE: using the 10.20.17.2 Server
11:08:51.057 Apr 13: HIGHER (0000004F) / 1BDD9C34/NB_WAIT/0: started 5 sec timeout
11:08:54.692 Apr 13: TAC +: TCP/IP open to 10.20.17.2/49 failed - connection has expired; remote host does not
11:08:54.692 Apr 13: MORE: Queuing AAA accounting request treatment 76
11:08:54.692 Apr 13: MORE: treatment of the accounting application id 76
11:08:54.692 Apr 13: MORE: sending AV task_id = 332
11:08:54.692 Apr 13: MORE: sending AV timezone = EDT
11:08:54.692 Apr 13: MORE: AV = shell shipping service
11:08:54.692 Apr 13: MORE: sending AV start_time = 1334329734
11:08:54.692 Apr 13: MORE: sending AV priv-lvl = 15
11:08:54.692 Apr 13: MORE: sending AV cmd = show logging
11:08:54.692 Apr 13: MORE: request for accounts created for 76 (n20j03t)
11:08:54.692 Apr 13: MORE: using the 10.20.17.2 Server
11:08:54.692 Apr 13: HIGHER (0000004C) / NB_WAIT/1/20FD90EC: started 5 sec timeout
11:08:56.058 Apr 13: HIGHER (0000004F) / 0/NB_WAIT/1BDD9C34: expired
11:08:56.058 Apr 13: HIGHER (0000004F) / 1BDD9C34/NB_WAIT/0: expired, cleaning
11:08:56.058 Apr 13: HIGHER (0000004F) / 0/1BDD9C34: the package of treatment response
11:08:59.693 Apr 13: HIGHER (0000004C) / NB_WAIT/1/20FD90EC: expired
11:08:59.693 Apr 13: HIGHER (0000004C) / NB_WAIT/1/20FD90EC: expired, cleaning
11:08:59.693 Apr 13: 1/HIGHER (0000004C) / 20FD90EC: the package of treatment response
BigTree_3945 #.
The AAA Client IP address
10.4.3. * 10.12.15.10
Key
Group of network devices
Test
NJT
AccessLink
(Not assigned)
Authenticate using
GANYMEDE + (Cisco IOS)
RADIUS (Cisco Aironet)
RADIUS (Cisco BBSM)
RADIUS (Cisco IOS/PIX)
RADIUS (Cisco VPN 3000)
RADIUS (Cisco VPN 5000)
RADIUS (IETF)
RADIUS (Mount)
RADIUS (Juniper)
RADIUS (Nortel)
RADIUS (Sepi)
Connect GANYMEDE + single AAA Client (stop recording in accounting in case of failure).
The 10.12.10. range * is listed under the HQ site.
Your help is greatly appreciated.
You said that you can ping the router ACS, have you tried the GigabitEthernet 0/0 interface packages (that is those THAT GANYMEDE + will attempt to use, given the configuration you have posted) supply?
What is the network path between the router and look like ACS (IE, a firewall, NAT, etc.)?
Can you connect to port 49 to the IP address of the router GBA, GigabitEthernet 0/0 of supply packages?
Using VRF?
Which version of IOS?
-
TNS-12545: Connect failed because target host or object does not exist
Hi all
I have two hosts with me. 1 host1 and 2. host2. Host1 have ORCL database. And when I'm doing the tnsping to host2 for database ORCL I get error below.
[oracle@host2 ~] $ hostname
host2.example.com
[oracle@host2 ~] $ tnsping ORCL
AMT Ping utility for Linux: Version 11.2.0.1.0 - Production on 5 April 2014 20:31:40
Copyright (c) 1997, 2009, Oracle. All rights reserved.
Use settings files:
TNSNAMES adapter used to resolve the alias
Try to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = host1.example.com) (PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = ORCL)))
TNS-12545: Connect failed because target host or object does not exist
Here's my tns annually involves Details:
on host1:
[oracle@host1 admin] $ listener.ora more
listener.ora # Network Configuration file: /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = ORCL. WORLD)
(ORACLE_HOME = u01/app/oracle/product/11.2.0/dbhome_1)
(SID_NAME = ORCL)
)
)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = host1.example.com) (PORT = 1521))
)
)
ADR_BASE_LISTENER = / u01/app/oracle
[oracle@host1 admin] $ more tnsnames.ora
tnsnames.ora # Network Configuration file: /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/tnsnames.ora
# Generated by Oracle configuration tools.
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = host1.example.com) (PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = ORCL)
)
)
MYTEST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = host2.example.com) (PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = MYTEST)
)
)
LSNRCTL > status
Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST=host1.example.com) (PORT = 1521)))
STATUS of the LISTENER
------------------------
Alias LISTENER
Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Start date April 5, 2014 20:09:33
Uptime 0 days 0 h 25 min 1 sec
Draw level off
Security ON: OS Local Authentication
SNMP OFF
Parameter Listener of the /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora file
The listener log file /U01/app/Oracle/diag/tnslsnr/host1/listener/alert/log.XML
Summary of endpoints listening...
(DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=host1.example.com) (PORT = 1521)))
Summary of services...
Service "ORCL" has 1 instance (s).
Instance "ORCL", State LOAN, has 1 operation for this service...
Service "ORCL. The WORLD' has 1 instance (s).
Instance "ORCL", status UNKNOWN, has 1 operation for this service...
Service 'ORCLXDB' has 1 instance (s).
Instance "ORCL", State LOAN, has 1 operation for this service...
The command completed successfully
On host2:
[oracle@host2 admin] $ listener.ora more
listener.ora # Network Configuration file: /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = MYTEST. WORLD)
(ORACLE_HOME = u01/app/oracle/product/11.2.0/dbhome_1)
(SID_NAME = MYTEST)
)
)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = host2.example.com) (PORT = 1521))
)
)
ADR_BASE_LISTENER = / u01/app/oracle
[oracle@host2 admin] $ tnsname.ora more
TNSNAME.ora: no such file or directory
[oracle@host2 admin] $ more tnsnames.ora
MYTEST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = host2.example.com) (PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = MYTEST)
)
)
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = host1.example.com) (PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = ORCL)
)
)
Please help me what I do in configuring the listener and tns.
Kind regards
Michel
fb767351-A660-4b18-9a9f-73bc141f6a0c wrote:
Hi all
I have two hosts with me. 1 host1 and 2. host2. Host1 have ORCL database. And when I'm doing the tnsping to host2 for database ORCL I get error below.
[oracle@host2 ~] $ hostname
host2.example.com
[oracle@host2 ~] $ tnsping ORCL
AMT Ping utility for Linux: Version 11.2.0.1.0 - Production on 5 April 2014 20:31:40
Copyright (c) 1997, 2009, Oracle. All rights reserved.
Use settings files:
TNSNAMES adapter used to resolve the alias
Try to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = host1.example.com) (PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = ORCL)))
TNS-12545: Connect failed because target host or object does not exist
If your entry for "ORCL" tnsnames decided to 'contact' indicated info. He tried to send a ping packet to the server identified by "(HOST = host1.example.com)". " Oracle tns transmitted the request to the network stack of BONES for the resolution and routing. Here, 'host1.example.com' host name could not be resolved to an IP address, or if it was, it was an IP address that is a dead-end.
Here's my tns annually involves Details:
We see the details necessary out of your tnsping tns. Since the application never had the host (as is obvious in the error message), nothing about the questions of the listener - he never got.
on host1:
As your example tnsping host2, and says that the error message obvious host1 is nowhere to be found, like the listener, none of the files of configuration on host1 question - demand ever on host1.
[oracle@host1 admin] $ listener.ora more
listener.ora # Network Configuration file: /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = ORCL. WORLD)
(ORACLE_HOME = u01/app/oracle/product/11.2.0/dbhome_1)
(SID_NAME = ORCL)
)
)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = host1.example.com) (PORT = 1521))
)
)
ADR_BASE_LISTENER = / u01/app/oracle
[oracle@host1 admin] $ more tnsnames.ora
tnsnames.ora # Network Configuration file: /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/tnsnames.ora
# Generated by Oracle configuration tools.
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = host1.example.com) (PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = ORCL)
)
)
MYTEST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = host2.example.com) (PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = MYTEST)
)
)
LSNRCTL > status
Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST=host1.example.com) (PORT = 1521)))
STATUS of the LISTENER
------------------------
Alias LISTENER
Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Start date April 5, 2014 20:09:33
Uptime 0 days 0 h 25 min 1 sec
Draw level off
Security ON: OS Local Authentication
SNMP OFF
Parameter Listener of the /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora file
The listener log file /U01/app/Oracle/diag/tnslsnr/host1/listener/alert/log.XML
Summary of endpoints listening...
(DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=host1.example.com) (PORT = 1521)))
Summary of services...
Service "ORCL" has 1 instance (s).
Instance "ORCL", State LOAN, has 1 operation for this service...
Service "ORCL. The WORLD' has 1 instance (s).
Instance "ORCL", status UNKNOWN, has 1 operation for this service...
Service 'ORCLXDB' has 1 instance (s).
Instance "ORCL", State LOAN, has 1 operation for this service...
The command completed successfully
On host2:
Okay, the problem being that a client on host2 couldn't solve a connection to hos1, these could be revealing.
[oracle@host2 admin] $ listener.ora more
listener.ora # Network Configuration file: /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = MYTEST. WORLD)
(ORACLE_HOME = u01/app/oracle/product/11.2.0/dbhome_1)
(SID_NAME = MYTEST)
)
)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = host2.example.com) (PORT = 1521))
)
)
ADR_BASE_LISTENER = / u01/app/oracle
Except that in the example, we work with, host2 is the customer, trying to reach a database on host1. Any listener on host2 is totally irrelevant.
[oracle@host2 admin] $ tnsname.ora more
TNSNAME.ora: no such file or directory
[oracle@host2 admin] $ more tnsnames.ora
MYTEST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = host2.example.com) (PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = MYTEST)
)
)
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = host1.example.com) (PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = ORCL)
)
)
It's the only tns configuration file that is important for the problem at hand. And we already knew what he said, since the output of your command of tnsping.
Please help me what I do in configuring the listener and tns.
Kind regards
Michel
Is "host1.exampl.com" the real hostname of your machine "host1"? Or you made that blur in your ad - thing quite legitimate to do this for security reasons.
Whatever, this is not really a matter of tns, unless of course 'host1.example.com' is really what you put in the tnsnames file, but your server "host1" became really something else.
Assuming that 'host1.example.com' is the correct value, debugging starts with the following:
[oracle@host2 admin] $ ping host1.example.com
[oracle@host2 admin] $ tracerout host1.example.com
-
Can't get add ons, addons video does not work "any format of video support.
I tried to download a coupon printer add on, but there is no download. Troubleshooting video wouldn't play because he said "not format of video support.
Note that an error 'no format video support' is usually caused by web pages that use the HTML5 media player to play a video and any appropriate format is available or the server is not configured correctly and does not send the file with the MIME type supported.
- https://developer.Mozilla.org/Properly_Configuring_Server_MIME_Types
- https://developer.Mozilla.org/How_Mozilla_determines_MIME_Types
You can try to see if you can open the video in a new tab via the context menu (see video).
-
> I'm trying to uninstall and reinstall my HP printer.
> In my Add/Remove Programs list, there are several HP programs listed and I started to remove them (has done this in the past with no problems).
> The last of them, I clicked on delete does not give me the options to 'Change/Remove '. The program is called "HP PSC700 Series" and seems to be the main
part of the installed software - it is a 243Mbs size.
What I tried:
> I have reinstalled the printer from the CD program in the hope that it can replace every thing and then I could uninstall correctly - that didn't work.
> Look in C:\Program Files - there was no Hewlett Packard folder
> Look in the start menu > all programs - there was a list of Hewlett Packard who has expanded the. When extended out, he said "empty folder".
> Posted the problem on the HP Forum twice in two months, got no response.
> Learned how to remove the registry keys under "Software" in HKEY Local Machine and HKEY Current User. Also under HKEY USERS > default > Software.
None of this has worked.
> Gave a link to a family member to Support MS - "How to manually remove programs from the Add/Remove tool" I followed these instructions and
the program remains still present in Add/Remove programs.
Does anyone know how I can remove this program that has no program folder, no registry keys, but still works? I can still print from this computer, but cannot access the HP Director (a function to scan, print, clean & align print head, etc.), which is what started this process of trying to uninstall/reinstall the program.
Any help would be greatly appreciated...
Photo TakerYN
My system is;
Dell Dimension 4550
Windows XP Pro w/SP-3 (version 2002)
Of photo TakerYN...
This message can be considered "solved!" I was finally able to remove the program with the HP disk. I tried to reinstall (overwrite) the program, but I received a message that the installer has detected that the program is already installed. I wanted to try it manually, so I 'opened' the disc, you click on "setup" and received the same message. At this point, I was ready to try anything and noticed the "Launcher" icon and thought, what the heck, can't hurt to try at this stage, so I clicked it. I wasn't expecting the screen, I had, who said that it would be to uninstall the program. I thought it was too good to be true and easy way (after all), but after that it's over, I checked my Add/Remove programs and my 'problem' program was gone.
Thought I would post this so anyone who might encounter the same problem can try this.
Photo TakerYN
-
HP 1012 printer won't ADD. Windows Vista does not recognize the printer or port.
Windows does not add 1012 HP printer.
Although compatible with Vista: http://www.microsoft.com/windows/compatibility/windows-vista/Details.aspx?type=Hardware&p=LaserJet%201012%2015ppm%20600x600dpi%208MB%20USB&v=HP&uid=Q2461AABA&pf=0&pi=0&s=HP%20Printer%201012&os=32-bit, a free download is required (whatever that means - read the above yourself). This is perhaps why you cannot install. While on the HP site, get the most up-to-date drivers, firmware or software for this printer and use it for installation (which came on the drive or what you perhaps obsolete).
I hope this helps.
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
tabular: Add the line: line does not get inserted
Hi all
I have a tabular presentation based on a products table, quantity, unit_price and product_id columns
in the form of Tha also has a calculated field price (unit_price * amount) and a total on the price column
When the user changes unit_price or quantity, the price is calculated together total whith, this is done using javascript
I want to accomplish is add when you click line, and then the total row of the report should remain the last row
I managed to do it, but when I add a line and then fill in the same row is ignored by apex, 0 rows inserted
This is because when you change a field in the hidden input field fcud_xxxx does not change to would be "to 'C'
How can I fix this, I have to write a change event for each column?
any other ideas?
I put the code on apex.oracle.com
workspace: martijnke
login/password: demo/demo
application: 78396: apex advance
Start the application and click orders, and then click on any order to go to the edit page 4 control elements
Click Add line and see what happens
the javascript code is on page 4, the function is called switch_last_row()
I found this in widget.tabular.js:
// Register change handler on new row form fields, change "fcud_*" hidden element to C if a change occurs lNewRowIndex = tabular.pad( ( tabular.gNumRows + tabular.gNewRows ), 4 ); $( ":input[id^=f][id$=_" + lNewRowIndex + "]", apex.gPageContext$ ).change( function() { $( "#fcud_" + lNewRowIndex, apex.gPageContext$).val( "C" ); });
Why change this event not working for my vacuum dial-up?
DB: 11 GR 2
Apex 5.0.2
KR
Martin
Martijnke wrote:
I have a tabular presentation based on a products table, quantity, unit_price and product_id columns
in the form of Tha also has a calculated field price (unit_price * amount) and a total on the price column
When the user changes unit_price or quantity, the price is calculated together total whith, this is done using javascript
I want to accomplish is add when you click line, and then the total row of the report should remain the last row
I managed to do it, but when I add a line and then fill in the same row is ignored by apex, 0 rows inserted
This is because when you change a field in the hidden input field fcud_xxxx does not change to would be "to 'C'
How can I fix this, I have to write a change event for each column?
any other ideas?
I put the code on apex.oracle.com
workspace: martijnke
login/password: demo/demo
application: 78396: apex advance
Thanks for the creation of the example. Makes it so much easier to understand the problem and to work there.
Start the application and click orders, and then click on any order to go to the edit page 4 control elements
Click Add line and see what happens
the javascript code is on page 4, the function is called switch_last_row()
I found this in widget.tabular.js:
- Sign change on the form fields Manager new line, change "fcud_ *" element hidden C if a change occurs
- lNewRowIndex = tabular.pad ((tabular.gNumRows + tabular.gNewRows), 4);
- $(«: entrée [id ^ = f] [id$ = _ » + lNewRowIndex + «]», apex.gPageContext$) .change (function() {}
- $(«_#fcud__»_+_lNewRowIndex,_apex.gPageContext$).val ('C');
- });
Why change this event not working for my vacuum dial-up?
It does not work because the use of the method. html() in this function replaces the DOM elements these managers events are related to the:
function switch_last_row(){ var l_total = $('td[headers="CHECK$01"] b').parent().parent().html(); var l_last = $('td[headers="CHECK$01"]'); var count = l_last.length; //$('td[headers="CHECK$01"] b').parent().parent().html(l_last[count - 1].innerHTML); var v_html = $(l_last[$('td[headers="CHECK$01"]').length - 1]).parent().html(); //alert(l_total); //alert(v_html); $(l_last[count - 1]).parent().html(l_total); $(l_last[count - 2]).parent().html(v_html); }
Event managers are left intact by using an approach much more simple that moves the total line node below the newly added in the DOM instead of exchanging their content:
function switch_last_row() { var totalRow = $('td[headers="CHECK$01"] b').closest('tr'); totalRow.next().after(totalRow); }
I created a demonstration of this in page 4 a new application in your workspace. However, this leads to a number of other problems. As I'm not sure of the magnitude that these additional questions were present or planned in the original, I left things to this page 4 and started from scratch on pages 586 and 587. In general, the JS code in the example seems to be too procedural. It does not entirely the ability to work at a higher level of abstraction using jQuery (' write less do more ") and the DOM objects. Doing this, in conjunction with dynamic actions APEX gives more compact code, better separation of concerns and an application that is much easier to debug and maintain. Compare the use of the CSS level page and unique dynamic action to bind several columns of report versus change events manually adding/changing the attributes of style event and online at the column level.
-
"Add a printer" window does not display DeskJet 6988 in Snow Leopard 10.6.1
I have a DeskJet 6988 printer that is connected wireless to my home network. I have two Macs, two Snow Leopard running that allows to connect to my DeskJet 6988 Hello impression. After the upgrade, the "Add a printer" window would not show my printer. I installed HP v2.1 for Mac OS X printer drivers (available here: http://support.apple.com/kb/DL907) and also tried to reconnect my printer with an ethernet cable.
Message edited by aburks on 09/19/2009 11:19I was able to manually add my printer by following these steps:
-Install Mac OS X 10.6.1 using the software update
-Install the latest drivers from HP printer from here: http://support.apple.com/kb/DL907
-Open System Preferences and go to the "Print & Fax".
-Click the "+" button in the lower left corner of the window of preferences "Print & Fax".
-Click the icon of the "intellectual property" at the top of the window "add a printer".
-Select "HP Jetdirect - taken" in the "Protocol:"drop-down box.
-Type the IP address of your printer in the "address:"field.
-Make sure that the "print using:" drop-down list reads ' HP Deskjet 6980 series ' "»
-Click on 'Add' in the lower right of the window "add a printer".
Your printer should work! The key ingredient is to select 'HP Jetdirect - taken' in the 'Protocol' drop down box, I tried "Line Printer Daemon - LPD" and it did not work.
Message edited by aburks on 09/19/2009 11:20 -
'Add files to download' does not work for my custom css file...?
From now on, I have several snippets of CSS stylesheet in the HEAD of various pages tag, but I want to combine them all into a single file "custom.css" and it just a link to specific pages. So I have created "custom.css" in my 'active' projects folder and want to add it then my site by 'Add files to download' under the menu 'File' in MUSE. But I always get the message
The X:\xxx\xxx\xxx\Assets\custom.css file is not a supported file format
Is this possible? I think that used to work some time ago, I had a model that uses custom css files... Why is a css file not supported? Does not make much sense to me...
I CAN add files jpg or svg to png oder so it doesn't seem to be a problem...?
Thank you!
Custom CSS in Muse can be placed at the head of each page.
It there's no way that Muse can locate the css custom code in an active file and apply it to a specific page.
Muse export all css on each page and stores it in a separate css file.
-
Add the table list does not view database in Configuration Manager
Hello
I try to add a view of database in the configuration table tab manager. The display does not appear in the list of tables available in WCM 11.1.1.6 version. This is possible in the 11.1.1.4 version. Anyone else facing this problem?
Thank you
SoumyaSoumya salvation,
I think that this can be resolved with EBRIncludeViewsInTableList = true set in config.cfg to the server of the University Complutense of MADRID.
The recent MLR 12 also has the fix to display views of DB tab Table of the WCC.
Thank you
Srinath -
Switch to police and the size of the theme add on installed but does not appear in tools
Hello:
I never had no problem with installation and the use of theme font & size add on front. Now it shows as an installed extension, but does not appear in the Tools menu. I'm currently under T-bird 45.4.0 with 16.04.1 Lubuntu.
Any ideas?
Thank you
Bill
IIRC you need also the namespace statement, below, the first thing in your userChrome.css file. So it would look like:
/* * Do not remove the @namespace line -- it's required for correct functioning * set default namespace to XUL */ @namespace url("http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul");
/* * Make all the default font sizes 20 pt: */
* { font-size: 20pt !important }
Maybe you are looking for
-
Can you watch a movie download rented without an internet connection?
Can you watch a movie download rented without an internet connection?
-
15 t: just got new HP - computer laptop 15 t Windows 7 Pro
I just receiLtop my brand new ved HP custom - 15 t, Windows 7 Professional and they forgot to add my backlit keyboard. Is there something that I am missing? Is it possible to turn on that I don't know everything? Or simply not include? And this is t
-
IWant to change my password, but I do not have a Firefox button on my browser
I joined and watched the video about changing your saved passwords, the problem I have and the video told me to click on the Firefox button. I don't have one on my browser. I do not know which toolbar I have on my browser, but there is no Firefox but
-
Webcam freezes using MS messenger on Equium U400-145
Hi guys Can someone help me please... I have problems with my built in chicony camera on my laptop U400-145 Finalis.I've only had the laptop for a little more than a month and iv of the big problems with it. Whenever I use my webcam in a chat in msn
-
I have the original Droid, but today, I put my hand on Droid 2 a friend... I love the bike Widgets! Is it possible to get them on the original Droid? My contract is not for me to get a new phone for about a year.