Ethernet card satellite 2710 Urgent

Similar Questions

• Satellite L40-139 - ethernet card.

  Try to install broadband s/w on the new laptop, but it tells me that I need an ethernet card. What Bing Crosby is that and how do I get one? I asked at PC World, which were useless. Can I do it myself or do I have someone technical?

  Hello Rod

  I don't really know what you're doing wrong, but your laptop comes with OS pre-installed and configured. The network card on your laptop should be configured correctly and if you connect the LAN cable in LAN port (in the middle of the back) the Green LED should be lit. If you use Internet orange LED should blink.

  Then please give us a little more info about your laptop. There your laptop to factory settings of your laptop or your own installation of the OS? Check please if the network adapter is listed and installed properly in Device Manager.

• Satellite U400-17V - Ethernet card disappeared

  I have a problem with the Ethernet card. After replacing the hard drive, the new system was installed as well as all the drivers. Everything was OK. I use a Wifi connection for most, but a few days ago, I use cable and nothing happened. There is no Ethernet card in Device Manager.

  I have downloaded the drivers and tried to install it but I do not know what Ethernet card on my computer! The driver is more than 20 different cards. So I tried to check on the Toshiba support site, but it says that it cannot find my computer by serial No.. ! There's also my role model isn't available (Inroom U400-17V)!

  What can I do? Please help me.

  If the card is not listed is maybe some unknown device listed in Device Manager?
  What operating system do you use?

• Satellite 1730 - need driver for ethernet card

  Hello. I need driver for Toshiba S1730 for Windows Me ethernet card. Ethernet card deactivated in the BIOS or by button? Interface Ethernet not serving in Windows

  Hello

  As much as I know this unit has no Ethernet card onboard and there is a reason why it cannot be determined by the OS. I'm sorry.

  Good bye

• Cannot install ethernet on Satellite 1710 CDS

  Hi, I have Satellite 1710 CDS.
  This laptop has RJ45 wording "Ethernet" connector on the rear side.

  In my book there is not written anything on the inbuild ethernet card. Photos of manual shows back of laptop, it has drawn no ethernet connector, but my laptop has had! Is this possible?

  Why toshiba is not talking about ethernet in the manual for CD of Satellite 1710 and my 1710 has? I don't understand.
  Windows ME cannot recognize this net adapter. I don't know what drivers should I look for. Please help me or give me advice. Thank you.

  Hello

  Sorry, I have you dissappoint! Satellite 1710CDS has NOT built in LAN!

  The cover has only a black RJ45 model at the backsite without function!

  :-(

  Rudi

• Pavilion 17: Speed of the Ethernet card

  I've been struggling with my internet provider for more than a year now, yesterday they tell me that my laptop is at fault!

  The problem is my internet speed, the wireless I get close to 140mbs, but when connected to my router I only get 90mbs at best? My provider now tell me, it's because of my ethernet card, he is only able to 100mbs.

  If this is the case, how increase speed, or replace the adapter?

  Concerning

  M

  Hello

  The following link shows the specifications of your machine:

  http://support.HP.com/lt-en/document/c04722760

  and Yes, it has only:

  Integrated 10/100 BASE-T Ethernet LAN

  as mentioned above (welded integrated means). Please use my previous answer to the option.

  Kind regards.

• Installation of Marvel Yukon 88E8040T Ethernet on Satellite U405 using Linux

  Sorry for my English. I am writing from Brazil, and the only reason I'm not posting in Portuguese is because I want to let this information available for a larger number of users.

  I had a few problems although the Marvel Yukon Ethernet PCI on my Debian installation. I bought this laptop because it seems feet all my needs, with a good size RAM, processor and HD (the only problem is the computer keyboard, which are starting to make noises of ugly typing after a while).

  This post is dedicated to helping other users who want to use almost any flavor of Linux to their specifications U405 series.

  In the first place, in order to have a work of U405-S2854 laptop with good resolution of 1280 x 800, I had to abandon my old friend Debian Etch (stable - 2.6.18 kernel) and installation of Debian Lenny (testing - 2.6.24 kernel) because the package 'xserver-xorg' in Debian Etch problems to recognize the Intel VGA controller. I spent hours looking for a good solution to [www.intellinuxgraphics.org | www.intellinuxgraphics.] org Web site] without success.

  Well well... a little conversation and a LOT more action:

  If you have installed a 2.6.18 kernel or the oldest one, the X server will probably be able to recognise your VGA controller and configure it as a VESA adapter, using resolution 1024 x 768, if you are satisfied with this (poor) resolution just go on the site [http://www.marvell.com/drivers | http://www.marvell.com/drivers] download, install your new Ethernet controller and live happily ever after.

  But if you use a 2.6.24 kernel from, then the X server can really identify your "+ VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller +" you can face some problems to install your Ethernet card. The good news is that I found someone who has solved the problem!

  All you need to do is open a terminal and copy - paste the following commands.

  . $ sudo knew.
  (enter your password)
  . # rmmod sky2
  . # cd/lib/modules / 'uname - r' / kernel/drivers/net
  . # cp Pei sky2.ko {, .orig}
  . # perl - pe s/\0\0\x6c\x43/\0\0\x55\x43/g ' sky2.ko.orig > sky2.ko
  . # echo sky2 > / etc/modules
  . # modprobe sky2

  Here's the URL that has made my life easier [http://ubuntuforums.org/showthread.php?p=5285654#post5285654 | http://ubuntuforums.org/showthread.php?p=5285654#post5285654]

  I hope this tip is helpful to you as it was for me!

  Kind regards.

  Wow, your teaching is very good and very clear. I appreciate it because I tried to install Ubuntu on my Sat A200 and this machine has also a Marvell chip.

  Thanks for the great info. :)))

  Welcome them

• Do I need a PCI Ethernet card on my Mac mini to connect to the Ethernet connection?

  I tried to set up my mac mini on my ethernet newly updated. Nothing seems to work. When I scanned the information system and click on the Ethernet cards, I received the message: this computer does not have any Ethernet PCI cards installed.

  I checked and I had the latest version 3.28.2 noted Incompatible Kernel Extension Configuration Data, which has been a problem for other people.

  Is there another way to do this work?

  I'm in IOS 10.11.1 on a Mac mini (mid-2010)

  Ethernet is built in and can not be an addition except as to adopt USB Ethernet.

  -Try to reset memory NVRAM/PRAM and SMC

  MacIntel: Reset of the controller (SMC) system management

  Subject of memory NVRAM and PRAM

  -Try to start safe mode

  OS x: what is Safe Boot, Safe Mode?

  -Start to recovery and repair the startup disk

  OS X: on OS X Recovery - Apple Support

  -If it is repairable reinstall the OSX

  How to reinstall OS X on your Mac - Apple Support

  -If you do not have a backup using disk utility to restore the internal drive to an external drive, so that you can try to recover the data.

  Format the boot disk and then do a fresh install of Mac OS x

• iMac mid-2010, El Capitan, just missing Ethernet card.

  Hello.

  From one day to the other, my card (PCI) ethernet of iMac is just disappeared: on this computer, there is no ethernet installed PCI card.

  It is not indicated in the profile system ethernet card more.

  Airport (WIFI) is still there and works.

  I already reset the PRAM and SMC - without success.

  Funny that with Win7 the iMac even works perfectly using the "disappeared" ethernet ports

  Also my switch show my all time, there's a 1 Gbit connected device (which is this iMac).

  netstat - I have en0

  Name, address network Mtu Ipkts Ierrs Opkts Oerrs Coll

  = > not found interface

  I already spend several hours to find a solution, but so far without success.

  Help, please.

  PS: I don't want to reinstall my OS X!

  I had the same problem. It seems to be a silent security update went wrong. More to this topic on Reddit:

  https://www.reddit.com/r/Apple/comments/47tfos/warning_software_update_03151913 _ breaks_ethernet.

• Is there a speed limit on the ethernet cards?

  Hey guys do you have an idea who is at - it a speed limit on the Ethernet cards, because I can use the P2P so fast that, after awhile, my internet connection is stopped as, I can't do anything unless I unplug, wait a while and connect again. Don't you think that it is a hardware or software problem?
  By the way: my Ethernet card is Marvell Yukon 88E8036 PCI-E Fast Ethernet Controller.
  I need your help. Thank you.

  Hello

  In my opinion, if you have some problems with the internet connection the reason should not be any kind of speed limit but also other different reasons.

  In your ad, you're not mentioned that you do exactly. You write e-mails or do the download of two different movies and many mp3 files?

  As far as I know if you do the full download the connection can be slowed or even stopped by FAI. Is your cable may be defective. The LAN cable has 8 lines and if one line is faulty speed will fall automatically.

  I also recommend you use a malware scanner and check the unit.

  Good bye

• installation of memory on toshiba satellite 2710

  How can I install memory toshiba satellite 2710
  I don't know where it is based
  I try under the k/Board, but I'm not
  can someone help me
  Thank you

  Hi bobby,.

  have you turned the laptop and search below if you would have found no cover which was mounted by screws!

  You are right, some Toshiba laptops have the RAM next to the keyboard, but there are also models with modules memory RAM on the bottom!

  Try it!

  Theo Bye

• Ethernet card problem

  Hello

  I have a problem. I don't see my network card settings. Ethernet cable works, I try another PC. But this pc does not see the card settings. That the ethernet card will be lost, I think. I just ask; Operating system problem or hardware problem, I don't know. How do I test it?

  (Please, don't see my English grammar is not good, I know)

  How to apply the best question

• HP Compaq 8200 Elite - XL510AV: need help to find the form factor small PCI Ethernet card

  Hi guys, I hope one of you can help me with this. I need a card PCI Ethernet single port for a HP Compaq 8200 Elite Small Form Factor computer.

  From what I see, the motherboard has a PCIe and two PCI card slots.

  Computer model is XL510AV

  Any help is appreciated.

  Hello

  The following can help:

  http://www.StarTech.com/au/networking-IO/adapter-cards/10100-1000-Mbps-32-bit-PCI-Gigabit-Ethernet-card~ST1000BT32

  It has 2 brackets for standard and one for the low profile, you can swap around.

  Kind regards.

• Ethernet card disappears after installing SP3 (T60 1951 - 45G)

  Hello!

  I updated my Windows XP with Service Pack 3 yesterday and now it seems my ethernet card has disappeared. i.e., it acts to it has been disabled in the BIOS (not appearing is not in Manager devices etc..). I tried entering BIOS, hide, start, restart, enable in the BIOS and new shoe but no luck. In another thread, I've seen update people complain of broken MS and a clean install could solve the problem.

  My question is if someone else had the same experience and if it is solvable without a clean install of a simplified SP3.

  My machine is a T60 1951 - 45G.

  Everything else seems to work fine by the way, but I'll post if I find additional problems.

  It is reported of SP3 break connectivity LAN/WAN on many laptops (TechNet) MSFN, MS forums. Not quite sure that the resolution is at this time and not quite certain that a new simplified installation of SP3 would be a fix for the problem. For some, SP3 disable WAN completely, while others issue with LAN. It seems that some drivers 'most recent' are the culprits.

  Before doing something drastic, try reinstalling the Lenovo LAN drivers to see if that fix it, otherwise you may just have to go back to SP2 (nothing wrong with it on an existing machine, otherwise it works without problems). SP3, after all, is above all a cumulative (but with 'new') update, so really there is no big reason for updating a working and XP - SP2 system with this new service pack update.

  On a side note, remember to check if installed KB941644 inadvertently as part of the update - it's a "fix" that is known to cause a number of problems of connectivity (insoluble).

  You can see here (MS XP questions) to see if there is a solution to your problem.

  Hope this clears up things

• Pavilion a130.no Ethernet card drivers?

  Friends,

  Working on an a130 Pavilion where the drive crashed suddenly, I need a driver for the ethernet card on this machine. Time is tight, so to speak, so I hope that I can find and have the PC online before Monday. Check the download page for this model does not work, here I find drivers for the graphics and sound cards, but no ethernet driver.

  Happier if you can send me this driver or can tell me where to find it for download.

  Best regards

  Hello:

  The form of State that your PC comes with Windows XP as operating system, correct?

  The motherboard plug indicates it has the chipset nForce 2.

  You will need to install the nForce 2 chipset driver that will load the network driver as well as other drivers of the motherboard.

  http://www.nvidia.com/object/nforce_udp_winxp_5.10.html

  Paul