Example: Photosmart B209m: Photosmart B209m

Similar Questions

• My printer has an internal hard drive?

  I think I can guess, but I need to be sure before disposing of my old printer:

  My OfficeJet 635 has a hard drive inside that I have to wipe before you send it away?

  (suggestion: this issue hit the heyday of media this last fall.) It is encouraging that HP has a section of significant support on their Web site that addresses this issue, but it's too complicated for the Home Office. I don't have any big assessment or security implementation tools; I just need to know if there is a hard drive in my printer. A simple list printers with the answer (yes/no) because everyone would be enough. ;-)

  Thanks in advance.

  Scott

  There is no hard drive in your Officejet 635.  With probably a few thousand printer models, there would be no such thing as a 'simple' list, but the following can help:

  • HP Officejet and Deskjet printers: none have hard drives.  Some do have photo cards slots, make sure that there is no card in the slot before getting rid of the printer.
  • HP Photosmart printers: most / all models have slots for photo cards, make sure that there is no card in the slots.  The units of Office sizes have no hard drives.  Some of the small portable units (which print 4 "x 6" and 5 "x 7") have hard drives.  Examples: Photosmart 475.

  The following are for the most part outside my area of expertise, while others may have more details:

  • HP Laserjet printers: some models have hard drives.  See the manual for more details.  I know the Laserjet, Laserjet + Laserjet II, Laserjet III, Laserjet 4, 4 M, 4L have no hard drives.
  • HP Designjet printers: some models have hard drives.  (I know the Designjet 430, 450, 650 c, 750 c have no hard drives).

• ePrint by email alias

  Hello

  ePrint is working on my Photosmart printer when I send a document to its native e-mail address.

  Since this email address is random name, I put an alias of electronic mail in order to use a more convenient e-mail address, for example [email protected].

  However, if I send an e-mail to the alias, it is not printed and ePrint throws a "too many recipients in an e-mail message. I understand the limitation ePrint from one recipient (use BCC to others), but in this case, it's just a recipient!

  Any suggestions are welcome!

  Thanks for the reply, I take no need to look any further: he won't fly.

  I'll just add at the end of the queue from others in waiting for this function is possible!

  Best regards, W.

• can someone help me configure my scanner hp photoswmart

  How to stop an autoclave to be wifi?

  /

  Hello Terry,

  Most wireless printers have an alternative USB. You have an installation disc? If not, what is the name and number of the model of the device, for example, photosmart 6100 or whether it is specific to the East? Using this information, you can download the full installation disc on HP.com.

  Let me know if this helps you.

  Kind regards

  BearPup

• Example: Pavilion Elite m 9040: Solution Center HP for HP Photosmart C6280 all-in-one on Windows 7 Ultimate 64 bit

  Once I had the HP Solution Center. I would like to download again for a HP Photosmart C6280 all-in-one on Windows 7 Ultimate 64 bit but can not find the download. Anyone know where I can find and download? The computer is a HP Pavilion Elite m9040n PC.

  @JCL9

  Here you go...

  Your Web site Support Page printer - and full functionality Softaware for Windows 7:

  All-in-one printer, HP Photosmart C6280 range

  Help, information and examples:

  Install the full features software - printer

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  My answer-click accept as Solution to help others find answers.

• Example: HP PHOTOSMART 7529e: how to make two-sided printing automatically with printer HP 7520

  All I'm doing is to make my printer two sided front or double.  No matter what I check IT DOES NOT WORK.  I checked "2 sides, 1-2, NOTHING.  What amazes me is that it worked until recently and now he just does not have double-sided printing.  I'm probably doing something wrong, but WHAT?

  filgrastin

  In General, duplex printing is consulted / adjusted printing preferences.

  If you print from an application, for example, in Word or in your browser, you reach the printing of the preview preferences before printing.

  Reference:

  Manage the print with preview output before printing

  Excerpt:

  • Print - print options access preview

  The browser page > file > print > properties

  Access Printing Preferencesproperties:

  Paper Source (tray selection), paper size, media, Orientation, print on both sides, page order

  Reference: Printing Preferences

  ================================================

  Click on the thumbs-up Kudos to say thank you!

  And... Click on accept as Solution when my answer provides a fix or a workaround!

  I am happy to provide assistance on behalf of HP. I do not work for HP.

• Photosmart + B210 impressions of pdf files, but not from word, Notepad for example. Vista

  Print multiple color pdf format.  Cannot print a document in word, wordperfect or notepad thereafter.   Printer goes through normal routine but ejects the blank pages. I went back to the original pdf, and it prints fine.

  I went through everything on the sitesuggested of support for HP for re - print.   The test says it all tool of fine, but will not print a test page, even if it goes through the motions resulting in a blank page...  In addition to several resets, I completely deleted the printer and the software and re-installed with drivers latest the same result.  Print spooler is empty, the printer is default, not pause or offline, connexionUSB.  No error message.

  Thanks in advance.

  PDF files may print black using the color cartridges.  Looks like your black is not printing.  See the steps of troubleshooting in the paper here.  If this does not resolve the issue post here can help.

• Photosmart B109 n - z: lost wifi

  My Photosmart B109 n - z lost wifi connectivity. I had a loss of power after what my router was not working properly. The router now, OK but I can't see the printer either from my laptop Windows 7 or my HP smartphone application. All other devices are connected OK.

  Chris46,

  You can reinstall the software of full functionality for the printer.

  HP Photosmart Wireless all-in - One Printer - B109n drivers

  After installing the software, check if the category updates apply to your situation.

  If you have already reinstalled the printer software, you can try to restart everything, including the router.

  If this does not work, you can try using the Web integrated (Embedded Web Server) server to reset / double check network settings in the configuration of the printer.  You can use your browser preferred for it - Internet Explorer or Firefox, both work well with EWS.

  General example - EWS Networking

  

  Click on the Thumbs - Up Kudos to show that you appreciate the help.

  Click on accept as Solution when the answer provides a fix or a workaround!

  I am happy to provide assistance on behalf of HP. I do not work for HP.

• Photosmart 7520: Paper and possibility of selection of quality always change to the photo paper

  I'm unable to select different types of paper and print quality.
  whenever I choose another paper automatically return to advance and normal quality hp photo paper.
  If for example I change quality printing at best on plain paper automatically become Hp advanced photo paper.

  Any help please? I am very frustrated

  Hey @antonello2,

  Welcome to the Forums of HP Support!

  I understand that you have some problems with printing to your Windows 7 PC to your 7520 Photosmart e-all-in-one printer. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once done:

  1. If the printer is connected to your PC via a USB cable, remove it.
  2. Close any programs you have open.
  3. Click on start and open devices and printers.
  4. Right-click on any icon of your printer listed.
  5. Click on remove the instrument.
  6. Repeat for all other icons of your printer listed.
  7. If you removed the USB cable, connect. If this is not the case, click on add printer and follow the prompts to add a new queue for your printer.

  Please let me know if this allows you to change the paper settings. If so, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• Photosmart C7280: the printer does not print

  I have a Photosmart printer and an HP Pavilion all on a PC running windows 8.1. Recently changed service broadband provider and have had printing problems since then. I have set up the Wifi and can produce a test print, I can also print HP troubleshooting, but impossible to print whatever it be held on PC, such as documents and pictures.  I get a message saying "send to printer", but nothing happens.

  I have tried setting up via a usb cable, still unable to print...  I uninstalled reinstalled the printer restarted by taking the plug from socket & crossed the HP step by step, guide, but no change.  The printer has accepted the new Wifi system & shows the logo of the Wifi on the small screen.  I even tried to print things via Adobe Photoshop, but still nothing.

  Any help would be welcome.

  Thank you

  Hello 643gs,

  Welcome to the HP Forums.

  I see you are having some problems printing via a wireless connection.

  I have a few steps we can try.

  Let's start from square one.  First of all, please make sure that you have the printer power cable connected directly to a wall outlet and not a bar/power strip. Here is a document that uses a LaserJet printer for example, but it is intended for HP products in general. Please click the link which explains the problems when connected to an uninterruptible power supply/Strip/surge protector power.

  Here is a link to the uninstaller (Windows 8).  We want to have all the software and drivers removed so that we can start fresh off.  Once the uninstall is complete, reboot the computer.

  When the computer is back on, click on the following link for the drivers and software HP Photosmart full feature.  Save this file on the desktop so that it creates a new icon.  Double-click the new icon and follow the installation instructions.  When you get to the connection options, move it to the printer and follow the next set of instructions.

  On the front panel of the printer, go to the Setup menu.  Once in the configuration of the menu display on the network menu and down to the restore default network settings option.  Once the network has been restored, make the wireless configuration wizard.

  When the wireless configuration wizard is complete, you should then be connected to the network and be able to see an IP address. Hover over to the computer and make the Wi - Fi connection and type the IP address that you received just from the printer.

  You should now be connected and be able to print from the computer.

  I would like to know if you have any questions or concerns.

  See you soon,.

• c7180 Photosmart all-in-one: some emails will not be printed

  some emails will not print. I unplugged the printer - still does not print. also, these emails do not fit into the page - have to landscape.

  @missouri97

  Assuming that you have installed the full function of the printer software, it is probably not the printer to blame.

  Printer:

  All-in-one printer, HP Photosmart C7180 range

  Full software features:

  File name: AIO_CDA_FSW_Full_Win_WW_140_408 - 5.exe

  The browser you use to view the emails aren't always the settings you need (for example, Page Setup to adjust the size / width Fit).

  The browser or program may be missing parameters in order to translate something that the printer can understand the content.  Strange fonts or images in the content is a possible cause of printing email problems.

  Other...

  Chrome provides little in the way of the configurations - a singularity in the browser Chrome as it shows on my system Windows 10 Pro:

  Chrome > open web page > settings > print > additional settings >

  Most of the content of the page (to print) does not appear on the preview screen.

  Click on the graphics to UNCHECK > click again to CHECK the graphics >

  and the graphics and the text finally appear as expected...

  • Try another browser to open the email
  • If not using a Navigator > check the print settings in the e-mail program, you use
  • If all else fails, download / Snipcontent, save and print the data as an image

  • Reinstall / update your PDF reader (Adobe Reader DC / Foxit)

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  Fixed / responded? Click this post accept as Solution to help others find answers.

• Can't print Photosmart C5280. Error "object GPCore COM has stopped working and was closed".

  I have problems printing my Photosmart C5280 All-in-one on my desktop of Windows Vista 32-bit. I felt for a few years and have only recently met this issue. A few months ago, I set up a home network so I could print from my Toshiba laptop. The printer is connected to the computer via a USB cable and the laptop is connected via a Bigpond Modem/Router which is connected to the desktop via an ethernet cable. More recently, I have also configured for my son to be able to print from his HP laptop. Initially, we were able to print from any computer. The two paltops are running Windows 7 64 bit. However, in recent weeks, we noticed that we were no longer able to print from a laptop, and a few days ago, I was unable to print from the office. When I try to print from the office, the print job seems to go to the print queue, but is then removed from the queue. I then get an error message

  "GPCore COM object has stopped working and was closed".

  
  

  This applies to all applications even the test print. I just went through the steps on the HP site, including downloading and execution of printing HP troubleshooting and doctor Scan and uninstall then reinstall the printer. I'm a bit of a novice at the side Computer Hardware and wonder if there is anyone out there who has had a similar problem and found a solution. Any thoughts would be appreciated.

  Hello MikeF48,

  Sometimes to do a simple uninstallation / reinstallation is not do the trick, and we try to remove all the software from the computer completely. Most of the drivers available at HP have a scrubber utility that removes all traces of the software on the computer and allows you to reinstall the software fresh. We should start there and see if that gets us running.

  I recommend you to do all this on the Vista machine. Once we have a working computer we can then pass from there to other laptops.

  Here are the instructions to use the tool of the scrubber. There are two sets of instructions, one for if you have installed the drivers from the HP website or if you have installed the drivers from the CD that came with your printer. Follow the instructions for your installation accordingly.

  Of the Original installation CD:
  1. Insert the CD in the drive and then cancel Setup
  2. open my computer and click right then on the CD from the drive and select open
  3 open the Util folder
  4 open the CCC folder
  5. If you have an HP computer, run the L3uninstall.bat. If you have a computer not HP, run the L4uninstall.bat
  6. once the uninstall is complete, restart the computer
  7 run the Accessories\ System Tools Disk Cleanup
  8. download and install the latest version of Adobe flash player
  http://get.Adobe.com/flashplayer/
  9 download drivers and full software features
  Software & Driver Downloads - HP Photosmart C5280 All-in-One Printer - Vista
  10. run the download to reinstall the printer
  
  If the software has been downloaded and extracted to your system:
  1. type % temp % in the field of race
  2. Locate and open the folder starting with 7z (example: 7zS2356)
  3 open the Util folder
  4 open the CCC folder
  5. If you have an HP computer, run the L3uninstall.bat. If you have a computer not HP, run the L4uninstall.bat
  6. once the uninstall is complete, restart the computer
  7 run the Accessories\ System Tools Disk Cleanup
  8. download and install the latest version of Adobe flash player
  http://get.Adobe.com/flashplayer/
  9 download drivers and full software features
  Software & Driver Downloads - HP Photosmart C5280 All-in-One Printer - Vista
  10. run the download to reinstall the printer

  After having uninstalled the software and did a reinstall of fees. Let me know if the problem is still the Outlander.

• Unable to connect wireless with Photosmart 2510

  I just upgraded my router from G to N.  I have a Linksys WRT10N.  My network is secured with WPA-Personal.  Since I upgraded from G to N and WEP to WPA, I'm unable to get my 2510 Photosmart to connect to the wireless network.  Initially, I was in WPA2 and downgraded my network to WPA with on security a bit of luck.  I entered all encriptación WPA data in the web browser integrated prior to installation.  I tried to install it several times and everything seems to go through OK but the blue light on the cover of never turns on again when the ethernet cable is disconnected.  When I run the network config. page it says "scanning" status of wireless.

  I talked to Linksys and they told me that the network N should work down to a B network printer.  Does anyone have any suggestions?

  Thank you!

  Hi Kim,

  All printers inkjet wireless HP since 2004 supports WPA - PSK and WPA2-PSK.  All new HP inkjet will certainly support WPA - PSK and WPA2-PSK.

  I'm more familiar with the WRT54G, but the WAPG works as well.  Here is how to convert the WRT54G in a simple access point:

  1. Connect LAN port of the WRT54G #1 and open the web without wire-router page (it should be 192.168.0.1 or 192.168.1.1)
  2. Go to the wireless section of basic wireless settings.  Create a new SSID and choose a channel without overlap, which differs from the WRT160N.  In North America, the overlapping channels are 1, 6, and 11.  Press to save the changes.
  3. Go to the wireless security section and the configuration up to WEP.  Press to save the changes.
  4. Return to the configuration page.  Disable the DHCP server and set the router IP address to something other than then the address IP of WRT160N.  For example, if the WRT160N IP address is 192.168.0.1, and then set the WRT54G to 192.168.0.201.  Make sure that the first three groups of numbers of the IP address are the same.  Press to save the changes.
  5. Now, connect an Ethernet cable between WRT54G #1 LAN port and one LAN of the WRT160N ports.

• HP Photosmart 6250 OCR compatibility

  I have HP Photosmart 6520 connected to my Mac OSX 10.9.4. How will I know if it's compatible OCR & if this is how I get it to work?

  Hello
  The software provided for your device does not include OCR functionality
  As you can find listed in the specification of digitization, text files like TXT or RTF are not supported by the HP software:
  http://www.shopping.HP.com/en_US/Home-Office/-/products/printers/HP-Photosmart/CX017A
  
  You can use OCR 3rd party to analyze as editable text.

  VueScan for example provide OCR capabilities, as well as applications like Read Iris or OmniPage which can be purchased. You can search the Web for any freeware OCR solution, I don't personally know of such however.
  
  Kind regards
  Shlomi

• Photosmart 7520: Cannot find my scans on computer since installing Windows 10

  Since I've upgraded to Windows 10, my printer scans but I can't find the scans on my computer. There seems to be no way to put the scans I would.

  Hello
  
  Thank you for using the forum.
  
  You can download and install the software COMPLETE features of HP printing for your operating system:

  http://support.HP.com/us-en/drivers/selfservice/HP-Photosmart-7520-e-all-in-one-printer-series/5199461/model/5199462#Z7_3054ICK0K8UDA0AQC11TA930C7
  
  Once you have downloaded and installed the software, FULL of features, you will be able to print and scan.

  Open the HP printer assistant and click Scan.

  "Under the user of Scan interface > advanced settings ' > click 'Destination' > choose and type your location"Save. "

  Example below:

  

  

  Hope that helps.