Factory restore the device?

Similar Questions

• Omen of HP 15-5000na: \Device\RaidPort1, restore the device, has been published.

  Hello

  My computer laptop freezing from time to time for 15-20 seconds (about 8 - 9 times per hour). When the gel it is impossible to make any disc operation, that is, open the file, or start the Explorer... the disk in the Task Manager activity is 100% reading.

  The only thing I found suspicious is a message in the event viewer / newspapers Windows / system that says:

  -------------8<--------------------------

  Source storahci

  Event ID: 129

  Text is: restore the device, \Device\RaidPort1, has been published.

  -------------8<--------------------------

  I search on google for that matter. I have set up my power plan high performance with settings for "PCI Express" / link state power management 'Off' (was befor change moderate energy economy)

  But this has no effect portable stell gel.

  I have no other choice for any type of RAID in my BIOS and my HARD drive is SanDisk SD6PP4M - 256 G-1006.

  SanDisk dashboard software indicates that the SSD is O.K.

  Windows 10 updates and drivers are up to date, also I flashed the BIOS to the latest version

  Any ideas how to solve this annoying gel are welcome, I will try all of them.

  Kind regards

  spetrov

  Hi go2.

  Thank you very much for the detailed information.

  I installed the hp support assistant and this software updated my drivers for more later you mentioned in you post.

  I can't find how to rebuild my raid (which I don't have) in the Intel Rapid technology software, there are only a few options awailable in this software and none of them can be used to rebuild the raid.

  However, I managed to solve this problem with the activation of additional options for power plan settings for hard drive

  named "AHCI Link Power Management - HIPM/DIPM" registry and then, after that the options are visible in the settings of the power plan, set options for DIPM (HIPM is not taken in charge of my hard drive).

  This link provides information how to activate this option of additional hard drive in the power plan settings and how to change them.

  http://www.SevenForums.com/tutorials/177819-AHCI-link-power-management-enable-hipm-DIPM.html

  Best regards, spetrov

• Source:-elxcna (adapter Emulax CNA) event ID:-129 error:-\Device\RaidPort1, restore the device, has been published.

  Hi all

  Source:-elxcna (adapter Emulax CNA)
  Event ID:-129
  Error:-\Device\RaidPort1, restore the device, has been published.
  Server:-Server Rack, Windows 2008 R2
  Installed application:-installed Backup tool and IBM tape library connected by Cisco nexus switch

  Summary:-each time the backup tool initiating any SCSI command etc. for library of tapes, just after a few minutes in the event log, server shows "restore the device, \Device\RaidPort1, has been issued." and the tape library configured in backup tool disconnected from the physical tape library.

  Up to now steps below was taken but no luck:
  1. test Unit Ready has been disabled in the registry
  2 adapter ANC, fresh of zoning has been replaced.
  3 firmware and driver from the adapter of the ANC has been updated.
  4. timeout was defined according to the guidelines of this document:- http://blogs.msdn.com/b/ntdebugging/archive/2011/05/06/understanding-storage-timeouts-and-event-129-errors.aspx

  Comment:-26 fev 12:00 Am, I put to tape library firmware update and then we got
  This 129 February 26 event id error 03:00.

  Need help? :)

  Hi SabarnaDeb,

  Thanks for posting your query in the Microsoft Community Forums.

  As the question is limited to Rack in Windows 2008 server, it is better suited for the IT Pro TechNet public. Please ask your question in the Forum on TechNet Support.

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer

  I hope it helps. If you have any questions about Windows in the future, please let us know. We will be happy to help you.

• \Device\RaidPort0, restore the device, has been published. Event ID: 129 storahci

  Hello

  I have a DELL XPS 13 9343.
  I did a clean install of Windows 10 and downloaded the drivers from dell.com.
  I am also running Hyper-V.
  I'm repeated warnings in my saying system Envent Viewer:

  \Device\RaidPort0, restore the device, has been published.
  Source: storahci

  Just before I get these events my computer freeze for 10-20 seconds and I can´t anything.
  It's very annoying, and I hope there is a fix for this?
  Thanks in advance.

  I had exactly the same problem on a lot of my dell systems. Here is how I solved the problem:

  First we need to change ""AHCI Link Power Management " which is a setting hidden in power management." Open the registry editor and change the following settings.

  HKLM\SYSTEM\CurrentControlSet\Control\Power\PowerSettings\0012ee47-9041-4b5d-9b77-535fba8b1442\0b2d69d7-A2A1-449c-9680-f91c70521c60

  Change 1 to 2 attributes

  HKLM\SYSTEM\CurrentControlSet\Control\Power\PowerSettings\0012ee47-9041-4b5d-9b77-535fba8b1442\dab60367-53fe-4FBC-825e-521d069d2456

  And again change the attributes of 1 to 2.

  Now, go to the Control Panel-> system and security control-> Power Options , click on "Change Plan settings" and then click on "change power avancΘs."

  Now under "Hard disk", you should have AHCI Link Power Management - HIPM/DIPM and AHCI Link Power Management - Adaptive options.

  
  Change the 'AHCI Link power management' active, meaning that there is no AHCI power management and finally change adaptive to 0 milliseconds (well if you have enabled "active" this option has no effect).

  Finally under "PCI Express" change "Link State Power management" to OFF.

  I hope this will help you.

  Good luck!

• Choose to restore the device on itunes or the device?

  I don't know where the box restore or update will appear!

  Please you can rewrite your question because I do not understand. You try to restore your iPad?

  Marco

  UPDATE: just saw the Summit. You forgot your password. Connect your iPad to your PC and then click on restore in iTunes. You may need to put your iPad into DFU mode well. To do that follow these steps:

  • Connect your device to your computer with a USB cable.
  • Turn off the device.
  • Hold the Power button for 3 seconds.
  • Hold the Home and Power buttons for 10 seconds.
  • Release the Power button but keep holding the Home button.
  • After that 15 seconds, you will be alerted by iTunes saying that it has detected a device in Recovery Mode.

• How to restore the devices with removable storage "missing icons

  HelloW sir This is krivy! for some time more I'm months local disk G not displaying don't not its icon (devices with removable storage) totally absent I m so depressed about this because I m unable to put my pen-drive & usb Cables & having so much work to the system that has information in the key USB sir could you tell me a solution for this problem

  Hi krivy,.
   
  Method 1: Check if the drive is visible in disk management.
   
  a. right click on my computer > Manage > Disk Management > right click on the removable storage drive and select Change drive letter > select a new drive letter not already in use.
   
  See if that helps.
   

  Method 2: Run the troubleshooter from the link given below and if that helps.

  Hardware devices not detected or does not

• What restoration brings back old bags in the device? I was always told that icloud restoration brings all the bugs back, yet care apple lately told me than vice versa. I'm lost in a cleaner for restoration of backup: icloud or itune?

  What restoration brings back old bags in the device? I was always told that icloud restoration brings all the bugs back, yet care apple lately told me than vice versa. I'm lost in a cleaner for restoration of backup: icloud or itune?

  I've never heard a backup report bugs, however if you are interested in, you can always restore the device as good as new.

• Cannot restore the portable computer Satellite Windows 8.1

  I have recently acquired some malware on my laptop, and after several failed attempts to remove it have decided to try to restore the device to factory settings.

  Unfortunately, I don't create backup media when the laptop was new and the recovery media creator appears only to create a cover for the system as it is.

  I tried to update the laptop using recovery tools built-in, but got an error "the drive where windows is installed is locked. Unlock the drive and try again."

  Then I tried a reset and got "failed to reset your PC. A required partition is missing. »

  I have created no recovery media when the laptop was purchased, do not not this.

  I don't have a system image 'clean' for a system image recovery.

  I do not have a restore point created earlier for a restoration of the system.

  Auto repair seems to only deal with problems of boot of the system, but still had an error "auto repair could not fix your computer" as I was trying anything at this point.

  Please can anyone offer any advise of any other route that I could take to restore factory settings.

  Thank you

  EH... it is a quite complicated situation now. Problem is that there is not a special workaround solution and you can not force installation of recovery image. Either it works or not.
  It is a pity that you don't l l create recovery media. It is the first step that everyone should do after the purchase of the laptop. This recovery media can be used in complicated situations.
  > Unable to reset your PC. A required partition is missing
  For some reason tool recovery doesn't have access to the recovery or recorded data recovery partition.

  What can you do now? To be honest, I see only one solution: order the new original recovery media for your laptop model. It can be done on https://backupmedia.toshiba.eu/landing.aspx

• Cannot restore the backup to iCloud. Stuck on "remaining time: estimate.

  I bought an iPhone 6s a month ago. Saturday, the screen is dead - they said it was a bad card, so they gave me a new. Initially, the restoration of iCloud seemed to work very well, but some of my app data has not loaded up. These data are really important to me, so I thought I could restore the device again and see if it would transfer the data. Now it is stuck on "remaining time: estimated...» "FOREVER.

  I tried the hard reset a dozen times. I tried to restore back to factory settings. I tried to load the old backups. No matter how long I leave Restoration - I left it all night - I I found with the message "cannot restore backup iCloud," no matter what backup I use. I talked to Apple Care. No one can understand why it does not work. The guy at the Genius Bar said it might have to do with the fact that my carrier settings were not switched correctly when they gave me the new device. He has updated and was told to wait another day and try again. I did this. It STILL gets stuck on screen and didn't budge!

  What could possibly go wrong? Why does a job the first time and now this? The only thing I can think is that it is a problem of iCloud... So frustrating! Help, please!

  Backups - topic

  Backup - restore your device from an iCloud or iTunes backup

• I lost the code for the option menu 'limitations' of the iPhone 4, how can you do then? so I can come and factory reset, it is a 4 digit code, so I can be able toexample factory reset the phone, don't know if this is the right forum for my question but

  I lost the code for the option menu 'limitations' of the iPhone 4, how can you do then? so I can come and factory reset, it is a 4 digit code, so I can be able toexample factory reset the phone, don't know if this is the right forum for my question but

  Sorry, but the restriction password cannot be reset, it is part of the backup and restore a backup that was taken after the restrictions were activated, restore this code again.

  You will have to start without the help of the data backup, configure the phone to factory settings and start over. Follow the steps mentioned in this article:

  Use iTunes to restore your device to factory settings - Support Apple iOS

  If you lose or forget your password restriction, you must erase your device and then put it up as a new device to remove the restriction password. Restore the device by using a backup does not delete the access code.

  copied from: Sur les Restrictions (parental control) on iPhone, iPad and iPod touch - Apple Support

• Back up and restore the iPhone of my mother

  Hello.  My mother just got his iPhone Unlocked, but it must be backed up and then restored as a new device and then restored again from a backup.  It has its own Apple ID, but does not have a computer.  If I connect the iPhone to my iMac, my iTunes opens, but it is based on my username.  How can I do this using his user ID?  If I can't then what should I do?  Please let me know this afternoon, if you can.  Thank you.  Jerry Ritt

  Backup the device the same as you would yourself. iTunes will take care of everything for you. I use my iMac to back up my devices to families who use four different ID of Apple and iTunes keeps everything separated and organized. Note that if you intend to restore the device from backup, it must transfer purchases to the Mac if your mother has applications that you do not on Mac. Alternatively, you can use iCloud on his device to create the backup, and then use iTunes on Mac to restore the device to unlock, and then restore the backup to iCloud. In this way your data of mothers never get on your Mac.

• Restoring my iPhone will restore the SIM card?

  I want to restore my iPhone 6, but then I still want to be able to use it just like before. If I restore my iPhone with the SIM card in the phone, going to happen whatever whether in the SIM card, which makes it so I can't use it is phone capabilities?

  Restore the device has no effect on the SIM card.

• Software BlackBerry Blackberry link cannot communicate with the device (Z10 and MacBookPro)

  I've just updated my Z10 software to version 10.0.9.2372 by link of BlackBerry OS on my MacBook Pro, and since that time, I can't get the link to communicate again to my Z10. Even an attempt to "Restore the device" is insuccessful as the error: "canoe repair of error" appears during the process. (Believe me, it is the real spelling of this error message!) can anyone suggest a solution? (Yes, I re-installed the link on my mac, rebooted the phone numerouis times, disconnected and re-connected the USB cable, without success.)

  Problem solved! I found that link to 79 BlackBerry update build on my MacBook Pro, I am now able to connect to my Z10.

  I hope this helps those who have the same problem.

• new hard drive G41, factory restored, now stuck to always start at R &amp; R

  G41 2886-79U with XP Pro.  Hard drive died last year, still under warranty then took to an IBM service center.  They have replaced the hard drive under warranty and gave me a set of R & R and product recovery CD.  Laptop computer R & RL ran OK for about a month.  He started to be right about the time when my warranty has expired, becoming slow example, 45 minutes to start.  Random crashes, most often when closing programs, the error message this program could not write to the hard disk.  Frequency of accident back.

  Abandoned, taken from the hard drive to install a new hard drive.  [Hmmmm, I notice that they in fact did not replace my original with a new drive, this drive warranty-replaced has a sticker saying "Good used State party"].

  Installed the new HD, started using the CD R & R, then followed the six guests R & R factory restore since the product recovery CD.  After the sixth disc, message box saying it needs to restart the PC, you click Yes or no.  There is no direction to remove the CD from the drive, at this point.

  It restarts at the R & R window, with the popup of restore factory warning that the product recovery program is only for the unrecoverable system problems.  This looks at where we started the process of factory restore, there are seven CDs.  Choices here are OK, Cancel, or help.  Clicking OK brings you back at the beginning of the factory restore procedure.  Cancel on your vacuum on the main R & R screen. By clicking on restart here restarts once again to the screen of Rescue and Recovery.

  Now the G41 is stuck, still boots to R R & does not start in XP.

  I pulled the HD and installed temporarily in another PC that has a floppy drive, this allowed me to start with Partition Magic.

  R & R 3 partitions on the new disk as follows:

  1. the label is IBMPSP, Type FAT32, size = 406 MB, used (s) = 290,4 Mb, status = None, Pri/Log = primary.

  2 no label, Type unallocated =, size = Mo 71738,8, used (s) = 0.0 MB, status = None, Pri/Log = primary.

  3 no label, Type unallocated =, size = Mo 4171,3, used (s) = 0.0 MB, status = Active, Pri/Log = primary.

  On this PC, I let him try to boot from the hard drive and got the message "Missing Operating System".

  I put it in the G41, it starts at IBM Rescue and Recovery as before.

  I've searched the web and this forum looking for this same issue, have not found something exactly like this.

  If anybody out there knows how to get a new HD to market, let me know.

  Thank you, Don.  I found the idea on another forum of Lenovo.  So far things are working OK.  The other hard drive will be float-tested as soon as I do not know there is nothing on it that I still need.

  As the professor said, it's just not intuitively obvious to the casual observer.

  A note, when the PC was bought, it came with Norton Antivirus installed, long expired.  After the factory restore, the Nortonware registered with the site of Norton and apparently it has been recognized as a new installation and got the last update.

• I changed my apple ID and password user name and it changed on 3 of my devices. I have a 4th device, which still has the old user name and password and I am not able to change it. I can't restore the phone to factory settings unless I can connect.

  I changed my apple ID user name and password on 3 of my devices. I have a 4th device, which still has the old user name and password and I am not able to change it. I can't restore the phone to factory settings unless I can connect.

  OK, just to clarify: you always use the same Apple ID, but you changed its name, correct?

  If this is the case, you can go to iCloud.com or use find my iPhone app (free on the App Store) of one of your devices to remove the 4th icloud.