Facility agreement cannot produce > 2.8 MB

Similar Questions

• Cannot produce sound (JBL flip) bluetooth speaker

  Hello

  I have a bluetooth speaker portable flip of JBL that works very well with my smartphone etc.  My phone (Samsung, windows 7) connects with her and identifies it as a bluetooth headset, but I can't play the music through it all.  The laptop does not recognize as a 'reading device' or a piece of hardware in the 'sound' section of the control panel and I can't seem to make it work at all.
  Any ideas anyone?
  Thank you very much
  Mike

  Hi Michael,

  The problem could be caused in the Volume settings, the sound card or the driver.

  . Have you checked the issue with different laptop?

  Follow the steps below:

  Method 1:

  Try using the Audio playback problems troubleshooting to solve the problem. It search common problems with your volume settings, your sound card or driver and your speakers or a headset.

  Tips for solving common audio problems:

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

  Method 2:

  Try to install the drivers and check the status.

  Updated a hardware driver that is not working properly:

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 3:

  Once you've paired (connected) a device with a compatible Bluetooth Bluetooth computer, you can change the name of the device or enable or disable services for it. You can also control how your computer with this and other Bluetooth devices compatible pairs.

  Change settings for a Bluetooth compatible device:

  http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-a-Bluetooth-enabled-device

  For reference:

  Add a Bluetooth device or other wireless or network device: frequently asked questions:

  http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-or-other-wireless-or-network-device-frequently-asked-questions

  To learn more:

  Contact the JBL Support:

  http://www.JBL.com/eStore/JBL/us/support/SPDP.jsp?pid=JBL FLIP  

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

• I cannot produce a "DVD with titles", 4 slide shows.

  I selected slideshows and begun the process in DVD to post-secondary studies. I found that the PSE will only accept slide shows in 1 group and will not let me add slideshows later (not support and/or codec missing). Some slides get turned to 90 deg when put in PSE and a photo is not accepted, even if it is in jpg format, which are all other photos. Unclear why this should be.

  Initially tried to combine slideshows with vidoe project (of which the aide said guide is possibel), but to find any which way I started (slide show or video) format added is considered bundles. Can't see why there is a problem.

  Do you mean the Premiere Elements? You can not any kind of DVD video in PSE, only the horrible VCD format. PRE has its own forum, which is here:

  http://forums.Adobe.com/community/premiere_elements

  and you will get the best answers to questions PRE it. Good luck!

• Flash cannot produce wingdings on Vista machine?

  Several months ago, I created several flash files that use a checkmark wingdings.  Recently I had to update these files, and each of them now appear as equivalent to Arial (u-umlauted).  It shows that the umlaut in FLA and SWF.  Selecting the u unlauted, looking at properties confirms that the police is set to wingdings.  Copy of a check mark of wingdings off another app and paste it into Flash, it replaces immediately for the umlaut.  In fact, change to any font just makes a slightly different umlaut.  The simple question is, ' what has changed between when he worked, and when he's not? ' and the answer is that I'm not sure.  This is the same installation of Flash, the same machine, same OS, etc.

  I tested with their colleagues.  Those who open the same exact file on XP machines see the check mark.  Those who open the same exact file on other Vista machines see umlaut.  I have an XP machine on my left and a Vista computer to my right, and I see a check mark both an umlaut off the coast of Florida even

  I tried Googling help and I see a few reports of the present.  It always seems to involve Vista machines, but Vista was not yet considered (that I saw) as the culprit.  Suggestions usually emphasize Wingdings is not being installed, or the need to incorporate the police, etc.  With the process of elimination, that we used, Vista actually seems to be the antagonist here.

  We can fix it pretty easily... have someone with XP manage the publication, or the check mark bitmap, etc..  But I wonder if anyone has come across this or know what aspect of Vista does not play well with Flash?

  THX!

  If you have not incorporated the police into the textfield (s), then you should.

• Cannot install new software because XP has said that there is another current installation

  I try to install the new software of the printer and it stops telling me that there is an another current facility and cannot install new software until the current instalation ends.  She does whenever I try to install new software.  He did it with zune, Quicken, etc.

  Hello

  1. have you you can all changes on the computer before this problem?

  Check if the problem persists in the clean boot state.

  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

• AC adapter - alert - 'type and power adapter AC power cannot be determined.

  It is a problem common (I see a lot of messages)

  The source of the problem is the AC adapter [Dell].  PA - 21 family, 65 w, P/N: NX061.  It is made in China.

  I have a XPS M1330.  Assistance from Dell after a warranty repair, replaced the motherboard twice, both times to replace the battery, replaced the twice - AC adapter is not fixing it.

  It turns out that the warning of power is very informative.  It says "please connect a Dell 65W adapter or greater for best system performance.  So, I plugged my adapter 95W Dell - WOW, problem solved.

  A laboratory of my new Dell AC adapter 65 test indicates whether 64.6 watts.  If this appliance becomes hot (such as after several hours of use), it can not put on full 65 Watt - the system may not recognize the adapter, it can power the system ok, but will not charge the battery.

  These units burn out after only a few months of use. The cables are too fragile. If Dell or their quality control provider cannot produce a reliable 65W - I found seveal universal adapters "Made In USA".

  Well, my solution was simple.

  I just removed the battery and turned on my laptop. Then I turned off the laptop has replaced the battery and VOILA. The error message disappeared.

• Firefox has been sold as a response to open source IE which was considered safer. Your constant update belies this late summer. Do you intend to continue?

  Your alleged that produce a browser open source to ensure security and free internet access. Your constant security updates shows that you are not able to keep that promise. Can you tell me if it is still a point to the production of Firefox? What is your reason for being, or did fall you into the syndrome of "march of dimes". Once Polio has been overcome, the mechanism of 'The March of Dimes' might not go far, whereas they had to get somewhere different and informed on preterm birth. What is Firefox done? You cannot produce a secure browser, so you changed your goal of existence. It would seem that you should all go to work for Microsoft and helping them improve their browser. Together, you can create something really resilient.

  The mission of Mozilla is described here: https://www.mozilla.org/mission/ the design and evolution of Firefox and other Mozilla products is directed toward the fulfillment of this mission. But bugs happen, and therefore dispense with bug fixes. You can't be constantly push the limits and not to make a few mistakes along the way.

• Portege S100 - 7B code downtime when installing XP

  Hello

  I have a Toshiba Portege S100, I'm doing a fresh install of XP on it.

  Installing XP recognize the hard drive very well and has completed the installation of XP, but when it restarts I get a screen of 7 Blue b a few seconds after having reached the XP loading screen. I tried with a disc XP slipstreamed with the Toshiba RAID drivers added as well as the F6 during installation to add RAID drivers manually. Same result.

  I also tried to run the installation with the RAID JBOD unit and 1RAID-0, same result. I tried different hard drives and I also tried in other S100 (we have 4 here to get XP on.)

  I hope to get some fresh ideas on what it feels like I've been watching the same index of crossword 4 days if you know what I mean.

  Kind regards

  Danny

  > Installing XP recognize the hard drive very well and has completed the installation of XP, but when it restarts I get a screen of 7 Blue b a few seconds after having reached the XP loading screen

  I doubt that this BSOD can be linked to the RAID or RAID settings driver since the Windows operating system has recognized the HARD drive and the installation could be completed.
  There must be another reason why
  However, you can also try to disable RAID in BIOS as well and then you could check how the facility would be produced.

  What CD of Win XP did you use? This disc includes all service packs?
  It must contain the SP1 and SP2 min.

• How to move a Time Capsule backup to a new hard drive

  I've been running Time Capsule on an external FireWire drive Yosemite 10.10.5 running on a MacPro to 2012. It will allow more to perform backups and disk utility fails to remove the disc. When I run the disk repair, either via the recovery disc or a USB flash drive, they are not able to repair the disc and gives me the message: "exit code is 8." The suggestion is to backup the drive and then wipe and restore. I tend to remove the hard drive because it is the second time this has happened; the first time I erased it and started the Time Machine backup everywhere with the same external drive.

  However, I am about to upgrade to El Capitan and certainly want the option to return to Yosemite if necessary.

  What should I do to transfer the contents of the hard drive damaged to a new drive and always make sure that my computer recognizes it as a backup Time Machine valid? I can clone it right on a new external hard drive?

  Thank you!

  Yes, it clones if the drive is still ok.

  On a MacPro, you have plenty of space for a real drive... or you can buy a USB key and just to make the clone.

  However, my recommendation is to download and run Carbon Copy Cloner. You get free trial use 1 month anyway. Clone startup current Mac to a USB drive or internal hard drive. And make sure it is bootable... that makes it simple to restore a computer to your old operating system running. TM cannot produce a clone bootable... nor can utility that can clone a drive but not to create a boot disk drive.

  Just keep the current firewire drive as that is the TM backup... I really doubt that you will get no improvement it cloning.

• Satellite Pro L20 - no color on TV

  Satellite Pro L20 PS25E with mobile Intel 915 video card is connected to the PAL TV and gives only bw image. Settings to PAL BG in the video card, yet only B & W photo. Other forums say this photo card ALWAYS give NTSC and cannot produce the PAL color. Is this true?

  Hope that no, I bought three laptop computers of this type and was eager to connect to the TV in the House. Any help appreciated ;)

  Hi retrieber_1,

  Usually if you get only a black & white picture it's a wrong output setting of your laptop. I think that it s something wrong with the settings PAL and NTSC.
  As a first step, you must update the display driver. Latest you can download from the Toshiba page driver.

  And what cable you use for this connection? S-VHS cable?
  If so try another cable. Use a cable of high quality, especially if you have a cable long enough.

• Graphics in Suse 9.3 on G20 problem

  Hey there,

  Ive been running Suse 9.3 on my Qosmio G20 for almost a year now. When I installed initially, I had some problems with the graphics which has been solved by installing the appropriate nvidia linux drivers. Everything works fine UN until recently. The problem came back again. It seems that when you open windows program they sometimes give a strange effect making the screen sometimes almost unusable. Ive updated the drivers according to the instructions from nvidia through YAST, but the problem persists. The only thing I can think is that this problem started to occur when I've reconfigured the wallpaper to use some advanced graphics. Its all very strange and annoying at times. Someone has similar problems or solutions?

  Ali

  Hi Alistair

  The problem is that Toshiba doesn't support Linux and there is also no driver Toshiba for Linux.
  The Toshiba recommend always using graphics Toshiba drivers, because these drivers are specially designed for the use of the laptop and another graphic driver can damage the graphics chip due to overheating.
  Graphic drivers of Toshiba control performance graphics and its use. In this case, the graph cannot produce a high level of heat.

• Satellite A200 use external battery

  Hi all.

  I have the Satellite A200-PSAE6E, and I bought a universal external battery. But external battery cannot produce enough current to my laptop when the internal battery is not full. When internal battery is fully charged, external keeps it full and portable computer running, but when the internal battery is not complete and I plug the external battery in seconds laptop shows that it is plugged in, charging the battery, but after a few seconds, it shows only that the laptop is plugged, and battery charge.

  Problem is that when the laptop is plugged in and the battery won't charge it uses an internal battery (as when it is not plugged in), and it drain the internal battery it turn off and there was still shows that it is connected. Can I define that when the laptop is plugged in, but does not charge to use external power?
  I'm sure it's only the software solution.

  You ad is really confusing

  I have a question; Is the external battery designed for this model of laptop and Toshiba recommends use this external battery in your laptop?

• increase the volume on the mini?

  How can I increase sound volume from the macmini. This is a new mini, bought a few days ago and I am surprised by the low volume. I tried the following and it has not increased at all:

  1. go to your applications folder

  2. open the UTILITIES folder

  3 Open Audio MIDI Setup

  4. go to WINDOWS (TOP MENU bar)

  5. Select - display THE AUDIO

  6. click on the ICON's OUTPUT BUILT-IN

  7. the SOURCE must be INTERNAL speakers

  8. the FORMAT - select 96000 hz

  It seems that you are talking about the internal speaker. If so, it is very small and cannot produce loud.

  If yo go to System Preferences > Sound > is the output volume slider slipped at Max output?

  You can connect a standard powered PC speakers that have a 3.5 mm plug. Make sure that plug you into the headphone jack and not taking line-in

• Digital reading Pulse with PCIe 6509

  Hi all

  I'm trying to decode an infrared control using the PCIe 6509, but I've no chance that a signal from a remote control. It seems that when I use the VI of change detection, it does not generate the interrupt, but it cannot produce enough it fast to create a template to use with the reading VI Daqmx. Does anyone know if something like this is possible? The idea is to make the PCIe 6509 generate a digital output signal for each key different on the controller.

  Thank you!

  Kenny

  Arduinos are often used.  There are a few boxes to software tools out there like LIFA and Lynx.  Then you just need a serial port to communicate.

• Problem SCON 8051

  The following program is unable to reach good results. I find the problem with oscilloscope as "the PIN TXD of 8051 cannot produce clock to exit", in fact, it should provide for outdoor clock, after "MOV SCON #10 H.

  Is this a bug of multisim?

  ORG 0000H
  AJMP START
  ORG 0100H
  DEPARTURE: CLR P1.0
  SCON MOV, #10 H
  SETB P1.0
  JNB RI $
  MOV A, SBUF
  MOV P2, HAS

  SJMP START
  END

  Hi Yufei,

  Thank you for your schema. I found the problems and got them fixed, the first is the way in which you use the 74HC165N.

  

  According to the datasheet (connected to the last), CP is the clock (CLK) signal, PL (low enable) is to load the data(SH/~LD), THIS (low enable) is to allow the clock (INH). On your diagram, you have not activated the clock, that's why you don't have the output to the end QH.

  To fix it, lower the level of logic to INH (15 pin) when you want to send signals.

  

  The second problem is the clock to TXD signal. Real serial communication, must exist. But here in Mulsitim, we already build it inside the simulation. It is no need to care about this now, just as there is no need to add an external oscillator between XTAL1 and XTAL2 of the MCU ends. But, here, we must add the clock using the function generator to the 74HC165N.

  

  

  Run the simulation again, set 8-bit information and pull downwards of INH to send it. You can then see it displayed.  :-)

  Attached are the modified file and the data sheet 74HC165N.

  Hope this helps!  :-)