ExaNode NTP Configuration and restarting the ntp service require Exa storage and DB service restart?

We strive to upgrade our 11.2.0.3 to 11.2.0.4 grid infrastructure, but before executing check that we have the below error

Common NTP Time Server checks began...

PRVF-5410: time server control failure common NTP

PRVF-5416: failure of the request of the NTP daemon on all nodes

Control of clock synchronization using time Protocol (NTP) network failed

We found a document of MOS suggesting to manually day /etc/ntp.conf and restart the ntp daemon - but it is not clear whether the services running the grid needs to stop. Can you please help

Thank you

No, we don't need to reboot.

The time is out of sync currently?

Thank you

Tags: Database

Similar Questions

Wireless Zero Configuration Error 1068: the dependency service couldn't start.

I recently updated my network card of a TP-Link TL-WN353G to a DWA-552. Now whenever I start, I have to manually configure my wireless car does not start the automatic configuration service. When I try to start the service manually, I get the above error message. I am running Windows XP MCE SP3.

Try to check the dependencies. View the Services window:

Start-> Run-> "services.msc".

Then, double-click the Wireless Auto Configuration. When the Properties window opens, click the "Dependencies" tab at the top. Then check that these dependencies are present and active.

HTH,
JW

Both the configuration and ntp.conf tab / step-tickers

Hi so just wondering with the new tab of configuration of time do I need to set ntp server in ntp.conf and step tickers or which has become redundant? Just I have a few guests who are about 10 min outside in their time, I checked and the file or ntp or tickers are defined but the time configuration tab is activated in the firewall client ntp...
Bravo!

I don't think you need to do something on the ntp.conf or step-tickers. you just need to enter the ntp server settings in the configuration tab. I've seen the issue you mentioned, but can be solved by restarting the ntp service available in the same window... hope that helps.

Assign points if you found this answer useful...

Problems with the configuration of the ntp service application

Hi people,

I'm stuck at the configuration of the ntp service to start by default on an esxi server via perl.

That's what I'm doing:

My $hostServiceConfig = new HostServiceConfig (serviceId = > 'ntpd', startupPolicy = > 'on');

My $hsca = [];

Push (hsca @$, $hostServiceConfig);

My $hostConfigSpec = new HostConfigSpec (service = > $hsca);

My $taskRef = $hostProfileManager-> ApplyHostConfig_Task (host = > $host, context = > $hostConfigSpec);

When I ask the status of the command fails:

SOAP fault:

-----------

Error string: the operation is not allowed in the current state.

Lack of details: InvalidState

I guess I'm just missing some small detail. Maybe someone sees my mistake right now :-)

Hi eholtz,

Here's the code I added to hostServiceManagement.pl (IIRC!):

1. check the boot strategy:

sub checkServiceEnabled {
        my ($serviceSystem,$service) = @_;

        my $services = $serviceSystem->serviceInfo->service;

        foreach(@$services) {
                if($_->key eq $service) {
                        return $_->policy;
                }
        }
        return 0;
}

2 then disable the service:

my $policy = &checkServiceEnabled($serviceSystem,$service);
if($policy eq "on") {
        eval {
                $serviceSystem->UpdateServicePolicy(id => $service, policy => "off");
                print "\t" . color("cyan") . "Successfully disabled $service\n" . color("reset");
        };
        if($@) {
                print "\t" . color("red") . "Error: Unable to change startup policy on service \"$service\" due to: " . $@ . color("reset") . "\n";
        }
}elsif($policy eq "off") {
        print "\t" . color("yellow") . "$service is already disabled" . color("reset") . "\n";
} else {
        print "\t" . color("red") . "Error: Unknown startup policy \"$policy\"" . color("reset") . "\n";
}

And to allow:

my $policy = &checkServiceEnabled($serviceSystem,$service);
if($policy eq "off") {
        eval {
                $serviceSystem->UpdateServicePolicy(id => $service, policy => "on");
                print "\t" . color("cyan") . "Successfully enabled $service\n" . color("reset");
        };
        if($@) {
                print "\t" . color("red") . "Error: Unable to change startup policy on service \"$service\" due to: " . $@ . color("reset") . "\n";                     }

}elsif($policy eq "on") {
        print "\t" . color("yellow") . "$service is already enabled" . color("reset") . "\n";
} else {
        print "\t" . color("red") . "Error: Unknown startup policy \"$policy\"" . color("reset") . "\n";
}

P.s.: based on your current score, you should be able to PM me now...

Kind regards

Thomas

NTP service

How many times did the NTP service for update survey in ESXI 4.0 and's settings in the Advanced section, where they can be changed?

By default, the NTP daemon will automatically adjust the polling interval of the order of 64 to 1024 seconds.

http://communities.VMware.com/message/1134442#1134442

It is best to ask a thread can be moved to create duplicates

If this post was useful/solved your problem, please mark the points of wire and price as seem you. Thank you!

How can I fnd my claim code and the reprint of the web services information sheet

Hi, I have a HP Deskjet 3520 and try to put in place the eprint. I read the suggestions on the forum and the FAQ but I can't locate the web services information sheet I need to reprint for claim code.

Could not find anything under Printer Control Panel either. Please advise!

Thank you!!

Hi Chris88,

Welcome to the HP Support forums. I appreciate that you try to configure the ePrint on your Deskjet 3520 printer feature.

If you have the inkjet printer Deskjet 3520 with a C8994 product number this printer does not have the ePrint service. The Deskjet 3520 printer only has USB connection and ePrint to function the printer must have an independent internet connection through a wireless or a wired ethernet network. I've included the specifications of the printer for your reference.

If you have the e-all-in-one printer Deskjet 3520 then we obtain the claim code. You can request the information sheet of web services from the front panel of the printer, and there the claim code printed in blue. Instructions on how to get it can be found in the section titled "to print a document using ePrint' in your on page 15 user's guide. Please follow the instructions in step 1.

HP Deskjet 3520 inkjet printer specifications

User's Guide e-All-in-One Series HP Deskjet 3520

Cannot install updates due to error code 0 x 80246008 and the BITS service is missing from the XP computer.

Recently, I reloaded a fresh load XP on my laptop. I was able to install SP3 and IE8, despite not being able to download them directly from the Windows Update site. I tried several times to install updates, one, five and all at the same time and is unable to install. I ran Fixit to many times and it says it solves some problems, but no single instance doesn't solve all of them. I also tried to update after the launch of a clean boot, always to nothing does not. I see many solutions on this and other Microsoft sites and I tried, but nothing seems to change the results. FixIt has reported the following:

-------------------------------------------------------------------------------------------------------------------------------------

Details of the update of Windows editor

Problems found
Registration for the service is missing or corruptService registration is missing or damaged do not fixed
Sign up for the service Reset Succeeded

Problems installing recent updatesProblems recent updates installation not fixed
Fix Windows Update succeeded

Problems installing recent updatesProblems recent updates installation not fixed
Fix Windows Update succeeded

Check verrouillesfichiers missing or damaged missing or corrupt files fixed
Repair missing or corrupt files Succeeded

Windows Update, error 0x8024402C (2013-11-28-T-09_56_27A) 0x8024402C(2013-11-28-T-09_56_27A) of fixed Windows Update error
Reset Windows Update of the data store Succeeded

Verified issues
Environment variables Windows Update are of incorrect update environment variable incorrectWindows Checked
Some security settings are missing or have been changedSome security settings are missing or changed Checked
Key of registry corrupt Patch registry Patch keysCorrupt
Detects the hotfix or corrupt cache Checked
Windows Update services aren't runningWindows update services do not run checked
Encryption services components are not the registeredCryptographic service components are not registered Checked

Problems found details

Registration for the service is missing or damaged do not fixed

Sign up for the service Reset Succeeded

Recent updates installation problems not fixed

Fix Windows Update succeeded

Recent updates installation problems not fixed

Fix Windows Update succeeded

Check missing or corrupt files fixed

Repair missing or corrupt files Succeeded

Windows Update error 0x8024402C(2013-11-28-T-09_56_27A) fixed

Reset Windows Update of the data store Succeeded

Issues checked the details of the detection

6 environment variables Windows Update are incorrect Checked

Restore the Windows Update environment variables is not running

Some security settings are missing or changed Checked

Reset the security settings is not running

Key of registry corrupt Patch Checked

Detects the cache fix corrupted or missing
Fix registry patch not working

Fix registry patch problems

Windows Update services do not run checked

Required for Windows Update registry files works not

Encryption services components are not registered Checked

Save the cryptographic components not working

Details of detection

The service status

---------------------------------------------------------------------------------------------------------------

Can someone point me in the right direction to solve this problem?

Thank you.

Original title: Windows Update will not install on the new load XP

Hi all

Thanks for your replies. Sorry I didn't answer sooner, but he got late last night, and I got to reregister the Qmgr.dll and Qmgrprxy.dll BITS files.

I clicked Start, click on run and typed the command following, and then click OK:

Start, run and in the run box, Type regsvr32 qmgr.dll, click OK.
Start, run and in the run box, Type regsvr32 qmgrprxy.dll, click OK.

I was then able to start the updates. There are 124 updates, the Microsoft .NET Framework 3.5 Service Pack 1 and the .NET Framework 3.5 Family Update for versions of .NET 2.0 to 3.5 (KB951847) x 86. He downloaded 124 updates, but even once asked me to insert the disc for qmgr.dll when he was installing the 10th update. I find the qmgr.dll file again and pressed OK, but it seems to hang forever and do nothing, then I simply cancelled updates and closed during the night. I have been relieved to have solved the problem of BITS, but is concerned by the hang up on the tenth update installation and he called again for the qmgr.dll file during the installation of updates.

This morning, when I rebooted, it installed some updates at startup, and I restarted again. He then held I first install the .NET Framework 3.5 Service Pack 1 and the .NET Framework 3.5 Family Update for versions of .NET 2.0 to 3.5 (KB951847) x 86 to date. N BITS issue for that. It took time, but completed settle. Restart again and now there are only 21 updates to high priority required. My guess is that he downloaded all 124 updates last night, but when I cancelled the installation after hanging on #10, he just started to install it again this morning and did so successfully.

However, when I try to install the 21 remaining, he has not once again, and I find that the BITS service is not in the services again. After I have re-enter the BITS service and restart it, the downloads are working again.

I am now what I may need to reinsert and restart the BITS service whenever I need to download an update.

Ideas, suggestions or comments? I am slowly solve problems and if I persist, I can get this all taken care.

Hi Dan,.

From what you wrote, I understand where you are getting confused. Here are the steps to follow to solve this problem.

Open the Windows search tool, copy / paste the following text, and then click Search: qmgr.dll

Research should show this file in the following locations:

C:\Windows\System32
C:\WINDOWS\ServicePackFiles\i386
C:\WINDOWS\system32\bits

I hope they are all present, follow these steps to register the service.

Click on start, run and copy/paste: regsvr32 qmgr.dll and click OK
(If you do not have the command run in the start menu, hit the Windows key + R, instead)

Do the same with this file: regsvr32 qmgrprxy.dll and then restart.

Here are the next steps.

Copy / paste this command in the field to run, and then click OK
%windir%\System32\rundll32.exe setupapi, InstallHinfSection DefaultInstall 132 %windir%\inf\qmgr.inf

Windows will launch a dialog box asking you to insert the Windows installation CD. Ignore this and change the way downstairs to C:\WINDOWS\ServicePackFiles\i386

The reason to change the path to the i386 folder is that the files that are there are newer than those on the Windows installation CD.

Then restart the PC again and continue with the rest of the troubleshooting steps.

Click on start, run and copy/paste the following and click OK: services.msc

You should now be able to see the Background Intelligent Transfer Service, or just "BITS" displayed in the list of Services.

Double click it to open BITS and then click on the Start button. This is just a test to make sure that it works correctly.

If you get 2 error: cannot find the specified file, click on start, then run again and copy / paste the following command, and then click OK:
Tracking Add HKLM\SYSTEM\CurrentControlSet\Services\BITS\Parameters /v ServiceDll /t REG_EXPAND_SZ /d %windir%\System32\qmgr.dll

Restart then try and start the BITS.

If you get the same error again, copy / paste the following text in the field run and click OK:
Reg add HKLM\SYSTEM\CurrentControlSet\Control\BackupRestore\FilesNotToBackup

Reboot once more and then try and start the BITS.

Let me know how you please.

Try to install the fax service and asking for xp sp3 cd, but I do not have it.

I upgraded my computer to XP SP3 on the internet and now I am trying to install the fax service, but it must be the SP3 files. How to get these files.

Hello

1. could you give us the exact error message?
2. where did you downloaded service pack 3?

You must have the Windows XP installation disc to install the fax service. See the article below for more information.
How to enable and configure the fax service in Windows XP
http://support.Microsoft.com/kb/306550

I hope this helps.

Thank you, and in what concerns:
Shekhar S - Microsoft technical support.

Visit our Microsoft answers feedback Forum and let us know what you think.
If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

I have several XP Pro PCs on a network and install a new mixer and re-install a NAS driving etc the Bonjour service ' should output "on several PCs

Hello, the Service stops

I have several XP Pro PCs on a network and install a new mixer and re-install a NAS driving etc the Bonjour service ' should output "on several PC. Although I was able to restart the service through administrative tools, Services I would like to understand why this service should pick out? It involves service of buggy code that can't cope? I've rarely met other Services just to die. No idea why this is happening and how I could avoid happening again as a normal user do not know how to fix it.

Unless you have Apple computers on your network (or a PC with the Apple software like iTunes and you share iTunes music between your computers), you need not Hello. Just, stop the service and set its startup type to manual or disabled.

Hello Apple support page

I downloaded Windows XP from the Windows Service Center. It is an exe file. How can I extract this to a disc and burn I can install it?

I downloaded Windows XP from the Windows Service Center. It's a .exe. When I click on it, it is extracted to a folder I called "xp". How can I obtain these data on a disk to install XP from a CD? Should what steps I take? I am running Windows 7.

original title: Burning a disk XP

Putting aside if the 64-bit version of XP is what you need, when you ran the exe, the file that was extracted (i.e., in the folder named "xp") should have been an ISO file.

Files ISO are CD images and are intended to be burned (NOT copied) to a writable CD.

Assuming that you have the correct hardware (CD burner), you can burn your ISO as described here: http://windows.microsoft.com/en-US/windows7/Burn-a-CD-or-DVD-from-an-ISO-file

Note that what you downloaded is NOT "Windows XP Mode" which is available for use with Windows 7 Professional, enterprise or ultimate edition. The image you uploaded is for installation on a separate computer (or in a dual-boot configuration) - assuming you have the required license keys.

I have a Dell Dimension 3000 CPU and I try to re - install a Dell 720 printer. I get the message. "Failed to start spooler log on the local computer. Error 1075: The dependency service is not...

Original title: Journal of spooler

I have a Dell Dimension 3000 CPU and I try to re - install a Dell 720 printer. I get the message. "Failed to start spooler log on the local computer. Error 1075: The dependency service does not exist or has been marked for deletion. I tried this diagnosticTo start print spooler service and also long-term arer services set it to automatic, follow these steps. a. Click Start, right click on my computer and select manage. b. in the console that opens, expand the menu Services and applications. c. click Services. d. click the button twice to spool print. e. in the 'Général' tab, go to Startup Type. f. the Automatic value. g. click on the Start button. h. click on apply and Ok. Click the Dependencies tab, and not all the dependency services and repeat the steps above to set automatic and start the service. Restart the computer after you start the services above. After restarting the computer check if you can install the printer. And a few others. Someone at - it suggestions? This printer has been operational on this computer at any given time. Windows XP Home / Firefox. .:

Hello

1. don't you make changes on the computer before this problem?
2. when exactly you get this error message?

Step 1: Run the fix it tool using the article below and check out them.

Problems printing and printing errors
http://support.Microsoft.com/mats/printing_problems/

Step 2: Try the steps from the article below and check out them.

Error message when you try to start the spooler service for printing on a Windows XP-based computer: "error 1075.
http://support.Microsoft.com/kb/915168/en-GB

How to configure the fax service

Fax

do I need a phone number to set up the fax I use dsl

Hi waawa1951,

Yes, you will need a phone and number phone of fax on the installation computer.

See the links for more information below.

How to enable and configure the fax service in Windows XP
http://support.Microsoft.com/kb/306550

How to send a fax in Windows XP

http://support.Microsoft.com/kb/306657

Use your computer to print, scan, fax

http://www.Microsoft.com/windowsxp/using/Setup/hwandprograms/printfaxscan.mspx

ID:2481 of the event, the UPS Service is not configured correctly.

I am running Win XP Pro, service Pact 3. I found this error in my event log.

I do not have a UPS, so I wonder why should I get this error at all. I checked my settings of UPS and no UPS is displayed, all my options are set to NEVER, why I get a fatal error, which I am. It does not shut down the computer, or even to tell me, but the newspaper it says that Windows is not allowing things to start because of the error.

?

Somehow, I don't think it's good to ignore error messages, but I guess you can.

The error means that the UPS Service is configured to start automatically with XP and if you have no set ups, the UPS Service will complain when it tries to start.

When XP tries to start the UPS Service, you will see an error like this:

Services
Cannot start service on Local computer uninterruptible power
Error: 2481 the UPS Service is not configured correctly.

You will also see errors in the Event Viewer log system like this:

Event type: error
Event source: UPS
Event category: no
Event ID: 2481
Description:
The UPS service is not configured correctly.

Event type: error
Event source: Service Control Manager
Event category: no
Event ID: 7023
The uninterruptible power supply is completed with the following error:
The UPS service is not configured correctly.

If you do not use a UPS system, you should the ups the value Manual Service or just turn it off.

To do this, click Start, run and enter in the box:

services.msc

Click OK to launch the Services applet and locate the mailing Service uninterruptible power.

Right-click on the Service, choose Properties, and set the startup type to manual or disabled.

Click OK to save the changes, close the Services applet and reboot the system to make sure there is no mistake and changes 'stick '.

Do, or do not. There is no test.

I decided to implement the points for a new puppy instead of a pony!

Error NET HELPMSG 3521 while checking the Update Service was stopped and the error code "8024000".

Original title: error NET HELPMSG 3521 while checking the Update Service was stopped.

Windows Vista. 32-bit, SP1 and 2

Long story short, I tried to fix my problem of update windows since the beginning of July 2011. My computer does not stop when you install updates automatically or manually. I got a 8024000 error. A shot an email to Ms support and I received an email quickly with some procedures to do. I don't have to make these 4 days later. Here is the part of the email.

This problem may be caused by the following factors:

1. the Windows Update service has stopped.

2 corrupt Windows Update temporary files.

3. bad Internet connection settings.

4 corrupted DLL files.

Step 1: Check the services concerned of the update of Windows

1. click on the button 'Start' in the 'Search' bar type: "services.msc" (without the quotes) and press ENTER. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

2. double-click on the service "Windows Update".

3. click on the 'general' tab. Make sure the "Startup Type" is "Automatic" or "manual". Then please click the button "Start" under "Status of Service" to start the service.

4. repeat the above steps with the Background Intelligent Transfer Service (BITS).

I completed this step.

Step 2: Rename the folder C:\Windows\SoftwareDistribution Windows Update

1. close all open windows.

2. click on the "Start" button, click "All programs" and click on "Accessories".

3. right click on "Command prompt" and click "run as Administrator".

4. in the window "Administrator: command prompt", type "net stop WuAuServ" (without the quotes) and press ENTER.

Make sure it is said that he has been arrested with success. OK, it worked.

5. click on the button 'Start' in the 'Search' box type "%windir%" (without the quotes) and press ENTER.

6. in the opened folder, find the folder named "C:\Windows\SoftwareDistribution".

7. right click on the folder, select Rename, and type "SDold" (without the quotes) to rename this folder.

8. while still in the window "Administrator: command prompt", type the command "net start WuAuServ" (without the quotes) in the window to restart the service Windows updates

It did not work. I received a message...

The syntax of the command is

NET [accounts: computer: config: continue: file: Group: help: helpmsg: localgroup: pause: print: session: share: start: statistics: stop: time: use: user: view]

C:\Windows\System32>_

I tried again from the beginning and now get the following error: NET HELPMSG 3521

"MS supports has not returned my emails to the technology or the Manager.

Can someone help me? Please notify. Suzzz-Q

There are many other measures that followed the foregoing. If anyone is interested in reading all of this...

Step 3: Component of Windows Update registry

============================

1. click on the "Start" button, click "All programs" and click on "Accessories".

2. right click on "Command prompt" and click "run as Administrator". If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

3. Enter the following command and press ENTER.

REGSVR32 WUAUENG. DLL

You will get a window "DllRegisterServer in successful c:\windows\system32\wuaueng.dll.

4. then please proceed to enter the following commands one by one. A success notification is received after each command.

REGSVR32 WUAPI. DLL

REGSVR32 ATL. DLL

REGSVR32 WUCLTUX. DLL

REGSVR32 STINKS. DLL

REGSVR32 WUPS2. DLL

REGSVR32 WUWEBV. DLL

If please test the issue again and let me know the result. If the problem persists, I'll help you check your Internet connection in our next communication. To clarify the issue and provide more specific troubleshooting steps, please help me to collect the following information.

How to capture a screenshot

======================

1. press the button print screen (print screen) on your keyboard.

2. click on the "Start" button, type "mspaint" in the search bar and press ENTER.

3. in the Paint program, click on the "Edit" menu, click "Paste". Click on the "File" menu, and then click "Save".

4. the dialog box "Save as" appears. Type a file name in the "filename:" box, for example: "screenshot".

5. make sure that "JPEG (*.)" JPG; *. JPEG; *. JPE; *. JFIF)"is selected in the box"Save as type", click on"Desktop"in the left pane and then click on"Save ".

Please send this JPEG file to my e-mail account to * address email is removed from the privacy *.

How to retrieve system information

=============================

System information can provide us with more information about the current state of the system. I would check for you. Please send it to me using the following steps:

1. click on the "Start" button, type "MSINFO32" in the search bar and press ENTER to start System Information.

2. on the pop-up window, in the menu bar, click on 'File' and click on 'Save', type a file name and choose NFO as "Save as type", click on "Desktop" in the left pane and click Save.

Please send it as an attachment to * address email is removed from the privacy *. If the file is too large to be sent, please right-click on the exported file, choose "send to"-> "Compressed file (zipped)" and then send the zip file for * address email is removed from the privacy * for further research.

How to recover the WindowsUpdate.log file

================================

1. click on the "Start" button, type "WindowsUpdate.log" (without the quotes) in the search bar and press ENTER. We will see a file named "WindowsUpdate.log".

2. now click on the 'File' menu and click on the "save under".

3. in the left pane, click "Desktop" and click the "Save" button.

Hello

Instead of all of the previous steps, you can just try the steps as shown in these methods and check if these help.

Method 1:

To resolve the error 8024000 follow the steps in the link and check if it helps.

Windows Update error 8024000

http://Windows.Microsoft.com/en-GB/Windows-Vista/Windows-Update-error-8024000B

Method 2:

See also article on the resolution of the problems with the installation of updates and check if this may help:

Problems with installing updates

http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

No Internet access. error 1747. and the dependency service or group could not start

Have a laptop dell inspiron 1545 with vista (build 6002: service pack 2). Have a wireless network at home. laptop stopped connecting to the network 2 weeks ago. When I try, I get a message "dependency service or group was able to start. When I go to manage networks, there is no detected networks. Cable internet access also does not work with this laptop. cards (minimap dell 1397 Wireless) wireless and ethernet say thet controller work correctly. 2 other laptops in the House are normally working on the network. Reviewing service autoconfiguration WLAN and Wired AutoConfig and when I try to start the two ths get message... "Error 1747 the Authentication Service is unknown". Another little thing, I noted... isatap.home don't works do not-message says to download the drivers- but not on net so cant)... don't know if this is related.

can you help me? Thank you, Aodhanm.

I just wanted to post that I used the

netsh winsock reset

command to fix this same error 1747 known when you try to manually start the WLAN
on a Windows 7 Pro computer.

After a restart it worked fine.

Chuck
NerdForce.com tech

ExaNode NTP Configuration and restarting the ntp service require Exa storage and DB service restart?

Similar Questions

Maybe you are looking for