failure analysis of diode

Similar Questions

• Failure analysis

  Can anyone help please:

  printer 6510 series prints and copies fine and until a week ago was also quite happy scanning.  now, he says it is not connected to the computer.  It is on a wireless network and I ran a diagnostic test and nothing seems to be wrong.

  Why should that be a problem?

  Hello jimmymac_fab,

  Welcome to the Forums of HP Support!

  I see that you have not been able to scan for the week last using the Photosmart 6510, how ever you're still able to print and copy correctly.

  What was the diagnostic test that you ran, by the sounds of it that a wireless test report was printed, is that correct? You try to scan with a Mac or Windows computer?

  In the meantime, you can try the steps outlined in this document from HP: A Message appears "No computer found" during scanning. It covers the current operating systems compatible with the printer.

  Thanks for posting.

• SUPPORT WIZARD FAILURE ANALYSIS

  When I try to do a scan using the HP Wizard's Support, it connects to the server, but it fails everything, except the last. What does that mean? It worked well but is more last month. I haven't added anything new. I disabled the firewall and anti-virus software nothing works. I am running Windows 7 64 bit on a laptop Pavilion DV6 - t.

  Installation of HP programs will launch an error message saying that it is not for your system and stop the installation, HPSA is not model specific, only 2 different ones, laptop or desktop.

  Try the HPSA.

• Why am I failure analysis: could not detect face in video input when you use the Morph cut?

  

  I kept getting this error and it is solved. Here's how I did it:

  I had the morph cut applied to two sequences nested multi-cames. himself with sequences nested for each camera, who then had an adjustment layer for a class of color Lumetri.

  I cut the part I wanted to morph Cup to the and flattened the original completely to raw clips nested sequences (with all the deleted effects).

  I applied the morph cut between these two raw elements, and then I copied the layer of color on this article with morph Cup.

  This solves the error exception for me. If you have similar effects on your clips, try to remove them and applying on an adjustment layer.

• Management of switch software

  Hello

  I am trying to develop a system to monitor the components on the cards of PCB in the oven, it s essentially has a failure analysis of components such as C, resistors and capacitors.

  Here are some of my test system

  The test system must monitor the components on the PCB 1 year.

  I want to measure the resistances and abilities using a RLC to identify the problem. Failure of the resistance is identified with an open circuit and a failure of the capacitor is identified with a circuit short circuit/open. I have a 420 capacitances to measure and I would like to automate the measurement using multiplexers of NOR.

  I got to watch the first ability (C1) 3 minutes (which would be linked to the first input of the multiplexer), followed by second 3 minutes and so on. Once all 420 capacities are monitored, the loop must start from Capacitance C1.  I would like to know how to program the switches of the NOR. Could someone please suggest me how to proceed with this. ? Is good enough to automate Labview switches or should I go ahead with the switch management software? Can you please explain in detail because am a beginner in Labview?  Forward to your response. Thanks in advance

  Hello switcher.

  Yes, LabVIEW is an ideal programming environment! .

  I suppose you have no switch OR equipment at the present time.

  Measurement of the capacitance range are you watching?

  What voltage are the plugs at?  Looks like it's just a test section, but I guess the capacitors to be held at a constant DC bias?  (Otherwise, the test data that you collect is capacitance of the real world).

  Without any specific input except the number of capacitors, I recommend 5 multiplexers of PXI-2575 x configured as a 2 son 98 x 1 mux.  You can use the PXI-2575 x modules only 3 in mode 1 wire 196 x 1 if your DUJT capacity is sufficient to overcome the parasitic capacitance total of 420 caps (all the negative wires would be linked to the negative contribution of the IGS), but I recommend the approach 2-wire, because it isolates each CAP in a differential measurement.

  The PXI-4072 has a function of measure of ability.

  With respect to the software, I recommend using NOR-DAQmx switch API, but you can also use the OR-Switch and NI Switch Executive API as well.  However, I think that NI Switch Executive is excessive for this application, and it will take a unique session for each switch OR Switch module (OR-Switch is consistent IVI and IVI has no concept of linking several modules).

  .. ask away if you have any questions.  I'm not "wait I answered them: all in this first response."

• What happens if several consumers - whose architecture SW should I use?

  There are several models of VI and documentation on the producers/consumers type aqrchitectures

  I have some experience with LV, but limited experience with multi-threading programs and events.

  My question is what happens if the consumer also produced data? ... the tutorials do not really extend to it.

  In my application, I have 3 USB CAN transmitters and a NOR-DAQ.

  I intend to have loops or threads for each multiple hardware device at the lower level.

  There will be a loop of the UI (producer) and a "test step sequencer" interpret the activity of the façade and send commands to the hardware devices to take action or perform a measurement.

  My main problem is what is the best method/practice of transmission of data to the 'test step sequencer' material once the acquisition is completed?

  Do you use the same queue to pass data back (for evaluation of success/failure analysis and test) or any other method.

  This might work.

  A difference between the Registrant and the queues is that with queues, you can be sure that the loop of consumer gets the message (assuming that there is no problem with the producer generating and sending).  Even if the consumer is busy doing other things, the message waits in "inbox" of the consumer until he is ready to read.

  A notifier, there is no guarantee that every piece of code that expects a notification will get all messages.  Think that the declarant is a whiteboard.  A message to put out there for anyone interested to read.  But when a new message to be sent, the sender is declined, clears the Board and writes the new message.  If someone who is interested in messages has been busy and you can't go to the Commission while the first message is there, it will never see the message.

  If you want to ensure that each loop gets all their messages, then just a queue for each loop that behaves like an Inbox.  If you need to send the same message to several loops, then queue the data in multiple queues.  If you get a message back, enqueue sending loops reference to queue in the data (self-addressed stamped envelope).  (you can also put a Boolean value in the cluster that could be an indicator as to whether the 2nd loop should send something again or not.)  If you need the first loop to wait for the return data before you go, then he's waiting in the queue.  But you can use the time-out function so that it is not wait forever for something that never comes back and integrate logic into your program so that it can handle this situation (doing nothing, resend the message, open a session, or displays an error message...)

• HP Pavilion G6 2252so closing down due to the high heat (fan was cleaned up)

  I'm trying to fix a G6 model due to heat issues. The laptop is about 1 year. From what I have read on the internet, it is mainly due to the accumulation of dust. I told the owner that this was not covered by the warranty and offered to help with the cleaning of the fan. I completely cleaned the fan (incl. Remove the fan cover) and change the thermal paste on the processor. The problem persists. With the Speccy program, I read time of departure. for CPU to 90 degrees celsius. It's very different when the laptop shuts down. Sometimes it happends fast, at other times, he can run for hours. Even if the processor is completely cold, you can stop even before windows starts correctly. I managed to see the temperatures over 150 degrees celsius which should be alarming high. Even 90 degrees seems VERY high to me. The air blown by the fan seems not hot. It is only moderately hot and adjusts it fan speed according to the temperature. He begins to rise from more than 100 degrees. 90 to 99 degrees it runs pretty slow.

  If I try to go into the BIOS, I have only seconds before the closed laptop.

  From my point of view, he owes me two temperature sensors not working not properly, or the manipulation of temperature sensors is misinterperet, or simply the cooling system which is default. I don't know how the cooling system. The seat has a cobber lead wires for the heater and the fan. The tube contains a fluid? The liquid could somehow have vapourised?

  Be warm and helping the owner canceled its guarantee, now that I've had the dismantled oidissement?

  I tried to havn't updated the BIOS, because I'm afraid I'm going to brick the laptop, if it goes out during the process.

  Where is the temperature sensor placed on the Board? Is the sencot'en CPU built in or is it place in over/under it?

  How can I help the owner more far.

  Best regards

  Frank

  @FrankH82

  Hello again. I had actually read what you have written, but included these pages although I knew you did a large part of him he was already comprehensive, but also a reference to the point in case there was something on the picture in one of the documents that you may have missed, as a task to clean. I also realized that the BIOS update has been in the process as well, but guess you wouldn't do that, according to your previous statement, and that's understandable. I have not updated the BIOS, either when the PC has tendency to overheat and stop in the process (and brick it).

  In addition, there is the part about hardware failure analyses. From what you describe, it seems to me that the fan does not work as it should and is the likely source of the problem. If the unit is running too hot that you mention and the outgoing air flow is not so hot then there isn't enough air stream passes through. If instead it turns out to be a sensor problem, which is most likely going to require a replacement of the Commission.

  I have included the Service of Guide so that you can see how disassemble the unit safely if something had been missed in your household, and also, so you should have access to the parts list, if it turns out that the material is the source of the problem, since it includes the reference numbers for various sections that are replaceable by the customer including the fan and the heat sink (, motherboard, etc.) I have also included in part to answer your question on heat sensors that you request that are not listed as replaceable parts by the discreet.

  With respect to the copper pipes, they are units normally sealed with a small amount of distilled water inside at less than the normal pressure to reduce the boiling point of water, sort of way, it is meant to vaporize to help dissipate the heat. The only reason why the liquid inside would be gone is if the seal in the hose is damaged. If this is the case then it should be replaced.

  Now at this point, other than hardware problems as possible, as the system of cooling or the motherboard, which might need replacement, you can also look at the possibility of a cooling plate to increase the airflow. I myself for one of my laptops that I have left my son to use. He was very helpful while working in a warmer room in summer. It could be a quick thing to try so to make reliable unit until the likely hardware problem is resolved.

  Finally if you don't find that it is the material that needs to be replaced you should try calling the technical support to the 800-474-6836 line. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  I hope this helps.

• Error message when you try to update Windows Vista - error attest 80070641 / 641

  I guess that many people have had this problem, all of a sudden.

  When you try to do updates on May 9, 2012, there were several updates available for me (23 in total).  I have windows updated put in place to notify me when updates are available (always have it) so I can see what will be installed (and not installed) on my machine.  He 11 successfully installed the updates and 12 in vain.  I try whenever I turn on my computer to update the 12 failed and failed in each attempt.

  For the record, I tried several remedies posted on this forum nothing is done.

  Attach it to the tool = failure
  System File Check = failure
  Update system = failure analysis tool
  Windows Update Agent = failure
  Stop the service (wuauserv), empty folder to update windows (C:\Windows\SoftwareDistribution\Download) files = failure
  Tried to install the other updates separate security updates = failure
  Tried to install other updates separate updates security = failure
  Other suggestions = failure

  I just do a fresh install of Vista 32 bit (with service pack 2) on a SSD to return the 15/03/2012. I update my registry every 2 to 3 weeks.  The last program that I've updated was Adobe's Flash plugin on 04/05/2012.  Before that, it was an update to AnyDVD is 30/04/2012.  The last program that I installed was a kit of expansion for the Sims 3 on 19/04/2012.

  This problem just happened out of the blue.  Never had any problems with updates like this before until 09/05/2012.

  Here's some of my windows update log file. Looks like I only selected 4 security updates and 8 others are not selected on the left.

  See that this related thread (in particular the JanetD post which includes what told him IOlo support)-online http://answers.microsoft.com/en-us/windows/forum/windows_vista-windows_update/getting-error-codes-641-and-80070641-when-trying/6022df1d-7914-4e3e-ac5e-dbef07df433c

  Otherwise, contact the IOlo Support yourself.

• Problems with the updated driver!

  Hey there while I posted a message here a week or two ago I had a helpful answer on the Download Center as a place to check my drivers that are not up to date, I've done this and 2 drivers that will not update auto where not on the list of drivers up to date I am a bit confused in the latest auto shows a Red Cross to side of them instead of the green check mark. but there was 1 driver to update I did and now I have another problem to help support H.P. maintain section when I click refresh, it launches the health analysis. It is said

  connceting to the col of hp Server

  Download of updates fail

  failure of the collection of information

  in the event of system failure analysis

  prepare the collar of action list

  its all very strange any help would be appreciated under is also the original message I posted thanks

  Model #: p6720de

  Windows 7 64 bit

  Thank you for the information.

  Here is a link to the support web portal for the desktop p6720de.

  Install the HP Support Assistant update and then open the Support Wizard--> maintenance and a tune-up.

  Please post your positive or negative results.

• Noisy fan UCS 6248 fabric Interconnect noise RPM

  Hello

  Our pair of interconnection fabric installed 6248 produce a FAN noise.

  Is it possible to reduce their RPM? So can be more silent? The server room have good air conditioning.

  Some newspapers like below:

  Fabric - Has (nxos) # show the fan environment details

  Fan:
  ---------------------------------------------------
  Module fan air Speed (%)  Speed
  Direction
  ---------------------------------------------------
  1 1 front-to-Back 60 15428
  1 front-to-Back 2 60 11065
  1 front-to-Back 3 60 14835
  1 front-to-Back 4 60 10997
  2 1 front-to-Back 60-15000
  2 front-to-Back 2 60 11134
  2 3 front-to-Back 14835 60
  2 front-to-Back 4 60 11065

  Power supply:
  -----------------------------------
  Configured module air flow
  Direction speed (%)
  -----------------------------------
  Front-to-1 Back 60
  2 front-to-Back 60
  Fabric-A (nxos) #.

  Fabric-A (nxos) #.
  Fabric - A (nxos) # show environment

  Fan:
  ------------------------------------------------------
  Fan model Hw status
  ------------------------------------------------------
  Chassis-1 UCS-FAN-6248UP - ok
  Chassis-2 UCS-FAN-6248UP - ok
  PS - 1 UCS-PSU-6248UP-AC - ok
  PS - 2 UCS-PSU-6248UP-AC - ok

  Temperature
  -----------------------------------------------------------------
  MajorThresh MinorThres CurTemp sensor module status
  (Celsius)     (Celsius)    (Celsius)
  -----------------------------------------------------------------
  1 ok taken 67 58 35

  Power supply:
  Voltage: 12 Volts
  -----------------------------------------------------------
  PS model power input power state
  Type (Watts) (Amp)
  -----------------------------------------------------------
  UCS-PSU-6248UP-AC AC 780,00 65.00 1 ok
  2 UCS-PSU-6248UP-AC AC 780,00 65.00 ok

  Model power power power power status mod
  Asked asked allocated allocated
  (Watts)   (Amp)       (Watts)   (Amp)
  --- ----------------------  -------   ----------  --------- ----------  ----------
  UCS-FI-6248UP-SUP 492,00 41,00 41,00 492,00 1 power
  UCS-FI-DL2 24.00 3 2.00 24.00 2.00 under tension

  Summary of the use of power:
  --------------------
  Power supply redundancy mode: redundant
  Operational mode of power supply redundancy: redundant

  Total power 1560.00 W

  Reserved for directors of research 492,00 W of power
  Power currently used by Modules 24.00 W

  -------------
  Available power 1044.00 total W
  -------------
  Fabric-A (nxos) #.

  Felipe,

  Please open a TAC case to see if the problem is in the hardware level (a show of UCSM tech will be necessary) an engineering failure analysis may be needed to determine what is happening.

  -Kenny

• How to activate screenshot

  I just noticed that I can not get the screenshots with the print screen.  I have windows 7-64, with all updates.  I have two monitors, accelerated, and I can't copy screens more.  I know not how long this has been broken, but many others are also complaint.  It is said that you have to disable video acceleration.  Video acceleration was not a problem before.  I took screenshots for years without problem.  There is no image to the Clipboard.  I think that the screeen gives a little thrill when I hit the key, but no screen not turned on the Clipboard. Please do not spent as standard in the 1990s and call it answered.

  I'd vote for the antivirus mode without failure analysis.  I have run with the AOL tool and had no problems with it.  Thanks for the comments.

• not triggered alarm not: insufficient vSphere HA failover resources

  This alarm is only triggered when a HA action fails?  I have a cluster of two hosts ESXi 5.0, and since I'm on more than 50% of available memory on each host, for me, it seems that I can't tolerate a single host failure.

  

  HA and DRS are enabled on the cluster, and the "admission control policy", I have 'percent of reserved failover cluster resources', set at 50%.

  So why no alarm?  My goal is to get an alert before to reach the State we begin, where we cannot tolerate apparently not a failure of the host.

  > Based on this and the absence of the alarm, we can assume that if I dropped one of the hosts of this 2-host cluster, all the virtual machines would be able to start on the only host remaining, correct?

  Correct, if one of your guests crashed or zero all your VMS would have sufficient resources to start (no guarantee of performance, just start/running)

  > And the alarm, I want to talk to the title of this thread only is triggered when what 98% to 50% or less, correct?

  There's no alarm. When your ability to failover CPU or memory reaches 50% admission control will prevent you from turn another VM

  > I am still concerned about the diagram of distribution of this resource for memory, however. It looks like I could push up to 100% on both hosts and still no push failover memory less than 50% capacity. I guess that this is due to the fact that my virtual machines have no memory reserved, so vSphere counts only the minimum amount of memory to start the virtual machine, and it will depend on permutation and balloon so all virtual machines start actually using all of their memory.

  Fix

  > So the alarm I'm looking for is the one that reproduces the table of distribution of resources and alerts when the total unused memory in the cluster is less than the total memory to a single host.  Make sense?

  I'm not aware of an alarm like this. You may be able to find something through google or create something yourself. On the creation of reserves for your virtual machines? Or less the most important? This way you can ensure that they will get resources when they restart. Or if you really want you can replace admission control by hosting dedicated failover policy? (I do not think that I recommend with what I know of your situation, but it will give you what you ask for).

  Have you watched the vRAS fling? VM and Service availability & #8211 resources; VMware Labs

  This adventure allows you to perform a host on your infrastructure failure analysis. You can simulate the failure of one or more hosts in a cluster (vSphere) and identify how:

  • Virtual machines will re-start safely on different hosts
  • Virtual machines would not be restarted on different hosts
  • Virtual machines would be the degradation in performance when rebooted on a different host

  With this information, you can better plan the location and configuration of your infrastructure to reduce the downtime of your virtual machines / Services in case of failure of the host.

• read S.M.A.R.T. in PERC H710 Mini disc?

  Hello

  I have a few servers Dell R520 (all running Win 2012 64 bit) with the H710 Mini Raid PERC controllers inside.

  Is it possible to access/view S.M.A.R.T. attributes of their hard drives? Dell OpenManage Server Administrator can only tell info like "physical disk is OK" or "physical disk is Non-critical," which is not much. I want to see more details. I use on older machines Dell Crystal Info disc, but the R520, is not to see all readers (and other similar utilities, I tried were also blind).

  (OMSA is version 7.4.0 and hard drives have SMART)

  Any tips?

  Thank you

  Hello.

  We will be happy to advise.  The S.M.A.R.T error can be found on the BIOS OF THE controller on POST via CTRL-R. It is under the column PD Mgmt for physical disks.  Highlight each drive and see the right side of the screen for information about the number of errors. However, that's all he says.

  It is recommended to use the OMSA software to export the detailed log. The log file will be in the form of a text file and can be exported from the configuration options of the controller-level information. You can check the newspaper for "BADLBA" (bad logical addresses) or other sense key errors.

  Otherwise, the software will be asked the failed drive arriving at a certain limit of non correctable errors in which the player will then be marked as PREDICTIVE don't allow you replace before switching to offline mode, causing a degraded VD.

  Finally, it is built in the diagnosis of the USC F10.  Although it will not display the errors detailed by car, you can run the hard drive test accordingly for the General failure analysis.

• Missing metadata patch

  So I have a swarm of ESXi Embedded systems connected to my VirtualCenter server, and I want to use the update for the patch up to current. I them attached to the "critical" and "non-critical base lines. When I try to scan, the analysis fails with:

  Failure analysis of HOST name for the updates.

  Metadata for the missing HOST name patch. Please download the updated metadata.

  Now, I'm not a model. I have read the forums, I saw the wire and the KB article on multiple NICs in my VirtualCenter server and I edited this file vci - integrity.xml, or whatever it is, to have the URL for the Virtual Center Server. And I confirmed that the ESXi host in question could also well ping and resolve the virtualcenter server. The VirtualCenter server has free access to the outside and has no problem talking to vmware.com or what was than the other site that was included in the KB articles.  There's another KB article which mentions the opening of ports in firewall on the "ESX host", but appears not to be an option with the ESXi host, at least not anywhere I've seen.

  Support tells me that there are only two ways to handle upgrades on ESXi embedded systems, using the "VMware Infrastructure Update" application (which requires connecting manually each ESXi host) or with a command line tool.   Frankly, this seems crazy to me given the Update Manager seems to be orders of magnitude more powerful in terms of what it can do, and I can't imagine ESXi users forced to do things "the very hard' like that.

  Does anyone have experience with this they would like to share? I'm getting very frustrated...

  See you soon,.

  Derek

  Do not forget that the DNS resolution works for the name VC and ESX.

  Make sure also that you can reach Internet of VC and ESX.

  André

  * If you found this device or any other answer useful please consider awarding points for correct or helpful answers

• vamicli update - check: failure: obvious editing error analysis.  Please contact your dealer.

  To better understand the process of update, I built two versions of my virtual device.  I installed the one 'old' and I'm doing it to check updates.  When I check for updates (with the web interface or the vamicli interface, below), I get the same error:

  vamicli update - check failure began: obvious editing error analysis.  Please contact your dealer.

  Now, I kind of cheated on the repository.  On my VMware Studio camera, I use the web server integrated and created a directory in/opt/vmware/www/ISV to use as a custodian, because I'm just trying to test such things out in my lab.

  Having done this, I can see in the newspapers of apache2 on my VMware Studio device it is manifest, indeed, read (I turned on the access_log):

  10.86.150.84---19/Aug/2010:18:50:35 + 0000-"GET /ISV/repository/manifest/manifest-latest.xml HTTP/1.1" 200 66821

  The build process had no problem putting a bunch of files in the repository, and it seems that the 'old' device becomes the file downloaded correctly.

  But he doesn't seem to like the file...

  Other things to note: I'm doing this in a laboratory without access to the internet and if no proxy either.  I was wondering if there were files that had to be pulled from the internet open to allow analysis to what appears to be the python .xml, but through some hacks that I don't even want to discuss, I do not see any other access on the web of the device when it tries to check the updates.

  I tried to strace the vamicli-update, but... There are a lot of things out there, and I can't find clearly something wrong.  Missing a lot of things, but the actual analysis (if it is really what is a failure) is far from clear.

  I found where the error message comes (with ropes), it's:

  libcmpiVAMI_Update_Provider.so

  which is not a surprise.  I can't find the source for this anywhere on the VMware Web site, so I don't know exactly what goes wrong.

  It is difficult for me to believe that he is really a parse error - somehow, I imagine that something in the environment is simply not true and that is causing the parser does not properly or maybe he failed even to the analysis.

  But if anyone has some answers (or ideas of what to try next), I would of course like to hear.  Thank you!

  The list of RPM packages installed in the virtual machine is analyzed once the build is complete, then the manifest is generated from that.  In this way, all additional packages which is drawn in ISO, etc. are included.

  -Matt