Example of screen remote control

Similar Questions

• Apple TV signals Siri remote control as support when it is disconnected from the charger

  I just finished my Siri to load remote - it was down to about 50%, so I loaded for about 6 hours with my iPhone 6s charger.

  I now have it unplugged from the charger, but the Apple TV still shows the State remotely like loading when it obviously isn't.

  I tried to reset and re-twinning of the remote with Apple TV, but the State has not changed. Is there a way to fix this, or does take some time to update (maybe needs battery to drain a bit with use)?

  I have corrected this now.

  There seems to be two conditions for State of charge reliably updated when you have finished filling and want to disconnect-

  (1) make sure that you are on the Bluetooth - screen remote controls and devices with the battery icon on Apple TV

  (2) make sure that your charger is turned on when you unplug the connector of the remote control lightning

  I found that if the charger is turned off before I log out (which is something I usually do think its safer), the icon is not always up to date.

• I have two Apple TV. The remote control that interferes with the other. For example, if I press stop on the distance she also those other programs. How to do this?

  I have two Apple TV. The action on each distance affects the other tv. For example if I press stop on the remote control will stop the program on the other tv to. How can I stop this from happening?

  Easy.  You must associate each ATV with one of the remotes.  Each ATV is not paired and will 'listen' to any distance.

  The trick is to cover before the other ATV when matching so the two do not listen.

  Silver or white remote control: pair or cancel the twinning of the Apple Remote with Apple TV (3rd generation or earlier)-Apple Support

  Siri remote control: http://help.apple.com/appletv/#/atvbc9953e63

  Don't know what models you have the ATV, but the whole process is the same:

  1. choose a remote control and an ATV.  Cover the front of the another ATV.

  2. hold the remote control in 3 inch they recommend, pair it with appropriate above process.

  3. choose the other remote, unlock the first ATV and block that you just paired.

  4. hold the second remote control 3 inches from the second ATV and pair it with appropriate above process.

  5. release the first ATV and enjoy.

• Computer laptop screen goes black when the VGA cable is connected, but you press TV poster display correctly when the VGA button on the remote control.

  Computer laptop screen goes black when the VGA cable is connected, but you press TV poster display correctly when the VGA button on the remote control.   I need the laptop screen too.  It started just after years of correct use.

  Original title: VGA:

  In Panel > all items in the control panel > display > screen resolution you should be able to see the two devices / displays and be able to set options...

  http://Windows.Microsoft.com/en-us/Windows7/change-your-screen-resolution

• Using the remote control in parallel and touch screen.

  Hello.

  Cisco TelePresence SX20 with firmware TC7.1.4.908e4a9 and has been synchronized with the touch screen. Can I use remote control when the touch screen is activated. Now the remote control is locked.

  Thank you to.

  Hello

  N ° when a codec is associated with a touch controller, it is not possible to use the remote control.

  You question No. 677 in link below

  http://www.Cisco.com/c/dam/en/us/TD/docs/Telepresence/endpoint/articles_doc/telepresence_endpoints_knowledge_base_articles.PDF

  BR Oleksandr

• How to check the system configuration of the SX20 if the touch screen and the remote control does not work

  Hello friends, would like to know how can we access/check the system configuration of the SX20 if we not touch and remote control or they are not in working condition.

  I think that we can check this Switch interface, but unfortunately, I don't have access to the local switch right now.

  Hello

  option is to have access to the local switch and run "show cdp neighbors detail."

  or

  Connect the mobile to PC/computer LAN, run tftpd32 with affected DHCP pool. Then you can login to get the config.

  regds,

  Aman

• Remote control does not work, and the load does not appear on Apple TV

  Hello

  I just returned from vacation and my remote seems has stopped working.   Naturally, my first assumption was that the charge was simply exhausted.

  Apparently that was the case.   He seems to have just died.

  I did pay for more than two hours and it still does not appear under devices Apple TV.

  My Apple TV 4 works very well because I use the remote control of my phone to navigate through it.

  If I understand correctly what I look at you, it seems that the remote control is same not synchronized or recognized by Apple TV more.

  Any suggestions on how to fix this?

  A reset is complete? Restart... no change.

  Thank you

  Bob

  1. Have you tried pressing the menu and the button for a few seconds while it now an inch or two away from the Apple TV, if successful, you should see a message on the screen saying the remote was paired.
  2. If you have an older remote from a previous model MacBook or Apple TV, you can use to restore the Apple TV, which, in many cases, has been sufficient to reactivate the remote Siri. You must complete all upward to undertake a restoration.
  3. If you have a USB cable - C you can try to restore by connecting it to iTunes on a computer.
  4. If you have tried all of these steps, don't have a distance sooner or a USB - C cable or their use is too inconvenient, return it to the store where purchased for a replacement, or to couple for you.

• Remote control loses connection several times

  Remote control repeatedly goes off line and then throughout the programs.  We loaded so that we can check the list of probable causes.  It has become a source of irritation when you're immersed in a movie and that appears on the screen.  Any fixes or suggestions?

  I guess you are referring to the distance of Siri to Apple TV version 4. If so, I think it turns off the Bluetooth radio when he sleeps. When you wake up it upward, probably by moving it (remember, it has a movement sensor), it reconnects and ATV reported 'remote control connected. " If this message is your problem, you could make it clearer in your title and description. Since you are immersed in the movie, I assume that you do not use the remote control to control the system. If leave him you alone, he has to sleep with happiness. If you use it to adjust the volume, maybe you can use a different remote for it.

  In addition, your profile (GIS) said Apple TV 2 iOS 9.2.1 which makes no sense. You should correct it, maybe for Apple TV 4, tvOS 9.2.1.

• How can I remotely control the music on the 4th generation Apple TV

  On the 3rd generation Apple TV, I could use the app Remote for artist, Albums, songs and playlists which was to play directly from the Apple TV remote. This allowed me to sit on the deck and set or change my playlist remotely while my Apple TV played on and on. I couldn't count on Airplay from my iPhone to the Apple TV because of being at the edge of my wireless connection. So I used the application to load a playlist on the Apple TV, which was always in range and connected to my stereo.

  With the 4th generation, I can't find an option to load remote a playlist, artist, album, or song. I can only handle what has been loaded using the physical remote control and a TV screen that beats my goal. I bought the 4th generation, because the 3rd generation could not access my subscription of Apple's music while the 4th generation can.

  Am I missing something or is the 4th generation Apple TV / Remote app missed something?

  Make sure that your Remote application is up-to-date. The current release is 4.2.3 and fully supports the music playback controls.

  Remote by Apple

  https://appsto.Re/us/g198q.i

• For the remote controls of the Keynote?

  I want to use a remote control for a presentation in Keynote, I'll give.  It will be my first with a remote control, but which is later - should I buy a (If Yes, who?) or what is the last and the best app for me to use my iPhone as a remote control (which I prefer, a gadget to lose less!)?

  Please use a simple language with me, a digital native.

  I use my aging MacBook Pro with OSX 10.7.5, my speech is 5.1.1 and my iPhone is a 6s.

  Thank you!

  Using a method rather than another is a personal preference, my preference as a coach and lecturer working in several different locations is to use Keynote for iOS, it has built in the remote control feature:

  Tap to go to the next slide

  previous slide scanning

  Pen tool marker on the screen

  the highlighter to screen

  the iPad displays the screen of the presenter, showing the next slide and notes of the speaker of the presentation on the Mac

  

  There must be a wifi network present, you can connect; many businesses teaching institutions lock unregistered users by default

  The site Web of Keynote iOS is here: Keynote for iOS

• Satellite X 200-20s: remote control no information and no operation.

  It is a reasonable laptop if you do not mix the software, if you buy and install norton 2008 and Office 2007.

  Thought I would try a DVD on this point, on-screen controls works very well.

  Tried the remote control.nothing (RC6),
  Tried R/c in some programs to a DVD standard, no, I / R functions at all. OK lights up.

  Any idea on where to find all the information about the remote control anywhere on this earth?

  Toshiba seems to miss this out my booklets of instructions completely.

  Or is there a hidden place?

  Boyfriend sorry but I don't understand why you weren't able to find page 9 in s manuals for Satellite X 200. You can find a few sentences very important:

  + This computer is equipped with a remote control, which allows you to control * some * of your computers to outermost. +

  + * IMPORTANT *: +.
  + Remote is specifically designed for this computer. +
  + Some application programs * can not * support remote control function. +

• Windows 8 on HP TouchSmart IQ826t (including REMOTE CONTROL) successfully installed

  Here's the background.  I have a TouchSmart IQ826t running Windows 7.  I have installed on it, (same partition), Windows 8 RTM using a DVD.  The installation went without a hitch and Windows 8 is installed.  I've had two disappointments: 1) the possibilities of contact not only that it was very difficult to slide on the screen side and the only way to scroll from left to right was to use the scrollbar at the bottom of the screen.  (2) turner of the TV does not work, but I am hopeful that it will be the 26 Oct when Microsoft releases the Media Pack.

  Thus, the question that I continued to work on was the touch feature.  I came across an update from HP that I missed for Windows 7 called "NextWindow 1950 Touch Screen Driver Update", which was to improve the answer touch near the edges of the screen and resolved a problem of sensibility in the upper right of the screen.  I downloaded it, (sp49787.exe) and tried to install it.  He would not have installed.  However, the part "NextWindow 1950" of the title was a clue.  I have been looking on the NextWindow site last week and I remember seeing a driver Windows 8 touch screen on their Web site: http://www.nextwindow.com/nextwindow_support/Windows_8_Touch_Screen_Driver.html

  I took a chance and downloaded.  Before you try to install it, I created a new system in case restore point where and then installed.  The installation has maybe 4-5 minutes, but he reported that he managed.  Without having to reboot, I checked the tactile ability and WOW, it works now as my 7.5 Windows phone with lots of scrolling left and right as well as perfect sliding on the side of the screen!  Just to be safe, I restarted and everything works great!  Thus, it seems that the driver on the link above is the solution at least for my model.

  Chuck

  I found how to get the HP Remote to work with my IQ826t! I was reading something and it reminded me that I had never gone through the list of Services on this computer. I found a service that has been extinguished called, 'Human Interface Device Access. I changed the properties of it from manual to automatic. Rebooted and WOW, the remote will now control the Volume, Mute and other functions, he was ignorant. NOTE: Before I tried this service I also found a service called "HP Software Framework. It was also well manually. I changed it to auto - delayed, but I don't think that this has nothing to do with the question. First try the service of Human Interface. I rebooted several times and the remote control of the TV still works. YES!

• Re: How to reconfigure the remote control for Qosmio F50?

  Hello
  I have a Qosmio F50, which came with a standard remote control for applications like media library etc, how do I reconfigure the keys to do exactly what I want it to do?

  For example the button power on the remote control to completely stop the machine instead of standby

  Thank you
  Dan

  Hello Dan

  Why do you think something like this is possible? What is this described in s operating manuals.
  If something like this can be done, it must be described in the manuals?

  In 10 years Toshiba has offered several different notebooks with the remote, but something like this was never possible and remote control buttons were always with defined function.
  You have some really cool ideas.

• Remote control does not respond with Toshiba 24D3434DB

  I recently bought a smart TV 24D3434D.

  I was incapable of analysis for all channels when I bought because I didn't have an aerial socket in the room in which I used it, but I was able to use the tv feature smart until suddenly the TV displays a screen telling me that no channel was available and no longer responds to the remote control.

  I returned to the store and the tv started to react to the remote control again and they were able to search the channels it. When I House and rekindled it remote control not responding until I tried again the next day after I left it unplugged over night.

  In the morning, I found that the remote was working again until I plugged the tv in an adapter and not directly in the sector where the TV no longer responds to the remote control again.

  Anyone know why this is happening or what I can do to fix this?

  Thank you.

  > In the morning, I found that the remote was working again until I plugged the tv into an adapter and not directly in the sector where the TV no longer responds to the remote control again.

  What adapter do you mean exactly?

  The remote control works correctly if the TV is connected directly to the power grid?

  To be honest, it's the first time I encounter this problem.
  Perhaps some sort of light affect the functionality of the remote control, it is maybe s really a TV or remote hardware problem.

  I guess to see what s twist exactly you should test with a different remote or another TV and same remote control.

• Satellite P500-1DZ starts only with remote control

  Hi, I just bought a new laptop Satellite P500 after owning a P200-13Z and P300-160 years without ever having had a problem with one of them.

  I have a problem with the P500-1DZ that I bought because it does not start the power button when he was arrested for a period of time, as for example the night.

  If I stopped and immediately press the power button its fine and it starts as well with the remote control.

  In the BIOS, I noticed that there is an option for remote start to the top of the control that is enabled, but Im a little worried about this deactivation in case I can't restart the laptop... everyone has ideas?

  Also for other users of the P500 who are dissatisfied witht the audio output of the laptop, I fixed that uninstall the Audio drivers Connexant HD, then by restarting which allows Windows to install its own audio drivers... which has greatly improved the audio output of the laptop... even if its not as good as the old P300.

  Thank you

  Hi spidercpfc,

  This question really strange s with this start of the issue and I think that it of difficult to say why it happens exactly, but as written Akuma you should try upgrading the BIOS. You can download it from the official page of Toshiba:
  http://EU.computers.Toshiba-Europe.com

  Last week I updated the BIOS of my P500 also and it worked, I t has not had any problems. I updated the BIOS to the version preinstalled Windows as an administrator. Also, I closed all programs running (AntiVirus, Firewall, browser, etc.) and disconnected from the network. After a few seconds the update was done.

  After the update, you should also load default settings in the BIOS. So press F9 in BIOS setup and save these settings.

  I hope this works. :)