exe closes

Similar Questions

• Javaloader.exe closes immediately

  When I try to run javaloader.exe, he opens the cmd prompt but closes immediately. Does anyone have clues as to what is happening?

  Try to run command line so that you can see what is the error reported.

• Cannot install - says "RSO3server.exe close" - Help pls!

  CS5 trial download

  Windows Vista Home Edition

  Installed.

  I start set - up.exe.

  MSG = "Please close the following applications to continue: ' RSO3Server.exe

  I can't find.

  Help!  I need to see Photoshop before my job interview.

  Pls reply to [email protected]

  Near as I can see, RSO3Server.exe is part of the so-called RoboSource Control 3 Adobe (never heard of it; part of RoboHelp maybe)?  Is that what you have installed on your system?  If so, is there a user interface to stop (a control panel, or an icon in the may of system tray)?

  It is an extreme method to make it out of the way...  Bring your task manager.  Don't you see RSO3Server.exe running in the process tab?  If so, right-click on it and finish.

  -Christmas

• A2, exe close button does not

  I publish to an exe file, and I have a page where I want the user to choose between accepting warning & disagree. Agree is easy, I added a button, the success: continue. With no agreement, I want the project to close, then I looked at the code to make a close button that follows typed in the box of javascript "javascript:window.close(). Now, when I click the button it opens Internet Explorer and then displays the following error message: "Internet Explorer cannot download. Unknown error. »
  
  Then I ran through the forums looking for help & I've changed the code javascript to display "Window.Close ()", then "windows.close ()", and again, same error message and the project still does not close.
  
  What Miss me?
  Thank you.

  Hi B Ellefson

  Are sitting you? I hope so because this one is pretty easy.

  Just click Project > Preferences... > Start and End tab and configure the action for when the film ends as "close project". Then, configure this button "Don't agree" to simply jump to the last slide. You may want to even make this last slide really short of a calendar view. Maybe 1 or more seconds.

  With this approach, your. EXE must close quickly, quietly and regularly.

  See you soon... Rick

• Conflict with installing FW CS6: Bridge.exe close but Bridge.exe is not in the taskbar or the Task Manager. Should I uninstall ADOBE CS5?

  Hello

  I have a warning during installation FW CS6 and Photoshop CC: conflict with installing FW CS6: narrow Bridge.exe

  But Bridge.exe is not in the taskbar or the Task Manager.

  Should I uninstall ADOBE CS5?

  Please help me?

  Sincere friendships Marianne

  Hey C-M-H57,.

  Please uninstall CS 5 version using this cleanup tool use the Adobe Creative Cloud cleaning tool to resolve installation problems.

  Restart your computer and install CC Photoshop & other applications using this desktop Adobe Creative Cloud link | Adobe Creative Cloud.

  Let me know if the problem persists.

  Kind regards

  Nicos

• Explorer.exe windows folder keep closing on Alienware X 51 R2 Windows 8.1

  Hello

  My problem is quite simple, but also quite a headache so let me give you a situation of portrait in the simplest of ways:

  Say I open a folder in Explorer windows, the number of files currently opened is not serious it can go from 1 to 15 and still give me the same problem.

  If the folder is open right? I can go and do other things, things... like browsing the net or watch a video. But all of a sudden the closed folder then actually do anything about explorer.exe closes so if I myself copy/move files that would repeal as well. Its as if explorer.exe decides to randomly restart.

  Activities that I do that would trigger such an array of thing of the web browsing on any browser, to the modification of files, simply watching a video, even if a file is opened. Sometimes I think that it still can't do something in particular.

  This question is a big headache and I had this happen with the default software supplied in the Windows 8.1

  My Info:

  PC: Alienware X 51 R2

  OS: Windows 8.1

  GPU: Nvidia GTX 670 & Intel HD 4600

  CPU: i7 4 core 3.4ghz

  RAM: 8 GB

  Any help would be greatly appreciated thanks!

  Please Note: I don't seem to have this problem on Windows 8, I also had installed Windows 7 on the same pc and have not encountered this problem so, maybe something is not especially nice with windows 8.1.

  Hello

  Sorry for taking so long to update this case, I ended up solving this problem, so I'm writing this on a case where someone else has.

  I downloaded a utility called SFCFix from this page:

  www.SevenForums.com/.../325168-System-corruption-SFC-Scan-Won-t-fix-them-all-logs-provided-2.html

  the normal SFC scan could not solve my problem, but this one did. Nevertheless thank you for your help and time of Naomi!

• Satellite P300D - 15 c is very slow to start WMI

  Hello

  My pc (Satellite P300D - 15 c) is very slow at startup.
  When I look in the newspaper, there is a WMI wich tooks 2 minutes East service delivered with an error.

  After that, my pc on the screen fr jumps 'welcom' starts normally.

  So I turn the WMI service, but that there are other mistakes after the full boot (tosipcsrv.exe close).

  Is there another type of solution, except turn the WMI service?

  Sorry for my bad English,
  If you can answer me in Dutch or English basic ;-)
  With sincere friendships.

  Johan Nijsse

  Here's the (Dutch) log of the WMI problem:

  Logboeknaam: Application
  Bron: Microsoft-Windows-WMI
  Reference: 2009-04-06 22:52:53
  Gebeurtenis-id: 10
  Taakcategorie: Geen
  Level: who cares
  Trefwoorden: Klassiek
  Gebruiker: Derby
  Computer: PC_Fam_Nijsse
  Description:
  Gebeurtenisfilter met query SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA 'Win32_Processor' AND TargetInstance.LoadPercentage > 99 kan niet worden van naamruimte //./root/CIMV2 vanwege opnieuw doing 0 x 80041003. Mogelijk worden er geen gebeurtenissen via said thing totdat het clean filter is corners.
  Gebeurtenis-XML:
  
  
  
  10
  0
  2
  0
  0
  0 x 80000000000000
  
  1961
  
  
  Application
  PC_Fam_Nijsse
  
  
  
  ./root/CIMV2
  SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA 'Win32_Processor' AND TargetInstance.LoadPercentage > 99
  0 x 80041003
  
  

  Very good thread on slow start up you will find under http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=134947

  It will be interesting for you.

• Photosmart 7760 installation stops at 7-9%

  7760 received used without the software CD.  Software downloaded from this site.  When I try to install the software, the installation freezes at 7 to 9 percent.  I use the Task Manager to restart the computer.  There is a link to "Fix" associated with this Web site.  There is a section "Installation stops at 7%.  This topic dealing with installation problems associated with Dell laptops; I have a Gateway desktop computer.  The site said to solve the problem, should I open the Task Manager and syntpenh.exe close file and then insert a CD.  Once again, I don't have cd, but have downloaded the software.  Unfortunately, there is no syntpenh.exe on my task manager.  This is the case, say instructions start close everything that is running; This computer warns me when I close something necessary, and that I should not go ahead.  This doesn't seem to be the case.  I close the operations, finally I close something vital and eventually clear the screen.  This requires a stop holding the power on button, which results in a loss complete of what ever I made progress.  All solutions to this, or all go in the trash and buy a Kodak photo printer?

  What operating system are you using, have you tried the Msconfig - disableing all starting on the Startup tab, navigate to services - click Hide all microsoftservices than to click on disable all services. Restart try to install now, don't forget to turn on disabled services and commissioning.

  You're just trying to install base drivers?

• Problem correct launch of sequences shortcut on the desktop file

  I created a shortcut on the desktop that runs successfully a sequence file.  The icon I have chosen was "C:\Program NIUninstaller Instruments\TestStand 3.5\UserInterfaces\Full-Featured\LabVIEW\TestExec.exe".  The problem is the following:

  I have several set up desktop shortcuts to launch multiple sequence files.

  If the operator closes TestStand before closing the current file in the sequence, by activating another shortcut, TestStand opens with the previous sequence file loaded.  The file in the correct sequence is displayed in the ListBox on the left of the screen; However, the file of the previous sequence is loaded.  This will inevitably cause confusion with the operator.

  Any ideas will be appreciated.

  Thanks in advance.

  2 options:

  1. tell the users to close the sequence when they are made by choosing File > close all files of sequence and executions.  TestStand remembers the last sequence which was open.  He re - opens there next time that TestStand gets run.

  2. change the source code of TestExec.exe close the file in sequence on farm.  Or do not remember the open movie file.  If you are using the full user interface, you want to look in the VI called Full UI - configure Application Manager.vi which is called UI - full Initialize.vi.  You will see a property with ReloadSequenceFilesOnStart node.  Change the enum to ReloadFile_All to ReloadFile_None.  Rebuild the exe file, and then deploy it.  You will have to look for it if you use the Simple graphic interface, but it will be the same property node.

  If you go with several it's more work for you, but then you don't have the problem of the operators running the wrong test on WEAR it wrong.  Option 1 is a matter of training.

• I have an old windows vista on comp. (from 2003), I can get a newer version?

  Original title: Windows Vista (former)

  I have an old windows vista on comp. (from 2003), I can get a newer version? I have a metman.exe close. How should I do? In addition, how to find the value of Associations on my computer?  Help, please.

  Hello

  See if that helps you.

  http://Windows.Microsoft.com/en-AU/Windows/change-default-programs#1TC=Windows-Vista

  http://www.TechRepublic.com/article/How-do-i-change-file-extension-associations-in-Windows-Vista/

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Before you try to upgrade to a later operating system (what to buy) read this notice.

  And Microsoft sells more than 7.

  Go to your computer / computer laptop manufacturer Web site and see if Windows 7 drivers are available for your make and model computer / laptop.

  If this is not available, Windows 7 will not properly work for you.

  Run the "Windows 7 Upgrade Advisor.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=20

  Check if your specifications are compatible for Windows 7:

  "Windows 7 system requirements"

  http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

  "Windows 7 Compatibility Center" for software and hardware:

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  Windows 7 upgrade paths:

  http://TechNet.Microsoft.com/en-us/library/dd772579 (v = ws.10) .aspx

  «Installation and reinstallation of Windows 7»

  http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Do the following before upgrade you to Windows 8.1.

  Check if the manufacturer of your computer/laptop has Windows 8 drivers available for your model.

  If this is not available, Windows 8/8.1 not install and work properly for you.

  There is a lot of information in this first link from Microsoft:

  Download and run the Windows Upgrade Assistant 8.1 of to see if your machine is compatible Windows 8.1 and read the update for Windows 8.1: FAQ here

  :

  http://Windows.Microsoft.com/en-us/Windows-8/upgrade-to-Windows-8

  "8.1 for Windows system requirements.

  http://Windows.Microsoft.com/en-us/Windows-8/system-requirements

  @@@@@@@@@@@@@@@@@@@@@@@@@@@

  Microsoft on Monday said CNET Windows 10 will cost just as much as its predecessor. This means price for Windows 10 will run anywhere from $110 for Windows 10 Home package at $199 for Windows 10 Pro edition. In addition a Pack Pro 10 will allow users upgrade Home Pro for $99.

  http://www.CNET.com/news/Microsoft-prices-single-Windows-10-licenses-at-119-for-home-199-for-Pro/

  But first make sure that you have the correct configuration and your computer manufacturer provides the right drivers for 10.

  https://www.Microsoft.com/en-us/Windows/Windows-10-specifications#sysreqs

  @@@@@@@@@@@@@@@@@@@@@@@@@

  And to Metman.exe:

  "How easy to clean an infected computer (malware removal Guide).

  https://malwaretips.com/blogs/malware-removal-Guide-for-Windows/

  See you soon.

• 0xC000021A {fatal system error}, the initial session process or the process of the complete system in unexpected ways with the blocking state 0 x 00000000 (0xc0000034 0x001008ac) the system has been halted

  Hello! I got this message from malware (I clicked to delete) in surfing on firefox and after awhile the explorer.exe closes with an error. I try to open the Task Manager and it says explore cannot be found!
  I rebooted and then I got this message "0xC000021A {fatal system error}, the initial session process or the process of the complete system in unexpected ways with the blocking state 0 x 00000000 (0xc0000034 0x001008ac) the system has been halted" and can't get anywhere.
  I can't even go in safe mode, the same error messages appears.

  Hi James,

  You could try the Startup Repair to see if it solves the problem:

  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Can't see the new table in the PS Group Manager

  Sorry guys, I'm kinda new to storage management. I worked in existing bays built by the last person who was here. Now that he is gone, I was charged with the addition of two additional paintings/members to our existing EqualLogics. Problem is that I see the 2 members in Group Manager, but not the 2 new ones. We have a data center managed by 3rd party and they say that they have wired everything in. Both are supposed to be cross-connected series via a connection to one of our servers and the other in an existing table. Now physically I don't know how everything is connected. I console just in Workgroup Manager. I don't see new members there. I tried to connect from one of the servers connected using PuTTY and the connection series. I've used sides of Baud has offered online. But I can't connect what either. Sorry if this sounds very basic - but what don't get me? How to see these devices to even configure the network adapters and RAID?

  Thanks for any help guys

  Hmm... what exactly do you mean with "the table is connected to the active controller?

  Guys in your data center can make the photo of the back of the EQL? See the two CMs with the cables and the LEDS may help.

  When putty.exe close the window immediately that there is probably nothing on the other end, but when it remains open, it is normally a good sign. Press 'enter' or ctrl + c. If you see garbage or nothing the connection parameters doesn't match. Once again its 9600/8/1/n.

  Note: if ever you restart an active EQL the CM moves which makes it difficult when with only a working serial cable.

  You can also try is turning off the device. Verify that your connection to the CM right and turn on again. You will see output of a CM of start-up.

  Do not use is not a black font on a black background in putty also makes life easier ;)

  Kind regards

  Joerg

• Cannot install the flash that is low then the worm. 11

  Hello

  IM using windows xp 32 bit, IE 9. I have adobe flash ver 11.

  I need to install ver 10 because there is a site that I need to use the the 11 worm does well with it.

  whenever it sorts to intall a lower worm then the 11it tells me that his is not the most recent worm and that I can't install and I need to install the most recent version

  Help, please.

  Thank you.

  magafaim wrote:

  Hello

  IM using windows xp 32 bit, IE 9. I have adobe flash ver 11.

  I need to install ver 10 because there is a site that I need to use the the 11 worm does well with it.

  whenever it sorts to intall a lower worm then the 11it tells me that his is not the most recent worm and that I can't install and I need to install the most recent version

  Help, please.

  Thank you.

  IE9 is not supported on Windows XP, so I guess it's IE8 that you use.

  You will need to uninstall the current version before you can downgrade. Download uninstaller from here: http://download.macromedia.com/pub/flashplayer/current/uninstall_flash_player_32bit.exe close before you run IE the program uninstall and restart.

  You can download an older version of Flash from here, but to Save , do not choose to run: http://kb2.adobe.com/cps/142/tn_14266.html IE close before start you.

• A new appreas to window with "firefox.exe has encountered a problem, you must close...". "'Send report' 'do not send report '.

  While browsing with firefox Mozila, sometimes in a minute or 2/3 a new window appears "Firefox.exe has encluntered a problem, you must close...» "' Don't send lAs line"Send report""do not send report", tap on" close firefox window.

  Troubleshooting extensions and themes

  • https://support.Mozilla.com/en-us/KB/troubleshooting%20extensions%20and%20themes

  Check and tell if its working.

• Issue of games - exe has encountered a problem and needs to close

  Hello world

  I was wondering if there was someone out there who could help me.

  I can load a game on my laptop (demanding nothing, just football coach) but when I then open the game when loading I get the following message

  "(whatever_the_game_is).exe has encountered a problem and needs to close." We are sorry for the inconvience.

  Can anyone recommend a way to resolve this?

  Thanks in advance

  Rich

  Hi Rich

  Using original or copy?