Failed to initialize at startup in Vista

Similar Questions

• exe application 0xc000007b application error failed to initialize properly on startup.

  Original title: exe application 0xc000007b error

  Hello

  When I start my computer, I receive. (exe application error the application failed to initialize properly 0xc000007b)

  Thank you

  James

  Hi James,

  1 - is the complete error message you receive?

  2. did you of recent changes on the system?

  Check the behavior by starting the computer in a clean boot state.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  If the problem does not persist, you can continue with step 2 from the link above.

  After the troubleshooting steps, please refer to clean the boot link to put the computer to normal startup mode.

  Hope this information is useful.

• I have a new Vista Ultimate. When I try to activate Windows Defender, I get a message «Failed to initialize 0x800106ba»

  I have a new Windows Vista Ultimate. When I try to activate Windows Defender, I get a message «failed to initialize 0x800106ba»

  Hello

  read this information on the Defender:

  ·                         If you use microsoft security essentials avg avira mcafee norton etc they disable the vista version of windows defender by default

  the basics of Microsoft security has its own version of windows defender

  and other anti-virus programs use their own particular type of application to scan for spyware and malware

  It of nothing to worry and is the default action, which is designed for them to do

  ________________________________________________________________

  If the above does not apply to your machine to read the information on the below link on how to disable the windows defender service in vista or make an autostart to enable

  http://www.groovypost.com/HOWTO/Microsoft/Vista/disable-Windows-Defender-service-in-Windows-Server-2008-or-Vista/

  and here is the method to remove it from startup in vista

  http://www.groovypost.com/HOWTO/Microsoft/Vista/remove-Windows-Defender-from-Vista-system-startup/

  and this is how you would normally activate or disable windows defender in vista from within defenders of own and options tools

  http://www.groovypost.com/HOWTO/Microsoft/Vista/disable-Windows-Defender-for-Microsoft-Vista/

       and read this information to microsoft:

  Error message when you run Windows Defender: «Error 0x800106ba»

  http://support.Microsoft.com/kb/931849

  and if you need to change startup programs read this information on the other methods of doing it without using defender

  using msconfig read this tutorial:

  How to use MSCONFIG in Windows Vista

  Here's how to use MSCONFIG in Windows Vista to disable some unnecessary programs that load automatically at startup

  http://netsquirrel.com/Msconfig/msconfig_vista.html

  and also try this FREE program Autoruns:

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services more

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

• Error: failed to initialize DirectX when you try to play a game on windows7, which worked well on Windows Vista

  When I reinstalled the game "Anno 1404" I get the error "failed to initialize DirectX. The game worked perfectly on windows vista, but I changed to windows 7. I already reinstalled directX, but the message keeps popping up. What can I do?

  
  

  My laptop is a HP pavilion dv2000

  Windows Update has nothing to with the upgrade of Windows. Please post future questions about the upgrade in this forum: http://social.answers.microsoft.com/Forums/en-US/w7install/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Failed to initialize the management of startup programs

  When I try to go to manage startup programs I get a failure error initialization code #800106ab

  Hello

  How do you try to manage startup programs?

  using Windows Defender?

  If Yes, read this:

  read this information on the Defender:

  ·                         If you use microsoft security essentials avg avira mcafee norton etc they disable the vista version of windows defender by default

  the basics of Microsoft security has its own version of windows defender

  and other anti-virus programs use their own particular type of application to scan for spyware and malware

  It of nothing to worry and is the default action, which is designed for them to do

  If the above does not apply to your machine to read the information on the below link on how to disable the windows defender service in vista or make an autostart to enable

  http://www.groovypost.com/HOWTO/Microsoft/Vista/disable-Windows-Defender-service-in-Windows-Server-2008-or-Vista/

  and here is the method to remove it from startup in vista

  http://www.groovypost.com/HOWTO/Microsoft/Vista/remove-Windows-Defender-from-Vista-system-startup/

  and this is how you would normally activate or disable windows defender in vista from within defenders of own and options tools

  http://www.groovypost.com/HOWTO/Microsoft/Vista/disable-Windows-Defender-for-Microsoft-Vista/

       and read this information to microsoft:

  Error message when you run Windows Defender: «Error 0x800106ba»

  http://support.Microsoft.com/kb/931849

  and if you need to change startup programs read this information on the other methods of doing it without using defender

  using msconfig read this tutorial:

  How to use MSCONFIG in Windows Vista

  Here's how to use MSCONFIG in Windows Vista to disable some unnecessary programs that load automatically at startup

  http://netsquirrel.com/Msconfig/msconfig_vista.html

  and also try this FREE program Autoruns:

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services more

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

• When you try to run Halo 2 in Vista or Windows 7 get error "Gaming Live on Windows failed to Initialize"

  Hello

  I have recently upgraded to Windows 7 from Vista, at which point my Halo 2 Vista stopped working, give me a message "Live Gaming on Windows failed to Initialize."  The game would not start it gave me this error message.

  So, after reading a few suggestions and try to uninstall about everything, I started with a fresh new install of Windows 7.  The first and the only thing installed on the PC was Halo 2 Vista, but I got the SAME message.  I tried to update the game, all of the updates of Windows and Windows Live for Windows, but the game does not start.

  In addition, I tried http://www.microsoft.com/games/halo2/, however when the aid application and entering my product ID on the box it says there is a problem even if it is the same product ID, I turned on the game with.

  I am very angry at this point.  I really want to have to dual boot, especially as Halo 2 Vista lists as being Compatible with Windows 7.

  Take a look at these discussions in the forum for Games for Windows.
  http://forums.gamesforwindows.com/t/8958.aspx
  http://forums.gamesforwindows.com/p/8000/74420.aspx#74420
  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Dell Latitude 10 stuck on startup with engine failed to initialize security

  Dell Latitude 10, when I turn on the tablet.

  I get this message.

  Failed to initialize security engine.
  Contact your technical support representative

  Error code = 0 x 100000002

  Wait 3 seconds to reset the system

  How do...?

  What is the cause

  How to fix...

  It is more under warranty...

  any help and input would be appreciated a lot.

  Thank you

  txsgent

  Unfortunately, I think you're out of luck and that's a bad system or storage (which is integrated into the system board). We purchased about 200 of these tablets for our school and saw about 30 of them give this error message or show the symptom that the light next to the camera turns on and stays on and nothing never seems on-screen.

  For those who this happened under guarantee, the only solution was to replace the motherboard - a part Dell keeps in stock, if you don't have an extended warranty. I tried several times and they never have a source for me to buy new.

  We were extremely disappointed by the product and not buy an another Dell Tablet in the future.

• Failed to initialize correctly 0xc0000018

  I tried to connect via USB, click Execute and return this message:

  Application failed to initialize properly (0xc0000018). Click to close the application.

  I tried several cables usb, different programs and maintains that the return message. Any help would be greatly appreciated.

  Thank you

  Jon

  Hi jonpweaver2

  Thank you for using the Microsoft Answers Forums!

  Check the steps below to solve your problem.

  Step 1:

  Put the computer in a clean boot (namely if any third-party software hinders the process)

  http://support.Microsoft.com/kb/929135 ---> how to solve a problem by performing a clean boot in Windows Vista or in Windows 7

  Check with step 1 (run a clean boot):-If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.

  (Note: after find you the problem causing the program, you will have to perhaps to update or install a newer version of the program and also don't forget to put the computer to a normal startup)

  Step 2:

  You are able to see the USB device in Windows Explorer? If you are, then proceed as follows:

  Open the Device Manager e plug USB cable and look for the entry because it e right click and uninstall the USB device and then restart the computer and check.

  Step 3:

  Run an online Scan of your PC as well as your USB device for malware:

  If you want to scan your computer for malware and potentially unwanted on a Web site, please use the Windows Live OneCare safety scanner.

  Windows Live OneCare safety scanner is an online service that lets scan you your computer to protect yourself, clean and operate at its best. Use our free protection scan to check and remove viruses, spyware and other potentially unwanted software and to find vulnerabilities in your Internet connection.

  NOTE: Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Hope this information was useful.

  Let me know if it worked.

  All the best!

  Thank you and best regards,

  R uma - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Failed to initialize for the logon process

  My phone displays the following message when I turn it on (the screen is black, but this message shows): failed to initialize for the logon process
  The interactive logon process initialization has failed.
  For more details, please see the event log.

  Clicking OK doesn't do nothing, the message just keeps reappearing.  I tried stopping and starting Windows up in Mode without failure.  The message appears in Safe Mode, as well.

  Hello berniesun,

  You can give the Startup Repair to try to clear this error. I've included the steps located in the help section on all versions of Windows Vista. If you want to print these instructions for yourself, you can go to help & Support in the Start Menu and type the Startup Repair in the top search box.

  Check back with us and let us know if this solves your problem.

  If you have a Windows Vista installation disc, you need to restart (boot) your computer using the installation disc. If you do not restart your computer from the disk, the option to repair your computer will not appear.

  If you have a Windows Vista installation disc:

  1. Insert the installation disc.

  2. Restart your computer.

     Click the button start , click the arrow next to the button lock , then click on restart.

  3. If you are prompted, press any key to start Windows from the installation disc.

     Note

     • If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer. You may need to change your computer's BIOS settings. For more information, see BIOS: frequently asked questions.

  4. Choose your language settings, and then click Next.

  5. Click on repair your computer.

  6. Select the operating system you want to repair, and then click Next.

  7. In the System Recovery Options menu, click Startup Repair. Startup Repair can invite you to make choices as it tries to solve the problem, and if necessary, it may restart your computer, because it makes the repairs.

  If the Startup Repair tool is an option of recovering preinstalled on your computer:

  1. Remove all floppy disks, CDs and DVDs from your computer and restart your computer.

     Click the button start , click the arrow next to the button lock , then click on restart.

  2. Do one of the following:

     • If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you need to try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.

     • If your computer has more than one operating system, use the arrow keys to select the operating system you want to repair, and then press and hold F8.

  3. In the Advanced Boot Options screen, use the arrow keys to highlight repair your computer and press ENTER. (If repair your computer is not listed as an option, then your computer does not include startup as a preinstalled recovery option repair).

• Select a keyboard layout, and then click Next.

• Select a user name and password, and then click OK.

• In the System Recovery Options menu, click Startup Repair. Startup Repair can invite you to make choices as it tries to solve the problem and, if necessary, it may restart your computer, because it makes the repairs.

Judd
Engineer Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Whenever I connect to my computer I get this message: «assert in LSP...» Failed to initialize the mutex. ERR = 5 "

  original title: everytime I log in I get this message... Assert in LSP... Failed to initialize the mutex. ERR = 5./common/shared_memory_ptr.h:188

  X assert in LSP

  fake

  Failed to initialize the mutex. ERR = 5

  ./Common/shared_memory_ptr.h:188

  Abort retry ignore

  What this means... what should I do to fix this

  If I go to any site... it redirects me to one of the CHOICES... Lost IM really have no computer knowledge

  Hello

  I suggest you to follow these steps and check if that helps:

  Method 1:
  Start the computer in safe mode with network and check if the same problem occurs:
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Method 2:
  Try to perform the clean boot and check if it helps:
  http://support.Microsoft.com/kb/929135

  NOTE: When you are finished troubleshooting, make sure that restore you the computer mode normal startup such as suggested in step 7 of the above article.

  It will be useful.

• Defender of Windows Application failed to initialize x 0 80070006. The handle is not valid.

  When I connect to my pc the "Windows defender Application failed to initialize x 0 80070006. The handle is invalid. "appears.
  And then when I go into my control panel and open Windows Defender is the same thing.
  How can I stop this?
  Thank you

  Hello

  read this information on the Defender:

  ·                         If you use microsoft security essentials avg avira mcafee norton etc they disable the vista version of windows defender by default

  the basics of Microsoft security has its own version of windows defender

  and other anti-virus programs use their own particular type of application to scan for spyware and malware

  It of nothing to worry and is the default action, which is designed for them to do

  If the above does not apply to your machine to read the information on the below link on how to disable the windows defender service in vista or make an autostart to enable

  http://www.groovypost.com/HOWTO/Microsoft/Vista/disable-Windows-Defender-service-in-Windows-Server-2008-or-Vista/

  and here is the method to remove it from startup in vista

  http://www.groovypost.com/HOWTO/Microsoft/Vista/remove-Windows-Defender-from-Vista-system-startup/

  and this is how you would normally activate or disable windows defender in vista from within defenders of own and options tools

  http://www.groovypost.com/HOWTO/Microsoft/Vista/disable-Windows-Defender-for-Microsoft-Vista/

      

  and if you need to change startup programs read this information on the other methods of doing it without using defender

  using msconfig read this tutorial:

  How to use MSCONFIG in Windows Vista

  Here's how to use MSCONFIG in Windows Vista to disable some unnecessary programs that load automatically at startup

  http://netsquirrel.com/Msconfig/msconfig_vista.html

  and also try this FREE program Autoruns:

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services more

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

• Re: Most of the time by Satellite T110 webcam fails to initialize

  It happens most of the time you.
  The webcam of my T110 fails to initialize and a message appears saying that webcam could not initialize, please check the device and restart the program (Web camera application) or the computer!

  Other times, it works, but after a pop up appears on the bar by saying that an unsupported USB device has been detected and could not be installed tasks!

  It is boring! Can someone help me please?

  Thank you.
  Manuel Quinaz

  Hello

  Seems that the software of webcam has stopped working.
  I think that you should first try to reinstall this software.

  First remove the software of the webcam of the system.
  Then clean the system and the registry using CCleaner!
  Reboot the laptop twice and run CCleaner several times to make sure that everything has been properly cleaned.
  Download the software of the webcam from the European driver Toshiba page, and then install it.
  Restart the unit. Launch msconfig (in RUN type msconfig) and go to the Startup tab.
  There, you must deselect landmark from the webcam software. This prevents the automatic start software. Restart the unit.

  Now, if you do want to use the webcam, select all programs-> Toshiba-> webcam software and start it.

• Error in the launch of TES Oblivion. It reads: failed to initialize renderer. NiXAdapterDesc::GetDeviceCaps () failed.

  Here's the thing.

  I had just recently completely reinstall Vista on my Dell Inspiron 1521 because recently there KSoD was (BlacK S Of Death creen). I was told that I also had to reinstall my Drivers and Utilities. I had Windows running after that I reinstalled Vista (finally able to reach the screen connection.) and then tried to install The Elder Scrolls IV: Oblivion, I got some kind of error message during installation and when I clicked okay, it shut out of the whole thing. So, I took my friends advice and jumped into the CD Drivers and Utilities that came with my Dell. I extracted, unpacked and installed all the drivers available on the menu (except those who say such as Verizon, Sprint, T-Mobile on them, I don't think that those who are very important, so I only did those those.). After that I did, so I took another slap at reinstalled Oblivion. This time, he actually completed the installation. I was so excited, I clicked on the logo of oblivion on my desk, and when this menu appeared with classical music (the one that offers you the options game, Options, data files, Technical Support, etc.) I clicked Play and then the black window appears as if its going to work and then just stops and this error message is displayed: failed to initialize renderer. NiXAdapaterDesc::GetDeviceCaps() failed. Then everything closes, I tried several times and got the same results each time.

  The main reason I'm being so complete in this regard is to let you know EXACTLY what I could probably help find the problem. Another thing... I'm absolutely stupid with computers, I tried Googling the error message and I found sites where people have had the same problem but they have started talking about all this driver stuff I didn't understand even remotely. I have NO Internet on my computer, unless there is a way to disconnect a cable from my PC at home and connect it to my laptop so it won't be (could this work? If so which cable I have unplug my pc at home and my laptop? Never tried it before.). So I ask, if anyone out there who is willing to help has the answer to my problem, could you tell me how to solve this problem, as if you were talking to a 6 year old? That or just make so that even the dumbest, most computer-illiteriate person could understand. I know almost nothing about all this stuff of pilot. When I reinstalled the drivers on my pc I just follow the instructions step by step that my friend gave me, but had next to no knowledge of what exactly I was doing.

  EDIT: I played oblivion on my PC countless times before KSoD would have on me without any problems at all except that it could be a bit of lag... That's all. It has completely worked until I got the black screen of death on my Dell Inspiron 1521 and had to reinstall vista and all the drivers.

  Hello DJS4400,

  Thank you for using the Microsoft Windows Vista Forums.
   
  GetDeviceCaps() is a DirectX routine call made by the game engine for you check the details of the video card, what it is capable of supporting, and after that the game engine make certain decisions about what all the things to initialize for her. If that is a failure, it means that the game engine is not able to read your video card correctly.
  Most likely, this would be a problem with the drivers and of course, could be a problem with the card itself.

  Try running another game and see if it works. If it isn't, definity your drivers need a second look. If it does, this means, oblivion has a problem with the drivers you are using, or else they have not been installed correctly.

  I would first try:

  Click Start-> then type ' Device Manager "in the field of research-> game controller, select device-> next Manager, select sound and video-> This will drop your card-> with the right button on the map and you should have an option to update the drivers."  Once you repeat this test.

  If still no luck, right click again on the map and select Uninstall (you may have to restart after that) and then return to the driver and reinstall.   In most cases if you need to reboot, when your computer starts it will try updating the driver automatically from the site.

  Please let us know status.  Thank you!
  Engineer James Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Halo 2 "failed to initialize."

  When I run Halo 2, I get this:

  LIVE gaming on Windows failed to initialize. Maybe it's because an another LIVE Gaming on Windows application (for example the dedicated server Halo 2) is running on the same computer. Otherwise, reinstall the game may fix this problem.

  My system:

  Windows 7 Home Premium
  HP g60 laptop
  Pentium Dual-Core processor T4400 2.20 GHz
  4.00 GB
  64-bit operating system

  I see a lot of ideas but WITHOUT DIFFICULTY. I did the:

  net stop cryptsvc

  Rename: c: / windows/system32/catroot2
  to: cr2old

  net start cryptsvc

  And it works not ONCE! Then every time you have to re do it. All the PATCHES?

  Thank you and Merry Christmas

  Hi all

  I fixed it. http://support.Microsoft.com/kb/976264 ALIAS:

  Update of application compatibility for Windows Vista, Windows Server 2008, Windows 7 and Windows Server 2008 R2: February 2010

  Note: will NOT work if you DOWNLOAD it! I tried a week ago. When I run it, it says: "search for updates". or something like that and then said: this will not work on this operating system. (Whatever).

  If you RUN it from the window of download, it will run sucssesfully Be aware that it will not tell you he had run, he won't tell you anything. I restarted my computer and then ran Halo 2 and it worked thought that it took a little longer for Halo 2 to go. Given that I always do not trust in it, I have completely closed and restarted. It still works.

• Error: Dreams 3D failed to initialize.

  Keep this error message, error of scrip, dreams 3D module failed to initialize.  Tells me to contact Support @3ddreams.com, however, comes back can not deliver.  This happened after I downloaded the music.

  Is what type of application or the game? Are you talking about the screen saver?

  What OS you are using. If you are talking about the screen saver, it seems that the app was 95 - XP, so if you use Vista or Win 7 you can try compatibility mode.

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

  MCP. MCDST. LVL 80