Exclamation points in Device Manager

Similar Questions

• Code 31 Plug-and-Play software enumerator driver has a yellow exclamation point in Device Manager

  Hello, hope you can help.  XP sp3 Microsoft PNP driver 5.1.2600.0 streamci.dll and pilot 5.3.2600.5512 swenum.sys ESS Maestro 3i Audio Driver 5.12.01.1174.  No sound anywhere.  No sound Windows logon. Yellow exclamation mark in device next to the PNP manager.  In Device Manager, I try to update Pilot PNP and a dialog box ' device does not work because windows cannot load the drivers required for this device. Code 31. "I recently installed a new 256 MB RAM memory.  With the previous installed card 128 MB total RAM memory is now 386 mb.  My system runs faster.  I also bought a drive hard outside with the error "this device is not configured correctly code 1" let Microsoft FIXNOW or I tried a Hdwe installation with an error ' continues could destabilize your system ", I installed anyway.  Hdwe installation of HARD drive included a generic Volume with the same error.  I continued anyway.

  I tried for hours of internet research.  Can you help me

  PS. thought I had a chipset intel on this dell c600.  went intel.com and ran an intel driver update utility program to find what I had drivers.  Results: Intel Chipset Software installation utility (Inf chipset) product detect: no current Version: None

  Hi jojojangle,

  According to the support Web site Dell C600 is only supported in Windows 2000. You can check the link below:http://support.dell.com/support/downloads/devices.aspx?c=us&cs=555&l=en&s=biz&osl=en&SystemID=LAT_PNT_P3C_C600&os=WNT5

  You can try to make back the driver and check if it helps. See the link for the procedure below:

  How to roll back a device driver:http://www.microsoft.com/windowsxp/using/helpandsupport/learnmore/driverrollback.mspx

  For reference: explanation of error codes generated by Device Manager in Windows XP Professional:http://support.microsoft.com/kb/310123

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• MS ISATAP Adapter display, MS ISATAP ADAPT #2 and TEREDO TUNNELING PSEUDO-INTERFACE with exclamation points in Device Manager windows 7

  I don't feel any ill effect of this observation, but this error is new and I would like to know what it generates. Properties for each a watch that he will not start error 10... For now I have disabled all three without any problem so far. I am using Windows 7 32 bit... Thank you.

  Hello

  Thank you for the update on the issue.

  If your computer works fine after disabling the devices that is not recommended by Microsoft, I suggest you try these steps and see if it works for you.

  Step 1:

  Uninstall the device from Device Manager

  • Open the Device Manager
  • Expand the Device section.
  • Find the driver.
  • Click right on the driver and choose Uninstall.
  • Select the check box delete the driver for this device.
  • Restart the computer after the uninstall is complete.

  Step 2:

  Uninstall the drivers of device from the list of programs in the control panel

  • Click Start, select Control Panel
  • Now, click on programs and select programs and features.
  • Find the device driver.
  • Right-click device driver and select Uninstall.
  • Restart the computer after the uninstall is complete.

  Step 3:

  Download and install the latest drivers for the device on the manufacturer's Web site

  Hope that the information provided is useful. Let us know the status of your issue and we will be happy to help you if necessary.

  Kind regards.

• Satellite 4300 video card has an exclamation point in Device Manager

  Hello

  I'm new to computers so bear with me if I do not have much sense.

  on my laptop that he uses only 16 colors, and the screen is very pixelated. When I go to Manager device video controller (vga compatible) has an exclamation mark next to it? When I try to reinstall the driver happens to be unknown.

  does anyone have any ideas where I'm going from here?

  Thank you

  [Edited by: admin on 11 February 06 15:29]

  Hello

  Please visit the download area of driver Toshiba that I try to download the graphics driver from Toshiba. Do not forget that you are using a compatible.
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

• CDDVD exclamation point in Device Manager, it no longer works!

  CD/dvd not wkg.error code 39

  According to the testing of operating system following the steps under "Windows 7 or Windows Vista" or "Windows XP" in the MS KB article:

  http://support.Microsoft.com/kb/982116

  These measures, to remove the UpperFilters and LowerFilters, values if they exist, in the registry key named can help.

  Create a System Restore Point beforehand and restart the computer later.

• Yellow mark points in Device Manager

  * Original title: network problems (yellow questions in Device Manager)

  My dell latitude D520 Windows XP 2002 do not recognize of network, video controller, sm bus controller and video controller (VGA) compatible. Big yellow question mark in the OTHER DEVICES in Device Manager. I put the drive provided for the internet provider, lizzy, but does not work and I have windows wizzard network asks me to insert the disc again and again whenever I put the lap top on. Once done, same message "Cannot find software for this device" ideas? Thank you, joe

  Hello

  1. What is the full error message?

  2. that the CD that is provided by the Internet service provider?

  3 have there been recent changes made on the computer before the show?

  I suggest you to follow the methods below and check if it helps.

  Method 1: Follow the steps in the following articles and check out them.

  How to troubleshoot unknown devices listed in Device Manager in Windows XP

  http://support.Microsoft.com/kb/314464

  To update or change a device driver

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/devmgr_changing_drivers.mspx?mfr=true

  Method 2: Download and install device drivers that are to have a yellow exclamation point in Device Manager and check.

  Driver downloads &

  http://www.Dell.com/support/drivers/us/en/19/product/latitude-D520

  For more information, see the articles and check out them.

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658

  Information about the hardware devices for Windows XP drivers

  http://support.Microsoft.com/kb/319908

  Let us know if it helps!

• two DVD players showing exclamation points in device and code 39 Manager in the properties of the device

  I had problems with some updates do not install in windows update I sent support and after completing several tasks, they determined that I had damaged file system and had me do an upgrade of vista to repair files, after that my DVD players do not work.

  I tried to update windows divers comes back and says best driver is installed performed fix from microsoft to this problem, went to the manufacturer's Web site and do not find here to drive, are two disks, s listed in Device Manager

  Old DVD-rom DVD-106 ATA IDE of Pioneer player

  Lite on IHAS324 SATA DVD burner latest drive

  the two worked before the upgrade

  Hi K Wildt,

  Take a look at this link http://www.pchell.com/hardware/cd_drive_error_code_39.shtml deletion usually upper and lower filters in the registry will bring the CD/DVD online.

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Desktop Experience: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

• Satellite A60-S1591ST: yellow exclamation marks in Device Manager

  Hello

  Recently I formatted C: and installed XP Professional. But after installation, there are several problems.

  First of all, in Device Manager, there are large yellow markings at the SM BUS controller, video controller (VGA Compatible).

  How can I solve them?

  Secondly, when I scroll to the bottom of the sidebar screen to read or see some content down in a certain site, my screen is so sensitive and vague simultaneously with movement or the slamming of the scroll bar. It is associated with above features?

  My laptop is Toshiba Satellite A60-S1591ST, XP pro with SP2

  I do not know how to identify the model of motherboard

  Thanks in advance.

  Hello

  The problem can be solved very quickly the yellow exclamation point appears in the Device Manager, because you didn't install the necessary drivers.

  If you now ask for the driver ;) page Am I wrong?

  Well, it's a Toshiba laptop that so I think ;)
  See this page:
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/Su/su_sc_modSel.jsp

  Choose the Satellite A60-S1591ST and you should get all the drivers.

  Concerning

• Satellite L300 - ODD has exclamation mark in Device Manager

  Please could someone help me with my Satellite L300 laptop?
  It has a pre-installed Pioneer DVD - RW drive, but in Device Manager it has exclamation mark and not show as a CD player and DVD player.

  I tried for days to find the right drivers but no success, it displays as: PIONEER DVD - RW DVRKD08A ATA Device in Device Manager, I am unable to watch DVD s, thank you.

  Remove the device from the list and restart your laptop.
  The problem again?

  What operating system do you use?
  You use your laptop to factory settings?

• Code 31 Plug and Play software Drive enumerator no yellow exclamation mark in Device Manager

  Hello, hope you can help.  XP sp3 Microsoft PNP driver 5.1.2600.0 streamci.dll and pilot 5.3.2600.5512 swenum.sys ESS Maestro 3i Audio Driver 5.12.01.1174.  No sound anywhere.  No sound Windows logon. Yellow exclamation mark in device next to the PNP manager.  In Device Manager, I try to update Pilot PNP and a dialog box ' device does not work because windows cannot load the drivers required for this device. Code 31. "I recently installed a new 256 MB RAM memory.  With the previous installed card 128 MB total RAM memory is now 386 mb.  My system runs faster.  I also bought a drive hard outside with the error "this device is not configured correctly code 1" let Microsoft FIXNOW or I tried a Hdwe installation with an error ' continues could destabilize your system ", I installed anyway.  Hdwe installation of HARD drive included a generic Volume with the same error.  I continued anyway.

  I tried for hours of internet research.  Can you help me?

  You have Windows XP posted a group of win7?

  You need to reinstall / update your drivers for chipset motherboard, either from your PC manufacturers site if a big name PC fixed or portable, if a generic desktop computer, from your motherboard manufacturer.

  Your external problem * may be cured by the chipset driver

• My wireless printer has a yellow exclamation point in devices and printers. How to fix?

  My printer (HP Photosmart c4500) wireless has a feature wireless and when I use my desktop pc (Win7 Ultimate - x 64) to connect it shows a yellow exclamation mark for troubleshooting. When I run the troubleshooting it will prompt you to install the last pilot and fails to do so. So I tried to download the software from the manufacturer and install the drivers in this way but unfortunately I have another error:

  «Windows cannot install HP Photosmart C4500 print driver kernel mode series.»
  To obtain a driver that is compatible with the version of Windows that you are using, contact the manufacturer. »

  Although I have tested on a laptop nearby and had no problem.

  Hello

  Have you made changes on the computer before this problem?
  
  
  Method 1:
  
  Try the steps in the following Microsoft article and check if it helps.
  
  Printer in Windows problems: http://windows.microsoft.com/en-US/windows/help/printer-problems-in-windows
  
  
  Method 2:
  
  Try these steps and see if it helps.

  a. click the start menu > run > type gpedit.msc
  b. under Local computer policy, double-click Computer Configuration.
  c. double-click Administrative Templates, and then double-click Printers.
  d. right-click on Disallow installation of printers using kernel-mode drivers and then click Properties.
  e. on the setting tab, click disabled, and then click OK.

  
  
  Method 3:

  I suggest to uninstall and download and reinstall the printer driver and software from the manufacturing site and check if it helps.

  Uninstall or reinstall a device: http://technet.microsoft.com/en-us/library/cc725782.aspx

  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=3757817&lang=en&cc=us&TaskID=135&prodTypeId=18972&prodSeriesId=3575173

• Satellite A210-1AO: modem are not not in Device Manager

  I bought toshiba Satellite A210-1AO part number: PSAELE-03Q009G3 with Windows Vista Home Premium.
  There are a lot of unwanted software from toshiba (bloatware) and I wanted a clen of OS windows vista installation, so I downloaded all the drivers from toshiba europe web site and update bios version 1.90.

  I installed vista and the driver necessary, video, recorder, bluetooth monitor, flash media... I realized that this modem is not listed, when I try to install modem driver progress bar if poster and work until the end and then disappear but modem is not listed in Device Manager.
  After many tests modem is still not present or detected by the operating system.

  Mention that I have not any exclamation point in Device Manager and all devices are installed.
  I tried to go back to the old State with toshiba recovery cd and's done it without problem but modem is not present in that too much. BIOS does not include an option to turn on or turn off the modem, so I don't know if it's the new 1.90 bios problem or what?
  Else this medication works very well.

  How to activate the modem? modem port is of course present.

  Are you 101% sure that you see the modem in Device Manager?

  I have a 10Y A210 and in Device Manager, the modem is listed below the mouse and other pointing devices.

• Error code 10 updating the Microsoft teredo tunneling adapter driver via Device Manager

  Hi, I have a hp pavillion dv6 with windows 7 64-bit edition. I saw the yellow exclamation point in Device Manager and when I try to update this driver by let me pick up the driver (it says error code 10) or research online (updated driver already installed). What should I do to remove this yellow question mark in Device Manager? Thank you.

  Original title: teredo tunneling adapter microsoft

  Hello Hamdullah,

  Please keep us updated on the status of the issue.

  Please refer to the suggestions of Mohammed Raieed said on January 16, 2010 and check if that helps.
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/Microsoft-Teredo-tunneling-adapter/27162f78-d3b2-4A80-8166-b5596ca9fa11

  I hope this information helps.

  Thank you

• Satellite L300 PSLBGE - unknown device in Device Manager

  Hello!

  I would be very grateful for any help/tips if anyone has an idea what to do...

  My friend has the laptop mentioned above (w/o OS preinstalled) and we can't get the graphics card work properly - situation is the following

  (1) mobile intel 4 series express chipset family, and an unknown device with an exclamation mark in Device Manager
  (2) both are on the same PCI BUS 0, device 2?
  (3) intel does not work because there is no free resources (I should remove the unknown device?) to work with
  (4) HW ID for the unknown device is pci ven_8086 & dev_2A43 and intel pci ven_8086 & dev_2A42 (so basically the same, right?)
  (5) Finally, and most importantly, if I go to the desktop-customize-advanced (first of all no resolution 1280 * 800) I see under adapter type:. Exactly, nothing... under properties, it appears: device not plug and play, Super VGA and under driver, I see just the status and the ability to stop, off, automatic, ask... the device at startup... If I turn it off, the screen just does not shine when the laptop is turned on...
  Any ideas? I'm insaneeeeee...

  Vista Home Premium, all other Toshiba SW installed (value pack, intel BIOS 1.9, etc. - maybe the BIOS did it?)

  Thanks in advance!

  PS maybe SP1 I now install help?

  Hello

  Wait a minute: I checked the Vendor ID and Device ID on www.pcidatabase.com and this is the graphics card Intel. So I think that's the reason why you can t change the resolution of the screen.

  I guess you forgot to install the display driver. See the Web from Toshiba site because here you can download the driver:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  After that you should t have no exclamation point.

  You can install SP1 for Vista, but that does not solve the problem with the missing display driver. But you should install it because it contains a lot of updates to security, they are important. In addition, I recommend to install SP2 for Vista.

  Good bye

• Satellite A350 - NO led WLan, no. WLan in Device Manager

  Hello

  I have the same problem...

  The led does not, not F8 in flash cards, no adapter wifi in Device Manager.
  The problem appeared after being reinstalled system.

  I tried everything (also this thread) and even to try to install the new wifi adapter - same situation takes place.
  When I search on the internet for solutions it apeared that many people had same problem after reinstaled the system.
  Please help :)

  (btw sorry for errors that may appear in this post in English is not my mother tongue ;)

  Post edited by: meraszka

  Hello

  > The problem appeared after being reinstalled system.
  How do you reinstall the operating system?
  Have you used the Toshiba Recovery disk?

  If not then I guess that you have installed the wrong driver WLan

  > no adapter wifi in Device Manager.
  You have a yellow exclamation point in device-> network cards Manager?
  If so, then that would mean that a WLan driver is missing

  I put t know what WLan card you have, but you can find all the drivers here WLan:
  http://APS2.toshiba-tro.de/WLAN/

  PS: make sure that the BIOS is up to date and it has been set to the default settings.