F4240 all-in-one install questions

Similar Questions

• HP 4630 all-in-one: install hp4630... print wireless from iPad... Unable to print from the laptop? All ideas

  Installed new hp4630 printer all in one... can print wireless from my iPad, but I can't print from my laptop?
  Recently upgraded to windows 10. Any ideas? I'm not very computer.

  Hello Tommyboy2,

  Welcome to the HP Forums.

  I see that you experience a problem when you try to print from your computer.

  Have you installed the software/driver for Windows 10?  If this isn't the case, please click on the following link for the e-all-in-one HP Officejet 4630 Printer series full feature software and drivers.

  Please let me know if you see messages or error codes on your computer or printer when you try to print.

  Thanks for your time.

  See you soon,.

• C5100 all-in-one install option missing

  I'm on Windows 8, 32 bits.

  If the printer has been buggy and I decided to uninstall and reinstall. As I uninstall I was also downloading the files. After that I reinstalled the c5100 all in one package on the site, I ran the installation. However, he said that I didn't have enough memory to complete the installation. He suggested to delete some files and then eject and close cd player. Well this option was not really there because it's a download online. I don't know what to do, so I restarted the computer. Apparently, it was a mistake.

  After that I did a lot of space on the hard drive, I tried to re - run the installation. Now, however, when the install window appears it says "select install to begin the installation of your new HP device". But this option is not there. In fact, the only option is to exit.

  I deleted all temporary files related to the download of the package of pilot and re-uploaded, but I get the same problem. I also uninstalled all HP on the computer software, but still nothing. I don't really know what I can do. Any help?

  Thank you.

  Hello DrNo07,

  Welcome to the Forums of HP Support!

  I see that you're stuck in a bit of a loop, the C5100 software must be installed, but it doesn't give you an option to do so. I would like to offer a suggestion;

  • Download the software from HP.com: HP Photosmart full feature and driver software.
  • Open the file and allow it to extract to the temp folder and close the installation program.
  • Open the temp folder and then open the most recent 7z folder.
  • Open Util then CCC.
  • Run the uninnstall L3, and restart the computer.
  • Use the Printer Wizard to download and install again.

  Let me know if it gets things install again.

  See you soon,.

• Can't get HP Officejet 7210 all-in-One install

  Have tried to install the HP Officejet 7210 all-in-One ways, using the two sent HP drive for WIN7, download HP and Microsoft Download.  Even did a fresh reboot and all "HP" regedit.  This printer worked fine under WIN XP Pro, but now with a fresh install of WIN7.  It crosses the installation but does not print.  By checking the properties of the printer, it shows model #unavailable, scanner unavailable and on pilot shows nothing.  Can anyone help?

  How is the connected printer - USB or wired LAN?  I suggest that you look on the CD to a directory util\ccc.  This directory should be a series of commands, uninstall_L1.bat by uninstall_L4.bat files.  Unplug the printer, and then run uninstall_L1, then uninstall_L2 and uninstall_L3 files.  Then run the installation program and do not connect the printer until you are prompted to by the installer.

• HP Deskjet F4240 all-in-one: tried to install F4240 printer on my new windows 7 Professional, says it is not supported?

  I was wondering if I should get a new printer or can I still use my old F4240 on my new computer laptop that has Windows 7 Professional?  When installing DVD, he tells me that it is not supported.

  Appreciate any help you can give me.

  The Deskjet F4240 is supported in WIndows 7.  It is possible that the DVD you have was released before Windows 7.  You can download the complete driver recommended from HP here.

  The wizzard running install driver to http://www.hp.com/go/tools would also be an option.

• Hp4480 all-in-One install locks won't let XP Home start

  Just bought a 4480 all-in-in-one printer and have significant problems with the installation.  After installation, printer seems to work very well.  Then restart computer and XP don't start, not even in safe mode.  After several attempts and running the diagnostics, it appeared that I had a hard drive problem. So after picking up a new hard drive and spend countless hours rebuild the computer from scratch - (during which time I discovered that my old hard drive works perfectly - and now I own a new 320 g drive)-I have reinstalled the printer with special attention to install steps, moving slowly and deliberately through the process once more be faced with the same situation of Mid-Autumn Festival on the new hard drive.  I am puzzled, baffeled, frustrated and Yes on the point of being angry!

  One of the install I see talk when install hangs - my Setup seems to work very well any electronic errors, not complete, and work - until I reboot and I have stuck.  At least this time I can boot into safe mode and uninstall everything.  Once to uninstall everything is back to normal and I can start again without problem.

  I tried to install the driver database and all, but nothing helps-

  I'm ready to make one more run at it, if someone has a good idea.  If this isn't the case, I will drain the HP printer and all considerations of future purchase HP products.  More frustrating in the present, it's that I'm a shareholder of HP as well!  This kind of thing is not good for business!

  Any help is greatly appreciated.

  Message edited by hpuser4480 on 12/22/2008 06:46

  If the PC freezes even with the printer disconnected or turned off, then the problem CAN BE with the computer itself.
  
  In addition, in some computers, there is an option called "USB Emulation", which is available in the BIOS, and if it is enabled, this may happen. disable this option is safe and has solved the problem several times. so if please refer to your computer documentation and check this option in your BIOS and try to turn it off.

• C4280 Solution Center Software refuses to see all-in-One installed

  OK, my fine ran C4280 forever, all of a sudden won't scan from Solutions center - get various errors - communication error with the device, no device installed, the software is not installed, cannot communicate, software missing etc. ad nauseam. Have reinstalled, uninstalled using all level 4 with rotation of MSCONFIG just turned off and it still don't load correctly 5 different downloads of HP or the CD. The problem is in the part somewhere, scanning software as I can scan WIA and painting (which uses the WIA) Photoshop and most of the programs with the exception that the program offers you to use the scanner software, I get a message similar to "not installed". Obviously not a problem of USB that I can scan fine in WIA and obviousl it is two-way connection, but solution center not scan. He'll work for the copy function, but hit the photo or document scanning time and error message. Any ideas away from throwing the entire unit. Completely updated XP3 to day running.

  I was contacted at last by the advanced support tech, unfortunately, he wanted me to reformat my hard drive and reinstall windows XP, which was not an option. Instead, I got creative - uninstalled "Solution Center"through the control panel and all HP, including HP Photosmart 2.0 software. Put the cd in and sailed to uninstall (rt click on the disc in the cd drive and open, search for folder util, open. find the ccc folder and open, uninstallers are listed as "uninstall_L1, 2, 3, 4") used level 1, then 2, then 3, then 4 programs uninstall and rebooted. Then, I downloaded the HP Photosmart 3.5 software and installed by itself, as the prior installation would not allow the scanner to connect (TWAIN error absent). Then downloaded the package "Solution Center" and the software for a C6280 and installed, although it would not recognize the C4280, I continued with the installation by checking I would connect later. I unplugged the PRINTER from the power from the USB and restarted. After restarting, connected to the PRINTER and then the USB, windows recognized as new hardware, let the Wizard do its thing until he asked for the CD, put the old CD in the drive and let it copy the files he wanted, then came and asked to install a HP screen, I chose "custom" fist and then next sceen asked for auto or advanced , has chosen peak and let it go from there (most of the programs in the list showed already "installed"). When he finished I had 2 digital imaging monitors on my sys tray, rebooted and then alone. Solution Center now opens, communicates with the scanner and the works - if a little slowly, but it is 100 xxxxxx software not software of xxxx. 90.l transmit the tech boys so that they do not force others to reformat and destroy their systems without reason.

• 7310xi all in one install on Vista

  I bought this printer when my system is XP.  I tried to install on my new computer with Vista operating system and the installation will stop.  HP Officejet 7300/7400 series.  HP Photosmart 2600/2700 series.  Also, is there a possibility to Scan with this system?

  Why not try looking for Vista drivers for this printer using the "Support and drivers" link at the top of this page? im sure the drivers and software is available for your printer.

• HP Touchsmart 610-1030y: Touchsmart 610-1030y all-in-One (installing the TV tuner card)

  I want to install a tv tuner card, is there something else that necessary additional drivers for the installation to be successful.

  * Note * I was told that I may need to upgrade from my diet.

  Help, please!

  Thank you

  Hello

  What is your TV tuner card? For a normal PCIe card, I don't think that you need more power, but you need a good antenna.

  Kind regards.

• HP Deskjet 2540 All in One on macbook pro

  I recently acquired a MacBook Pro running the version of Mac OS X 10.6.8.   I could get my wireless networked 3540 HP all-in-one installed as printer, but it won't install, recognize oe open the scan function. ; even from the HP installation disk.

  What can I do?

  Hi @chazcee,

  I see by your post you have the Deskjet 2540 and are not able to install it on Mac. I want to help you.

  I provided some documents to help solve this problem.

  HP Deskjet 2540 and Deskjet Ink Advantage 2545 Printer Series - "Can't find printer" Error Message appears on the computer for a wireless network Installation.

  Set up your printer for a wireless network for the HP Deskjet 2540 and 2545 all-in-One Printer Series.

  If you appreciate my efforts, please click on the "Thumbs up" button below.
  If you have any questions, please let me know what steps you have taken and the results. Thank you.

• All-in-one HP Officejet J4550: hp officejet j4550 all-in-one

  My moms computer was installed by my father and already the installation of the printer. She then began having some problems when printing lines by slots empty words in words. I tried cleaning the printer option, but that has not worked, also tried the alignment of cartridges but that also had problems, sometimes it could not detect the scanner test sheet and then we would say a mistake and return to the default settings. I was then going to the computer application, but he missed. I guess that when it was installed, it was not a complete installation.

  I then started to re - install from the cd without uninstalling it first. Thought it would be OK and just replace the existing files. Sometimes, this works for programs and sometimes you will need to uninstall first. When I loaded the cd it says that this version of windows was not compatible. Then, I searched the net and found this thread of Hp.

  http://h30434.www3.HP.com/T5/printer-all-in-one-install-Setup/Windows-7-and-OfficeJet-J4550-install/...

  I downloaded the new installation for win 64 files and down them, before he installed it there was an error (empty white error with a red x) and it wouldn't install. Then sent information to HP and said it has found a solution and downloaded to the desktop. Basically, he wanted to fix my installation but unplug the printer. So I did this and it worked fine during installation. Then when he got at the end during the setup I got a fatal error. Something about the configuration has expired or has been too long and we also found several files of HP. So he started to uninstall itself. I thought having bad uninstall programs, then put it back. So I did, worked well until the config part and then he did the time out or another error. The mistake of never came however duplicates. So I cancelled as fast as I could. I can print and scan from the program on the pc. But it lacks the features of the printer itself. As if I hit him scan it tells me to consult the manual. I just want to complete installation work. Any thoughts?

  I did all the steps, downloaded the packgage, uninstalled using l3.bat, did drop cleanboot, reboot, update adobe Flash Player as well as cleaning. Download the hp installation wizard. When running the wizard, it says there is a problem with my driver, then it starts to connect to the internet to download the software, but then said the download was cancelled, click Retry to try again but the retry button does not work. I have mcaffee AV, the only way ive seen turn off is to disable on the analysis of access and the firewall.

  Don't you have an another clean boot and no driver error, but the same error message when the installation wizard attempts to download the full software. Simply use the version of the software from the link has me http://support.hp.com/us-en/drivers/selfservice/HP-Officejet-J4000-All-in-One-Printer-series/3645081/model/3645096#Z7_3054ICK0KGTE30AQO5O3KA30R1

  FINALLY HE GOT WORKING:

  Downloaded the basic print and scan driver package, ran the installation and it did not work. I started to think there must be a driver problem. Had similar problems with itunes where it wouldn't read my ipod even after an uninstall and reinstall. And for that I had to remove the driver and reinstall it, for some reason any it was causing problems.

  Make sure the name is exactly the same as the folder. After its extraction do the same for the complete package. After extraction, a HP screen may pop up, just close for now.

  1. If the printer software is installed, uninstall it.

  2. with the connected printer go to devices control panel\ Manager, right click on your printer and click on uninstall. Check the box in the lower right corner that says something like "Do you want to remove the software driver or files" then click on uninstall.

  If box is displayed, and then click cancel, right-click on your printer and select Properties, click on the driver tab at the top, then the Details button pilot. make a new file .txt on your desktop and enter in all of the files and the locations of eveything that appears. After that click OK, then driver tab, click on uninstall.

  Here are some of the files and locations but check they are all listed and not missing anything.

  c:\Windows\system32\drivers\usbscan.sys

  c:\Windows\system32\hpotscl1.dll

  c:\Windows\system32\hpowiav1.dll

  3. open a new file and copy and paste the address of each file in the search bar. It will look something like this

  c:\Windows\system32\drivers\usbscan.sys

  before hitting enter each need to be edited windows otherwise think you try to open the file rather than access the folder. So for the modified example will look like this

  c:\Windows\System32\Drivers

  the drivers folder is what you want to be in and the usbscan.sys is the file you want to check is removed. Do this for everything in your list. If the files have disappeared that has, if not manually delete them or move them to a new folder on the desktop until installation is complete just in case.

  4. (computer may or may not need to be restarted) and then unplug the printer, open the software package and the base driver and double-click setup.exe. Do the installation and when it asks you to connect the printer.

  5. after its installed according to your needs, you can either test its features to see if it has what you need or you go to install more packages / programs from the full version.  Double-click setup.exe for the full package, then it will ask you that you if you want to uninstall or install more software, select the installation of the software. He can just show 1 or maybe a little. If its does not display those you want to click on the buttons more or less recommended until you find what you are looking for. You can try to install more then one at a time, but for me it did not work, I had to do one at a time.

  As far as the folders on the desktop used for extraction, it is a good idea to keep those with your backup files unless you use a restore image, but it good to keep because the backup even images may have problems. I would recommend save their be on a cd/dvd, USB drive, external hard drive, the cloud storage lol somewhere just in case you need it again as well as installation instructions. If you have moved all the files in the driver instead of delete and your printer now works, you can remove them.

  NOTE: If keeping the package for later use, Exchange compressed files for those who have been extracted because they take less space. Unless you want to just the ones extracted. (Compressed are those you downloaded from HP in the folder downloads, extracts are those in the office used for installation folder.)

  And thank you Gemini02 for helping me with this.

• Alignment page is not detected on a c4200 series all-in-one.

  I have a c4200 all in one, installed on a Vista Home pc series.  After you have installed a new black ink cartridge and the alignment page printing, printing is not detected when I place it on the printer.  The color cartridge is empty so that has nothing to do with why it does not detect the page?

  Hello

  The empty color cartridge have much to do with the reason why it will not detect the alignment sheet.

  The printer will not be able to complete the alignment process as long as the alignment sheet will not contain black, Magenta and Cyan.

  Kind regards

  Shlomi

• HP Officejet Pro L-7780 All in one-Windows 8 64-bit - cannot scan to PC public folder

  See this post: http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup-e-g-Windows-8/OfficeJet-Pro-8500-A910-... has the hope to solve my problem in the same way. No go. I installed the new firmware (R2011NxNxeN0), which did not help. My public folders are shared, open wide! When you use the scan to folder option, it seems to sweep very well, then I get the error: "network connection error. Check the network and try again. "Looking at the public record, there is a sitting fresh pdf file with a size of 0 KB. It's frustrating because it's a feature, I used every day. Juct works fine with Win7... Help!

  Not that I know of. You can try emailing HP on it, but I doubt that it gets very far. Engineers and officials of this Department, are those that determine if the new firmware written is worth 'investing', and generally they do not write new firmware for printers that are more than 3 years. I'm sorry.

• 2540 cartridge error HP all-in-one office under windows 8 will not be printed

  My HP deskjet 2540 all-in-one printer will be printed not in windows 8. pls help.

  Hello

  Please see my response to your other thread:
  http://h30434.www3.HP.com/T5/printer-all-in-one-install-Setup/HP-DeskJet-2540-in-Windows-8-not-printing/m-p/3611251/highlight/true#M129063

  Thank you

• What happened to the desktop GUI HP 7520 Photosmart e-all in one?

  The death of the printhead on my C310 printer, HP support convinced me by buying a given 7520 refurbished.  I am familiar with the installation and everything went well and I have the printer wireless connected and working.  But instead of the graphical user interface familiar to access printer features (printing, scanning, etc.), installation has placed 2 Notepad format on my desktop which are titled Notepad files: HPSPProgress and HPSolutionsPortal

  I have a 64-bit Dell running Windows 7, if it is relevant to the solution of putting a GUI for the printer to my desktop.

  For the record, clicking on Start > all programs > HP gives only 3 choices: updated HP, HP Photo Creations and HP Photosmart 7520 series . It contains elements of submenu such as help, study of product improvement, HP, HP Scan, printer Steup & software, product, Support Web site buy supplies, uninstall, update the IP and Wireless Printing Held online.

  There is a submenu entry also called HP Photosmart 7520 series and clicking on it gives the aforemention scripts entitled 'HPSPProgress'...... .and then a second window opens with the script HPSolutionsPortal . (Try copy & paste them here by Poles should not exceed 50 KB).

  Does anyone have a solution to the dilemma?  Somewhere along the line, I downloaded a potential difficulty, hppiw.exe, but it doesn't seem to work.

  TNX I know how to create a shortcut, but there was an error in the code.  @HPSupport on Twitter pointed out downloadable patch available even if it is a fix of Windows 8 and my OS is Windows 7 64 bit.

  http://h30434.www3.HP.com/T5/printer-all-in-one-install-setup-e-g-Windows-8/software-error-related-to-Windows-8-not-being-able-to-open/m-p/2510739/highlight/true#M87741

  Do not use Firefox as a browser to download and run as he doesn't get up on me. Worked well with Chrome.