Failed to start the laptop - screen remains black

Similar Questions

• Blue Screen stop Codes, failed to start the laptop at all the

  I have an Inspiron running XP Media Center edition.  Something strange happened last night where the power was interrupted during the closing down and the laptop has become something weird Media Center Genuine Advantage. I don't know what it was, I was half asleep at the time.

  In any case, this morning, I can't start the laptop.  It brings me to a screen where I have the option of waiting for Windows to start, start Windows normally or start in safe mode.  None of these work.  They bring me straight to a blue screen with stop code: 0 x 00000024.  Then, in parentheses, there these: 0 x 00190203, Ox8651F288, 0xC000102, 0 x 000000000.

  I searched a bit, and seems the only solution that I found the recovery utility, but I have a few questions about it.  One, I lose my data? Two, it says it's for advanced users, and I'm not an advanced user.  I'll be able to use it?  Three, you need a CD of the OS to run it, and I don't have a CD when I bought my Dell laptop.  I don't think I even offered to pay extra to get a copy (it was awhile I bought it).  Can I get a CD of the OS through Dell?  I know that you can burn a backup copy of Windows, but I only learned after the beginning of this problem.

  Any other maybe solutions?  Thank you.

  Message edited by kazoos at 14/10/2008 12:22
  Message edited by kazoos at 2008-10-14 12:23
  
  

• Satellite A210 - 1 4 - failed to start the laptop computer just orange light

  OK, so this is what happened:

  While my friend was working on his laptop computer that she had his charger plugged but it did not load. I discovered that the lead from the Charger AC/DC had frayed and should resolidering. After that the laptop was working fine, I looked inside the laptop to check the AC plug connector before I fixed the cable.

  I noticed that the WiFi card was broke, so I changed it to a WiFi card in my other laptop used. After back the laptop together and put the battery in, the lights on the front flash blue only and the power light stays orange as if the laptop is in stand-by mode. I can hear the hard drive turns and the CPU heats more CD-ROM drive works, but I can't start that the laptop just sits there with the Orange.

  I tried out the CMOS battery, I took out the main battery and just used the AC/DC adapter, but the same thing happens.

  ANY IDEAS?

  Hello!

  I'm not sure, but what happens if you remove the WiFi card you created in? The new card is may be defective or not compatible with the laptop.
  You can start without WiFi card?

  To me, it looks like a hardware problem and your laptop should be checked by a technician of the laptop. Maybe the motherboard needs to be replaced or something else

  Good bye

• Alienware x 51 starts, but the screen remains black.

  I bought my x 51 all with warranty 1 year ago a year and a half, recently it has been giving me some problems and today I can't use it yet at all.

  The problem started with my screen remains black when I turned on my computer (punt, never awake from sleep), but which would be corrected by me once or twice by restarting the computer. That did not last too long, and soon it did not matter how many times I rebooted the computer. I finally had to unplug the computer and press and hold the power for 30 seconds to see if it worked.

  He did, but this solution has worked only once, and now I have nothing seems to regularize my situation. I tried switching monitors and cables with my brother (who is an identical 51 x), but nothing has worked.

  To summarize:

  My computer turns on.

  Not funny lights or noises (save a beep on startup)

  Screen remains black on reboot of the screen it says he receives no signal and falls asleep.

  No problem when it runs normally (not funny colors, stripes on the screen or blur).

  Help, please. Dell support wants 70 to 110 dollars to listen to even my problem, which is money, that I don't have at the moment.

  Thanks for anything that might help!

  Sounds like you have a dead video card, from the link above looks like there is no output from vga Intel to tun tests, you must remove the old video card and test with another video card that works to verify that the card is in fact dead, like your brothers x 51 remove the video card and test it on your machine.

  If I had this machine in front of me I would use one of these babies for once then run tests on the video card.

  HDMI to DVI

• Satellite A300D is runnig but the screen remains black

  Hello!

  I have a big problem with my Satellite A300D.

  This morning I forgot to connect my laptop to the net elec, and so my battery drains.
  When I reconnected and restarted my laptop I could see the Toshiba and splash screens of Windows, but after these the laptop screen becomes black.

  You can see the cursor, but the rest disappeared.
  The screen is all black.

  Strangely, when I press ctrl + alt + delete, the vista opens again, and I can select and view the Task Manager.

  What should I do!

  Hello

  There is a solution that could help bring back the screen.
  in Notepad, remove the battery and unplug the AC adapter.
  Wait about 30 minutes and reconnect the two parts.
  Then try again to put the laptop.

  In many cases, this procedure helped to set something like this.

  Good luck

• When using gpu high performance my laptop screen goes black and white

  HP Touchsmart TM2-1010ea

  Windows 7 64 bit

  recently updated to AVG, nothing of other news.

  When I use the high-performance GPU the laptop screen going black and white, still functional. When you use two screens, the second screen is in color, while the laptop is in black and white. using the screen of the laptop power saving GPU is again in color.

  Hello mcbethtings:

  Welcome to Hp forum. Your question is not in the list. http://h10025.www1.HP.com/ewfrf/wc/documentSubCategory?tmp_rule=56801&tmp_task=solveCategory&CC=UK&DLC=en&lang=en&LC=en&product=4100044 So, in this case I sujest a restore back to remove what are the mistakes caused by a bad AVG update. GoTo all programs search and type in Recovery Manager click that above and open it. Click Yes (white box) so it apears. Select Microsoft System Restore Click next to three windows now you will see a list of dates, select a date prior to the installation of the update, then click. Let the computer do its restoration. Once done see if your problem is solved, if so try the update again, make you that the update is for 64-bit Windows 7 computers before you download it again. If that happens again once you know what AVG is not compatible for your computer.

  Probably you have only received part of the witch update caused this problem due to the disruption of atmospheres. Sometimes this happens. Put day of my HP only made once. I just did a restore back and downloaded the update again and the second time through work. Please click on Bravo if this solves your problem. Thank you frrw.

• When I start my Satellite A300 the screen remains black

  When I turn on my Satellite A300, the screen remains black and doesn't change at all... Any help please?

  What is password problem in your other thread? Already solved or what?
  If the problem persists, I don't see any sense to start this thread because people don't understand what the problem is.

  Please do not mix two questions and explain exactly what you see on the screen after turning on your laptop.

• My screen goes black after a short so that after starting my laptop. I plugged an additional screen now to be able to use my laptop, but the laptop screen keeps turning black shortly after. How can I fix it?

  My screen goes black after a short so that after starting my laptop. I plugged an additional screen now to be able to use my laptop, but the laptop screen keeps turning black shortly after. How can I fix it?

  Hello

  I'm sorry to say this, but it points to a UPS of material about to fail.

  You will need to bring the laptop to get it replaced.

  Slan go foill, Paul

• Satellite A200 screen remains black when you try to start

  Hi all

  My Toshiba Satellite A200 laptop computer no longer works, then everything started when I was playing a game, all of a sudden the screen turned blue with a tiny text written on it. I had to hold the power button for a few seconds to close, because nothing not happening on the computer. Then, I pressed the power button to open it. Everything was fine, until the Welcome screen. In this part, he wrote 'Welcome' but Vista left loading circle of it was not turning.

  After a few seconds, I decided to shut down the computer once again, so I hold the power button for the computer firm. Here's the problem: I tried to re-open it, but the screen remained black. Nothing was happening. The power light is blue, but not all computer activity. So I left it like that a few minutes then it closed and tried again, but it's the same thing. I tried to take it apart and noticed the card two memory was not entirely in its niche. I fixed it, but it does not solve the problem.

  I also tried to plug another screen on it, but this one was also black. So I handed the screen on his computer and tried to boot my laptop and it worked. He was the starter, but the first problem came, the Welcome screen was frooze it. So yes I close it up and then it's the same thing, the screen remained black.

  I don't think the problem is the screen, because as I said some time it goes to the Welcome screen. Also, I hear no welcome sound when the screen remains black as if the computer would simply not starts. And as I said earlier, I see no activity of the computer on the little light in front of the computer. And to the left of it, I see clearly that the computer is ON, because the power light is blue.

  That is my problem, the next time that the computer is able to start I'll try to boot mode SAFE, but until then, I don't know what to do. Please, help me.

  Thanks in advance,
  MrRoy

  EDIT:
  After the computer is turned off for about 30 minutes, I started and booted in safe mode. At this stage, I have locked my computer with the close button instead on the power button. Then I opened my computer and he started and the problem was solved. Now my laptop is open and working.

  So, if this happens to you:
  1. turn off your computer.
  2. wait about 30 minutes.
  3. start in safe mode
  4. close using istead of now off button power button closure.

  It should work.

  Finally, it does not work. I don't know why, but my computer did start after 30 minutes, but now it no longer works. Only, it will not start as I said later, with a black screen.

  The computer worked for about half an hour. I mean, I managed to start but after running a program, it just froze and I had to hold the power button to restart. I made about 3 or 4 times, and then he was simply the black screen again. I think the problem is my processor, maybe that it is damaged or something, would it possible?

  Because I see that the processor does not work when I try start it.

  So let's say that this is the case, would it be the symptoms of my computer?
  And if it's the processor, the only way to resolve this is to send it to a repairman or something, because I don't feel like it, I'd rather do it myself.

  But now, my computer is simply not starting, as I said in my previous post.

  Thanks in advance,
  MrRoy

  -----

  Note: The Edit button was not there so I had to double post :/

• Windows vista screen remain black but the power and the fan runs

  I have a laptop of 5 years that I use for school. Normally, I have my laptop on the way 'sleep' but one day, that the display lights «» I press the power button to restart and it stops, however, when I turn it on, it will only show power and the fan runs. The screen remains black. Can someone help me, I need to access my documents from the school.

  Thank you
  c

  Hello

  Video card problems are the most common cause of this problem.

  Method 1:
  Reinstall your video driver a. right click on the taskbar and then click Start Task Manager.
  b. click on the processes tab, click explorer.exe and then click on end process.
  c. click file and then click New task (run).
  (d) in the text box to open, type explorer.exe, and then click OK.
  e. click the Start button, type device manager in the start search box, and then, in the search results.
  Click on Device Manager.
  f. double click on display adapters, right click the display device, click Update driver software and then follow the steps in the wizard that appears.

  Method 2:

  Start the computer in safe mode and run system restore

  a. click the Start button, click the arrow next to Shut Down and then click on restart.
  b. do one of the following:

  • If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.
  • If your computer has more than one operating system, use the arrow keys to select the operating system you want to start in safe mode, and then press F8.

  c. on the Advanced Boot Options screen, use the arrow keys to select Safe mode, and then press ENTER.
  d. connect to your computer with an account of a user who has administrator rights. When your computer is in safe mode, you will see marked Safe Mode in the corners of your screen.
  e. click the Start button, type "System Restore" in the search box, click System Restore, and then click Next.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  f. choose a restore point when your PC worked as expected, click Next and then click Finish.
  g. restart your computer normally.

  Keep us updated on the status of the issue.

• The license is delivered, the screen remains black.

  I have a compiled the sample player, have a 'work' license server, package seems to work as well, but the garbled game content does not.

  1. If you use the policy made by CreatePolicyWithOutputProtection, I get "NoDigitalProtectionAvail" as error message in the client, tomcat said:

  a. 2010-08-16 15:24:36.0300 INFO http-8080-1 com.adobe.flashaccess.refimpl.web.RefImplLicenseReqHandler.REQUESTS. {Answer: license Id: politique-{30BA0F80-F885-3CBF-8546-1AB339E81834} Id: {44FAE9D2-3170-3797-B290-93665F8C398F} Id of root license: {null} license Start Date: End Date of license {null}: {null} license caching End Date: {null} License Type: {sheet}

  
  

  
  

  2. If using a policy normal with authentication, stays black player, returns the following and the server up a PolicyEvaluationException: (error Code: 306): required authentication.  fails at the: licenseReq.generateLicense (desiredLicenseType); where the type is sheet.
  

  
  

  
  

  3. an another strange is that the referents of the documentation to the tenant-installation configuration, while demand seems to still use the outdated flashaccess - refimpl.properties

  Thank you

  Maarten

  Hi Martin,

  1. If you use a policy that contains the output of protection, please ensure that you use a Windows Vista or higher operating system.  The OSX and Linux OS currently do not expose mechanisms to activate the output Protection, this packaged content with that restriction will fail to play on these operating systems to an external monitor.  If you use a Windows machine, make sure that the external monitor that you are using is HDCP, and your cable is also consistent.  Another test, that you can run to check the operation of output Protection is to use a laptop computer (or any other device with an internal screen) to read the content.  The laptop screen is not considered to be an 'external', Content Protection output on has yet to play.

  2. If you use a strategy with authentication enabled, your video player must first authenticate with the license server before purchasing a license.  You have not authenticated yet, which is why you see your mistake.  Authentication can be done via the DRMManager.authenticate () method.  You can find an example of coding by referring to the "Sample video players" directory on your DVD Flash (or access your electronic copy, if you purchased Flash Access via ESD).  Of particular interest is the file "TestVideoControl_WI.mxml" - take a look at the method 'loadVoucherFR()' for the sample code.

  3. There are 2 servers implementations provided with Flash Access.

  a. flash Access Server for protected streaming

  b. flash access Reference Implementation

  Solution 'a' is a servlet that is ready to deploy that has minimum functionality and is oriented toward the use case being protected streaming HTTP.  No source code included.

  'B' is a reference implementation complete with almost all the capabilities of the Flash Access SDK.  The source code is included for the customer to create and deploy their own server.

  * You read the section of the documentation that describes the servlet "Protected streaming", which uses the concept of "tenants".  Article 9 of our documentation (http://help.adobe.com/en_US/flashaccess/2.0/protecting_content.pdf), you will see a section of "license server and watched folder Packer ', which describes the reference implementation (the server you seem to currently use).

  see you soon,

  / Eric.

• MacBook Pro 2015 turns on but the screen remains black...

  Hello

  Today, I tried to turn on my MacBook Pro, but my screen stays black. When I press the caps lock button, it turns green which I guess means he lit. I've also heard the startup chime it generally makes when you turn on. I already tried to turn it on and off several times and reset the SMC and the LANDAU... The screen is always black.

  Could someone help me please?

  Also a few minutes ago the fan has started to make noise in the macbook...

  But the screen remains black.

  Thank you

  Shaynidw

  Hi shaynidw,

  From your description, it seems that your MacBook Pro is powered, as soon as you hear the startup chime and see the light on the keyboard.  Thus, it seems that the problem may be with your screen or the video card.

  On the screens you see when you start your Mac

  Power on

  

  When you turn on your Mac, display is off (black) and you hear a startup chime. Your Mac Initializes his BootROM and memory (RAM live). It then performs a power - on that self test (POST) and a test of BootROM. If you hear beeps or chimes at this stage, this indicates a possible hardware problem and start stops. If you add memory to your Mac, check that it is installed correctly.

  White screen

  

  After that only walking self-test is completed, your Mac sends a video signal to your connected screens. The screen may appear black or grey at this point in the boot sequence and backlight of the screen should light up. If you do not see the image appears on your screen after a few moments, try increasing the brightness of your screen. If you use an external monitor, make sure it is properly connected and turned on.

  shaynidw, if set up the brightness of your screen does not help, you have an external display (computer screen or TV) that you can attach to your MacBook Pro to test?

  In addition, you can try to start your computer in safe mode to see if you get different results.

  Try safe mode if your Mac does not end commissioning

  If the problem persists, you may need to take your computer to an Apple Store or service provider authorized Apple , so they can inspect the video card and cables to isolate the problem.

  Take care.

• Satellite A300 - turn is not on, the screen remains black

  I have a laptop Satellite A300. I tried to turn it on when I got home from work and the screen remains blank. The bottom (plug, power and battery lights) turns on but the screen remains black.

  Can someone help me?

  Hello

  It of hard to say what's going wrong here, but maybe it s just a small issue that could be solved easily.
  Try this;
  Remove the battery, disconnect the adapter.
  A few hours and reconnect the two parts.
  I had this problem in the past and leave the laptop disconnected during the night.
  The next day, I connected battery and adapter A\c and the laptop worked again

  Maybe this will help you too

• When I start my Equium P200D screen remains black

  Hello

  I have a portable Satellite P200D-139 (WinVista). I left on during a few hours after work a day to to this subject when I came back the screen was black, but there is no way get back on. I have turned it off manually (I know we're not really supposed to do, but I had no choice) and tried to turn it back on to the it, but there is nothing happening.

  I can hear it start about 2-5 seconds, then it's as if he won. I can still hear a slight noise hum (fan), but it is not from, and the screen remains black. Nothing lights up.
  I tried to cool, I tried to remove the battery, nothing works.
  I tried using F8 to repair, but is not answer either.
  I don't want to reformat it completely right now that I have docs and photos which I did not have time to put on the disk.

  Anyone would be able to help me with this? That's my working tool, so I'm kinda stuck with this problem.
  A big thank you to all those who can help.

  Kind regards
  Stéphane

  Hi Stephanew,
  as I recall it has an ati graphics card...

  but try this to get your machine to work:

  -pull out the hard drive to protect your data (Let's hope that there is no damage yet...)
  -take out the battery and try to start only with the power adapter > shoukld you see the toshiba on-screen logo > failure other components can be 'guilty '...

  -attach an external monitor to your computer and check if there is a visible image > no image at all?
  -check the memory, for this purpose, remove the memory and test if the satellite "buddies" > heard some of this? Yes?

  iasume the grafics card disappeared... see your certified partner...
  Let us know if this helped you.

• Screen remains black after start-up M30X 124

  Hey there...

  I hope someone can help, or at least has the same problem. I read trough this forum but can't find anything similar. Description of the problem:
  After pressing the button 'Start', the laptop is a short sound (HDD - load I guess), and then nothing happens. The screen stays black, no sound at startup, loading, fan, hard drive. The only solution that I have because it is to stop the computer again (by pushing the Start button... 7 seconds), rechargable battery, put it in place and try again. I had this problem for 4 or 5 times now, for two weeks. This issue scares me. This may indicate that something in my laptop will soon die...? !

  Thanks in advance... Welcome, Dero!

  Hello

  This problem occurs with use of the battery or if the device is connected to the power adapter?
  Have you had problems with the battery charging procedure?
  I'm not sure, but I guess there is something wrong with the battery or the electronics of power supply. I recommended to remove the battery for the work with the AC adapter. Try to discharge the battery completely several times.