Failed to retrieve USB

Similar Questions

• Failed to retrieve quotes and news from investor to my 99 Silver plan

  Failed to retrieve quotes and news from investor in my 99 Silver plan

  Hello

  Could be a temporary problem.

  Check in the Microsoft Money Forum.

  Microsoft Money - Forum
  http://social.Microsoft.com/forums/en/money/threads

  Microsoft Money Solution Center - suggests alternatives
  http://support.Microsoft.com/mny

  What is Microsoft Money Plus sunset
  http://support.Microsoft.com/kb/2118008

  BING - microsoft money replacement
  http://www.bing.com/search?q=Microsoft+Money+replacement&go=&QS=n&SK=&SC=7-27&form=QBLH

  Google - microsoft money replacement
  http://www.google.com/#sclient=psy-ab&hl=en&source=hp&q=microsoft+money+replacement&pbx=1&oq=microsoft+money+replacement&aq=f&aqi=g4&aql=&gs_sm=e&gs_upl=9978l11972l2l12926l12l1l0l0l0l0l467l467l4-1l1l0&bav=on.2,or.r_gc.r_pw.,cf.osb&fp=dcc84c4c7dd2e143&biw=1024&bih=681

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Failed to retrieve the kernel symbols.

  Hello

  I was wondering if anyone else has had it before. For some unknown reason, my VM Win7x64 which I use very good for 2 or 3 years has stopped working. When I try to run it, it comes up with the following error messages; I have to click OK to go to the next message. I uninstalled VMWare and I have restored the virtual machine to start a VM work last week. None of them worked and now I need help.

  Failed to retrieve the kernel symbols.

  Could not initialize the surveillance apparatus.

  Internal error.

  VMWare Pro - 6.0.1 (1331545O

  Help, please

  Hi farbeyond,.

  Please see the post of karthikg2013 here: Re: my Virtual Machine unbootable molten

  See you soon,.

  --

  Darius

• Failed to retrieve the configuration of database file when installing EBS on 2 nodes

  I try to install EBS 12.1.1 on two different nodes on Redhat Linux 5. After properly installing the database on node1 (ebsdb), I started rapidwiz on node2 (ebsapps) to install the application technology. When I get to the screen where it asks "Do you want to create a new configuration or load a saved?", I chose to load a saved configuration, typied in the database connection information (ebsdb.sparkdb.com:PROD:1521) and get the following error. Anyone know what I am doing wrong? I am able to ssh to ebsdb to ebsapps and vice versa, and the database and listener is in place.
  
  Failed to retrieve the database configuration file.

  user564785 wrote:
  What file must be copied from DB node to the node of Apps and what place?

  conf_.txt - http://docs.oracle.com/cd/E18727_01/doc.121/e12842/T422699g54568.htm

  You can copy the file to any place on the application-level nodes.

  Thank you
  Hussein

• Failed to retrieve this file?

  Hello

  I have written some documents in InDesign CS4 over the weekend and exported inx file to work on it to work using CS3. Something I do quite often.

  When I opened and save it as a new document in CS3 and trying to change my text, I get an error message that says:

  "Failed to retrieve this file. It can be used by someone else. "

  It's crazy, because it it only my folder and is not on any network etc... etc... etc...

  We know what could cause this and how I can close it, so I can work on my file?

  Thank you!

  Babs

  Are you sure that you didn't export an .incx file or resources (history of InCopy CS3) by chance?

  Bob

• Failed to retrieve the mappings for the server. Reason: null

  I get the following in the Console error when I add or update my server

  [oolocal], (07 / 14 at 04:40:11): server is available. Get the settings from the server to the server
  [oolocal], error, 07 / 14 at 04:40:12, impossible to fetch Server mappings. Reason: null
  [oolocal], error, 07 / 14 at 04:40:12, failed to get the logs directory. Reason: null

  Standalone CF8

  Webroot in c:\inetpub

  RDS works (so I can browse the datasource)

  Kind regards

  Aaron

  This problem is known. Failed to retrieve the mappings for the server. Reason: null. We fix it.

  Just to check the parameters are collected successfully from the server. Create the project and join the server to the same. CFM open and type must identify the data sources.

• UCM - BPEL failed to retrieve the form of update process. Cannot run the service

  Hello
  
  
  I am trying to integrate the University Complutense of MADRID 10.1.3.3.3 with BPEL 10.1.3.5, I already installed the component of the UCM BPEL and updated the jar files in/custom/BpelIntegration/lib with the pot in BPEL.
  
  Also define the connection between UCM and BPEL
  
  the Configuration ID: Local
  Description: Local BPEL
  Domain: by default
  
  JNDI properties
  First factory of context: oracle.j2ee.rmi.RMIInitialContextFactory
  The provider URL: opmn:ormi://localhost:6105:oc4j_soa / orabpel
  Principal: oc4jadmin
  Identification of security information: *.
  
  When I test the connection it seems to be valid "JNDI parameters were validated successfully."
  
  but when I try to create a process with bpel configuration, the following ERROR Message appears:
  
  Content Server request failed
  Failed to retrieve the form of update process. Unable to run the 'getDeployedProcesses' of service method. (System error: runtime error: java.lang.IllegalStateException: can't replace cause)
  at java.lang.Throwable.initCause(Throwable.java:320)
  to bpelintegration. OracleIntegration.getAllProcesses (OracleIntegration.java:265)
  to bpelintegration. OracleIntegration.getBpelProcesses (OracleIntegration.java:184)
  to bpelintegration. OraBpelHandler.getDeployedProcesses (OraBpelHandler.java:224)
  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
  at java.lang.reflect.Method.invoke(Method.java:585)
  at intradoc.common.IdcMethodHolder.invokeMethod(ClassHelperUtils.java:461)
  at intradoc.common.ClassHelperUtils.executeMethodReportStatus(ClassHelperUtils.java:142)
  at intradoc.server.ServiceHandler.executeAction(ServiceHandler.java:75)
  at intradoc.server.Service.doCodeEx(Service.java:488)
  at intradoc.server.Service.doCode(Service.java:470)
  at intradoc.server.ServiceRequestImplementor.doAction(ServiceRequestImplementor.java:1350)
  at intradoc.server.Service.doAction(Service.java:450)
  at intradoc.server.ServiceRequestImplementor.doActions(ServiceRequestImplementor.java:1191)
  at intradoc.server.Service.doActions(Service.java:445)
  at intradoc.server.ServiceRequestImplementor.executeActions(ServiceRequestImplementor.java:1111)
  at intradoc.server.Service.executeActions(Service.java:431)
  at intradoc.server.ServiceRequestImplementor.doRequest(ServiceRequestImplementor.java:632)
  at intradoc.server.Service.doRequest(Service.java:1709)
  at intradoc.server.ServiceManager.processCommand(ServiceManager.java:357)
  at intradoc.server.IdcServerThread.run (IdcServerThread.java:195))
  + [Details] +.
  + Battery service for this request is - ORABPEL_PROCESS_UPDATE_FORM (* no captured values *) java.lang.IllegalStateException: can't replace cause to java.lang.Throwable.initCause(Throwable.java:320) to bpelintegration. OracleIntegration.getAllProcesses (OracleIntegration.java:265) to bpelintegration. OracleIntegration.getBpelProcesses (OracleIntegration.java:184) to bpelintegration. (OraBpelHandler.getDeployedProcesses(OraBpelHandler.java:224) at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:585) at intradoc.common.IdcMethodHolder.invokeMethod(ClassHelperUtils.java:461) at intradoc.common.ClassHelperUtils.executeMethodReportStatus(ClassHelperUtils.java:142) at intradoc.server.ServiceHandler.executeAction(ServiceHandler.java:75) at intradoc.server.Service.doCodeEx(Service.java:488) at intradoc.server.Service.doCode(Service.java:470) at intradoc.server.ServiceRequestImplementor.doAction(ServiceRequestImplementor.java:1350) at intradoc.server.Service.doAction) Service.java:450) to intradoc.server.ServiceRequestImplementor.doActions(ServiceRequestImplementor.java:1191) to intradoc.server.Service.doActions(Service.java:445) to intradoc.server.ServiceRequestImplementor.executeActions(ServiceRequestImplementor.java:1111) to intradoc.server.Service.executeActions(Service.java:431) to intradoc.server.ServiceRequestImplementor.doRequest(ServiceRequestImplementor.java:632) to intradoc.server.Service.doRequest(Service.java:1709) to intradoc.server.ServiceManager.processCommand(ServiceManager.java:357) to intradoc.server.IdcServerThread.run(IdcServerThread.java:195) +.
  
  
  
  Can someone help me?
  
  Thanks in advance
  
  Carlos Pereira

  Hello

  Workaround for this problem is:

  Copy orabpel - thirdparty.jar/bpel/lib and place it in the folder/custom/BpelIntegration/lib , and add this variable in intradoc.cfg of the CS (stop the content server before performing this change):

  JAVA_CLASSPATH_bpel =/custom/BpelIntegration/lib/orabpel-thirdparty.jar

  Start content server after the steps above have been completed, and then test to see if the problem persists.

  Thank you
  Srinath

• Error running code system. Failed to retrieve the configuration information

  I get this error:
  
  Error running code system. Failed to retrieve the configuration information for the content Terminal item. Unable to load locale 'American English '.
  
  Details:
  
  An error has occurred. The stack trace below shows more information.
  
  ! csSystemCodeExecutionError! csUnableToGetConfigInfoForCheckIn! csLocaleNotFound, English-US
  intradoc.common.ServiceException:! csUnableToGetConfigInfoForCheckIn! csLocaleNotFound, English-US
  at intradoc.server.ServiceRequestImplementor.buildServiceException(ServiceRequestImplementor.java:1760)
  at intradoc.server.Service.buildServiceException(Service.java:1997)
  at intradoc.server.Service.createServiceExceptionEx(Service.java:1991)
  at intradoc.server.Service.createServiceException(Service.java:1986)
  at intradoc.server.ServiceHttpImplementor.determineParameterizedLocale(ServiceHttpImplementor.java:609)
  at intradoc.server.ServiceHttpImplementor.initLocale(ServiceHttpImplementor.java:408)
  at intradoc.server.Service.initLocale(Service.java:333)
  at intradoc.server.Service.initDelegatedObjects(Service.java:201)
  at intradoc.server.ServiceManager.processCommand(ServiceManager.java:358)
  at intradoc.server.IdcServerThread.run(IdcServerThread.java:197)
  
  Anebody has an idea
  
  
  Thank you
  REDA

  Hello

  Add the SystemLocale = American English variable in your config.cfg, restarting the CS and then see if the same problem persists.

  Srinath

• Failed to retrieve Counter measures series M USB input

  I have an application where I need to measure any number of semi-periodes using a counter stain in the input on a USB M Series buffer (6221).  As the number of pulses is undetermined, I did the ongoing task (but a finished task with a buffer larger than the number of times my semi gives the same behavior).  I start the task of counter entry and then trigger an external pulse generator.  I'm getting a signal saying the external pulse generator is finished, and at this point, I know I can read back all the acquired samples.

  I waited for that (for a small number of impulses) reading-1 simply give an empty array that my samples would have sat on a USB and DAQmx hardware FIFO would have no way to know about them (indeed, it is true).  However, it turns out that to read a finite number of samples not initiates transfer and instead results in a time-out (even with the time set to the default value of 10 seconds).  It seems that after DAQmx Read is called an additional impetus is needed to start the transfer of the buffer to the software (as if there was some kind of pipeline).  However, for this application to work I need to read after the last pulse was generated so I can measure all impulses.  Generate additional impetus after reading allows me to read my full buffer, but I can't afford to send an additional impetus (that would trigger my polymerization of power system pulsed) just to re-read my data.

  Here's a simple reproduction VI:

  

  I should also mention that the behavior is correct in USB x 621 (and so probably the X series as well).  In other words, reading a finite number of samples is initiating the transfer (no additional impetus is needed) so I can read 1 sample followed by-1 to get all my data.  Internal bus (PCI, PXI, PCIe, SMU) do not have the USB FIFO and so I'm not expecting to show the behavior either.  Reproduce, you would need to run it on a key USB 622 x 625 x or x 628.

  If I make the finished task and provide the correct number of pulses it works (I can just read back the desired number of only one), but as I don't know how many pulses are generated to do the continuous task or end up with many more - in both cases, it seems impossible to get all of my data back.

  Does anyone have a way to initiate the transfer of a task (not bus-powered) USB M Series semi period once the source of the signal ceased to produce pulses?  Hardware change (or alternatives such as the DI a timestamp change the task of detection) is not an option for me as we have several systems deployed to customers already and this input is wired for a PFI to a USB 6221 OEM line.  The Size property of ask Xfer USB does not seem to be supported on USB M Series for half tasks.  I also tried to interview samples available by channel (thinking maybe this could initiate a transfer) but it made no difference.

  Best regards

  Hello again John!  Of course, push you our products on the cutting edge!

  Unfortunately, in this case, this is the expected behavior.  Signals Streaming technology of NOR allows we to the bus package based such as USB, Ethernet and wireless applications to high bandwidth everywhere.  Unfortunately, our first generation data acquisition products to use signals Streaming technology of OR were based on the ASIC STC2 which was not designed originally with Streaming of signals OR to mind.  Counters, in particular, are a special cirumstance where it's particularly weird.  When you call DAQmx Read, we usually indicate to the device to send through all the necessary data that you request instead of create a maximum of size package for the best use of USB bandwidth.  In the meter case, however, actually required the aircraft to send a sample of more than what you actually want.  The reason for this is that we must manually check for error on the subsystem of meter conditions until we send you all data which may not be valid.  Because of this, we inject an additional step in the chain of events before that data is sent across the bus to ensure that, in fact, the data we send is valid.  This requires us to acquire a sample of data that we expect to kick indicating error conditions that could occur from the subsystem.

  As you have noticed, this is should be a question on the USB M Series devices for.  Powered by bus of devices USB M Series (USB-621 x), X series (USB-63xx) and all the features of the plugin should not have this problem.

• FAILED TO RETRIEVE HP 2000

  Hi all

  First of all, let me apologize for the long post.  I am currently working on a laptop of a friend (2000 HP).  He is locked up while he was browsing the SD card in the card reader.  I'm not entirely sure of what he was doing, but he has finally it turned off.  When it has restarted, he tried to fix it himself.  It worked for about 4 hours (he says), so he switched off again.  I picked up the next day and let it run and run.  I quit the job when it is still running on my desktop, and when I got home the next morning, it was powered off.  I assumed it was over, but when I restarted it, it could not do something (for 2 hours).  So, I tried to launch the HP recovery utility, which has failed repeatedly.  I used my laptop Windows 8 to create a recovery USB drive, that is me in the recovery after 4 hours of grinding console (I chose to reset).   I started the process and let it located on my desktop all night.  At one point, didn't reset.  So, I restarted, go to the BIOS once more and disabled startup secure in the hope that he would expedite the process.  I brought the laptop home and restarts the reset process.  After about 4 hours, he got to close to 47% and has not yet.  This time, I just tried to restart to see if she would do anything.  He said that no OS was present and gave a few menu general diagnostics.  I ran the Diagnostics short drive, and the drive failed the test of the DST.  So, I am now assuming that the drive is dead, and that's what was causing all the problems.  My question is, if he buys a new drive, how can I get a Windows 8 ISO to reload the OS?  I read that the product keys are now stored in the BIOS.  Is this true?  If so, is it can I can legally download an ISO file so I can fix it laptop guy.  Here's another better, he bought a year earlier in the week where he has failed, but only took it out of the box a few months ago.  Again, I apologize for the short novel.  I don't know much Winows 8, so if someone could help me somehow, I'd greatly appreciate it.

  Thank you

  -Rob

  The license key of Windows 8 is indeed integrated into the BIOS. You can use retail DVD, ISO fle, etc. to install and activate it. You can also order recovery disc from HP for usually less than $20. They will restore the laptop to the factory, with all the drivers/software.

  Contact HP worldwide information are available here >Contact HP

  ISO here 8 Windows 64-bit

• Failed to retrieve the files saved on an external HD for a restoration of Windows Vista

  My HP laptop was more able to launch Windows Vista. Fortunately, I had a recovery disk for the laptop that was created when I turned first on the laptop several years ago. When I was running the recovery disc, asked me if I wanted to save all the files before the computer was placed back in its original factory condition. I said 'yes' and asked to plug a USB key. I plugged my WD "My Passport" external hard drive with 1 TB of memory. It took more than 12 hours to copy everything (especially photos) on the external drive, then my laptop has been restored. Now my laptop works fine but I cannot access files that have been copied to the external HD Windows says there are 100 GB used on the external hard drive, but none of my files are visible in Windows Explorer. I tried the advanced restore from the backup and Restore Center, but this program does not detect as anything on the external hard drive. How can I get my old files back below the sending of my external hard drive to a data recovery company and pay several hundred dollars? Help, please.

  You perform the operation mentioned such backup in the backup when retrieving files section in the following link:

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00814731&LC=en&cc=us&DLC=en

  If that's what you were doing, you need to set up your question in the support of HP that this program was designed and implemented by HP for their computers. Here is a link to the HP's Support Forums:

  http://h30434.www3.HP.com/

  Hope that helps!

• Failed to retrieve P2119PC Pavilion

  Recently, my computer became infected and since I have almost nothing of value on the computer I decided just for full recovery rather than go through a long attempt to fix.  However, using the options recovery factory fails (F11 at startup) with the message "Recovery manager cannot restore your computer by using the original image.  Contact HP support.  0xe0ef0003 error code.  Now, of course, the computer does not even start in safe mode.

  I ran the diagnostics of plant material, I did a full chkdsk/r on both partitions and I ran a complete hardware test suite and everything goes.  I don't have the recovery disks.  I really don't want to spend several hours on the phone with technical support of the India, do I have other options?  The factory restore disk make a difference?

  Thanks for any help.

  Hello:

  If you can read 25 character Microsoft Windows 7 product key and can live with the simple operating system and the software/drivers found on your PC support page, you can do a simple installation of W7 media by reading the info below.

  Use the installation of Windows 7 USB/DVD tool to compile the ISO file that you download from Digital River. The link below. You need a DVD or a 4 GB flash drive using the USB compilation method.

  Use the product key of windows 7 of 25 characters to activate your installation.

  http://download.CNET.com/Windows-7-USB-DVD-download-tool/3000-18513_4-10972600.html

  Then go to the support of the PC and driver page to install the drivers you need.

  Link to downloads ISO of W7 is below. Download the Windows 7 version that is on your product (Home Premium, professional or ultimate) key to apply.

  http://forums.mydigitallife.info/threads/14709-Windows-7-Digital-River-direct-links-multiple-languag...

• Failed to retrieve the system on a new hard drive

  Hi all

  I've owned a large Pavilion s5325UK that the last few months, threw up Smart new warnings on the disk may fail.

  Yesterday, I bit the bullet and paid for a new HDD to be brilliant.

  Copied all my user data etc. to offshore on an external drive OK.

  I got the system once before after a kidnapping missed an infection by the virus.

  Installed the new drive is a Seagate Barracuda 500 GB SATA 600 7200 RPM 16 MB 3.5 "

  The party went well past and that seems to be made of conservation treatment unit to restart.

  Windows cannot be installed on this material,

  Then it's a series loop of reboots everything ending in the same error.

  The old drive is a Western Digital Caviar Blue of the same size.

  The problem with the new hard drive.  I dropped on a XP Pro image and mounted the drive to an old pc from redundant and it starts very well even if I do not mind that install drivers etc chip that was only to check the disc.

  I'm a bit confused now as I have now tried the recovery process 3 right now with the same error at the end of each attempt.

  Any suggestions are most welcome, thank you

  Hello:

  Make your own Windows 7 If installation media you can read all 25 characters of the product key of MS Windows 7.

  Here's how:

  If you can read the Microsoft windows 7 25-character product key, you can download simple Windows 7 ISO files to burn on a DVD for the version of windows that is installed on your PC, and which is listed on the Microsoft COA sticker on your PC case.

  Burn the ISO with the option to burn the ISO on your DVD burning program and burn it at the slowest possible speed that will allow your program. This will create a bootable DVD.

  Or use the installation of Windows 7 USB/DVD tool to compile the ISO file that you download from Digital River. Link and instructions below. You need a 4 GB flash drive to use the USB compilation method.

  http://www.microsoftstore.com/store/msstore/HTML/pbPage.Help_Win7_usbdvd_dwnTool

  Use 25 characters on the PC product key to activate the installation.

  The key will activate a 32 or 64 bit installation.

  Then go to the support of the PC and driver page to install the drivers you need.

  Link to downloads ISO of W7 is below.

  http://www.mydigitallife.info/official-Windows-7-SP1-ISO-from-Digital-River/

  Paul

• Failed to retrieve Windows Photo upward

  I backed up my HDD to an external hard drive Western Digital when my computer informed me that my hard drive was about to fail.   Then I restored my files to the new HD.  The problem is that my pictures have not been restored - the files are there, but they are empty.    I used Adobe Photoshop 2 to process the photos originally, but I don't have a copy saved this old application to replace on my new HD.    In my opinion, this is why I can't get the photos.  Can someone tell me how to restore the photos without the old software or tell me where I could find the old software for Photoshop 2?  I installed Photoshop 3, but I had never used it before, so it did not help.

  I used Windows to the top. I went through all suggestions from windows support to retrieve files from the back to the top, but all I get is the empty file folder.

  Hi AndreeMiller,

  Are you facing the issue only with folders with pictures?

  You can try the following steps and check if it helps:

  a. right click on the folder and select Properties.

  b. check the size of the folder.

  If this isn't displays 0 bytes, then the folder is hidden.

  You can see the corresponding article to activate the hidden folder:

  Show hidden files

  You can check with the help of Adobe concerning Photoshop 2 download:

  Adobe support

• Unable to connect to the server with ttisqlcs, failed to retrieve IP address of the system

  Please help me, I have installed timesten server and client on different machines in the LAN, but with the same user and group - ttadmin:ttgroup

  When I tried to connect to the server with ttisqlcs - connStr "DSN = sampleCS"

  The result gave me errors like below

  Connect "DSN is sampleCS ';.

  S1000: Unable to retrieve the IP address of the system. System error:-2

  The command failed.

  Fact.

  The related part in sys.ttconnect.ini is defined as below

  [192.168.0.206]

  Description = TimesTen Server

  Adresse_reseau = 192.168.0.206

  PORT_TCP = 53397

  And the sys.odbc.ini

  [ODBC data sources]

  sampleCS = TimesTen 11.2.2 Client Driver

  [sampleCS]

  TTC_SERVER = 192.168.0.206

  TTC_SERVER_DSN = nredb_ds

  That wants it mean by 'recovering intellectual '?

  He is trying to resolve IP by hostname even when I already gave him the ip address?

  Either way, I can ping 192.168.0.206 and telnet to port 53397 without problem.

  Please help me, thanks ~

  It does not matter that they are VMs (I use between virtual machines all the time), but "Networking" of VM, of course, must be set up correctly. But if you can ping and telnet between VMS so that shouldn't be a problem.

  On the client computer, you have an entry in/etc/hosts for the client machines and the server? Even on the server? Please check that and add entries if they are not there and see if it helps. If not then we need to find the client using 'strace' to see which system call fails. Please try and after the release (or at least the last part that leads to failure).

  Thank you

  Chris