Similar Questions

• Using Facetime and iMessage with multiple phone numbers

  I often travel internationally. When abroad, I get a local SIM card and so a local phone number. The problem is, anyone trying to send messages to my becomes phone number inside a bounced message until I go home. I am looking for a solution to this problem. What I want to do logically is to pass all my iMessage and Facetime messages to my phone number internal to any international phone number that I have the chance to have for the week or two, I'm out of the country, without actually transferring phone calls for the international number.

  How can I accomplish this?

  If during the passage of an international SIM inside, if I use a different AppleID to save the number, can I add the domestic AppleID to iMessage and Facetime and have forward SMS messages to internal phone to my phone number - actually give my 2 phone numbers for text and using Facetime?

  What happens if I have a second iPhone (say one IS minimal) think I swap my SIM home - then I have two iPhones, one with an international SIM card and the other with an internal SIM card - then - I associate the two phones with the same AppleID (as if I had the same AppleID on an iPhone and iPAD) and make it work? In other words, a text Message sent to my iPhone internal SIM also towards my international SIM iPhone? This I must have my internal iPhone with me, or I can leave home and have it still work?

  Any suggestions for other ways to solve this problem?

  Thank you!

  HU

  You should always be available for the Apple ID that is associated with a phone number at one point.

  SMS is out of scope for this, because it is a function of carrier managed by your carrier at that time and linked to your SIM card.

  You put a new SIM card in your phone, FaceTime and Messages should register again your Apple ID for/with this new phone number shortly after. I do not think it deal only with the functions of automatic reference to FaceTime or Messages, because they are themselves a transfer function.

  To the Apple server... "go get my friend with the Apple ID of [email protected]." Server Apple think and said: "OK, it uses the 888-555-1212 phone number right now, so I'll send your application there.

  Ring, ring... you download a FaceTime application.

• can not activate facetime and imessage iphone 5

  I got my iphone brand new 5 Friday everything works fine! Really happy with it, as this is my first iphone. I tried to activate facetime and imessage, but it keeps failing. I reset the phone and other troubleshooting activities all to nothing does not. My service provider says it's a matter of Apple Apple says that it is the problem of my career. 7 hours trying to resolve this issue still not right. My apple id, it's all good so help someone?

  Who is the carrier? Also try the procedure described in this article

  If you get an error when you try to activate FaceTime - Apple Support or iMessage

• I connect to my icloud account to activate facetime and it says I need to verify my email address

  I connect to my icloud account to activate facetime and he says I need to verify my email address, how do I?

  You can also use your email address with iMessage and FaceTime. If you have any questions, check your e-mail address, learn what to do:

  • Your e-mail address is already used.
  • You did not receive the verification email.

  FaceTime is not available in all countries or regions.

  If you get an error when you try to activate FaceTime - Apple Support or iMessage

• EMail address added to < < my device name > > < < my device name > > now using < < my mailadress (identical to the Apple ID) > > for FaceTime and IMessage.

  My iPod touch get now and then next alert message due to change on my iPhone.

  EMail address added to < < my device name > > < < my device name > > now using < < my mailadress (identical to the Apple ID) > > for FaceTime and iMessage.

  Why I get this message? iPhone is disabled due to my work offshore for two weeks, but the use of the iPod touch is allowed.

  What is my apple ID used on other devices with the same name as my iPhone?

  I would be happy if anyone has an explanation of why I feel this strange behavior.

  When you connect to FaceTime or Messages on another device, another peripheral other device using this same ID will get the message that has been signed to. Some iOS (and OSX) update log for other devices will get the message when that happens.

  You said "by reason of change on my iPhone"

  What has changed on the iPhone?

• Hello from Firefox can be used for three or more way call or is it only from person to person?

  Hello from Firefox can be used for three or more way call or is it only from person to person?

  Hi awilcox Hello firefox time can only be used for a direct conversation between two people.

• FaceTime is not receiving calls

  I can make calls on my end 2011 (El Capitan) iMac using FaceTime, but for some reason that I can't receive them. Can I get them on my phone, but my Mac does not "sound". Nothing will come through.

  Any suggestions?

  I'm going to assume that you have checked each of these facts:

  FaceTime can make outgoing calls.

  b. you don't get calls to an email address or iPhone number corresponding to the Apple code that you are currently using. Calls to any other ID Apple that you may have used will not be received.

  c. the appellants are not on your list of blocking.

  (d) at least one of the callers can call other users of FaceTime - but not you.

  If you have verified these facts, please take each of the following steps you have already taken it. Stop when the problem is resolved. Back up all data before making any changes.

  1. open the Notifications pane in system preferences. Select FaceTime from the list on the left. The banners or alerts alert style must be chosen - not None.

  2. in the same window, select do not disturb. If none of the three top boxes on the right is checked, then all FaceTime calls will be blocked in the corresponding conditions. If you want to use 'do not disturb', but you also want to receive calls when it is active, check or for both the two boxes below, according to your preference.

  3. If the built-in firewall application is enabled, please disable it. In case you are worried about the implications of this step, the firewall generally useless when you're on a private behind a router network.

  4. If you have installed any third-party 'firewall', 'security', or 'anti-virus' software, remove it according to the instructions of the developer. All these software are worse than useless.

  5. If you are connected to a VPN, you disconnect. You may need to remove some third party software VPN completely to solve the problem.

• I have a persistent popup on my iphone screen saying I have ad/spyware and need to call support technique apple to 1-800-893-4975. Was suspicious so nicknamed by land line. No response. Can't warning screen to stop jumping whenever I have access to the in

  I was on facebook and clicked on a link to a recipe (went there before). I had a start to screen popping up saying repeatedly I had ad/spyware and necessary to call 1-800-893-4975 (supposedly to support technique apple) to find out how to remove it. I was suspicious so I used my landline to call the number. There was no reply or a message. It is also on the screen: www.issue.safari.net.

  I don't know if it is a type of scam. My support of apple technology has expired and cannot find any phone #/ email I can use to communicate with them. I also can't find anything online. I can't get the screen to stop appearing when I go on the internet on my phone.  Can anyone help? I'm not all tech savvy.

  It's a scam. Do not call the number.

  Double click on the Home button, and then drag upward on the preview of Safari.

  Go to settings - Safari - clear history.

  Restart Safari.

• I'm doing a Shell call Firefox in the directory C:\Program Files (x 86) of \Mozilla FireFox\ and LabView shell call gives an error.

  I'm doing a Shell call Firefox in the directory C:\Program Files (x 86) of \Mozilla FireFox\ and LabView shell call gives an error. I can go to the BACK shell and make the fine call, but Labview Shell gives several errors. Anyone know how to get around the problem of directory with the name of the Program Files (x 86) directory with space and the (x 86) BACK doesn't seem to like?

  You must use quotation marks.

• I have just started with a new internet provider and get phone calls from a source to say that they are windows and the need to access my computer because its infected in windows. It is this true.

  I have just started with a new internet provider and get phone calls from a source to say that they are windows and the need to access my computer because its infected in windows. It is this true.

  No, it's a scam, ignore the call.

  Just hang up, they are trying to steal your information or to install a virus on your PC.

• Is there a simple and quick way of deleting these temporary files?

  To clear my comp. congestion and help speed up my PC, my ISP told me to put temp5 Prefetch and % and Temp in start-run to delete the temporary files. It's a bit long-winded that each group must be deleted separately. Disk Clean up does not get rid of them. Is there a simple and quick way of deleting these temporary files? Thanks Brian

  To clear my comp. congestion and help speed up my PC, my ISP told me to put temp5 Prefetch and % and Temp in start-run to delete the temporary files. It's a bit long-winded that each group must be deleted separately. Disk Clean up does not get rid of them. Is there a simple and quick way of deleting these temporary files? Thanks Brian

  Delete the contents of the prefetch folder will not help speed things up.  In fact, it will probably slow things down.  See http://answers.microsoft.com/en-us/windows/forum/windows_vista-system/can-i-delete-the-data-in-the-prefetch-folder/c54a8e56-c8cf-451d-a88f-07f06a2f2d54
  I guess temp5% is a typo and you really wanted to say %Temp%.  Percent signs indicate that it is an "environment variable" with the usual value of C:\Documents and Settings\, yourusername\Local Settings\Temp

  The directory specified by %Temp% is, in fact, the directory cleaned by the cleaning of record under the name "temporary files".  Why do you think that disk cleanup is not delete files?  Note that disk cleanup does not remove the files in this directory which came in the last 7 days (this period may be changed by changing a registry value).

  What disk cleanup does NOT, however, is to clean temporary files, files for the Internet browser cache and other files in places of profile-specific to the user of different profiles that you are currently using.  Disk Cleanup also does not delete the contents of C:\Windows\Temp (although it doesn't fill up with very much).  C:\Windows\Temp is the directory that appears when you type Temp in start > run (without the percent sign).  And, of course, disk cleanup will not empty the cache of the browser by non-Microsoft browsers, e.g. Firefox.

  There are third-party applications that make a "deep" cleaning  Some of them clean files of all users without having to login to each profile separately.  Most understand the characteristics that you should not use.

  Here are 2 - there are others, but I haven't used.

  ATF-Cleaner  (do not delete prefetch)
  CCleaner (do not use the registry tool)

  You might be interested in "How to automate the disk cleanup tool in Windows XP"

• Error: [810215] MakeDecision method is disabled and cannot be called.

  Hello!

  Odd error here: I am trying to call a method named "MakeDecision" in the Web Designer PersonWantsOrg cutomizer. For a few hours, I get the message "error: [810215] MakeDecision method is disabled and cannot be called. '. I can't explain it to myself, because this call works very well for a long time... anyone have an idea why this message is triggered? Or where I can see the status (?) of the method? Or, which changes the status?

  .. .and Yes, I compiled everything... several times... honestly

  Thank you very much

  Norbert

  Hi Norbert,.

  suggestion:

  Use the method "FillOrder.

  With this you are able to create a new PersonWantsOrg object and can set each property (including the OrderState).

  You must set a PropertyBag object (which contains all the properties for the new object of PersonWantsOrg), you create a new (empty) PersonWantsOrg object and call this method. The PropertyBag object is needed as a parameter to the method.

  Disadvantage: The method works only for execution by a Jobservice.

  That's why I suggest:

  Your "One-button-click" fires an event for the object selected in the PersonWantsOrg.

  You must create a process for this event, this process contains a ScriptExec job. This work calls a script with the following behavior:

  -a single parameter (UID_PWO_Source)

  -load the source object

  -fill in all the important properties of this object in a PropertyBag object, add additional properties (for example OrderState = Assigned)

  -create a new PersonWantsOrg object

  -call the method "FillOrder" for this new object and use the PropertyBag object

  The result is a new PersonWantsOrg object that is finally approved.

  I hope it helps.

  Kind regards

  Steffen

• Cisco Jabber CDR analysis and reporting: the lost packets and other info call stating "Null."

  Hello

  I have recently setup Cisco Jabber Setup and make a video call between Mac and Windows laptop. When I go to the CDR reporting, I can find my call details when I search after the end of the call. However, I see lost packets, jitter, latency as Null.

  I looked in the support forums and made all the required configurations such as going to service settings and allowing the call diagnosis. I also uncheck CDR load only one box, but not seeing any information other than the ip address and the details of the bandwidth of VideoCAP.

  Am I missing something?

  CDR.png

  

  No, the CMR is not implemented in any current version of Jabber, the next version of Jabber will be the first to have * some * RMC capacity.

  What you see at the present time, is the expected behavior.

• Courses and non-traversal calls

  Hello

  Can someone explain in simple terms what are courses and non-traversal calls?, what is the difference? And also the VCS control below must traversal licenses?

  CTI-VCS-CONTRL-K9

  Control of VCS

  Thanks in advance.

  If you have two endpoint C-series (i.e. CTS-SX20) both recorded on VCS control and also capable of reaching out directly between them (a routing), then in general the call will address as non-traversal call Endpoint, so no license courses will be necessary.

  However if these Endpoint calling each other, but using different protocol (i.e. an end point registered in VCS control only with H323 and other endpoint registered on the CV with SIP), or different IP version (that is to say one with IPv6 and other with IPv4 registration), then control VCS remain media routing in order to manage such scenario of interoperability which will require licensed traversal appeal.

• There's that one button and a single call back could be defined in a toast using HTML5?

  Dear all, I have read the toast associated documents and ask yourself who is only a button and a single reminder could be set for a toast using HTML5? I want to display three buttons and defined three call back for my bread, is possible? If it is not possible to use the toast to do this, how could do this using another approach? Your comment and suggestion would be very useful. Thank you https://developer.blackberry.com/html5/apis/blackberry.ui.toast.html

  Toasts are really intended to be notifications from style UI components. That's why we provide a button if you want some specific user recommended. But they are not designed to be a notification of modal style.

  If you want to display several options for a user to select, you can use a dialog box according to the following documentation:

  - https://developer.blackberry.com/html5/apis/blackberry.ui.dialog.html

  You can take our HTML and CSS and make your own toast and just show/hide div as you wish if ours is not flexible enough for you.