Evo 310

My evo 310dt worked well, until I had to unplug the power cord and monitor lead. After replacing them, it changes, then on again automatically, then fact several beeps sounds. Nothing shows up on the screen.

Can anyone help.

Hello

You can control how much emits a beep and the combination of beeps that your machine is, the answer to the problem is in the code of beeps.  Mail me your results

Checkurtech

Tags: HP Desktops

Similar Questions

  • What may have caused the following kernel panic? macOS Sierra, Samsung EVO 850, TRIM enabled.

    Panic report *.

    panic (cpu 4 0xffffff800e409f4a appellant): Kernel trap at 0xffffff7f90bcd81b, type 14 = page fault, registers:

    CR0: 0 X 0000000080010033, CR2: 0 X 0000000000000000, CR3: 0X000000023AEAA3B8 CR4: 0X00000000001626E0

    RAX: 0 X 0000000000000000, RBX: 0XFFFFFF80416D6C00 RCX: 0 X 0000000000000000, RDX: 0 X 0000000000000001

    RER: 0XFFFFFF91F88F3A60, RBP: 0XFFFFFF91F88F3A90, IHR: 0 X 0000000000000003, RDI: 0XFFFFFF804A4E1080

    R8: 0X000000000000FFFF, R9: 0 X 0000000000000001, R10: 0 X 0000000000000000, R11: 0XFFFFFF91F88F3788

    R12: 0XFFFFFF804F701608, R13: 0X00000000E00002BD, R14: 0XFFFFFF804F701618 R15: 0XFFFFFF804F701610

    RFL: 0 X 0000000000010246, RIP: 0XFFFFFF7F90BCD81B, CS: 0000000000000008, SS 0 X: 0 X 0000000000000010

    CR2 error: 0 x 0000000000000000, error code: 0 x 0000000000000002, CPU error: 0 x 4, PL: 0

    Backtrace (4 CPU), Frame: Return address

    0xffffff91f88f36f0: 0xffffff800e2f748c

    0xffffff91f88f3770: 0xffffff800e409f4a

    0xffffff91f88f3950: 0xffffff800e2a9743

    0xffffff91f88f3970: 0xffffff7f90bcd81b

    0xffffff91f88f3a90: 0xffffff7f90bcf3df

    0xffffff91f88f3ac0: 0xffffff800e8e7b3e

    0xffffff91f88f3b20: 0xffffff800e8e5d48

    0xffffff91f88f3b80: 0xffffff800e8eed31

    0xffffff91f88f3cc0: 0xffffff800e3c9968

    0xffffff91f88f3dd0: 0xffffff800e2fc23c

    0xffffff91f88f3e30: 0xffffff800e2d9b51

    0xffffff91f88f3e80: 0xffffff800e2ed6e7

    0xffffff91f88f3f10: 0xffffff800e3f600e

    0xffffff91f88f3fb0: 0xffffff800e2a9f66

    Extensions of core in backtrace:

    com.apple.iokit.IOAcceleratorFamily2 (288.13) [27E0AFCE-E36A-35F5-A008-BB1EB3A2C7 B9]@0xffffff7f90bb3000-> 0xffffff7f90c43fff]

    dependency: com.apple.iokit.IOPCIFamily (2.9) [731443D8-78D5-30C8-939A-1ED3E857CA22] @ 7f8eb32000 0xffffff

    dependency: com.apple.iokit.IOGraphicsFamily (2.4.1) [377FAA09-C02F-3FF4-A5DE-C0F2E711C8B0] @0 xffffff7f8f028000

    The process corresponding to the current thread BSD name: com.apple.WebKit

    Mac OS version:

    A 16, 323

    Kernel version:

    16.0.0 Darwin kernel version: Mon Aug 29 17:56:20 PDT 2016; root:XNU-3789.1.32~3/RELEASE_X86_64

    Kernel UUID: 622D2470-C34D-31F9-A62B-6AA9A3C6A3CD

    Slide kernel: 0x000000000e000000

    Text of core base: 0xffffff800e200000

    Text __HIB base: 0xffffff800e100000

    Name of system model: MacBookPro9, 1 (Mac-4B7AC7E43945597E)

    Availability of the system in nanoseconds: 32437803249199

    last load kext to 22903650978560: com.apple.driver.AppleUSBMergeNub 900.4.1 (addr 0xffffff7f919a4000 size 12288)

    Finally unloaded kext to 24109191382834: com.apple.driver.usb.cdc 5.0.0 (addr 0xffffff7f91999000 size 28672)

    kexts responsible:

    org.virtualbox.kext.VBoxNetAdp 5.0.14

    org.virtualbox.kext.VBoxNetFlt 5.0.14

    org.virtualbox.kext.VBoxUSB 5.0.14

    org.virtualbox.kext.VBoxDrv 5.0.14

    com.globaldelight.driver.BoomDevice 1.4

    com.apple.driver.AppleHWSensor 1.9.5d0

    com.apple.driver.AGPM 110.23.7

    com.apple.driver.X86PlatformShim 1.0.0

    com Apple.filesystems.autofs 3.0

    com.apple.driver.AppleMikeyHIDDriver 127

    com.apple.driver.AppleOSXWatchdog 1

    com.apple.driver.AppleMikeyDriver 276.26

    com.apple.driver.AudioAUUC 1.70

    com.apple.driver.AppleHDA 276.26

    com Apple.Driver.pmtelemetry 1

    com.apple.driver.AppleUpstreamUserClient 3.6.4

    com.apple.iokit.IOUserEthernet 1.0.1

    com.apple.GeForce 10.1.2

    com.apple.iokit.IOBluetoothSerialManager 5.0.0f18

    com.apple.driver.AppleIntelHD4000Graphics 10.1.8

    com.apple.Dont_Steal_Mac_OS_X 7.0.0

    com.apple.driver.AppleHV 1

    com.apple.driver.AppleSMCPDRC 1.0.0

    com.apple.driver.AppleMCCSControl 1.2.13

    com.apple.driver.SMCMotionSensor 3.0.4d1

    com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 5.0.0f18

    com.apple.driver.AppleLPC 3.1

    com.apple.driver.AppleSMCLMU 208

    com.apple.driver.AppleMuxControl 3.13.60

    com.apple.driver.AppleIntelFramebufferCapri 10.1.8

    com.apple.driver.AppleIntelSlowAdaptiveClocking 4.0.0

    com.apple.driver.AppleThunderboltIP 3.0.8

    com.apple.driver.AppleIRController 338

    com.apple.driver.AppleUSBTCButtons 251

    com.apple.driver.AppleUSBTCKeyboard 251

    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1

    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0

    com.apple.BootCache 39

    com Apple.filesystems.HFS.kext 366.1.1

    com.apple.iokit.SCSITaskUserClient 394

    com.apple.iokit.IOAHCIBlockStorage 295.1.1

    10.2.6 com.apple.iokit.AppleBCM5701Ethernet

    com.apple.driver.AppleSDXC 1.7.6

    com.apple.driver.AirPort.Brcm4360 1100.37.1a16

    com.apple.driver.AppleFWOHCI 5.5.5

    com.apple.driver.AppleAHCIPort 326

    com.apple.driver.AppleSmartBatteryManager 161.0.0

    com.apple.driver.AppleACPIButtons 5.0

    com.apple.driver.AppleRTC 2.0

    com.apple.driver.AppleHPET 1.8

    com.apple.driver.AppleSMBIOS 2.1

    com.apple.driver.AppleACPIEC 5.0

    com.apple.driver.AppleAPIC 1.7

    com.apple.driver.AppleIntelCPUPowerManagementClient 219.0.0

    com Apple.NKE.applicationfirewall 171

    com Apple.Security.Quarantine 3

    com.apple.security.TMSafetyNet 8

    com.apple.driver.AppleIntelCPUPowerManagement 219.0.0

    com.apple.iokit.IOUSBUserClient 900.4.1

    com Apple.kext.Triggers 1.0

    com.apple.driver.DspFuncLib 276.26

    com.apple.kext.OSvKernDSPLib 525

    com.apple.nvidia.driver.NVDAGK100Hal 10.1.2

    com.apple.nvidia.driver.NVDAResman 10.1.2

    com.apple.iokit.IOSerialFamily 11

    com.apple.iokit.IOSurface 152

    2.2.7 com.apple.iokit.IOFireWireIP

    com.apple.driver.AppleSMBusController 1.0.14d1

    com.apple.driver.AppleHDAController 276.26

    com.apple.iokit.IOHDAFamily 276.26

    com.apple.iokit.IOAudioFamily 205.11

    com.apple.vecLib.kext 1.2.0

    com.apple.iokit.IOBluetoothHostControllerUSBTransport 5.0.0f18

    com.apple.iokit.IOBluetoothHostControllerTransport 5.0.0f18

    com.apple.iokit.IOBluetoothFamily 5.0.0f18

    com.apple.driver.AppleSMBusPCI 1.0.14d1

    com.apple.driver.AppleBacklightExpert 1.1.0

    com.apple.iokit.IONDRVSupport 2.4.1

    com.apple.driver.AppleGraphicsControl 3.13.60

    com.apple.driver.X86PlatformPlugin 1.0.0

    com.apple.driver.AppleSMC 3.1.9

    com.apple.driver.IOPlatformPluginFamily 6.0.0d8

    com.apple.iokit.IOAcceleratorFamily2 288.13

    com.apple.AppleGraphicsDeviceControl 3.13.60

    com.apple.iokit.IOGraphicsFamily 2.4.1

    com.apple.iokit.IOSlowAdaptiveClockingFamily 1.0.0

    com.apple.driver.AppleUSBMultitouch 258

    com.apple.driver.usb.IOUSBHostHIDDevice 1.1

    com.Apple.Driver.USB.Networking 5.0.0

    com.apple.driver.usb.AppleUSBHostCompositeDevice 1.1

    com.apple.driver.usb.AppleUSBHub 1.1

    com.apple.driver.CoreStorage 540

    com Apple.filesystems.HFS.Encodings.kext 1

    com.apple.iokit.IOSCSIMultimediaCommandsDevice 394

    com.apple.iokit.IOBDStorageFamily 1.8

    com.apple.iokit.IODVDStorageFamily 1.8

    com.apple.iokit.IOCDStorageFamily 1.8

    com.apple.driver.AppleThunderboltDPInAdapter 4.5.3

    com.apple.driver.AppleThunderboltDPAdapterFamily 4.5.3

    com.apple.driver.AppleThunderboltPCIDownAdapter 2.0.3

    com.apple.iokit.IOAHCISerialATAPI 266

    com.apple.iokit.IOSCSIArchitectureModelFamily 394

    com.apple.driver.AppleThunderboltNHI 4.1.3

    com.apple.iokit.IOThunderboltFamily 6.2.1

    com.apple.iokit.IOEthernetAVBController 1.0.3b4

    com.apple.iokit.IO80211Family 1200.12.2

    com.apple.driver.mDNSOffloadUserClient 1.0.1b8

    com.apple.iokit.IONetworkingFamily 3.2

    com Apple.Driver.corecapture 1.0.4

    com.apple.iokit.IOFireWireFamily 4.6.4

    com.apple.iokit.IOAHCIFamily 288

    com.apple.driver.usb.AppleUSBEHCIPCI 1.1

    com.apple.driver.usb.AppleUSBEHCI 1.1

    com.apple.driver.usb.AppleUSBXHCIPCI 1.1

    com.apple.driver.usb.AppleUSBXHCI 1.1

    com.apple.driver.usb.AppleUSBHostPacketFilter 1.0

    com.apple.iokit.IOUSBFamily 900.4.1

    com.apple.iokit.IOUSBHostFamily 1.1

    com.apple.driver.AppleUSBHostMergeProperties 1.1

    com.apple.driver.AppleEFINVRAM 2.1

    com.apple.driver.AppleBusPowerController 1.0

    com.apple.iokit.IOHIDFamily 2.0.0

    com.apple.driver.AppleEFIRuntime 2.0

    com.apple.iokit.IOSMBusFamily 1.1

    com Apple.Security.sandbox 300.0

    com.apple.kext.AppleMatch 1.0.0d1

    com.apple.driver.AppleKeyStore 2

    com.apple.driver.AppleMobileFileIntegrity 1.0.5

    com.apple.driver.AppleCredentialManager 1.0

    com.apple.driver.DiskImages 444

    com.apple.iokit.IOStorageFamily 2.1

    com.apple.iokit.IOReportFamily 31

    com.apple.driver.AppleFDEKeyStore 28.30

    com.apple.driver.AppleACPIPlatform 5.0

    com.apple.iokit.IOPCIFamily 2.9

    com.apple.iokit.IOACPIFamily 1.4

    com Apple.KEC.pthread 1

    com Apple.KEC.corecrypto 1.0

    com.apple.kec.Libm 1

    System profile:

    Airport: spairport_wireless_card_type_airport_extreme (0x14E4, 0xF5), Broadcom BCM43xx 1.0 (7.21.171.10.1a16)

    Bluetooth: Version 5.0.0f18, 3 services, 27 aircraft, 1 incoming serial ports

    Bus crush: MacBook Pro, Apple Inc., 25.1

    Memory module: BANK 0/DIMM0, 8 GB, DDR3, 1333 MHz, 0x014F, 0x4A4D313333334B53482D3847202020202020

    Memory module: BANK 1/DIMM0, 8 GB, DDR3, 1333 MHz, 0x014F, 0x4A4D313333334B53482D3847202020202020

    USB device: USB 2.0 Bus

    USB device: Hub

    USB device: FaceTime HD camera (built-in)

    USB device: USB 2.0 Bus

    USB device: Hub

    USB device: Hub

    USB device: Apple keyboard / Trackpad

    USB Device: IR receiver

    USB device: Hub BRCM20702

    USB Device: USB Bluetooth host controller

    USB device: USB 3.0 Bus

    USB device: BUP BK

    USB device: iPhone

    Serial ATA Device: Samsung 850 EVO 1 TB, 1 TB SSD

    Serial ATA Device: HL-DT-ST DVD - RW GS31N

    Model: MacBookPro9, 1, MBP91.00D3.B0D of BootROM, 4 processors, Intel Core i7, 2.6 GHz, 16 GB, MSC 2.1f175

    Network service: Airport, AirPort, en1

    Graphics card: Intel Graphics HD 4000, 4000, Intel HD graphics card integrated

    Graphics card: NVIDIA GeForce GT 650 M, NVIDIA GeForce GT 650 M, PCIe, 1024 MB

    org.virtualbox.kext.VBoxNetAdp 5.0.14

    org.virtualbox.kext.VBoxNetFlt 5.0.14

    org.virtualbox.kext.VBoxUSB 5.0.14

    org.virtualbox.kext.VBoxDrv 5.0.14

    com.globaldelight.driver.BoomDevice 1.4

    One of them are the most likely candidate.

  • LCD and wifi fix... $ 310.  What does that mean again?

    Apple has my MBP 2012 to replace the logic board.  I received an email saying they fix the video problem but they want $310 to repair my wifi and a problem with my LCD.  I had no other problems with my laptop except those relating directly to the logic board.  Can someone explain what problems I have noticed with the wifi and LCD?  I was without my laptop for a while so I was happy to finally it gives back, and instead received an email saying more things broke.

    Wifi antennas are on display and cables through the hinges - an area of high wear and failure.

    Probably they did you a favor to be at the top of this.

  • I get error message 310 install Messenger on iPhone 6 sec more

    Reinstalled Messenger for iPhone 6s more OS 9.3.2.  While setting up and logging in the 310 error message keeps coming back!

    Hey cherzart!

    I understand that you get a 310 error message when you try to log in and activate iMessage on your iPhone. I use iMessage all the time and would want to be able to activate also, so let's take a look and see what is causing the problem.

    When it comes to error with iMessage messages and it want do not allow to connect you, the steps are in this article:

    If you get an error when you try to activate FaceTime or iMessage

    See you soon!

  • Samsung Evo 850 and mid 2012 MBP

    I tried every way to get this macbook to boot from that disk of 250 GB samsung evo 850. He sees it as a disk, but cannot boot from it, can't take it apart during the partitioning, etc. I can connect via an external USB SATA connector, format, install 10.8 or Yosemite and it works perfectly, but when I move the drive to the HD connector internal and try to start it, I get a circle with a line through it. He sees the player when I hold down the option, but cannot boot from it.

    Is this a configuration unsupported or I do something wrong? I need to find a 840, which seems to have specific firmware mac and use it? I ran all the updates that are available via the USB SATA connector. I thought it was an update needed at first, but none was available.

    Any guidance is appreciated.

    Replace the internal connecting cable, SATA cable

  • connection with a 1 TB Samsung 850 EVO SSD HD problems

    I recently bought 4 Samsung 850 EVO 1 TB SSDS that are recommended by Convergent design to be used with an Odyssey 7 q + VCR. In order to get the images on the timeline of Final Cut, I put on a SATA Adapter USB 3 SSD drives (mine is powered) and use software, once the disc appears on the Finder. Problem is that none of these Samsung 850 EVO appear on the finder. I checked my SATA USB adapter by plugging another brand of SSD drive. It works perfectly.

    Could someone help me with this issue? With a price of around $450, I don't really want these SSD drives to put useless due to a problem of Apple...

    I even tried to force allow the filling with this command: 'sudo trimforce enable', not work.

  • Samsung 850 EVO Solid State Drive works only with the MacBook Pro - Solution?

    I recently bought a Samsung 850 EVO 500 GB Solid State Drive for mid 2012 MacBook Pro father. The computer was working properly, but it was just very slow. I took the old drive and installed the SSD. I took it to an Apple store so that they could install the OS. A guy at the Genius Bar met with me and first tried to install the OS via the Ethernet cable. It is impossible to install some general error. He then tried to install it on a disc. Which also failed. He said he was not familiar with the type of error that he saw. But he said it was a mistake 'bad '. He said he saw the SSD for my SATA cable worked. He concluded that the reader must be defective. I explained how it is virtually impossible because they have a rate of close to zero. He said: "well they are produced en masse" and explained how they could install a hard drive themselves for some too expensive price. A bit annoying.

    In any case, I took the SSD back to my house and threw it in my desktop PC. It works very well. Then what should I do? Why am I not able to get the SSD to install it? From what I read, the Samsung 850 EVO should be compatible with a MacBook Pro 2012. Can I do to install it at home? Is that all I can say people at the Mac store to help them along?

    Most likely, the drive is formatted for use with Windows computers. First step would be to format correctly for Macs.

    This is Mac OS extended (journaled) with a GUID partition map.

    OS X will only be installed on a properly formatted disk.

    HTH

    Leo

  • Slow down the Evo 850 Samsung SSD

    Recently, I had a new SSD Samsung 850 EVO and installed on my macbook pro 2009. Using OSX El Capitan.

    But the reading and writing speeds I get are:

    Address: 209 MB/s

    Read: 264 MB/s

    and I should get about 450 MB for read and write at least. I went through to change the start-up as well as trimming startup disk, but did not help much.

    No idea how I can fix this problem? Thank you.

    Mbps 2009 have SATA2 connectivity.  You will not be able to experience the full capacity of the Samsung SSD.  You would need a MBP 2011 or newer to realize the full potential of this SSD. (This is when SATA3 connectivity was introduced).

    Ciao.

  • Canon MX 310 connected but do not print and shows not connected

    updated iMac os x el capitan (10.11.4) and now impossible to print with Canon pixma MX 310 - get the message not connected while it appears in my dock and shows point to print failed.  The error log is full of messages and doesn't help me at all.

    How can I get my Canon printer/scanner is working again.

    Unfortunately, Canon did not write all the drivers for v10.11 compatibility El Capitan. See here.

    But what you can do is to try a reset. Make sure that the printer is turned on.

    Open System Preferences > Printers and Scanners and select the print tab.

    Right click or control your printer on the left, then click on: reset the printing system

    When she did try printing.

  • HP TOUCHSMART 310: THE APPROPRIATE ADAPTER

    I KNOW YOU HAVE BEEN ASKED THIS MORE than ONCE BELIVE ME I LU ALL I hope THAT MY VERSION OF it will not MAKE YOU cringe LONG STORY SHORT HP TOUCHSMART 310 / NO VIDEO /HDMI T.V/YADDA BLAH ADAPTER got IT BUT WHICH would you recommend I nai no IDEA Please HELP ONE OLD BROAD OUT AND ME SAY WHAT you YOU WOULD & if POSSIBLE ONE THAT IS AFFORDABLE SORRY FOR ALL THE PROBLEMS of VISION of CAPS IMPOSSIBLE FINDING OF SUNGLASSES THANKS PEACE

    Hi there @TWISTEDT,

    That the Forums are with you!  I understand that you are looking for help for the video connections on your all-in-one computer.  I'm happy to help you with this.

    Please report the number of complete product for your computer. Check out the following, if you need assistance with this information.  HP desktop PC - how can I find my model number, serial number or product?  Once I have that I can check the specifications and that the system has in terms of hardware.  However if the computer does not have the external graphics port or HDMI connections, your only option would be to look at an external USB graphic adapter cable. The type you want to watch as much would depend on what the external display takes as inputs.

    Please let me know when you can.

  • Compaq Evo D300: Multimedia Audio controller drivers/Codecs

    Compaq IT support/Codec.

    Dear community of Compaq.

    I was informed by the Intel online community to contact Compaq for Codecs that are not themselves. Can you please help me by providing the necessary driver/Codec below?

    The Intel answer/advice for me and my original question which is lower. Thank you very much.
    Mr. Bennett

    Intel community advice

    "The device that you identified is the Intel high definition Audio interface. The driver you need really need is not for the interface itself, but for the media Codec that completes the circuit. Intel cannot help you with that. they do not have these Codecs. You must contact the Board vendor for the correct driver. »

    My original Question from Intel

    "Dear community.
    Can someone help me find a driver "Multimedia Audio Controller" for the "Compaq Evo D300" PC?
    Exact model: http://h20564.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=92161 & lang = to & cc = us
    "077Ch" is the main map.
    Company and feature:
    VEN 8086
    DEV 2445
    I've upgraded to Windows 7 from XP but I think that Intel don't do drivers more for this PC.
    I would be very grateful for help.
    Thank you.

    Mr. Bennett"

    Thank you.

    Mr O Bennett

    You are the very welcome.

    I mean, it is explore you the file and select with the mouse, then click Next and it should install the driver

    You cannot copy and paste anything.

    You can first try this method easier to install the driver...

    When you arrive at her browse my computer for driver software option, go to: C:\SWSetup\sp27103, make sure that the include subfolders is selected and see if the pilot goes like this.

    The original file that I gave my instructions has the hardware ID you posted, so you need to install the driver (8086-2445)

    [AnalogDevices]
    % * WDM_AC97AUD. DeviceDesc % = WDM_ICHAUD, PCI VEN_8086 & dev_2445 & subsys_00070E11
    % * WDM_AC97AUD. DeviceDesc % = WDM_ICHAUD, PCI VEN_8086 & dev_2445 & subsys_00080E11
    % * WDM_AC97AUD. DeviceDesc % = WDM_ICHAUD, PCI VEN_8086 & dev_2445 & subsys_00090E11
    % * WDM_AC97AUD. DeviceDesc % = WDM_ICHAUD, PCI VEN_8086 & dev_2445 & subsys_000B0E11
    % * WDM_AC97AUD. DeviceDesc % = WDM_ICHAUD, PCI VEN_8086 & dev_2445 & subsys_000C0E11
    % * WDM_AC97AUD. DeviceDesc % = WDM_ICHAUD, PCI VEN_8086 & dev_2445 & subsys_000D0E11
    % * WDM_AC97AUD. DeviceDesc % = WDM_ICHAUD, PCI VEN_8086 & dev_2445 & subsys_000E0E11
    % * WDM_AC97AUD. DeviceDesc % = WDM_ICHAUD, PCI VEN_8086 & dev_2445 & subsys_000F0E11
    % * WDM_AC97AUD. DeviceDesc % = WDM_ICHAUD, PCI VEN_8086 & dev_2445 & subsys_00100E11
    % * WDM_AC97AUD. DeviceDesc % = WDM_ICHAUD, PCI VEN_8086 & dev_2445 & subsys_00880E11
    % * WDM_AC97AUD. DeviceDesc % = WDM_ICHAUD, PCI VEN_8086 & dev_2445 & subsys_00890E11
    % * WDM_AC97AUD. DeviceDesc % = WDM_ICHAUD, PCI VEN_8086 & dev_2445 & subsys_008B0E11
    % * WDM_AC97AUD. DeviceDesc % = WDM_ICHAUD, PCI VEN_8086 & dev_2445 & subsys_008C0E11
    % * WDM_AC97AUD. DeviceDesc % = WDM_ICHAUD, PCI VEN_8086 & dev_2445 & subsys_008D0E11
    % * WDM_AC97AUD. DeviceDesc % = WDM_ICHAUD, PCI VEN_8086 & dev_2445 & subsys_00A50E11
    % * WDM_AC97AUD. DeviceDesc % = WDM_ICHAUD, PCI VEN_8086 & dev_2445 & subsys_00A60E11
    % * WDM_AC97AUD. DeviceDesc % = WDM_ICHAUD, PCI VEN_8086 & dev_2445 & subsys_00A70E11
    % * WDM_AC97AUD. DeviceDesc % = WDM_SPINNA, PCI VEN_8086 & dev_2445 & subsys_000A0E11
    % * WDM_AC97AUD. DeviceDesc % = WDM_SPIDER, PCI VEN_8086 & dev_2445 & subsys_008A0E11
    % * WDM_AC97AUD. DeviceDesc % = WDM_ICHAUDH, PCI VEN_8086 & dev_2445 & subsys_124C103C
    % * WDM_AC97AUD. DeviceDesc % = WDM_ICHAUDH, PCI VEN_8086 & dev_2445 & subsys_80101043
    % * WDM_AC97AUD. DeviceDesc % = WDM_ICHAUDH, PCI VEN_8086 & dev_2445 & subsys_890D1509
    % * WDM_AC97AUD. DeviceDesc % = WDM_ICH_H, PCI VEN_8086 & dev_2445 & subsys_1274103C
    % * WDM_AC97AUD. DeviceDesc % = WDM_HGUAD, PCI VEN_8086 & dev_2445 & subsys_126E103C
    % * WDM_AC97AUD. DeviceDesc % = WDM_HGUAD, PCI VEN_8086 & dev_2445 & subsys_126F103C
    % * WDM_AC97AUD. DeviceDesc % = WDM_HGUAD, PCI VEN_8086 & dev_2445 & subsys_1279103C
    % * WDM_AC97AUD. DeviceDesc % = WDM_HGUAD, PCI VEN_8086 & dev_2445 & subsys_127A103C
    % * WDM_AC97AUD. DeviceDesc % = WDM_AMAZON, PCI VEN_8086 & dev_2445 & subsys_806A1043
    % * WDM_AC97AUD. DeviceDesc % = WDM_DUBLIN, PCI VEN_8086 & dev_2445 & subsys_3084109F
    % * WDM_AC97AUD. DeviceDesc % = WDM_DUBLIN, PCI VEN_8086 & dev_2445 & subsys_3181109F
    % * WDM_AC97AUD. DeviceDesc % = WDM_DUBLIN, PCI VEN_8086 & dev_2445 & subsys_80761043

  • TouchSmart 310 PC shut down

    My Touchsmart 310 computer keeps closing down again, every time I have a film/video or play a game. I noticed that on the back of the monitor (where the cpu is) becomes very hot when I watch videos or play games, and then will follow the closing.

    I tried to clean it, tried it cools by placing an electric fan behind it, but nothing works. What I have to put anything inside of the it - software or any "cooler special" so I can watch videos or play games without that it stops?

    Help, please.

    Thank you. My PC is fixed (I hope that is not temporary). I didn't remove the back cover of the PC and clean some built dust on the fan, and voila, it's not stop more. As I said, I hope that this is not a temporary solution.

    Thanks for the interest, I appreciate it.

  • Cable required to replace the 128 GB SSD with a 500 GB Samsung Sata SSD 600 Evo 850?

    Hello

    I have a Tecra Z50-A-169.

    Do I need a different cable to replace the existing Toshiba 128 GB SSD with a 850 Samsung 500 GB sata SSD 600 EVO?

    V/R

    jvdw

    Nevermind, I found it already.
    The current SSD is located in mSATA and I can directly replace it with a Samsung 850 EVO 500 mSATA

    V/R
    jvdw

  • Boot from the DVD drive on a compaq evo N610C

    Hello everyone, I try to start my computer from the CD/DVD with success.

    I use a win98 boot CD, is this OK? Or do I need another type of boot cd?

    I checked the CD on other computers, and there it works fine.

    Hoping for help

    P.S. This thread was moved from the business PCs - Compaq, Elite, Pro for PC - portable Omnibooks, EVO. -Forum moderator hp

    WL37 wrote:

    It's one of the problems, the bios, the parameter does not have the ability to boot from the CD/DVD.

    There are only three choices:

    start from laptop, multibay

    boot from the hard drive to laptop or computer ethernet startup.

    I also have uppdated the bios, but nothing changes.

    'Notebook multibay shoes' should work - the CD is installed in the multi-baies slot.

  • WT-310 - need to slip /sleeve case recommendations

    When I bought the WT310-106, I picked up the Toshiba brand for her case as well.
    Unfortunately, then the box seems good and it is well done, the design is poor.

    It does not correctly, wise there is an inch and a half high margin too large to be moved. The sides have only a few inches of elastic in half top, if the lower half of each side is open.

    This means that the lower corners of the Tablet are not properly protected and the tablet can turn in the case. Therefore the lower corners of the case are crushed by now. The other problem is that put a pen in the provided loop push the Tablet askew. Very poor design.

    Recently, I jumped in PC World to see what they had and was surprised by how little computer case laptop 11.6 "fit the 310 (one!).

    If anyone has a recommendation for a Holster that fits the WT310, maintains computer in place, protects the corners, a hard protection to the screen and soft protection to shock as well as a Pocket/loop/space for a pen?

    It will be transported in a Messenger bag with other junk needs to be quite robust but is not waterproof, I use it at work so no Ganja leaves etc.

    Cheers Chaps

    Hello

    the round of Toshiba measures 1.6 x 22.6 x 20.7 cm and its been for 11.8 as well as 11.6 displays.
    I guess an3rd bias for screens of 11.6 sleeve should be compatible with the TOSHIBA Tablet too.

    So I recommend you seek 11.6 sleeve: for example, I found good Internet offer: sleeve leather Supremery

Maybe you are looking for

  • iMessage suddenly decides to stop working

    iMessage works fine on my iPhone 6 and iPad, but all of a sudden on my Mac, it will not be activated. It worked fine on the Mac until 15:00 yesterday. At home, opened my Mac and it suddenly stopped working with FaceTime. I keep trying to enter my cre

  • Only Finland fixed subscription

    Sorry to bother everyone again... I had no luck with my inquiry before so thought I will try again. Where are all the fixed phones only subscriptions in Finland has disappeared? Now everything is mobile and fixed, more expensive, and I need only land

  • Need new playlist

    A factory reset computer to return to Windows 8.1 Windows 10.  I've got Carbonite files are restored, however, I had to download the latest version of i-tunes and my library is back but NOT my playlist.  Looking several messages, I tried the SHIFT ke

  • Equium M50-192: where to find a driver for DVD/CD player

    Hi, can someone please tell me the site for the latest driver for my CD/DVD drive because none is listed in the driver update page, thank you.

  • My iCloud has been hacked... locks... ransom sought to unlock the PIN

    I was watching a great show on my iPad when it went all of a sudden in the mode lock with the message: *** Lost IPad Your device is locked.  To unlock email ********* *** My iPhone also presented the same message at the same time. But a few seconds l