Exchange SCR box cloning
Hi all
Quick question (or maybe not :-)) I was tasked to create a second SCR target in our data center in Dublin.) Our current DR site is home to an existing SCR target consisting of a mailbox server and a server HT / CASE.
Both these servers are virtual machines (VMware) - I was wondering if it would be possible to clone these boxes with exchange is already installed and move them to our site of Dublin.
My concern is that our orginazation of Exchange may not recognize servers, if I run the command setup/RecoverCMS.
TIA
Tom
Hey Tom,
First of all, off - welcome to the forums!
I'm not sure that I fully understand then perhaps you can clarify your question. There is already an existing SCR target in Dublin and you need to create another. If your thinking was to clone the existing SCR target to create a second?
For me, I would like to create a new VM mailbox Exchange from scratch and make an initial replication for databases of seeds. There is a large distance between the main site and the site of Dublin DR which would make a full seed impossible?
You can save you time with the clone, but personally I'd feel more comfortable with a clean installation of Exchange that I am uncomfortable is not the remains of a clone of another Exchange System.
Matt
Tags: VMware
Similar Questions
-
By clicking on the e-mail address, Server MS exchange dialog box comes up
To any site when I click on an e-mail address, a MS Exhange Server box Monte. How can I fix this so I can send an email?
This could happen because the default internet browser may not be IE and whenever you click an e-mail link, it will appear a dialog box.
In case, your default browser is Firefox, and it is running, you will not face this problem.But if Firefox is closed, then a dialog box opens to the top whenever you click on an email address.If this is the problem then, follow this link for troubleshooting tips: -
EXCHANGE SERVER MIGRATION PROBLEM
Unity 4.0 (4) SR1
Exchange 2000 BOX
Users were migrated to an older exchange server, less stable, to a new through the usual advertising------change of method of moving users from one server to another.
The old server is still in place and active.
When it breaks down, the UNIT is unable to deliver messages to subscribers.
Do I have to re - run exchange on the unit configuration wizard to define the new server as the main? Otherwise, any ideas why the old server to be up? What is the workaround-difficulty?
Moreover, this most recent server will be upgraded to EX2K3 in the coming months. What needs to be done to the unit to perform this update (I'm looking for a link to the PDF here)
Thank you
mast
The unit is oriented to the old server server partner. Please see this guide:
Changing the swap Server
The tool that you will run is Configuration of Message Store assistant
For your second question:
Upgrading Exchange on the Cisco Unity system
-
Changing the Configuration of the Exchange outside autonomous UNIT-
Hello
After reviewing the first I can not find any son who point me in the right direction... My situation is: -.
I currently have 1 current Exch 2000 unit on box. The customer now wants to integrate the UNIT with its new Exchange servers. Is there a way I can do it without losing all my 400 subscribers and recreate them. I don't see the usefulness of working for this DIRT.
Pointers please...
So presumably the Exchange/unit box combo on is not in the directory as well as other companies Exchange servers... Yes, it is migration 'VM to UM' classic.
Are just the e-mail alias for voice only of e-mail users currently on the unit identical to the e-mail alias for corporate e-mail boxes? If so, DiRT runs like a champ in this scenario, because during the restoration he's looking for the users in the directory by their Id directory, then their RDN, then their mail alias - if a match is found on one of them that it binds to this user on the fly - if no match is found then it will create a new user in the directory.
If your e-mail alias does not match then you can always do a two step operation here - do the restoration of dirt (which will create new accounts) and use the tool to migrate data from the Subscriber to transfer the data of the unit to these new accounts to their appropriate corporate email account - this is preserver of all greetings voice names, passwords etc... Subscriber data migrate also has ExMerge built into it, so it can move messages and merge them into their e-mail so accounts (the same that dirt can do).
He is planning a white paper which can help a bit, although it is more for people deploy VM now and go UM later - in the case of the train left the station a little already but it can still be useful:
http://www.Cisco.com/univercd/CC/TD/doc/product/voice/c_unity/whitpapr/migvm_um.htm
-
Chinese BlackBerry Smartphones
I have an AT & T China user who is having a problem
Tourch 9800
OS - 6.0.0.284
AT & T
Everything is in Chinese accept her e-mail (exchange). Send SMS and web surfing in Chinese, his company e-mail isn't. All users in China (which are on the same Exchange BES boxes and as long as this user) are working very well. Seems that this is the only device with questions and the only device that is v6.
Seller said it was a matter of BES.
Do we need to upgrade the operating system... we can do wireless?
Thanks for the help!
DD
I forgot to post... difficulty the provider AT & T had user flash ROM and this fixed a problem.
-
. CMHA-Datei / .acsm file
Nach Rechnerwechsel mit komplettem clones nicht die Datei .acsm atmosphere. ADE 4.0.3 im Einsatz. Can someone help? Vielen Dank im Voraus as your Antwort.
After computer Exchange with bath cloning, le . CMHA file does not. ADE 4.0.3 . currently in use. Can someone me? Thanks in advance for your response.
Scheint was mit den proxy durcheinander Australia zu breast... Versuch bad wen Digital Edition gestartet ist auf Datei > Zur Bibilothek hinzufügen zu go. Exported da die Datei Park. Wenn're nicht hilft, boar once, ob er not Fehlermeldung anzeigt?
-
Oh, I of course put the whole issue in the reference line.
I'll repeat it here.
I want to Exchange my hard drive of my iMac for one SSD. The existing hard drive will be cloned on the SSD. I have CS 3 Design Standard installed. What I have to deactivate/reactivate CS3 or will keep the data license/activation?
Thanks, Thomas
Transfer facilities of Adobe does not normally operate. You must reinstall using installation files. At a minimum you must disable, but you may find that you need to uninstall and reinstall.
-
I bought lightroom and photoshop a week ago and successfully installed on my new iMac. the iMac box open ends up being a lemon so I had to exchange for a new one. best buy wiped the old computer. now I'd like reinstall lightroom and photoshop on my new computer, but I don't know how. Help!
Download and install the trial version of http://www.adobe.com/downloads.html and activate it with your serial number or your Adobe ID.
-
Microsoft Exchange Server error make a new box for the user's mailbox in my ad
while I try to make a new mailbox for the user in my ad.
There was an error..."Get-ExchangeServer failed.
"Get-UMServer failed."The server active directory K1.telkomcdp.com is not available. Error message: a local error has occurred. It was running the command ' get-recipient - Resultsize '1000' blah... blah... blah ".
and active directory cannot be contacted
I try to solve this problem all night... but it isn't anything happen,.
need help
Thank youHello
You will need to create a new post on the TechNet site for support with Exchange: http://social.technet.microsoft.com/forums/en-US/category/exchangeserver/
-
Hey,.
In the new CS6 I can click on the variable width tool, but cannot see any of the tools. If I click on the empty looking boxes, although it will change the preset. Anyone know why or how to fix this? Tried using the tools as well but same problem here.
Cordially Steffi
Click Reset profiles of race, but then cancel it. The profiles should appear.
-
Cloning of the db to the new Linux box
Hello
There is a new linux box and I need to clone the Pb of production in this box. I did the preclone on the Pb of production steps and then copied all of the files (reception and data files) after stopping on the new linux server.
When I run adcfgclone.pl dbTier, I get an error
806 Installer uses the oratab file.
The needs to exist oratab file to the: / etc/oratab
Y at - it target any pre-reqs that needs to be done on the server.
DB: 11.2.0.1 on Linux 5.0
Applications: 11.5.10 on AIX 5.3
NeelWhen I run adcfgclone.pl dbTier, I get an error
806 Installer uses the oratab file.
The needs to exist oratab file to the: / etc/oratabY at - it target any pre-reqs that needs to be done on the server.
/ Etc/oratab create manually and then try. If you still have the same problem, make sure that you have an entry in the file for the new ORACLE_HOME as follows:
SID: ORACLE_HOME:N
Where
is the name of the database, is the new ORACLE_HOME Thank you
Hussein -
SMTP transmission inside the Exchange box 25
Hi all
I've been dealing with this on my new pix for a while now.
I'll put up my config via the MDP is that OK or should I use the command line tool?
Also X end commands, should be given or turn off the firewall would do the same job?
Looks like a simple enough task but can't seem to break.
How to watch this config and if its ok what other reasons might be a failure?
6.3 (3) version PIX
interface ethernet0 car
Auto interface ethernet1
Automatic stop of interface ethernet2
ethernet0 nameif outside security0
nameif ethernet1 inside the security100
nameif ethernet2 intf2 interieure4
enable password xxxx
passwd xxxx
hostname PIX515E
owl domain name - housing.local
fixup protocol dns-length maximum 512
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol http 80
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol 2000 skinny
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol tftp 69
names of
192.168.1.3 OWL-W2KS-MAIL name
access-list inside_access_in allow a tcp
Allow Access-list inside_access_in a whole udp
outside_access_in tcp allowed access list any eq smtp interface outside eq smtp
pager lines 24
Outside 1500 MTU
Within 1500 MTU
intf2 MTU 1500
IP address outside 80.176.xxx.xxx 255.255.255.xxx
IP address inside 192.168.1.1 255.255.255.0
No intf2 ip address
alarm action IP verification of information
alarm action attack IP audit
location of PDM 192.168.1.50 255.255.255.255 inside
location of PDM OWL-W2KS-MAIL inside 255.255.255.255
PDM logging 100 information
history of PDM activate
ARP timeout 14400
Global interface 10 (external)
NAT (inside) 10 0.0.0.0 0.0.0.0 0 0
public static tcp (indoor, outdoor) interface smtp smtp OWL-W2KS-MAIL dns netmask 255.255.255.255 0 0
Access-group outside_access_in in interface outside
inside_access_in access to the interface inside group
Route outside 0.0.0.0 0.0.0.0 80.176.xxx.xxx 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0: CPP 02:00 0:10:00 01:00 h225
H323 timeout 0:05:00 mgcp 0: sip from 05:00 0:30:00 sip_media 0:02:00
Timeout, uauth 0:05:00 absolute
GANYMEDE + Protocol Ganymede + AAA-server
RADIUS Protocol RADIUS AAA server
AAA-server local LOCAL Protocol
Enable http server
http 192.168.1.0 255.255.255.0 inside
http 192.168.1.50 255.255.255.255 inside
No snmp server location
No snmp Server contact
SNMP-Server Community public
No trap to activate snmp Server
enable floodguard
Telnet timeout 5
SSH timeout 5
Console timeout 0
dhcpd address 192.168.1.2 - 192.168.1.254 inside
dhcpd lease 3600
dhcpd ping_timeout 750
dhcpd outside auto_config
Terminal width 80
XXXXXX
: end
All suggestions greatly appreciated
RGS
Colin
Colin,
I'm glad to hear everything is working. On you the question on the CLI or PDM, here's a good explanation of another post recently on the same topic:
To be honest, personally, I prefer to use CLI instead of PDM and usually market SHARE for its surveillance capabilities.
Also please rate/vote for positions that have helped you on your problem this way, others can use the resolution that was displayed.
Thanks and let me know if you need more help.
Jay
-
Server 2003 DC cloning, network goes down?
Hello
I'm trying to clone one of my DC direct (VM) in a DR test environment on our 5 ESX farm.
I know that's not the way to do it if I had to be put live but I'm after is a copy quick and dirty from the domain controller to authenticate that I test upgrades of exchange in an isolated network.
The problem I have is that when I clone the DC networking fails completely. Network status shows 0 bytes sent when the box is rebooted and never changes.
I knew that the problem could hav been corrupted initially Protocol TCP/IP, so I removed and re-installed but without success. I also figured that VMware could change the MAC of the NETWORK card, so I cloned it new and manually assigned the original MAC but it still had no effect.
Has anyone seen what happens before or any idea on how I can solve it?
Kind regards
Ryan
How the look of networking on the clone after you mention? Can you ping address loopback and his own assigned etc IP? What is the answer when you try?
-
Minor scratches on SS 2 series out of the box
I am very happy that my watch stainless steel series 2 has been delivered today! Hope you are all enjoying your. After an inspection of the watch, however, I noticed very slight/minor/extra fine scratches on the screen, mainly on the top and the bottom of the screen where the curve begins, but also a bit in the middle. Once again: scratches are very minimal and is only visible when shine your flashlight of the iPhone (or any other light RAM) directly on the screen and looking closely in some angles. It seems that this has happened during production, probably during some polishing of the watch or other routines (because the stripes are mainly on the curves of the screen and pointing in the same direction). Really in trying to decide what to do about... Some of you SS series 2 owners would be so good to check that out and let me know what your watch in bright light looks like? Once again: it is very difficult to see if you need to use your iPhone light therapy lamp or other direct light source. I read a few threads on the coating that was applied to the screen (also described in the manual). Some suspect that this coating scratches easily, however I think it is strange that the watch is delivered striped out of the box. Especially since this Sapphire screen must be very hard to scratch.
Make an appointment at the Genius Bar in Apple for the service. If you need a Apple Store - find a store - Apple. Take it within 14 days from the date of purchase for Exchange do for a not scratched. We cannot help you here, and these forums aren't complaints because Apple isn't here. We are all of the users like you.
-
Power of the exchange rate in numbers
Hello
I create a Position size in numbers calculator for managing risk in the trading game. More commercial instruments denominated in foreign currencies and to work on what I am risking in Australian dollars, I need exchange rate feed numbers to calculate. Most of the time it would be the rate of exchange between the Australia and the United States. Otherwise, I would have to manually enter the exchange rate.
Is it possible to do, if so how? I guess one would use a site like Yahoo Finance!
Thanks in advance...
Graeme
You can get a rate of Exchange directly in a cell numbers, where a spreadsheet formula can then access elsewhere in the sheet.
Here's a script AppleScript to do this, and uses Ruby to request and return the exchange rate of Yahoo. The hypothesis of the AppleScript is that tell you him what cell you want released in the exchange rate, and you already have the open Numbers worksheet.
Ruby code was borrowed from Github with the assignment of all destinies.
The request to Yahoo returns a CSV table as [[l1, d1, t1, S, b, a]] where just the last trade price is captured (e.g. [1]). You can reference these and other symbols here:
- s = symbol
- L1 = last trade price *.
- D1 = date of the last transaction
- T1 = last trade times
- b = the bid price
- a = asking price
- Start your Script Editor (Launchpad: others: Script Editor)
- Copy and paste the following code in your Script Editor
- Click on the hammer to compile
- Click on the adjustment arrow to run it
- Save a copy of the script as (for example yahoo_exchg.applescript
- Script Editor menu: file: Save...
- Save as: yahoo_exchg
- Location: Documents
- File format: text (this will add .applescript to record under the name of file
- Hide the Extension: unchecked
- Save
- Script Editor menu: file: Save...
- Save another copy of the RL script as an application (e.g. yahooX)
- Option key + Script Editor: File menu: Save under...
- Save as: yahooX
- Location: Office
- File format: Application (.app to yahooX adds)
- Hide the Extension: checked
- Save
- Option key + Script Editor: File menu: Save under...
- Double-click the yahoox on your desktop application.
AppleScript code
--
-You can add to the list, and if you don't choose and click on 'OK', then you will
-be invited to enter the string changes
property exchg_list: {"AUDUSD', 'USDAUD', 'EURUSD', 'TRADER',"GBPUSD","USDGBP"}
the value exchg_select to (choose from the list exchg_list ¬ fast
("Select your Conversion to Exchange" the default items ' ' with an empty selection allowed without selections multiples allowed)
If exchg_select is false number error then -128
If exchg_select is {} then
display the dialog box "Enter symbols of Exchange as fromto (e.g. AUDUSD)" default answer ""-relief if not in the list
new_exchg the value of text, return of result
If new_exchg is not {} and length of new_exchg = 6 then
the value exchg_select to the new_exchg
on the other
Display alert 'Need a pair of Exchange... quit smoking.' give up after 10
return
end if
end if
the value exchg_value to yahoo_exchange (exchg_select) as number
say application "Numbers".
say sheet active of the front document
say table 1
Set myRange to range "A2:A2".
set value of cells of "MaPlage" to exchg_value
end say
end say
end say
return
on yahoo_exchange (astring)
return the shell script "" ruby < < "EOF"-"& astring &".
#! / usr/bin/ruby
# coding: utf-8
# Influenced by https://gist.github.com/captainpete/1639522
require 'csv '.
"EXCHG = ARGV.join '"
# get the exchange rate of Yahoo and return the last trade price
class YahooExchange
# set the default
def self.fetch (code = 'AUDUSA')
CS4L = %x (curl - q s------http://download.finance.yahoo.com/d/quotes.csv?s=#{code} = X & f = sl1d1t1ba & e =.) csv\ ")"
. Flatten CSV.parse (cs4l) [1]
end
end
print YahooExchange.fetch (exchg)
EXPRESSIONS OF FOLKLORE. "
end yahoo_exchange
Maybe you are looking for
-
This would cause the browser to not to answer? I also have a pop up to stop the script.
-
TestStand error when using waveforms
The error I get is attached. I also enclose a labview def type. For somereason, when I have a picture of these clusters in a vi for a custom step type.When I go to the adapter module and you try to assign this table to a stationoverall, I have, whe
-
Can NOR-DAQmx application read a virtual channel with two independent
Two standalone applications OR-DAQmx need to read the same virtual channels of the same material at a different frequency at the same time. Is this possible? Thank you
-
I have an Asus Eee PC disturbed NO disc drive, running Windows Home Starter who came preloaded on the machine. I would like to know if it is possible to make a recovery USB key to be used for "blue screen" types of hardware failure and the need to re
-
I have windows Server 2003 R2, standard edition, in recent weeks its CPU usage showing the use of 100%. While treated cheking, a process called 'System', showing the CPU from 97 to 98%, we have stopped other services one by one like Trendmicro and ba