Failure of system restore in XP, all I get when I run the restoration now is an empty white box

Similar Questions

• I need the URL for the default home page so I can put it in my homepage protection, because all I get when I open the browser's "about"white."

  I'm going to hell to get just the URL for the browser/Firefox start page. I just did a recovery image factory and all I get after downloading and installing the Firefox browser a tab that says 'about white." I don't get the URL in the address bar so that I can put this URL in my homepage of protection (I use Advanced System Care ultimate). Once I get this URL and place it in the area of protection of homepage of my security software, I'll be ready to go, because I want to use Firefox as my default browser. I searched the frequently asked questions and asked the question in every way that I know, in English, and there seems to be no one there who can tell me just the URL of the start page. While I do not understand why it is so hard to get, I certainly need and would be grateful for a solution to this problem.

  It is actually called Subject: Home , but the only way to know would be if you were viewing the page and called to the top of the Page Info dialog... who, for future reference you can get using one of these methods:

  • Right click on a box empty page and select View Page Info
  • (menu bar) Tools > Page Info
  • Click on the globe or padlock icon in the address bar > more information

• All I get when I download the last clouds is a black screen

  All I get is:

  http://screencast.com/t/KsBg0srS

  Please help, I have tried everything I can think

  I spoke with a representative and it was my graphics settings. If anyone sees this problem, the best thing to do is right click on your desktop, click on "Configure switchable graphics" and indicate the creative application of cloud 'power saving mode '.

• Vista OS does not load. I tried booting and the load screen bar continues to work without success. When you run the start he stops to c:\windows\system 32\cmd.exe that I don't want to lose my files so I have not reinstalled. Any suggestions?

  Vista OS does not load.  I tried booting and the load screen bar continues to work without success.  When you run the start he stops to c:\windows\system 32\cmd.exe that I don't want to lose my files so I have not reinstalled.  Any suggestions?

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Data recovery, if/before you reinstall:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  See you soon.

  Mick Murphy - Microsoft partner

• Director - I added an audio file, but when I try to add another mp3, all I get when I play again is static

  I added an audio file, but when I try to add another mp3, all I get when I play again is static. Why?

  You might have better results if you converted audio files
  to the. Format WMA before you import into Movie Maker.

• When you run the Microsoft Security essentails I get the message "the program is blocked by group policy. For more information, contact your system administrator. »

  When you run the Microsoft Security essentails I get the message "the program is blocked by group policy. For more information, contact your system administrator. »

  Original title: microsoft security essentails

  Hi Kim,

  The description of the problem seems a little unclear and I wish I had a better understanding before you start working on it. I appreciate if you could help me with more information.

  1. when exactly you receive this error message?

  2. are you on a computer in the domain?

  3 is the Microsoft Security Essentials-specific issue?

  The error messages say about group policy which is the collection of settings that define the appearance of a system and how it behaves for a defined group of users. Microsoft provides a program with a console (Group Policy Microsoft Management Console). The console allows programmers select a GPO that is linked to the directory of centers for domains, organizational units or sites. GPO provides the programmer with security options, the software installation and maintenance options, scripting options and the folder redirection options.

  Response with more information to help you.

• hard drive failure, System Restore, now all of my media and documents files are missing, just GONE. all ideas

  I was workiing online, and I started to have problems with ie10, freezes, stop down, and then the entire HDD crashed, any program, file system went. System Restore used to regain control of my computer, but now all my media files, music, photos, everything is over. How can I identify and restore them. Documents open in word, but there is no trace of them in the library files... etc.

  Your hard drive has failed. If she had done this you would have to buy and install a new one, and you would have lost everything.

  If it just crashed and you have used system restore and running to get to the top, then all is not lost, probably... unless the files are damaged by the accident.
  Do a search on your hard drive. To find the word docs using "* .doc" (without the ""). To use "*.mp3" mp3, wmv files use "*.wmv" etc. The asterisk (*) is a wildcard and the search results will include all these files, the research is on your hard drive.
  Make note of their location and then reorganize their or re - point your assets their location.
  See you soon,.
  Jerry

• System Restore, now all I have is a white screen

  This a gateway MT6451 laptop with an AMD Turion 64 X 2 Mobile Technology TL - 50 256 KB x 2 L2 Cache, clocked at 1.6 GHz, 1600 MHz processor Hyper Transport technology, running Vista Home Premium. After the reboot, I suspected something was wrong because my computer started acting strange, slow, would not open Internet Explorer without having to restart a couple of times... ect. A friend suggested you do a system restore. I chose the first available date and received a message that the action could not be completed. Then I chose the next earlier and had to leave to go to work. When I got home, there was just a white screen. I restarted and when it got to the point that it should have been at the level of the office, there was just a white screen. I tried to restart once or twice more, same result. I discovered that I can access files via the Task Manager, but it seems I can only access data files. If I try to start a program such as Internet Explorer, I get a message that the file is not found. Thanks for any help, that all the world can offer.

  Hello

  Since you choose the earlier restore point, it would have een referenced to a point when the computer is in the initil stage when it has again been updated.
  Please follow the steps mentioned in the article and view the results.
  Method 1
   
  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  If the question presists then try,

  Method 2

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: Please follow step 7 in the above mentioned link to start the computer in normal mode.
  See also,
   
  Why my screen is black when I start Windows 7? (For Vista)
  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-screen-black-when-i-start-Windows-7
  : Note follow all the methods mentioned in the link above by decree for efective troubleshooting.
  Method 3
  Run a SFC system analysis

  http://support.Microsoft.com/kb/929833

  I hope this helps.

• I need to restore my windows xp system, but when I run the system restore program, I get the message that no changes were made and to choose another restore point, but all have the same results. Why?

  the system restore program is activated.

  A restore point is selected. program is activated.

  It runs and after system restart, it is said that no changes have been made, run another restore point.

  Same results every time!

  Help!

  Hi larryburrage,

  1. did you of recent changes on the computer?

  2 when was the last time it was working fine?

  3 do you have Norton installed on the computer security software?

  If you use Norton Security software on the computer then refer to the article below and check if it helps.

  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

  If you don't use security software Norton then temporary deactivation of security software installed on the computer and check if it helps.

  Important: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

• Failure of system restore,

  I had to reformat the CD four times now and every time that system restore works until I have a problem, and then he goes through the motions but appears as an unspecified error and no changes have been made. I tried it at the command prompt, but should not be the order. Restore Dell PC also fails to work when I do Ctrl F11. This has happened other times as well. The computer is working reasonably well, there is just something weird is going on with the modem and internet connection I thought about a system restore can fix. .. JED Stuart

  Reference:

  http://techpaul.WordPress.com/repair-your-Internet-connection/

• a system restore. now, I have only a picture of office.

  has problems with the PC and did a system restore.  After restoration, released on very well connected and office came.  nothing, no taksbar, start menu, nothing.  only the peak of office.  No, I can't do another restore of the system in safe mode.  Made mode without failure/invite commands and typed in systemrestore, etc..  nothing after hitting enter.  do not go to the recover window.  Help. any ideas?

  To run the system restore from a Safe Mode command prompt, you follow the procedure described in the following article?

  "How to start the System Restore tool by using the option of safe mode with the command prompt in Windows XP"
    <>http://support.Microsoft.com/kb/304449 >

  Something else you can try...  When you get the white screen with the screen, try hitting Ctrl - Alt - Delete if you have XP Home Edition, the task manager should start.  If you have XP Pro, a window will appear and you can select 'Task Manager '.   After starting the Task Manager, click on the 'Applications' tab, and then make a file-> new task or click on the "New task" button at the bottom.  In the next window, enter "Explorer", click on "OK".  With luck, you get again.

  HTH,
  JW

• My computer crashed so I did a system restore, now I can't restore it

  now my dvd, cd, windows media player and a bunch of my programs do not work, my system restore appears as a blank page, I've tried all the backdoor programs I can think of and still nothing. I need either reinstall my dvd so I can use my boot drive or find the right file to execute the version debug or safe mode HELP me please! I want to return to the default value of the factory. Or solve the problem, but I have to do something. At this point I don't care if I lose all the things I have on my computer because most of the time I saved online them for example. my photos and others. HELP me PLEASE before I take this CPU and place it under the wheel of my van and run it until it is has little pieces in my gravel!

  Thank you

  Lisa

  Hello HOK CHHEANGUNG.

  Looks like you dΘmarrez not yet to the point where you can choose to enter the BIOS.

  I recommend you contact the manufacturer of your hardware on this.

  Also, I recommend you create a new thread for this case because there will be subtle differences between your question and the one mentioned in this thread.

  Let us know if you have any questions.

  Best regards

  Matthew_Ha

• She launched 'System Restore' now the computer will not complete the installation

  Clean HP Pavilion bought in 2003.  With the help of daughter for school work.  Computer running very slow.  A ran all the relevant boxes virus / malware scans, the old deleted files ' ran fix disk, disk cleanup and defrag, still running slow.  A ran the 'System Restore' edge (press F10 during boot).  It works through the restore program and sit as I just opened the box.  Through the implementation of procedures and click Finish and it is just there for up to 6 hours before I finally gave up.

  Oh Dear Brian, I hope there is no data file on the computer, you will need in the future. The F10 key is the path to the system recovery that restores the computer to the factory settings. It comes to the computer when it was bought new in 2003. It erases all the data files and installed programs from the drive. In other words, you start again:
  http://www.pctechbytes.com/HP/HP-recovery/

  What is the exact model of HP Pavilion?

• System Restore, now INTERNET NO connecttions available, and Norton is disabled

  I downloaded a specific file relating to a VST in a DAW. He brought a bunch of * on my computer--none of this seeming harmful, just annoying, so I did a system restore. There is no 'available' internet connection, Norton is off, etc. I don't have access to a phone at the moment, I'm using my friends computer. I'm sorry if this has been asked, but I feel like I'm pressed for time, if this is actually a bad thing.

  Hi Thorrin,

  1. What type of internet connection on the computer do you use? What is a wired or wireless?
  2. You get the error message? If Yes, what is the exact error message?

  It is likely that the network driver is damaged, because of which you might face this problem. Follow these methods to solve the problem:

  Method 1:

  First of all, I suggest for the link and try to run the troubleshooter and check if it helps.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2:

  I suggest you to refer to the article and see if it helps:

  How can I troubleshoot network card?

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-fix-network-adapter-problems

  Let us know if you need more assistance. If you have additional questions on the computer, please ask your question about Windows and we will be happy to help you.

• When I run the system on the platform of Vista restore, I get the message "an unspecified error occurred during system restore. I tried several restore points. Anyone have any ideas?

  See above

  Hello

  There are a variety of reasons for system restore problems

  Norton and Norton product Tamper Protection is the main

  Read about it:

  http://us.Norton.com/support/kb/web_view.jsp?wv_type=public_web&docURL=20101101224849EN&LN=en_US

  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

  You can try restoring the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  and malware can interfere with the restoration of the system

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.