Export plugins are in the Manager, but not to export to

Similar Questions

• Gamepad Xbox 360 as seen in "Device Manager", but not recognized as "Game controller" and will not be installed all the drivers

  My problem is very similar to the one raised here:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-gaming/Xbox-360-controller-seen-in-Device-Manager-but-not/fcf52151-604e-4BF3-BF55-2fa4930bc415
  However, the OP in this question unfortunately never had answer to his question.
  When I plug my Xbox 360 controller on my laptop, my computer recognizes it as a device, but does not recognize it as a game controller. Instead, my device is listed under a category called "Other devices", and the drivers are not installed (he gets the little warning sign yellow after the icon).
  I tried to install the correct 'Microsoft Xbox 360 accessories' (http://www.microsoft.com/hardware/en-us/d/xbox-360-controller-for-windows (Windows 7 64-bit)) and direct the machine to install its drivers from there, but nothing helps.
  I've tried right-clicking on the device, by clicking 'Uninstall', out in him plugging, uninstalling and reinstalling Microsoft Xbox 360 accessories, restarted my computer and each unique combination of these things.
  I tried to talk to an Ambassador of Microsoft, who told me to update the driver and manually make a 'human interaction device', but unfortunately it did not work.
  I called Support of Windows games, who gave me information from these links:
  support.Microsoft.com/kb/908888
  support.Microsoft.com/kb/906347
  Outside of download the drivers manually in the form of 'Microsoft Xbox 360 accessories' (which I already have), I wasn't able to try all of the hotfixes listed in the guides, because my camera is not listed as a joypad or human interface device. It is simply listed as "Xbox 360 Joypad" and it is listed under the heading "other devices."
  It seems that there is just something wrong with my USB and it's just is not installing drivers properly, but this isn't the case. I plugged many other devices, including an iPod, a mouse and an external HARD drive, which all had their drivers properly installed and works great.
  I also know that it is not a problem with the xbox controller, that I plugged into another laptop (also Windows 7 64-bit), as well as pilots very well on the other laptop.
  I'm really puzzled by this situation. Any help would be greatly appreciated, but please do not repeat the information or links I listed here, or who was in the last question which I quoted above. Thank you for your help.

  UPDATE: I finally got to work. Everything is beautifully detailed in this video from Youtube:

  http://www.YouTube.com/watch?v=kxa5CJsDzwQ
  Here's what you do:
  1. plug your device and go to Device Manager
  2 right click on everything that your computer recognizes your device as (for me, it was listed under 'Other devices' and had a yellow warning sign on this subject) and click on "Uninstall".
  3. disconnect your device
  4. If you have not already done so, download and install the appropriate for your device 'Microsoft Xbox 360 accessories' program
  5. plug your device back on and go back to Device Manager
  6 right-click on everything that your computer recognizes your device as (for me, it was listed under 'Other devices' and had a yellow warning sign on this subject), but this time click on "update driver software".
  7. click on "browse computer driver software.
  8. click on "Let Me pick from a list of drivers for devices on my computer.
  9. Select "Microsoft Common Controller" and then select your device. Have it install this driver. From there on, it should work on.
  If you have any questions, my email is * address email is removed from the privacy *.

• HARD drive secondary, detected in peripheral & BIOS Manager but not in the W7 Explorer

  Subject to HARD drive is detected in the BIOS and Device Manager but not in Explorer Windows.

  Problem is with a single internal partition 2 TB HARD drive that was installed six months ago.
  Since its installation, topic drive HARD has been successfully used for backups of W7.
  Problem started occurring two days before without changing hardware or software.
  There is no error message.
  Several cold reboots, change the data cable and done SATA ports fails.
  Idems for update and uninstall driver followed with reset.

  The system is Windows 7 Pro x 64 with 20Gg RAM and only partition 2 Tb drive HARD primary and 2 TB of HARD drive.

  Thanks a lot for your help.  :-)

  Test your player - create a Bootable CD:
  Ranging from 5 to 20% (depending on the manufacturing) new hard disks are defective.
  Test your drive with the car manufacture utility.
  If you have a new hard drive Seagate the very next thing would be to download Seagate Seatools
  (bootable CD) and check bad sectors.
  SeaTools for information: http://www.seagate.com/support/downloads/seatools/
  SeaTools for Windows download: http://www.seagate.com/support/internal-hard-drives/enterprise-hard-drives/saturn/seatools-win-master/
  SeaTools for DOS download:
  http://www.Seagate.com/support/internal-hard-drives/consumer-electronics/LD25-series/SeaTools-DOS-master/

  For Western Digital readers to download the .iso from WdDiag file: http://support.wdc.com/product/download.asp?groupid=611&sid=30&lang=en

  Samsung Estool: http://www.samsung.com/global/business/hdd/support/utilities/ES_Tool.html
  Samsung Disk Manager software: http://www.samsung.com/Products/HardDiskDrive/utilities/shdiag.htm
  Hitachi Drive Fitness Test Software: http://www.hgst.com/hdd/support/download.htm#DFT
  Diagnostic tool available for use by customers who feel their Toshiba brand Fujitsu hard drive:
  http://SDD.Toshiba.com/main.aspx?path=ServicesandSupport/WarrantySupport/SoftwareUtilities
  Notice of suport Fujitsu disk utility: http://www.fujitsu.com/us/services/computing/storage/hdd/
  Toshiba CD bootable: (BACK Diagnostic Tool version 7.0 for IDE/ATA/SATA hard disks)
  http://SDD.Toshiba.com/main.aspx?path=ServicesSupport/FujitsuDrivesUSandCanada/SoftwareUtilities#diagnostic

  J W Stuart: http://www.pagestart.com

• I created show and hide features in InDesign I want to export to interactive PDF format. These functions work when seen in Acrobat on the desktop, but not on iPad/Tablet - why?

  I created show and hide features in InDesign I want to export to interactive PDF format. These functions work when seen in Acrobat on the desktop, but not on iPad/Tablet - why?

  Why? Most likely because the PDF Viewer on the Tablet is too stupid to deal with show/hide functionality.

  You could try PDF Expert of Readdle on qpdf Notes Pro on Android and iOS devices.

  Depending on how the show/hide was created during the export of InDesign, it can work in viewers. Otherwise, you will need to open PDF files in Acrobat and edit features show/hide something more digests of PDF device viewers.

  BTW, you will encounter the same issues with the PDF display components in web browsers.

  I hope this can help.

• Open a new file in photoshopcc and the name of the file is displayed but no Web white work. You can see it as a layer in the layers panel and if I pull on the grey area I see int on the layer, but not on the main screen.

  Open a new file in photoshop cc and the name of the file is displayed but no Web white work. You can see it as a layer in the layers panel and if I pull on the grey area I see int on the layer, but not on the main screen.

  Nice day!

  Could you please post a screenshot with the relevant panels visible?

  Not turning off"use graphics processor" in the Performance preference and restarting Photoshop have a bearing on the issue.

  Kind regards

  Pfaffenbichler

• Satellite A50-109: manages the CD but not DVD player

  Hello

  I write from Türkiye.
  I have a problem on dvd rom. My dvd - rom can open the CD but not open DVD.
  What can be the problem? Can you help me please?

  Thank you very much right now...

  Sorry, but your ad does not give us enough information for a better understanding of the problem. You mean what DVD? You write about the original DVD movies or some created cottages, films, copies or what?

  Please test with different content (movies, the saved files and so on) and let us know exactly what is happening.

• Devices to connect to the airport, but not to the Internet

  Hi all; Here's my situation:

  I just bought a new Airport Extreme to replace my old router (Linksys). In our House, we have two iPhones 6, as well as the iPad, Apple TV and MacBook Pro that were all bought again this year. All these things were able to connect to the internet using our old wireless router.

  As I have configured and installed at the airport, various devices have been able to connect without being able to connect to the internet (i.e. AirPort Utility, the airport connection is a green dot, while the actual internet connection is an orange): first it was the MacBook having this problem while the phones and the iPad have been completely connected. After I simply rebooted everything several times - i.e. the modem, router, and MacBook - I finally got the MacBook fully connected (without really changing all the settings, which are all entered correctly). Now, however, it is the two iPhones that will connect the airport but not actually in the internet.

  Any ideas? I must say, these strange little problems idiopathic who seem to always pop up with Apple products are starting to really bother me... I never got my MacBook to connect to the Apple TV via AirPlay.

  Any time you change the material or providers of Internet services, networking, it's always a good idea to perform a complete recycling of your network equipment power. Check out the following Tip of an airport users for more details on how to do it. Please post back your results.

• Lost my icon to send new messages in mail (appears in the toolbar, but not active). Can not send a new message in the drop-down list box. Any ideas on how to solve this problem? I tried to use the toolbar Customize to drag an icon to the toolbar.

  Lost my icon to send new messages in mail (appears in the toolbar, but not active). Can not send a new message in the mailbox (impossible to select) drop.  I tried to use the toolbar Customize to drag an icon to the toolbar, but it doesn't work anymore. Using Mail 9.2 and OS X 10.11.2.  Any help is appreciated.

  The Send button will not be activated unless the message can be sent. Are you sure that you have entered a recipient and the account is online?

  The connection doctor (window menu) displays errors.

• Can print the attachments, but not emails

  On my Macbook, I use [email protected] for email and print issues. I can print the attachments, but if I try to print an e-mail the preview screen is empty, so nothing is printed. A blank page comes out of the printer - Deskjet F2280 all-in-one. It used to work very well so do not know what I did to upset the software.

  Hi MoBoot,

  Welcome to the HP Forums!

  I understand that you can not print e-mails with your Deskjet F2280 and I'm happy to help you with this printing problem!

  Since you are able to print the attachments, but not emails from your account [email protected], I recommend you contact Microsoft Support.

  Hope this helps and have a great day!

• Down on the Image, but not on the mouse scroll bar event?

  Hi all

  I use an event "Mouse Down" on an image to save the coordinates X and Y of the click and increment a counter.  My problem is that I'm looking at an image with a scroll bar that I want to use to set what part of the image is visible.  When I click on the scroll bar, I set off the mouse event down and increments the counter, which I won't do.

  Is there a way to implement a mouse event to the bottom so that it will ignore clicks on the image scroll bars?  If not, can you think of another way to accomplish what I'm doing?

  Thank you!

  Some quick ideas:

  The scroll bars will be a fixed height or width of the right or at the bottom of the indicator. In the mouse to the bottom of the event handler, if the click happens to a set of coordinates that are in a region of scroll bar, you know, do not increment the counter.

  OR

  Maybe you can overlay a transparent image control such that it covers the image but not the scroll bars, and find clicks on this second control.

  Mike...

• Laptop HP G70 connection to the router but not the internet

  I have a laptop HP G70 running windows 7, I got a new router installed. My computer to the router, but not to the internet links. I tried the software updates for my drivers running, doing all used to end router for example change etc channel/parameters/IP wifi. I tried to turn off the wireless, reset the router and re enabling it does not work.

  It will connect to the internet ethernet of nis.

  My laptop connects fine with other networks if it is not wireless.

  All other devices are connected to the router.

  Please help this is extremely frustrating.

  You are the very welcome.

  I compressed the file and downloaded on my Skydrive account, which I shared the link below.

  Download, unzip and run the file called sp54972.

  https://onedrive.live.com/redir?RESID=832F4957D2E51B93! 263 & authkey =! AEOhdjA3QVhETy0 & ithint = % 2czip

• Can move the pointer, but not click on

  Notebook Acer Aspire to my son started with this issue today - with mouse and keyboard, that it can move the pointer, but he can't right or left click inside a program or another window, he can click on the desktop.
  Support said that something must be corrupted, and we should do a wipe.
  I expected a less nuclear solution.

  We have already restarted the computer, checked the Device Manager, checked the settings of the Mouse/touchpad and checked that the driver is up-to-date. Everything looks good, but still, it can not click. Any ideas?

  The system now works fine as long as it is not alt + tab on Skyrim 'too much '.  It seems to be a problem with the layer that Windows puts between her office and the program window.  When the problem occurs normally, you can click on the desktop, but not inside any other window, even a Windows Explorer window.
  No wipe/restoration required.

• I'm unable to access my computer (windows 8) with my microsoft account. The password works for the connection to outlook on the internet, but not the computer.

  Original title: connection problem

  I'm unable to access my computer (windows 8) with my microsoft account. The password works for the connection to outlook on the internet, but not the computer.

  The message I get when trying to connect is simply that I cannot connect you at this time and that I should follow a link to reset the password - what I've done without result. The computer is connected to the internet.

  Hello

  Thanks for posting your query on the Microsoft Community.

  With the publication of the description, I understand that you are unable to access your computer using Microsoft password account on the machine Windows 8. I will certainly help you get this problem.

  I would be grateful if you could help me with more information:

  1. Since when you are facing this problem?

  2. What is the exact error you receive by accessing the computer?

  I would say to you follow the suggestions provided by Cliff_N responded on 7 December 2012 in the below thread Microsoft:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-security/why-cant-i-sign-into-Windows-8-with-my-Microsoft/7662ea57-c321-4bfe-84e9-fc9ebb87a44b?TM=1355519512755#_self

  Important information: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  Note: When updating, the applications you have installed Web sites and DVDS is deleted. The applications provided with your PC and applications that you have installed in the Windows store will be resettled. Windows puts a list of apps removed on your desktop after you refresh your PC.

  For more information, you can consult the Microsoft article.

  What to do if you forget your Windows password

  http://Windows.Microsoft.com/en-us/Windows/what-do-forget-Windows-password#1TC=Windows-8

  Hope this information is useful. Please come back to write to us if you need more help, we will be happy to help you.

• When I plug in an external hard drive usb, it is recognized in Device Manager, but not in Solution Explorer.

  When I plug in an external hard drive usb, it is recognized in Device Manager, but not in Solution Explorer. I use windows 7 on a laptop Pavilion dv7-6b77dx.

  Thank you.  I followed your instructions and it worked.  I am amazed by these forums.  No matter what a person has problems, there is someone out there who has the knowledge and the willingness to share with the less informed.  Thanks again for you information.

  lacroos

• I am developing photos in lightroom.  My photos are below the screen but the screen is lit in blue.  I double click on an image and nothing happens.  I can look in the library, but they don't come to develop.  Anyone know what

  I am developing photos in lightroom.  My photos are below the screen but the screen is lit in blue.  I double click on an image to display and nothing happens.  I can look in library mode, but not in the mode to develop.  Can someone help me?

  Hi pennym,

  Please follow the steps below.

  Open Lightroom

  Go to Lightroom preferences in the Edit menu

  Click the performance tab

  Deselect the graphics processor

  Restart Lightroom and try to use it

  Let us know if that helps.

  Kind regards

  ~ Mohit