7310xi all in one install on Vista

Similar Questions

• Canon imageCLASS MF5550 all-in - One Printer Driver Vista or WIndows 7?

  I have a picture of Canon MF5550 CLASS all-in-one laser printer connected to a computer running XP on a local wireless network. I have two laptops over the Wireless LAN under Vista and Windows 7. There is no driver available for this printer beyond XP. Is there a way I can print laptop laptop Vista or Windows 7 computer through the attached XPcomputer printer?

  Santu

  -------

  Hello

  Because the drivers are not compatible with Windows 7, so I suggest you to install the drivers under Windows 7 by choosing the level of compatibility under Windows X.

  Drivers: http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/imageclass_series/imageclass_mf5550?selectedName=DriversAndSoftware

  Reference:

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  http://Windows.Microsoft.com/en-us/Windows7/what-is-program-compatibility

  Hope this information is useful.

• HP Officejet 7310xi all in one: the HP Officejet 7310xi all-in-One Printer-t - y at - it a hard drive?

  The all-in-one printer HP Officejet 7310xi contains a hard drive?   So if, for the purposes of recycling how to remove or disable otherwise?  Thank you.

  There is no hard drive in the Officejet 7310xi.  Verify that no memory card is inserted in the memory locations in the lower right front side of the machine.

• HP 4630 all-in-one: install hp4630... print wireless from iPad... Unable to print from the laptop? All ideas

  Installed new hp4630 printer all in one... can print wireless from my iPad, but I can't print from my laptop?
  Recently upgraded to windows 10. Any ideas? I'm not very computer.

  Hello Tommyboy2,

  Welcome to the HP Forums.

  I see that you experience a problem when you try to print from your computer.

  Have you installed the software/driver for Windows 10?  If this isn't the case, please click on the following link for the e-all-in-one HP Officejet 4630 Printer series full feature software and drivers.

  Please let me know if you see messages or error codes on your computer or printer when you try to print.

  Thanks for your time.

  See you soon,.

• C5100 all-in-one install option missing

  I'm on Windows 8, 32 bits.

  If the printer has been buggy and I decided to uninstall and reinstall. As I uninstall I was also downloading the files. After that I reinstalled the c5100 all in one package on the site, I ran the installation. However, he said that I didn't have enough memory to complete the installation. He suggested to delete some files and then eject and close cd player. Well this option was not really there because it's a download online. I don't know what to do, so I restarted the computer. Apparently, it was a mistake.

  After that I did a lot of space on the hard drive, I tried to re - run the installation. Now, however, when the install window appears it says "select install to begin the installation of your new HP device". But this option is not there. In fact, the only option is to exit.

  I deleted all temporary files related to the download of the package of pilot and re-uploaded, but I get the same problem. I also uninstalled all HP on the computer software, but still nothing. I don't really know what I can do. Any help?

  Thank you.

  Hello DrNo07,

  Welcome to the Forums of HP Support!

  I see that you're stuck in a bit of a loop, the C5100 software must be installed, but it doesn't give you an option to do so. I would like to offer a suggestion;

  • Download the software from HP.com: HP Photosmart full feature and driver software.
  • Open the file and allow it to extract to the temp folder and close the installation program.
  • Open the temp folder and then open the most recent 7z folder.
  • Open Util then CCC.
  • Run the uninnstall L3, and restart the computer.
  • Use the Printer Wizard to download and install again.

  Let me know if it gets things install again.

  See you soon,.

• Can't get HP Officejet 7210 all-in-One install

  Have tried to install the HP Officejet 7210 all-in-One ways, using the two sent HP drive for WIN7, download HP and Microsoft Download.  Even did a fresh reboot and all "HP" regedit.  This printer worked fine under WIN XP Pro, but now with a fresh install of WIN7.  It crosses the installation but does not print.  By checking the properties of the printer, it shows model #unavailable, scanner unavailable and on pilot shows nothing.  Can anyone help?

  How is the connected printer - USB or wired LAN?  I suggest that you look on the CD to a directory util\ccc.  This directory should be a series of commands, uninstall_L1.bat by uninstall_L4.bat files.  Unplug the printer, and then run uninstall_L1, then uninstall_L2 and uninstall_L3 files.  Then run the installation program and do not connect the printer until you are prompted to by the installer.

• HP Officejet 7310xi all in one: printer keeps repeating transport jam

  My printer do not print and indicates a carriage jam and told me to open the door and a cart clear jam but there is nothing there, and there is no paper jam. I tried to unplug the machine, its restart, restrting my MAC and the message still flashes. Does anyone have any suggestions. I know this is an old printer, but I love it and want to keep it going. Thanks in advance for any ideas.

  Hello

  Please visit the link below to fix the problem

  http://support.HP.com/us-en/product/HP-OfficeJet-7300-all-in-one-printer-series/391181/model/391190/document/c00304007/

• While trying to install the Kodak printer all-in-one on my Vista computer, I get the error "2147287035" system

  Original title: 2147287035 system error

  Hello

  Tried to install Kodak all in the printer software, then I got the error database error 2203 2147287035 tracking system - windows/installer\a720de.msi.

  Can you please help

  Thank you

  Hello

  If I understand correctly you have a problem with installing the Kodak all in a printer on your Windows Vista computer drivers. I would like to know more information on the issue, so that we can help you better.

  1. What is the error message or an exact error code?

  2. What is the Kodak printer model number?

  Let us try the following methods and check if it works for you.

  Method 1:

  Try installing the driver in a clean boot state. Place the computer in a clean boot state will help you to install programs without any interference from third-party program/application.

  Step 1: How to troubleshoot a problem by performing a boot in Windows Vista or Windows 7:

  http://support.Microsoft.com/kb/929135

  Note: once you have completed troubleshooting, try the procedure described in step 3 to reset the computer to start as usual.

  Step 2: Find and install printer drivers:

  http://Windows.Microsoft.com/en-us/Windows-Vista/find-and-install-printer-drivers

  Method 2:

  Try to install the printer driver in the Compatibility Center.

  Make older programs run in this version of Windows:

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows

  Please respond with the State of the question, so that we could help you better.

• F4240 all-in-one install questions

  Hello, after reading similar messages and suggestions and not solved yet. Info as follows:

  Vista home premium 32 bit on the computer gateway 'E-Machine' (hold the sarcasm please, Wal-Mart is my life lately)

  system is superior to min.specs for installation

  printer is new - it is the first attempt to run

  software not load disc or Web site, receive "fatal error" alert when attempts to download e:\setup\ hpzr101.exe - inf - m preload product files stub drivers-w 328262-1enu situation 22094348.Uninstalling error code and reload doesn't help not, followed by purging of the steps of a response for an xp system ealier, nothing helps.

  In addition, I had previously tried to install a printer photosmart 1100 older series which proved not to be compatable (apparantly). I even removed, but is it possible that I have junk files, I'm not finding that create conflicts? Functions of hardware ok, other than the lack of prompt commands from the computer. Is it possible that I have a fundamental incompatibility problem? So far, all the avail.info says it should work. Any help for this greatly appreciated rookie difficulty. Thank you

  Thanks for the comments. Unfortunately, download from the link you provided doesn't seem to do either. One, that I forgot to include in my original post was that when the cd tries to clean files after fatal error, I get an alert hpzrcv01 indicating that unregistered library. Don't know that if this is relevant, I thought it was a failure that occur when the data is sent to hp, but it does not appear when I had the first attempts of transfer failed. Thanks again for help.

• Hp4480 all-in-One install locks won't let XP Home start

  Just bought a 4480 all-in-in-one printer and have significant problems with the installation.  After installation, printer seems to work very well.  Then restart computer and XP don't start, not even in safe mode.  After several attempts and running the diagnostics, it appeared that I had a hard drive problem. So after picking up a new hard drive and spend countless hours rebuild the computer from scratch - (during which time I discovered that my old hard drive works perfectly - and now I own a new 320 g drive)-I have reinstalled the printer with special attention to install steps, moving slowly and deliberately through the process once more be faced with the same situation of Mid-Autumn Festival on the new hard drive.  I am puzzled, baffeled, frustrated and Yes on the point of being angry!

  One of the install I see talk when install hangs - my Setup seems to work very well any electronic errors, not complete, and work - until I reboot and I have stuck.  At least this time I can boot into safe mode and uninstall everything.  Once to uninstall everything is back to normal and I can start again without problem.

  I tried to install the driver database and all, but nothing helps-

  I'm ready to make one more run at it, if someone has a good idea.  If this isn't the case, I will drain the HP printer and all considerations of future purchase HP products.  More frustrating in the present, it's that I'm a shareholder of HP as well!  This kind of thing is not good for business!

  Any help is greatly appreciated.

  Message edited by hpuser4480 on 12/22/2008 06:46

  If the PC freezes even with the printer disconnected or turned off, then the problem CAN BE with the computer itself.
  
  In addition, in some computers, there is an option called "USB Emulation", which is available in the BIOS, and if it is enabled, this may happen. disable this option is safe and has solved the problem several times. so if please refer to your computer documentation and check this option in your BIOS and try to turn it off.

• Is there a link that explains the installation / relocation to scan in officejet 7310xi all in one?

  We said this 6 yr old one is obsolete, but works very well except for scan - screen says needs to install or run HP softeware. Thank you

  Hello

  Please select the operating system , and then click Next to download the drivers and the software from this link

  Concerning

• How to find capabilities of scanning with C5180 all in one with Windows Vista? CC = en

  I can print with C5180.  I can't scan.  When I go to programs on my Windows Vista computer, I can see is no longer my unit indicated.  I tried to reinstall the disc that came with the device.  Install doesn't work.

  Hello RDB49 and kethyinmo

  Try the following procedure. It will remove the HP software and software that can cause problems. Please let me know if any of you have problems.

  Of the Original installation CD:

  1. Insert the CD in the drive and then cancel Setup

  2. open my computer and click right then on the CD from the drive and select open

  3 open the Util folder

  4 open the CCC folder

  5. If you have an HP computer, run the L3uninstall.exe. If you have a computer not HP, run the L4uninstall.exe

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://get.Adobe.com/flashplayer/

  9 download drivers and full software features

  10. run the download to reinstall the printer

  If the software has been downloaded and extracted to your system:

  1. type % temp % in the field of race

  2. Locate and open the folder starting with 7z (example: 7zS2356)

  3 open the Util folder

  4 open the CCC folder

  5. If you have an HP computer, run the L3uninstall.exe. If you have a computer not HP, run the L4uninstall.exe

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://get.Adobe.com/flashplayer/

  9 download drivers and full software features

  10. run the download to reinstall the printer

• all in one for windows vista scanner won' work

  I have all HP J4680 printer.  I had someone on my scanner that messed up somehow and I couldn't get my scanner copier fax at work.  I downloaded the HP update still does not work. has made the Diagonistic tool, still does not work, had my computer neighbor guy look at it, we both abandoned.  How to bring back my Scanner.  My printer works fine, but I failed fax message scanner copier.  My computer is telling me that my scanner is set up and working, but it doesn't.  any help would be appreciated.  I am running Windows vista.

  Hello

  Please perform the below mentioned steps that should solve the problem.
  1. While the printer turned on, unplug the power cord from the back of the printer.

  2. wait for 60 seconds, then

  3. plug the power cord of the printer directly to a wall outlet (by col the power surge / power strip), then to the printer.

  4. now try to make a copy. It should work.

  If issue you still exists, please call the HP Technical Support for assistance.

  If you are in US , toll free # is 1-800-474-6836.

  If you are not in US , then log on to www.hp.com , bottom left it is an icon of the world map, click it, then select the region that you belong to, which would then provide the support options for you for this region.

  Kind regards
  Jabzi

  Give Kudos to say 'Thank you' by clicking on the White Star under my name.

  Click on 'Accept as Solution' if it has solved your problem, while others may find it.
  I work for HP

• C4280 Solution Center Software refuses to see all-in-One installed

  OK, my fine ran C4280 forever, all of a sudden won't scan from Solutions center - get various errors - communication error with the device, no device installed, the software is not installed, cannot communicate, software missing etc. ad nauseam. Have reinstalled, uninstalled using all level 4 with rotation of MSCONFIG just turned off and it still don't load correctly 5 different downloads of HP or the CD. The problem is in the part somewhere, scanning software as I can scan WIA and painting (which uses the WIA) Photoshop and most of the programs with the exception that the program offers you to use the scanner software, I get a message similar to "not installed". Obviously not a problem of USB that I can scan fine in WIA and obviousl it is two-way connection, but solution center not scan. He'll work for the copy function, but hit the photo or document scanning time and error message. Any ideas away from throwing the entire unit. Completely updated XP3 to day running.

  I was contacted at last by the advanced support tech, unfortunately, he wanted me to reformat my hard drive and reinstall windows XP, which was not an option. Instead, I got creative - uninstalled "Solution Center"through the control panel and all HP, including HP Photosmart 2.0 software. Put the cd in and sailed to uninstall (rt click on the disc in the cd drive and open, search for folder util, open. find the ccc folder and open, uninstallers are listed as "uninstall_L1, 2, 3, 4") used level 1, then 2, then 3, then 4 programs uninstall and rebooted. Then, I downloaded the HP Photosmart 3.5 software and installed by itself, as the prior installation would not allow the scanner to connect (TWAIN error absent). Then downloaded the package "Solution Center" and the software for a C6280 and installed, although it would not recognize the C4280, I continued with the installation by checking I would connect later. I unplugged the PRINTER from the power from the USB and restarted. After restarting, connected to the PRINTER and then the USB, windows recognized as new hardware, let the Wizard do its thing until he asked for the CD, put the old CD in the drive and let it copy the files he wanted, then came and asked to install a HP screen, I chose "custom" fist and then next sceen asked for auto or advanced , has chosen peak and let it go from there (most of the programs in the list showed already "installed"). When he finished I had 2 digital imaging monitors on my sys tray, rebooted and then alone. Solution Center now opens, communicates with the scanner and the works - if a little slowly, but it is 100 xxxxxx software not software of xxxx. 90.l transmit the tech boys so that they do not force others to reformat and destroy their systems without reason.

• HP Touchsmart 610-1030y: Touchsmart 610-1030y all-in-One (installing the TV tuner card)

  I want to install a tv tuner card, is there something else that necessary additional drivers for the installation to be successful.

  * Note * I was told that I may need to upgrade from my diet.

  Help, please!

  Thank you

  Hello

  What is your TV tuner card? For a normal PCIe card, I don't think that you need more power, but you need a good antenna.

  Kind regards.