Existing LUN on the second card CF

Similar Questions

• Non-visible LUNs to the second esx Server

  Hi, I have two HP G4p esx 3.5 servers attached to an MSA1000 with a hub via the emulex fibre FCs I had created two LUNS on the MSA with the ACU. One esx server sees the two LUNS created but the other cannot see the LUNS even after doing a rescan. Sometimes when making him analyze again the VI is suspended. I have obsereved both esx servers to see two different WWPN pointing to two different targets. I want both esx servers to see the same LUNS shared so I could run somewhat your since I'm new to vmware technology. I enclose a snapshot that I think could someone out there with the possible workaround to the issue.

  Thank you

  I agree with other posters - make sure your zoning is correct on the FC switch and also ensure that you have checked boxes correct and applied, in the selective presentation of storage (SSP) within the ACU. If this is all OK, a new scan of the storage should display the logical unit number.

  You're talking about the different WWPN is the Emulex HBA on their respective hosts.

  Post edited by: java_cat33 - Note about WWPN

• Change of strategy by default multichannel in ESXi 5.0 has no effect to the existing LUN

  Hello.

  HISTORY:

  We have several hosts with ESXi 5.0 connected (via zFCP) to SAN (a Clariion CX3 and CX4 a) 2.

  After installing ESXi (a few months ago), we've changed the strategy of multiple paths by DEFAULT to RoundRobin for both CLARiiON systems, but NOW we wan to return the default policy for the CX3 on MRU leaving the default policy for the CX4 as RoundRobin.

  * Cause CX3 is not compatible with ALUA but CX4 is, we simply changed to MRU the DEFAULT policy for the Type of array VMW_SATP_CX storage only.

  We executed the following command:

  esxcli storage set - default-psp VMW_PSP_RR - ATAS VMW_SATP_CX ATAS nmp

  After that, we restarted the ESXi to "activate" the changes.

  THE PROBLEM:

  After the reboot, surprisingly existing LUNS of the CX3 continue to use the RoundRobin policy, even if the Type of storage array appears in the form VMW_SATP_CX and the command 'esxcli storage nmp ATAS list' shows that VMW_SATP_CX now use MRU as the default policy.

  I manually changed the policy for some LUNS of RoundRobin on MRU and then restarted the ESXi and change persists for those LUNS (using MRU rather RoundRobin) but the rest of the LUNS continue to use RoundRobin.

  Also, I created a * NEW * LUN in the CX3 and the ESXi it displays correctly (using MRU rather RoundRobin).

  THE QUESTION:

  So... to change the DEFAULT policy with esxcli is useless for the existing LUN and I have to manually change EACH CX3 LUN to SRM strategy to complete the process?

  .. .or maybe I forgot any action a step further?

  Kind regards.

  THE QUESTION:

  So... to change the DEFAULT policy with esxcli is useless for the existing LUN and I have to manually change EACH CX3 LUN to SRM strategy to complete the process?

  .. .or maybe I forgot any action a step further?

  It's true... Change the default PSP will affect any new LUNS added.  Your existing LUN needs to be changed

• Dual graph: the 2nd card slow down the bad

  I have a Mid 2010 Mac pro 2.8 ghz Quad Core with 32 GB of RAM, running two monitors and running a chart double installation with two cards identical to 7950 / 3 GB AMD Radeon HD. I have the cards for two monitors. 1 monitor is connected with a DVI - I cable. The second monitor is older with just VGA connections for what will a VGA cable with a DVI - I adapter.  To using each card to power each monitors is probably the problem but there may be a fix on the forum somone help me to implement. Basically, the second map dragging. The mouse jumps and does not respond well to the movement and when I run FCPX GAL of the entire screen. Clicks are delayed and the mouse movement is delayed.

  When moving to the second screen powered by the second card, all is well and that responded to the questionnaire. Things get really tough, if I run Geeks3D GPUTest GUI 0.6.1. Dragging graphics screams like crazy. Looks like the fan is going to come off. I'm running a TessMark X 64 (OpenGL 4) trial to full screen, no software rendering to 7680 x 1440 resolution and anti-aliasing on 8 X MSAA. The generated images are beautiful and not fall a framework, but the sounds of the map are horrible. The exercise test and reference. All have solutions? Is it easy to replace the fan? How can I eliminate the LAG and drag? Or is this card about to die?

  If any screen has a DisplayPort input, it certainly is the connection of choice. It puts less stress on the maps, because it displays DisplayPort have an internal buffer and the 60 Hz "heartbeat" screen redraw is reduced to mainly the changes. This reduces interruptions on the cards and allows them to calculate at full speed.

  Dual display software on Mac OS X is probably "all set to the top" for the end of 2013 Mac Pro configuration, which reserves the second GPU intensive calculation only.  NO display on the second card.

  Problems of tracking mouse are associated with computers whose CPUs are completely absorbed with a high-performance computing. Have you looked into other performance issues? You have enough RAM? are your processors topping out?

• additional NIC connected to the second router interface does not have IP

  Hi I have an esxi5 running on the hp with two physical NICs micro server that is visible on esxi as vmnic0 and vmnic1. Initially, I was working with vmnic0 as a main network as the interface of management and also VM NIC that is connected to my internet. No problem here. Now, I plugged the second card which is represented as vmnic1 to another router in my house that has its own separate subnet by wire of physics. This second router has its own Dhcp and set up correctly as I connect my mobile phone and tablet that and gets its ip DHCP server. However vmnic1 receives not all IP address. Here is the configuration:

  Phys. netcard vmnic0 192.168.1.254 (obtained from internet router ip) no problems, related to the management network vSwitch0

  Phys. netcard vmnic1? any IP connected to separate vSwitch2, physical network is connected to the router with DHCP with the range 10.0.1.2 10.0.1.1 - 10.0.1.100

  To debug effort, I imported vmnic1 in the virtual machine running on that ESXi and static ip address assigned 10.0.1.101, whereas it falls in the same subnet as the second router and tried to ping router (10.0.1.1) however got "destination unreachable". Obviously ping can't the second router.

  So my question is why? Can anyone help on this?

  I put below the esxi Network Setup:

  Thank you!

  I just pointed it arbitrarily when I created vSwitch2, does not interfere the vSwitch0. 2nd router lacks any setting of vlan.  Should not do and leave the vlan by default? Thank you

• Update settings prevented the second office "an account with that name already exists...". »

  My provider has modernized and forces me to change the server settings. I did this successfully on a desktop computer and now I want to do this on the second and the third office where I want my accounts available e-mail.

  When I try, I get a window of the wizard account saying "an account with that name already exists. Please enter a different account name. "And I'm prevented from doing the settings made on the second Desktop server.

  How do I get around this?

  Thank you,
  DJBrewster

  Open the configuration editor and search for entries with this name

  There should be two entries with mail.server.serverXX.name (where XX is a number.) change on them and try and change the setting again.

• I deleted two e-mail accounts in my iMac (El Capitan). I have reinstalled the first without problem. When I tried the second, I got an error message that the account already exists. Any suggestions?

  I deleted two e-mail accounts in mail on my iMac (El Capitan). I have reinstalled the first without problem. When I tried the second, I got an error message that the account already exists. Any suggestions?

  First of all, make sure that you don't have two accounts with the same address. What happens if one of them is an iCloud account.

  From the Mail menu bar, you select

  ▹ Connection Doctor window

  In the window that opens, look for an SMTP (outgoing mail) account with a name that corresponds to the account that you are trying to add. Double-click it. Another window opens, displaying the list of all outgoing mail accounts. Click the sign button less to remove the corresponding one, and then click OK.

  Try to add the email account again. If you still can not, log off or restart the computer, and then open the preferences window accounts Internet and check if the account is displayed.

• Is the second graphics card for lenovo Y510p out forever?

  I just bought my new laptop Y510p but I expect to buy second card to complete the system for the games, but I learned that the new card is out of stock. Does this mean I'm stuck with the single graphics card forever? : (I no option to update my graphics card for newer games?

  Here is the link, check it out yourself

  http://shop.Lenovo.com/SEUILibrary/controller/e/Web/LenovoPortal/en_US/catalog.workflow:item.detail?...

• IMAQdx mind traffic on the second NETWORK card

  Hello!

  My system:

  -Labview 2011 SP1 with NO Vision and IMAQdx

  -Windows 7-32 bit

  -2 NICs (Intel Pro 1000)

  On a NIC (subnet: 192.168.0.x - Intel pro driver) a sick Ranger is connected. Store it works with Studio of sick Ranger or the Labview Toolkit Ranger.

  On the second NIC (subnet: 192.168.1.x - Realtek dreiver) a Vision of Basler GigE camera is connected. It works with the grun80 pylon Viewer and IMAQdx GigE functions in Labview.

  If I start the acquisition of two cameras using the Studio store and Basler pylon Viewer (no Labview) both cameras acquire images at high speed without any interference.

  If I use Studio Ranger or LV-store Toolkit for the Acquisition of store it works selection UNTIL I have start a Labview VI containing the screw IMAQdx to acquire images of the Basler camera. As soon as the VI performs stops Acquisition of Ranger and Ranger loses the connection.

  I guess the driver IMAQdx is somehow interfering with two network cards.

  Suggestions how to exclude one of the NICs of IMAQdx driver or can someone tell me what is happening on the network driver layer when loading of IMAQdx?

  The purpose of my request to LV, is that both cameras can be used at the same time!

  Thank you!

  Disable the identification of cams network solve the problem?  See also How to disable IMAQdx sending periodically a Ping 'discovery'.

• The second image lost in CAN communication when use card NI PCI-CAN/XS2

  I recently had a problem on CAN communication.

  I need commmunicate a Cluster with CAN BUS, baud rate is 500 Kbps, the BOX is card NI PCI-CAN/XS2. The operating system is Windows XP.

  normally, the PC send a Cluster command, then reread a frame of data of the Cluster, but for some controls, the Cluster will return two data frames, and the program on PC cannot receive the second frame, he lost.

  I searched the forum, most of her results is the overflow of CAN BUS error, which make the CAN setting lost, but there is not an error on my program report and baud rate is not that fast, I also use another port of the NI PCI-CAN/XS2 to monitor the bus CAN, the second frame of data never appear When I can replace NI CAN map vector CanCaseXL (CAN card) and call of CanCaseXL DLLS in labVIEW, it can get the second CAN fit, the vector CanCaseXL monitor can get the second image data also.

  Yes, is there a software/hardware configuration must be done to get the second block of data?

  the attached photos are NOR-CAN/vector ALLOWS to follow and CAN init/write & read in my program.

  Any reply is appreciate! Thank you

  Hello iwantofly014,

  I don't know that the framework is not lost.

  Could you post your code?  In particular the data Get VI?

  Also, can you make an indicator of the output of the ncReadNetMult?

  It seems you are trying to implement the UDS and KWP2000 Protocol.  Is this possible?  We have a product that already implements these two protocols and really simplify this type of application.  Its called the Automotive Diagnostic command set.

  Have a great day.

• HP 20-r013w: computer does not start if a memory card is inserted in the second take of DDR3 SODIMM 204 pins

  My computer has 4 GB of RAM installed, but in the manual said I could upgrade to 8 GB. There are two jacks for memory cards for this model. When I checked there is a memory card of 4 GB installed in one of the (black color) and the second (white) were empty. So, I bought a second card 4 GB memory: 4 GB Crucial single DDR3 1600 MT/s (PC3-12800) CL11 SODIMM 204 pins 1.35V/1.5V Notebook Memory Module CT51264BF160B that has the required parameters. Today I received the card and tried to place it in the second take (white) and then the computer does not restart. The same thing happens if the original of the memory card is inserted into the white Jack. There is no sound when I tried to launch the screen of the computer in black only. At the same time, both cards operate perfectly if located to the black Terminal. Is there something wrong with the second take, or should I do something before placing a card inside. Thank you!

  I'm sorry I did not solve your problem.  To my knowledge there is no setting that can be changed to allow the second slot working correctly.  As the computer is still under warranty, I suggest contacting the seller for help.  They should help you to solve the problem.

• How can I move the outlook express emails from an XP PC to an another XP PC that has the same e-mail address without overwriting existing messages on this second PC?

  How can I move the outlook express emails from an XP PC to an another XP PC that has the same e-mail address without overwriting existing messages on this second PC?

  I need to group together all messages from e-mail in a PC and to retire the first PC.

  This could be problematic. I guess or OE is over? This would make it easy.
   
  One thing you could do requires some manual work, but much less removal of dupes. For example, the Inbox. In the machine, you are going to scrap, create a new folder and move all messages in your Inbox to it. After you import on the other machine, you can drag the messages you need this folder in the Inbox, and then remove the user created the folder.
   
  And then there are tools to remove the dupes. This one for example.
   
  OEX
  http://www.oehelp.com/Oex/default.aspx 
  
   
   

• Failed to load existing records from the database on SD card during initialization of the application

  When the Simulator is launched upward, not able to load existing records from the database in the Inbox, so no records appear in the Inbox even though they exist in the database. It seems to be a problem with the SD card in the Simulator - the file system for the SD card is not correctly initialized when the application starts first to the top. During initialization of the application tries to access the SD card by using the following code.

  Boolean

  sdCardPresent = false;

  Enumeration e = FileSystemRegistry.listRoots ();

  If

  (e! = null) { }

  While (e.hasMoreElements ()) {}

  root = (String) e.nextElement ();

  If

  (root.equalsIgnoreCase("SDCard/")) {

  sdCardPresent =

  true;

  }

  }

  }

  sdCardPresent is always set to false and was not able to access existing records from the database. Once the application is initialized and try to create the database, the database is created successfully on the SD card.  The code is the same as above when creating the database and was able to do sdCardPresent = true.

  Is there anyway to register or add the SD card during initialization of the application or any property as System.setProperty overide the path of the default directory value?

  I use BlackBerry 9550 Simulator. I checked the "file system using PC for files from the SD card" and I use "C:\bb\SDCard" for the file system of thr.

  Also tested on the BlackBerry and found the same thing, if the device is hard reset, then it not reading the SD card as well.

  Mark the thread as solved then.

• CMS OVA, adding the second NETWORK card breaks the first NETWORK card

  I'm testing CMS 2.0 and when I try to add a second NETWORK card in VMware, he immediately interrupts the first network card.  As soon as the loading of the image, the first NIC fails.  Even if I disable iface b, it will allow all traffic where iface one.  If I stop the application, remove the NETWORK adapter and run it back again, it works very well to the iface one.

  I want to test the public face with box feature, but I can't if I can't add a second network card.

  How do you add the second network interface and interface you add?

  You should add 'VMXNET3' type if you use VMWare, if you chose something else, you invalidate your license, see section 3.3 of the virtualized CMS 2.0 Setup Guide for deployments.

  If you need assistance, you must move this thread to the section of telepresence of forums, where this device is actively discussed.  You can change your question and change the categories at the bottom of the page.

• Problem with the second red card

  Hola, the sober consultar queria a problem that I am having in el con host the second red card.

  Tengo UN esxi 5 desde hace one wont by Dias y estoy beginning an armar una pequeña infrastructure virtual, en el host estoy necesitando una segunda tarjeta red are only in el mismo voy a put a device that makes a kind of proxy, por lo Québec Necesito tener tarjetas UN 2 red, pero el just greet me detecta to edge.

  Don't probe change the tarjeta por otras pero no reconoce la, son todas tarjetas genericas estan bullfighting in the list of compatibility than por eso por no haber problemas should.

  He buscado in documentation pero las cosas as he found me None ha sido of utility.

  The found a worm if me can perform o algo a prueba alguna indicate that me can help con el problema.

  MUCHAS gracias!

  Hola Matias,

  If going to a network adapters appears todas las NIC?

  A greeting.

  Sent from my iPhone