F8 for installation of recovery does not work!

Similar Questions

• CD-ROM for Portege 3500 recovery does not work!

  I have a Portege 3500 tablet pc and the recovery cd does not work.
  I followed the instructions but nothing happened to my windows again!
  Can you tell me please how can I get my phone?
  Thank you

  Hello

  AFAIK the Portege 3500 dose does not support internal CD/DVD players.
  Have you used an external hard drive that is compatible and supported for boot from the CD?

• Windows 7 upgrade failed - disk HARD recovery does not work

  I just received my Windows 7 upgrade disc, followed the procedure and he managed to upgrade Vista 64 bit for Windows 7 32 bit! Some drivers also seem to, were charged more than once.

  I tried to do a system restore from the recovery of HARD drive partition - and it won't!

  Can someone, please?

  Hello

  Drive HARD recovery does not work because Win 7 ran the Boot Manager and maybe the HDD partition has been affected.

  I guess you want to roll back to Vista preinstalled Toshiba.
  I think in your case, only the recovery disc will help you.

  Welcome them

• System repair & Recovery does not work / Vista Windows Mail won't open attachments sent with PowerPoint Slide Show

  System repair & recovery does not work.  When I use it, it never restarts the computer.  I have left running and went to bed and is still running the next morning.  The SR & R is grayed out and will not open.   When I restart the computer after that it ran all night, a message appears to tell me that I cancelled the operation.  Help!

  I have another problem with Vista Windows Mail; I can't open attachments are sent using Microsoft PowerPoint Slide Show.  The message is: * this file does not have a program associated with it for performing this action.  Create an association in the set Associations Panel.  I don't know anything about computers or the control panel.  How can I fix these problems?  Help!

  Problem with recovery to factory settings or system/process of repair software, contact the manufacturer of your computer.
  It is their software/recovery process, not Microsoft.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  You need PowerPoint or a viewer PowerPoint installed on your computer to read PowerPoint attachments.
  Learn about file Associations in the lower part of this response.

  need .doc or .docx Word or a Word Viewer for playback file extensions, etc, etc.
  .xls Excel need.
  need for .pps PowerPoint

  Here are the download links for free Microsoft Word, Excel and PowerPoint viewers:

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=3657ce88-7cfa-457a-9aec-f4f827f20cac&displaylang=en

  Word Viewer

  View, print and copy Word documents, even if you don't have Word installed. This download is a replacement for Word Viewer 2003 and all previous Word Viewer versions.

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=1CD6ACF9-CE06-4E1C-8DCF-F33F669DBC3A&displaylang=en

  Excel Viewer

  Open, view, and print Excel workbooks, even if you don't have Excel installed. This download is a replacement for Excel Viewer 97 and all previous Excel Viewer versions.

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=048dc840-14e1-467D-8dca-19d2a8fd7485&displaylang=en

  PowerPoint 2007 Viewer

  Microsoft Office PowerPoint 2007 Viewer allows you to view the presentations of all the features created in PowerPoint 97 and later versions.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  And here is a link to a set of free office of Applications:

  http://www.OpenOffice.org/

  And to set file Associations:

  http://articles.TechRepublic.com.com/5100-10878_11-6172036.html

  How do I... Change file extension associations in Windows Vista?

  See you soon.

  Mick Murphy - Microsoft partner

• WiFi link for printer EPSON-750 does not work

  WiFi link for printer EPSON-750 does not work. In spite of reset the WiFi on the printer and reset the EPSON 750 as default printer on the IMac, the connection between the iMac and the printer does not work

  Have you also tried to restart the router?

• Software for embroidery machine Pfaff does not work

  Have a new computer with windows 7 installed.  Old program for the sewing machine does not work. Suggested that I go to creative 3D as a correction and some people say that it works with 7.  Can see some of its parts at the opening, but the main game continues to tell me that the HASP is missing (-3).  I googled until I'm crazy nearlly and have installed all the latest drivers available on the computer.  Can someone please guide me through the maze because I feel that I am close to her but not how to get there again.

  Thanks, Lesley

  Unfortunately, we have already tried the links above which I thank you for your suggestions.  Now, we will contact pfaff which I did not really expect an answer, I asked a question before.

  Again thank you and if someone else could suggest I would appreciate

  Lesley

• Why can I no longer right click to get the NewFolder option? I realize now, there is a button for this, but it does not work.

  Why can I no longer right click to get the NewFolder option? I realize now, there is a button for this, but it does not work.

  Hello

  I understand that you are facing problems with the creation of a "New folder" option in the context menu.

  Have you made changes on the computer before this problem?

  I suggest to follow the methods provided below and we update on the State of the question.

  Method 1: I suggest you to follow the steps suggested by "Linda Yan" and check if it helps.
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/9ee6ecdf-5958-4AF4-B640-c659ada57bc4/

  Registry WARNING: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, see this link: http://windows.microsoft.com/en-US/windows7/Back-up-the-registry

  Method 2: If the problem persists, I suggest you follow the steps proposed by "Linda Yan" and check if it helps.
  http://social.technet.Microsoft.com/forums/en-us/w7itprogeneral/thread/97de8a2a-12f2-4381-A409-a78f4ae551cf/
  Hope this information is useful.

• 4clipika for satluj police (Punjabi) does not work with windows 8

  R/Sir

  4clipika software for satluj police (Punjabi) does not work with windows 8, but it works with 7 and windows xp. Please solve this problem.

  BSwakaf

  I suggest you cont developer patches or updates.  It is for the developer to make it work with win 8-not the other way around.

• My computer crashed and I tried to re-download CS6. I have a serial number for CS6. but it does not work. I noticed that there are several versions of CS 6. Which version goes with serial number [removed]? I downloaded the stand of design «»

  I have a serial number for CS6. but it does not work. I noticed that there are several versions of CS 6. I downloaded 'standard design', but it did not work. Which version goes with serial number [removed]?

  Thank you

  Bill Heinsohn

  Check your Adobe account online.  If you have registered the software version should be shown there.

  Never share your serial number publicly... anyone can use it.

• Drive HARD Win 7 recovery does not work on Satellite L750

  Hello

  I have the Toshiba Satellite L750 with preinstaled win 7.

  I instaled the upgrade to win 8 (from dvd).

  After that I improve the MS site to Win 8.1 System.

  The system does not work properly (DVD is not recognized) so I have to install previuos system.

  First of all, I'm improving my BIOS for the new one - 3.60.

  After that I try to win 7 reinstal my HDD recovery (which is located on the d partition). But it does not work: it has been impossible to start recovering in the menu of the bios (F8 key does not work, it was only possible to press F2 or F12).

  So I have to install my dvd 8.0 Win and now I have it and it works. But this is only a clear system without any addons like nero, ms office etc.

  My question is how do reinstal win 7 of my hard drive recovery that I always on the d partition?
  in the bios the F8 key does not work.

  After clean OS installation installation of HARD drive recovery not working anymore. If you want to have the original image of recovery preinstalled on your machine, you must use recovery DVDs.
  I assume that you did not create this disc, right?

  In the user s manuals document clearly described how it works with the image recovery and the creation of recovery disks.

• Equium - dead after hibernation, the system recovery does not work

  Hello
  I'm trying to fix the laptop of one of my friends, but so far without success. It's a Toshiba Satellite with Vista.

  She had problems with a black screen after startup in Windows Vista. I found a work around for this problem, but it was a little complicated for her... She doesn't know much about computers. ;)
  So I but it would be a good idea to tell him to always use hibernation. However, when I put the portable standby extended, all seemed fine, shutdown, power off.
  I tried and then turn it back on. Light turns green, cd drive makes noises. Nothing more. Screen remains completely black. No sounds. Keyboard input does not work. No access to the Manager startup or anything else. He left light until I pass him by pressing the button for a few seconds.
  I removed the battery and put back in place, without result.
  Connection to an external monitor shows no results.
  When I put the original CD recovery Toshiba, no results.

  So, basically a cell phone dead. Ah yes, I'm in the Brazil in a small village, away from the stores of tech support or computer. Maybe a problem material, but all was working fine until I used the hibernation.

  Any help or ideas would be very appreciated! ;)
  Daniel

  Hello

  My laptop could not wake up after hibernation too but I managed to wake up again.
  This;
  Disconnect the power adapter and remove the battery.
  Now, you will have to wait a while 1 hour should be sufficient, but you can leave the laptop disconnected for a longer time (all night long)

  After that, you must connect the battery and AC adapter and should try to light the device if it will not help you then you are in trouble
  This would mean that a serious hardware problem causing this problem and I doubt you could remedy without any help from the ASP.

• Built-in webcam for Satellite A200 (PSAF6A) does not work properly

  Hello world

  The webcam works fine once the system starts. But sometimes after the laptop is idle for a while or return to standby mode, the webcam does not work and a "Graphics rendering failed" error message appears when I try to turn on the webcam of the built-in Camera Assistant Software.
  And I don't think that happens only happens on this machine: I got a replacement of the same model due to an error which is not related to the webcam, and again the same problem happened on this machine.

  I tried different drivers on the site of Toshiba (AUS) and the driver of webcam usb by default by Microsoft, but the same result... I also read through the forum of Toshiba. Most related threads did not mention the "Graphics rendering failed" error message. I think that this problem is caused by a defective software by Microsoft or Toshiba; and the reason being that the webcam worked after the system starts and with the premise of no change in material or displacement of the laptop, it stops working after a short inactivity or return to sleep.

  PS: I also reinstalled windows many times continue the recovery DVDs...

  Any help would be appreciated, thanks.
  Tony

  In my view, this problem could be related to the graphics card driver.
  I saw this error message (failure of the graphics rendering) while playing a few games.

  So in my opinion, this isn't just a question of webcam.

  Try to update the graphics driver. I put t know exactly what graphics card you have, but try this sites:
  www.OmegaDrivers.net
  www.laptopvideo2go.com

  Best regards

• System recovery does not work?

  I have a HP Pavilion dv2910us, and I need to perform a recovery system on my laptop. I tried to press F11 when the computer starts, and it does nothing except it emits a loud beep and continues on its way, commissioning. So when it does not work, I came across the site of HP to look for another way may be to perform a system recovery that I never knew. I found that I can open the Recovery Manager in my Start menu and run the operation there. I tried about 15 times, following the specific steps that were given to me and even another way, that I found on the forum. All that happens is my computer restarts and I get into my account and it's the same as it was before. I really need perform this system recovery. I already moved the files that I need to save to an external hard drive, and I really need to solve this problem. What I am doing wrong, or how do I restore my laptop to factory in another way?

  Additional information: my product number is FE989UA #ABA and the series is 2CE8200Y5Q.

  Message edited by snowshoe on 24/07/2009 22:36

  sha3ko wrote:
  I have the same problem, and from what I know, if you have upgraded or downgraded your computer (in other words, if you reinstalled the operating system other than the original) it will cause corruptions on the recovery partition in drive D. I tried to find a way to retrieve the recovery partition, but it seems that there is no way unless you are a computer genius. My final solution just order a set of hp recovery disks, but I'll try that before I pay for it. Good luck with yours.

  Try this >

  1.right - click on the "Computer" icon and select manage.
  2. This will launch the Microsoft Management Console.
  3. on the left side of the MMC console, click "Disk management" and it will show you all the partitions.
  4. right - click on the "HP Recovery" partition and select "Mark as Partition Active."
  5. when the warning message appears, select 'Yes' - restart the notebook and it will automatically start in the Recovery Manager without having to press F11.

• Satellite A100-499 - function for the WiFi button does not work

  Hello, I have a Toshiba Satellite A100 - 499 PSAA9E.

  I formatted my laptop and installed XP with SP3. I downloaded and installed the drivers (in the right order) for this OS of the toshiba - Europe.com and everything is going well except Fn + F8. It is assumed that this combination has toggle Wifi & Bluetooth. When I switch side 'off' position and I press the keys, appears a message saying that I should switch to position 'on' but when I switch lateral position 'on' and I press Fn + F8 it does nothing.

  If I want to disable the wi - fi I have to do it with other methods: the function key does not work correctly.

  Any clue?
  Thanks for the advice (and sorry for my English).

  When the WLAN switch is on orange LED is also on?
  You can scan area available networks?
  Have you tried to use the WLAN without using FN + F8?

• Internal TV tuner for the Qosmio G20 does not work

  I have a qosmio G20 and the built in TV does not work, I reinstalled the driver and the program windvr 5 but no response.
  Whenever I start the program, I can't use the installer.
  Please can someone help me?

  Hello

  Qosmio G20 was delivered with Windows MCE.
  You can also use the Media Center Microsoft watch TV on the laptop!

  Please check if the built-in TV tuner works with MCE. If so, there is nothing wrong with the tuner or the drivers!

  Best regards