Event MultiLoadAction script - impossible to access the contents of the parameter "objLSItem".

Similar Questions

• TuneUp Utility has been installed on a trial basis, it changed the things that made it impossible to access the C:\ drive to install the important updates and uninstall Tuneup Utilities.

  On my old Dell with Windows XP I installed Tuneup Utility on an experimental basis, it changed things that made it impossible to access the C:\ drive to install the important updates and uninstall Tuneup Utilities.

  Anyone have a solution?

  Help, please.

  Software support to the YOU seem hopeless, they donot even read the request entirely to meet the last 8 weeks and many emails in series.

  Hello

  I suggest you to follow the steps in this link and check if it helps:

  Method 1:
  Try to uninstall the utility and check if it helps:
  http://support.Microsoft.com/kb/307895

  Method 2:
  Try to restore the computer to the point before you install the utility and check if it helps.
  http://support.Microsoft.com/kb/306084

  It will be useful.

• Impossible to access the contents of a window (PopUp)

  Hello
  
  I'm trying to access the contents of a MovieClip I placed inside a PopUpWindow component, but cannot figure out how to do this. I've created the window with something like this:
  var SAedit_win:MovieClip = mx.managers.PopUpManager.createPopUp (_root, window, true, {closeButton:true, title: "Arterias Sistemicas", contentPath: "contentSA"});
  
  With this code, the window IS correctly created and the "contentSA" MovieClip (which is in the library) is properly indicated. However, I wanted to access the objects inside the "contentSA', but I can't find a way to do it. I have already tried:
  -SAedit_win.content (which is read-only...)
  -SAedit_win.contentsPath (which of course did not)
  -SAedit_win.target
  -SAedit_win.contentSA
  
  Can someone help me with that please?
  
  
  Tanks in advance
  
  JLonardoni

  Well, I give up. I looked everywhere on the net and found out that I'm not the only one. It is a not uncommon problem, but I think he has no answer, because all the forum posts I found unanswered.

  So, I have developed my own window with everything I wanted... It is not very OO, but it does the job.

• Impossible to access the account, the message says: "you cannot access your account because your parent has blocked it.»

  Changed the title: I opened an account and set up parental controls. It is impossible to access that account the message said "you cannot access your account because your parent has blocked it."

  I opened an account and set up parental controls. It is impossible to access that account the message said "you cannot access your account because your parent has blocked it."

  Hello Nimaakhaven,

  The best place to ask your question of Windows Live is inside Windows Live help forums. Experts specialize in all things, Windows Live, and would be delighted to help you with your questions. Please choose a product below to be redirected to the appropriate community:

   

  Windows Live Mail

  Windows Live Hotmail

  Windows Live Messenger

  Looking for a different product to Windows Live? Visit the home page Windows Live Help for the complete list of Windows Live forums to www.windowslivehelp.com.

• ReadyNAS Duo v2 impossible to access the start menu

  Hello

  I am new in ReadyNAS, I bought this one for a long time but only used for a few days... I try to use again, I tried to upgrade the firwmare the/admin /, but surely a bug appear, because after restart-auto, I can not access the /admin/ with my own password or the default password factory.

  So, I am trying to go to the Start Menu to use that reinstalling the operating system. I & pressed the reset button, press the power button and wait... wait... wait... the 5 LEDs light up but that never happen :-(

  I have only 2 LEDs for disks (2 at the same time), and then a few seconds later, only the right one.

  Maybe I can try with a Boot USB Recovery but I can't find where to download (the search engine return nothing on the download page)

  Thanks for your help!

  Hi lakano,.

  Welcome to the community!

  Can you confirm the version of your ReadyNAS unit HW? It could have been labeled as ReadyNAS V2, but it could be a V1. Send me a PM with S/N so I can check.

  Kind regards

  BrianL
  NETGEAR community team

• Impossible to access the system restore, getting the error "system restore has been disabled by group policy.

  Recently, I was hit by a virus that, among other problems, he blocked my access to the system restore to clear it. After having had my pc repaired I can not even access the system restore or my registry. I get a message from that system restore has been disabled by group policy. It's my own pc and I am the administrator. I've tried a few things without success. I hope someone can help me with this. I have the vista operating system.

  1. click on start, run and type regedit.exe , and then press enter

  2. navigate to the following key:

  HKEY_LOCAL_MACHINE-Software-policies-Microsoft-Windows NT------SystemRestore

  In the right pane:

  • Delete the value DisableConfig
  • Delete the value DisableSR

  3. exit the registry editor.

  Other tips, tricks and support are available at: www.waltwachon.weebly.com

• Impossible to access the advanced boot menu

  Original title : Safe mode for access to the

  When I start my laptop it goes right into the Boot Device menu. How to do in safe mode? By pressing F8 does nothing. I use windows XP

  Hello barber147,

  What is happening on the machine is that you have to start safe mode?

  Sometimes we don't see the prompt for F8 to access the start menu.

  Often find it me easier to continually press F8 during the boot process

  Let us know.

  Best regards

  Matthew_Ha

• XP has changed the user accounts is now impossible to access the administrator account

  Something has gone wrong when changing my user accounts. I don't have an administrator account can create a. I can't even restore my system. It doesn't let me do anything! What to do Help!

  You use the built-in account named "Administrator"?  If so, the behavior you describe is "a feature, not a bug."

  Windows XP hidden administrator account when a user account is created (because it's a good idea not to use administrator systematically; it should be saved for emergencies).

  You access the administrator account integrated differently depending on whether you have XP Home or XP Pro.

  For XP Home:

  You must restart in Mode without failure.  Restart the computer and start typing the F8 key as soon as the initial startup process is finished.  If you see the Windows logo, you waited too long and you have to restart again.   If you do it right, you will see the white Advance Boot Options menu on black (image).  Use the up/down arrows and the Enter key to select Mode safe because your mouse does not work on this screen.  Once the computer starts in Mode safe mode, the administrator account will appear on the Welcome screen.  If you have not changed the password, the password is blank (no password).

  For XP Pro:

  Follow the signs for XP Home Edition, or in the Welcome screen, with no logged-in user, press CTRL + ALT + DELETE twice.  The 'classic' logon box will appear.  Type "Administrator" (without the quotes).  Once again, the default password is empty.

  Once you enter the administrator account, create an account with "computer administrator" privileges for occasions when you need (for example, to run the system restore or create accounts).  You can use any name you want (other than Administrator), such as MyAdmin.

• XP sp3 impossible to access the Options Menu with the keyboard

  When you try to access the security mode of the Advanced Options Menu does not respond to the keyboard. Cannot use the arrow keys to select or even select normal startup. Completely locked. Must restart. Have installed the latest drivers for the millisecond (MS Intelli Type Pro and drivers dated 29/06/2010 ver. 8.0.2190). When accessing the BIOS function and XP and all apps also all keys.

  Keyboard purchased 26/01/2011. MS Wired Keyboard 600 model 1366.

  You wish to have access to safe mode back

  The system I have, I built from the bottom upwards, it's been about 5 times. Keyboard is USB, HARD drive is IDE.

  The reason I wanted was fashion safe to remove the access and the application that cannot be removed using my program uninstaller or add/remove Control Panel. This is a secure application that I used for the password protect and hide the request. I installed the new application and should have opened the former access to files, but not installed the first new. And now, the old file is protected course. But in Safe Mode saved the day. I used msconfig to start safe mode. Neverhad this happen in the past, the only change is the keyboard and Sp3.

  Hey once again thanks for your time, really appreciate it.

• Cannot install the router firmware-impossible to access the knowledge base to do.

  Hello

  complete newb here.

  I'm having some trouble with the abandonment WRT610N router whenever I put on new devices on the network and I go to the download of the firmware update - FW_WRT610N_1.00.03.15_20090514- but I don't know how to install it. It is a .bin file.

  I'm reading the F.A.Q.S. on how to install a firmware on the router, but I can't access the database of knowledge here and I can't create an account to access either.

  How to install firmware?

  I tried just looking for updates via Lela and he says no update.

  I can't finad any program to open the .bin file.

  Duane

  I managed to get the update of the firmware.

  The problem is I think that my router is pretty buggy and unfortunately I got a defective router for purchase.

  It kept stalling on me and go through the steps of power flashing randomly.

  I had replaced it where I bought it and the new router is not a problem at all.

  Thank you for all your help

• OffficeJet 6500 a. Impossible to access the Control Panel on Windows8

  I have a new laptop and you downloaded the complete HP software features. The test printing and scanning seem to work correctly. However I can't find how to access the Control Panel on my desk. He has not created an icon in my windows8 start pages.

  I have a button that says HP Printer Control allowsme to buy ink and my printer is offline. There is no scan options.

  How to access the control of printing/scanning panel full or, better yet, bind it to the control of the printer button.

  Thank you

  Hi SaraLK,

  I can help you find the digitization program. In the start screen or screen of tile, without clicking anything that this, start typing the HP. You should see the Officejet 6500 a, or even click on files and it should appear. When you click the Officejet 6500 has the help of the printer opens, you can also click with the right button on the icon and PIN to the taskbar so that it is always available right form the office.

  Here is another way, you can create shortcuts taskbar Windows 8 for your favorite programs. Please take no offense to the referenced site, it helps to make everything easier!  I use it all the time.

  I hope this helps.

• Impossible to access the records after you have reinstalled windows 7

  I recently upgraded my pc with a new cpu, mobo and ssd.  I have re-installed windows 7 on the new ssd (earlier it was installed on my hard drive). My hard drive with windows is still a primary with windows installed on it, partition even if I am unable to boot with it.  I didn't fit I want to backup my data once I have windows running on my new ssd.
  The problem that I face is now that I'm unable to access some files on my secondary drive. I tried to change the permissions for these folders using my admin account, but when I apply the new permissions, I get access denied error.
  The problem is limited to only a few files and I am able to access the others.
  Please help me with this

  The problem is limited to only a few files and I am able to access the others.

  You may need to take possession of the records problem - see here:
  http://social.answers.Microsoft.com/forums/en-us/w7network/thread/24bdf172-2DBC-43b8-995d-a99b6a81413c/

• Workflow started by the script fails to get the parameter passed securestring

  Hello

  I use a script (linux) to start a workflow ( defined by software for the script ;-) thank This mechanism works very well.

  However, yesterday we removed an input parameter in a workflow of some (and also deleted from the script) and now it fails.

  Before the change, the input parameters were: vmName (String), vmUser (String), vmPassword (SecureString)

  After the change, the input parameters are: vmName (String), vmPassword (SecureString)

  In the script, I can add statements to prove that the password has a value and that it is past.

  In the workflow, I've added a task containing a script that is executed first and shows that the value of the vmPassword input parameter is empty.

  The output xml from script of appeal shows also that the value parameter is 'lost '...

  See the definition of setting correct for vmName on lines 11 and 12.

  See a definition of parameter incorrect for vmPassword on line 13 - the part missing "secret < SecureString > < \SecureString >...

  <?xml version="1.0" encoding="UTF-8" standalone="yes"?>
  <workflow-execution  href="https://ehc3-vco2.ehc.ssev.local:8281/vco/api/workflows/fe59b484-ec21-4028-8a32-5e434b4139c2/executions/ff8080814e0272b6014eadc7c37424fb/">
  <relations>
  <link href="https://ehc3-vco2.ehc.ssev.local:8281/vco/api/workflows/fe59b484-ec21-4028-8a32-5e434b4139c2/executions/" rel="up"/>
  <link href="https://ehc3-vco2.ehc.ssev.local:8281/vco/api/workflows/fe59b484-ec21-4028-8a32-5e434b4139c2/executions/ff8080814e0272b6014eadc7c37424fb/" rel="remove"/>
  <link href="https://ehc3-vco2.ehc.ssev.local:8281/vco/api/workflows/fe59b484-ec21-4028-8a32-5e434b4139c2/executions/ff8080814e0272b6014eadc7c37424fb/logs/" rel="logs"/>
  <link href="https://ehc3-vco2.ehc.ssev.local:8281/vco/api/workflows/fe59b484-ec21-4028-8a32-5e434b4139c2/executions/ff8080814e0272b6014eadc7c37424fb/state/" rel="state"/></relations>
  <id>ff8080814e0272b6014eadc7c37424fb</id>
  <state>failed</state>
  <input-parameters>
  <parameter type="string" name="vmName" scope="local">
  <string>vm093</string></parameter>
  <parameter type="SecureString" name="vmPassword" scope="local"/></input-parameters>
  <output-parameters/>
  <start-date>2015-07-20T19:23:46.932-04:00</start-date>
  <end-date>2015-07-20T19:23:48.070-04:00</end-date>
  <started-by>[email protected]</started-by>
  <name>Add Agent</name>
  <content-exception>; nested exception is:
          java.io.IOException: java.io.IOException: Non nillable element 'password' is null. (Dynamic Script Module name : addAgent#32)</content-exception>
  <current-item-display-name>Add Agent</current-item-display-name></workflow-execution>
  
  

  Anyone seen elsewhere and - especially - able to fix it? :-)

  Thank you

  Ed

  It turns out that, in the XML input, which is passed to the server vCO, the password parameter type spec can be , but the definition of its value must be specified using ....

  For example:

                  
                          secret
                  
  

  Lesson learned...

  Ed

• Unable to access the parameter input in DoClick layer

  Hello

  In the plugin, I develop, I'm trying to get a patch model where I click (of approximately 20 x 20 pixels), so I need to access the pixels in the DoClick function. This function is called when the user clicks on the layer. In this function, for some reason, I can't access any information of my input layer (params [SUPER_INPUT]-> u.ld), either the width or pixels. When I try and view the width and height, for example, everything I get is zero.

  Anyone know why?

  Thank you

  K.

  PS: I use After Effects CS5 SDK.

  Yo.

  the answer is simple and sad at the same time...

  your plugin incoming image is only returned when calling render.

  However! There are several workaround solutions.

  1. you can keep your pixels input (or output) on the call made in the sequence data.

  benefits:

  You can access anywhere, anytime.

  disadvantages:

  If the user returns to a caching framework, you will not get a call from rendering, and therefore your stored data will not the right time.

  resumes the ram. (not too much a problem today)

  2. take the source of the layer using RenderReceiptWorld().

  You can make AE will pick up the pixels in a video clip in the project at any time, from anywhere, anytime.

  benefits:

  You can get the correct image when you need it.

  disadvantages:

  If the layer of that your plug-in is applied a model, making it may take time. a lot of time in some cases. which could affect the responsiveness of the user interface.

  3. return to the time of cs4, you might have benefited from the mechanism design user interface.

  during the event "draw", allows you to get the comp (or layer) window buffer to take advantage. you could have it used to read the displayed picture.

  Since cs5, drawbot has been implemented.

  I don't see any function that allows to read the data from the 'surface', but may have missed it just me. It is interesting to look into.

  benefits:

  the data is there. Just choose it.

  the user can see the layer because it is in the comp - post effects and transformations.

  disadvantages:

  of course, not be applicable on cs5 and higher.

  4. operate your changes during the call to render.

  It is the best way in my opinion.

  during the 'click' event, store your data (for example, click on location) in the sequence with a flag set data and call a new rendering.

  When calling "render", check if the indicator is checked. If so, read the relevant pixels and operate.

  benefits:

  the less destructive, render-and-ram-wise.

  the least way prone mistake relying on irrelevant frames of the cache.

  disadvantages:

  breaking the flow of your code, and depending on the action, can alter the interactive UI speed, as each iteration requires a new rendering.

  That's all I can think about right now.

  If none of the suites above you, then I need to learn more about the process you do to find a better solution.

  :-)

• event ID 4374 impossible to restart the services

  I have an error in Event Viewer that says that this program "microsoft-windows-uiribbon-packaage-mui-package-sr-latn-cs-mini lp" is not applicable to this system and one of your previous expected answers said to try and restart RPC/Dcom and TCP/IP Driver and network store interface, then if they start to restart the network location awareness program.  I tried to restart these 3 programs and I couldn't restart one. It is event ID 4374. I can't get rid of this program and it is initially constant blinking on the computer. can you please send me a simple way to get rid of this program, as I am not computer savvy.

  tank you

  Linda

  Hello

  I suggest to go through the steps and check.

  Method 1:

  This event id 4374 is saved when she offered an update that is not applicable to your computer or when you try to install it.

  Check the link for more information.

  
  http://TechNet.Microsoft.com/en-us/library/cc756248 (v = WS.10) .aspx

  http://TechNet.Microsoft.com/en-us/library/cc756288 (v = WS.10) .aspx

  Method 2:

  
  

  Perform a clean boot and see if the problem is resolved. Check out the link.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: Once the diagnosis is made, follow step 7 of the article so that the computer can be configured to start in Normal startup.