.exe (application) has stopped working

Similar Questions

• On startup, I get the messages that applications have stopped working. One of them is (2nd message) IE3SH application has stopped working. How can I fix it?

  Start-up applications to receive messages from windows that have stopped working. One of them is IE3SH application has stopped working. How can I fix it?

  Hi 9gonz9,

  Welcome to the Microsoft Answers site!

  You get this error message when you start the desktop computer?

  You can check if the complete startup items are checked in the msconfig utility.

  1. open System Configuration by clicking Start , clicking Control Panel, clicking system and security, clicking Administrative Tools, and then double-click the System Configuration.

  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  2. click the Startup tab and check if all the items are archived there.

  You can also run a bag of security for your computer and check if this solves the problem.

  http://www.Microsoft.com/Security_Essentials/

  If the problem persists, turn the computer in clean boot and check if all the background program is causing this error message. To help resolve the error and other messages, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  The steps to perform a clean boot are given below:

  1 log on to the computer using an account with administrator rights

  2. click on start, type msconfig.exe in the start search box and press ENTER to start the System Configuration utility.

  If you are prompted for an administrator password or for confirmation, type your password, or click on continue

  3. on the general tab, click Selective startup, and then clear the check box load startup items. (The check box use the file Boot is not available.)

  4. on the Services tab, click to select the skin all the Microsoft services check box, and then click Disable all

  Note: Following this step lets services Microsoft continue to run. These services include networking, Plug-and-Play, record of events, error reporting, and other services. If you disable these services, you can permanently delete all restore points. Do not do this if you want to use with existing restore points system restore utility

  Once you start the office see if you get the error message. If not then follow the divide and conquer method mentioned in the article below to know which program is causing the problem.

  For more information about the clean boot, follow the below given link:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. click on start, type msconfig.exe in the start search box and press ENTER.

  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  2. on the general tab, click the Normal startup option, and then click OK.

  3. When you are prompted to restart the computer, click on restart

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• "Userinit logon application has stopped working".

  I have Vista Home edition Prem, and be recetnly when I start the computer, the ERROR "Userinit logon application has stopped working".  There is a similar question to this topic, but it was useless.  Assistant would be appriecated.

  Thanks

  Hi Marcosball21

  Welcome to the Microsoft Vista answers Forum!

  This problem occurs if the Userinit key in the Windows registry has been changed. For example, this problem may occur if the Userinit key has a value, but no binary data.

  I suggest measures are:

  Start the computer in safe mode and try to make these changes in the registry:

  Important: The instructions below contain steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information, view the article in the Microsoft Knowledge Base:

  http://support.Microsoft.com/kb/322756

  1. how to back up and restore the registry in Windows

  i. log on the computer as an administrator or by using an account that has administrative permissions.

  II. start the registry editor. To do this, click on start to reduce this top, type regedit in the search box and press ENTER.

  III. click on continue.

  IV. Locate and then click the following registry key: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon

  v. in the right pane, right-click Userinit, then click on modify.

  VI. in the value data box, type drive: \Windows\System32\userinit.exe and then click OK.

  Note The placeholder of the hard drive refers to the drive on which Windows Vista is installed.

  VII. close the registry editor.

  Link check: when you try to log on to a Windows Vista-based computer, briefly, you receive the "Welcome" message, and then logged on http://support.microsoft.com/default.aspx/kb/929825 if you are unable to start the computer in safe mode and then start from the Vista DVD and the Editor window registry opened the command prompt. Follow the steps

  i. Insert the VistaDVD Windows and restart the computer.

  II. When you receive the following message appears, press a key:

  Press any key to start from the CD or DVD.

  III. define the following preferences and then click Next:

  o language to install

  o currency and time formats

  o keyboard or input method

  IV. click on repair your computer and select the operating system you want to repair, and then click Next.

  v. in the recovery option, select command prompt

  VI. in the type of command line in Notepad

  VII. in Notepad, click file, select open

  VIII. Select drive c:

  IX. Select all files

  Select Select regedit Windows x.

  XI. right-click regedit and select open

  Back up the registry and follow step 1

  Hope this information is useful.

  Let me know if it worked.

  All the best!

  Thank you, and in what concerns:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• NService Application has stopped working and was closed to popup on the desktop, when I first boot my computer.

  Original title: NService Application has stopped working and was closed

  Recently, I see this popup on the desktop when I start my computer first – 'NService Application has stopped working and has been closed. "

  What is - this and why I am see?

  Thank you!

  Hi Lee,.

  1. have you made a recent software or hardware changes to the system?

  2. is your system connected to a domain?

  Nservice.exe seems to belong to IBM Lotus Notes / / Domino from IBM.

  Method 1:

  If you use applications such as Lotus, then you can try to uninstall and reinstall to fix the problem.

  Note: Make sure that you have the CD or downloaded installation files to reinstall the program.

  For more information, see the articles:

  Uninstall or change a program

  Install a program

  Method 2:

  Otherwise, you can perform a clean boot and check if that helps.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Note: Make sure that you put the computer to a Normal startup once you have completed troubleshooting.

• LCDRotate64 Application has stopped working - I have windows vista

  Hello

  I received an error message that my LCDRotate 64 application has stopped working.

  I did a full scan with norton and malware.

  I checked the report of problems and he said that the LCDRotate 64 application crashed.  One of the options was to consult a copy of the version, but it could be a risk if there is a virus.

  I don't know what to do?  You happen to know how to solve this problem?

  Thank you!

  Hello

  See if that helps.

  But don't use "Fix my PC" links to 3 third-party sites

  It is apparent from information ti be a HP problem

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and/what-is-LCDRotate64-application/TD-p/1572595

  It says it's a problem of HP.

  http://www.fixdllexe.com/LCDRotate64.exe-447168.html

  See you soon.

• I received an error message after installation encyclopedia British and this application cannot be open.showing the "Startup MFC application has stopped working". How can I solve this problem?

  I received an error message after the installation of Encyclopedia Britannica and this application cannot be open.showing the "Startup MFC application has stopped working". How can I fix this?

  Hello

  always check the compatibility of vista programs on the link below

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

  If a program is compatible with vista you can try right click on the setup.exe and then by selecting run as administrator to install it

  It is not compatible with vista, you can try running it in a previous operating system mode

  This does not work for all programs

  read the information below

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

  ____________________________________________________________

  and read this information MS, too

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-the-program-compatibility-Wizard

• Try to change the mouse settings in Control Panel, receive the error "windows rundll.exe host has stopped working".

  When I go into the control panel to change my settings for the mouse, I get the error "windows rundll.exe host has stopped working", therefore, you cannot change the mouse settings, how do I fix it?  My mouse is out of control! :)

  * original title - why windows will not host rundll.exe I would change my settings of the mouse? *

  Hello

  If you use 3rd party mouse drivers updated or reinstall those who, like Logitech, Microsoft
  Wireless and so on.

  =================================================================

  To solve the problems:

  If your: Windows host process Rundll32 has stopped working
  http://www.WinVistaClub.com/T40.html

  What is rundll32.exe and why it works?
  http://www.howtogeek.com/HOWTO/Windows-Vista/what-is-rundll32exe-and-why-is-it-running/

  What is the suspicious Rundll32.exe process?
  http://WindowsXP.MVPs.org/Rundll32.htm

  -----------------------------------------------------

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
  program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------

  If no joy trying to determine what is the cause:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes without doing anything - then right
  Click on taskbar - task manager - take a look at stored by - Services - process -.
  It's a quick reference (if you have a small box left - show for all users, then
  Check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see who are loading is method 2 - using MSCONFIG then after a
  a list of these here.
  --------------------------------------------------------------------

  Tools that should help you:

  Objects of process Explorer - free - find out what files, registry keys and other processes
  have open, which DLLs they have loaded and more. This exceptionally effective utility will be
  even show you who owns each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured so that it starts automatically when your
  system boots and you log in. Autoruns is also the full list of registry and files
  locations where applications can configure start automatic settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL activity
  in real time.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded
  automatically when Windows starts. For each request, the following information
  appears: product Type of startup (registry/Startup folder), Command - Line String,
  Name, file Version, company name, location in the registry or the file system and more.
  It allows you to easily disable or remove unwanted programs that run in your Windows
  startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not.
  The window Watcher says it all, every window created by all programs that are running, the statement
  If the window is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  Hope these helps.

• "Repair of system application has stopped working".

  Hi, I'm hoping to get help with an error message that suddenly started appearing on a regular basis. In recent days, the following message if poster every time that I turn on my computer, before that I even click on anything whatsoever.

  Repair of system application has stopped working

  
  

  Signature of the problem:

  Problem event name: APPCRASH

  Application name: UpdateMonitor.exe

  Application version: 4.20.729.0

  Application timestamp: 488e9107

  Fault Module name: StackHash_e52f

  Fault Module Version: 0.0.0.0

  Fault Module Timestamp: 00000000

  Exception code: c0000005

  Exception offset: 00000000

  The system version: 6.0.6002.2.2.0.768.3

  Locale ID: 1033

  Additional information 1: e52f

  More information 2: e98dfca8bcf81bc1740adb135579ad53

  Additional information 3: 860f

  Additional information 4: 6eabdd9e0dc94904be3b39a1c0583635

  No matter what I click 'close' or 'check online for a solution (recommended)', the dialog box WILL NOT GO AWAY. I was going to do a system restore, but I have only two restore points and both are from today, so that obviously is not going to help.

  It drives me crazy and I don't know that this is not a good sign for my computer either. Help, please!

  Thanks in advance!

  -Renata

  
  

  Hello

  You use a Lenovo computer?

  updatemonitor.exe is an application of Lenovo.

  I suggest that get you in touch with the manufacturer for a better support.

  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Host of the print driver for 32 bit applications has stopped working (v515w) - cannot print in addition to the test pages

  My printer is Dell v515w Red

  Currently, I can only test pages print.  When I try to print from any other application, I get this error-

  Host of the print driver for 32 bit applications has stopped working

  Signature of the problem:

  Problem event name: APPCRASH

  Application name: splwow64.exe

  Application version: 6.1.7600.16385

  Application timestamp: 4a5bd3ca

  Fault Module name: ntdll.dll

  Fault Module Version: 6.1.7600.16559

  Timestamp of Module error: 4ba9b802

  Exception code: c0000710

  Exception offset: 000000000006e3f9

  OS version: 6.1.7600.2.0.0.768.3

  Locale ID: 1033

  Additional information 1: 3edf

  More information 2: 3edf0feac74021b377b392a0115d74c0

  Additional information 3: bf41

  Additional information 4: bf41409fee27240aa0d3cd0ee9bc9fa9

  I've updated through microsoft and dell and some solutions.

  What is a dell problem or a problem of microsoft?

  My features are-

  Studio Dell XPS 1645, Win7 64 bit, IE8

  extacy1375,

  Unplug the printer.

  Uninstall the printer.

  Restart your computer. Make sure that the printer is deleted. Driver Manual printer removal

  Download 64-bit Vista drivers and save them on your desktop. Install the drivers for Vista 64 bit in compatibility mode.

  Links to the 64 bit Vista drivers are to...

  Wireless printer Dell V515w All In One Printer - owners (RED) wire

  Rick

• Main application MFC Application has stopped working

  I get this error "Hand App MFC Application has stopped working" when I try to use Blaze DTV 6.0 on my computer. How can I resolve that I tried to use this same program on another laptop and it works fine.

  Have you tried right clicking on the shortcut to the program or the .exe and select "Run As Administrator"?

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/default.aspx/KB/929135

  Have you tried to clean your Temp folder, you can do this by typing folder in the Start Menu RUN box.  This will open your Temp folder, there, you can remove all Windows will allow you to do.

  It may be necessary to show both hidden and system files and also uncheck 'Hide known file types' in Control Panel / folder Options / view to navigate to the mentioned location of Temp.

  You can take a look at some of these stories on MFC If you want and think they might have some clues.

  http://www.google.com.au/search?hl=en&rls=com.microsoft%3Aen-au%3AIE-SearchBox&q=mfc+application+has+stopped+working+windows+7&aq=7&aqi=g-c7g2g-c1&aql=&oq=%22MFC+Application+has+stopped+working%22&gs_rfai=

• Host of the print driver for 32 bit applications has stopped working. Why?

  Host of the print driver for 32-bit applications has stopped working msg apear when giving the print on my RICOH printer N/W command. Why?

  * Operating system: Windows 7 64 bit * 32 bits of MS office 2010 * Print driver 64 bit PCL6 * Adobe Acrobat Reader x.

  SPLWOW64.exe event name: BEX64

  Please give a solution.

  Hello

  (1) did you do changes on the computer before this problem?
  (2) what are the types of documents that you are not able to print?
  (3) is the issue limited only with the Microsoft Office program?
   
  Step 1: Test the problem to the boot to check if it is a question of software conflict. A clean boot to check if startup item or services to third-party application is causing this issue.
  Try to install the updates in clean boot mode, and check if the problem still persists.
  You can read the following article to put the computer in a clean boot:
  http://support.Microsoft.com/kb/929135
  Note: After the troubleshooting steps, please refer to clean the boot link to put the computer to normal startup mode.
  Step 2: Download printer driver last OEM
   
  Step 3: Uninstall printer related software l and features

  un) go Panel.

  (b) select Uninstall a program under programs and features.

  (c) click on printer drivers , and then click Uninstall.

  (d) wait until the process of uninstallation is completed, restart the computer.

   
  Step 4: printer installation and driver when prompted then only connect printer and check if it helps.
   
  If the question is limited to Microsoft Office, I suggest to return the items listed below and check to see if they help.

  How to troubleshoot print failures in Word 2010, Word 2007 and Word 2003?

  http://support.Microsoft.com/kb/826845

  How to solve printing problems in Word 2010, Word 2007 or Word 2003?

  http://support.Microsoft.com/kb/826862

  Hope this information helps.
   

• "Application has stopped working" - in windows 7 double started with windows server 2003.

  I did a system to dual-boot with windows server 2003 and windows 7 both 32 bit.

  Server works well, but in windows 7, not a single application as 'MS office', 'Adobe Reader10', "mozzila FF 17', USB modem software etc. can be installed." Application has stopped working-check online for the solution, close the program "-l' display message."

  These applications have been executed successfully on the same windows 7 installed alone, stand not to dual-boot.

  As for example, in the case of Mozilla, I get the following details of problem:

  Signature of the problem:

  Problem event name: APPCRASH

  Name of the application: Installation of Firefox 17.0.1.exe

  Application version: 4.42.0.0

  Application timestamp: 5080c0b6

  Fault Module name: Firefox Setup 17.0.1.exe

  Fault Module Version: 4.42.0.0

  Timestamp of Module error: 5080c0b6

  Exception code: c0000005

  Exception offset: 00029000

  The system version: 6.1.7600.2.0.0.256.1

  Locale ID: 1033

  Additional information 1: c828

  More information 2: c8281d65ef26473d0d73e61539f36991

  3 more information: c4b2

  Additional information 4: c4b2e9bb96fe79d0a8d8b1d891ab6cf4

  These BONES are compatible?

  What is the solution?

  Help, please.

  Thank you...

  Hi Sounak,

  Thank you very much for the detailed information.

  You did changes to the computer before the show?

  The process of installing or uninstalling a program may fail for several reasons. This article describes the following issues (click on each question for corresponding resolution):

  Solve problems with programs that cannot be installed or uninstalled

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  How to solve problems when you install or uninstall programs on a Windows computer

  http://support.Microsoft.com/kb/2438651

  Let us know the result.

• CTXfiHlp MFC Application has stopped working

  A small window opens when I log on Windows 7. The title is "CTXfiHlp MFC Application has stopped working". I close the window, and everything seems to work perfectly. He did this a certain time and I decided to try to find a way to get rid of him. I have given my response above, and perhaps figuratively it's Sound Blaster so I tried to update the drivers, but Windows says they are up-to-date.

  Here is the text of the detail section:

  Signature of the problem:

  Problem event name: APPCRASH

  Application name: Ctxfihlp.exe

  Application version: 6.0.1.1348

  Application timestamp: 4c3473fc

  Fault Module name: ctxfispk. DLL

  Fault Module Version: 6.0.1.1348

  Timestamp of Module error: 4c3473fd

  Exception code: c0000005

  Exception offset: 00003 74 d

  OS version: 6.1.7601.2.1.0.256.1

  Locale ID: 1033

  Additional information 1: 0a9e

  More information 2: 0a9e372d3b4ad19135b953a78882e789

  Additional information 3: 0a9e

  Additional information 4: 0a9e372d3b4ad19135b953a78882e789

  Read our privacy statement online:

  http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409

  If the online privacy statement is not available, please read our offline privacy statement:

  C:\Windows\system32\en-US\erofflps.txt

  Share your Creative Audio/logiciels drivers

  Any update of the driver would be obtained from the hardware manufacturer and not windows update

• Dell 2230 Laser Printer sometimes I get this message: host driver printer for 32 bit applications has stopped working.

  Recently, I started using a new computer - a Dell Precision M6700 with Windows 7. Previously, I used a Dell with Windows XP and had no problems with my printer. Now, I have intermittent problems with get this printer to work. Sometimes it works fine, but sometimes, I get this message:

  Host driver printer for 32 bit applications has stopped working. I clicked so he could find a solution online, and it is never able to find one. I just get another message that says:

  An unknown error occurred while printing.

  Problem event name: APPCRASH
  Application name: splwow64.exe
  Application version: 6.1.760.1.17777

  Do you recognize this problem and is there a solution?

  Hello

  I suggest to go through the steps from the link provided and check.

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Method 2:

  If the problem persists, you can also run a full scan using the Microsoft Safety Scanner and check.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: there is a risk of data loss if all the files are infected and which can be removed in the cleaning process.

  You can also contact Dell to:

  Product support

  http://www.Dell.com/support/troubleshooting/us/en/04/troubleshooting/ProductSelector

  Hope this helps and keep us posted.

• Cannot print the financial dashboard on message of 64 bit windows 7 host computer driver print for 32 bit applications has stopped working

  Original title: Windows 7 print driver host for 32 bit applications has stopped working

  Hello

  In my company, we have a Windows 7 (Professional 64 - bit) computer with installed on financial Edge(32-bit). We have been able to print from this fine machine, but recently we changed a printer of Conan for a Dell 2150cn Color Laser Printer (64-bit driver). Now, when we try to print from financial dashboard, we get the following error:
  Host of the print driver for 32 bit applications has stopped working

  Problem event name: APPCRASH

  Application name: splwow64.exe

  The printer is not a network printer, it is physically connected to the machine. In addition, it seems to print very well, if we are not trying to print from financial dashboard. Unfortunitly, once we try to print from financial dashboard, we cannot print from something else. In addition, financial dashboard can sometimes print (this is rare). I uninstalled and reinstalled, using the drivers that came with the CD (tried to download through the Dell website, but Windows seems to hate this driver)

  Hi IToccrra,

  1. the computer is in a domain environment?

  2. who is the provider of the financial advantage program you're talking about?

  Method 1: Try to print in clean boot

  See the following site:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.microsoft.com/kb/929135.

  Note: to set the computer back to start normally, use the step 7 in the same link.

  Method 2: Run the printer Troubleshooter

  See the following site:

  Open the printer Troubleshooter

  http://windows.microsoft.com/en-us/windows7/Open-the-Printer-troubleshooter.

  Method 3: update the printer driver

  See the following site:

  Updated a hardware driver that is not working properly

  http://windows.microsoft.com/en-US/windows7/Update-a-driver-for-hardware-that-isn ' t-work correctly.

  The details of the error are telling us that the accident occurred when the host of the 32-bit printer driver tries to use the printer. Apparently, you are trying to print from is a 32-bit program, and is not able to use 64-bit print drivers correctly. I would also ask that you contact the vendor of the software (from when you try to print) to check the issue.