Failure of the system (?)

Similar Questions

• Is windows update causes the failure of the system?

  I have windows XPsp2 and I've updated with XPsp3 and it takes place in a few errors and the failure of the system to my PC. Unlike my aunts PC she XPsp1 with a slow internet connection so she was not able to update, but it works for more than a year. then the causes updated a few problems in the future?

  No, do not keep your computer fully patched all the time causes more problems.

  4 steps to protect your computer
  http://www.Microsoft.com/security/pypc.aspx

  NB: If WinXP SP3 is not installed by April 12, 2010, your computer WinXP SP2 will not be offered as all other reviews of security updates and the Windows Update Web site will not be available.er

  The above has applied to WinXP SP1 computer your aunt since October 2006.

  For you and your aunt...

  HOW to get a computer WinXP SP1 or SP2 fully patched
  http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

  ~ Robear Dyer (PA bear); MS MVP (that is to say, mail, security, Windows & Update Services) since 2002. DISCLAIMER: I do not represent nor don't work for Microsoft

• failure of the system after the installation of windows 7 upgrade advisor

  original title: failure of the system after the installation of the Advisor to upgrade to windows 7, which now, I can't delete

  My Winows Vista worked fine until I downloaded the windows 7 upgrade advisor - the system crashed, only load windows in safe mode, and when I try to delete the Upgrade Advisor program, it tells me windows service install is not available...

  Follow these steps to try to solve your problems of boot.

   

   

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  .

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Transaction is written to the log file and it is not written to undo tablespace. During a failure of the system how oracle rolls back the transaction.

  Hi all

  My question is:

  Transaction is written to the log file and it is not written to undo tablespace.

  During a failure of the system how oracle rolls back the transaction.

  I have already provided the answer, you ignored if well (you seem to only read the responses by people of your country).

  Redo log is always written * first * before * writing to the data block (redo log writing is much more aggressive). So it DOESN 'T MATTER if you lose these scriptures of rollback segment.

  Valuation: rear roller followed by roll forward, using redo log files and/or archive redo log files.

  Sybrand Bakker

  Senior Oracle DBA

• CC have reinstalled due to the failure of the system.  When opened in the image space RAW goes yellow spot, with blue background.  I reinstalled without effect.  At the opening, in RAW, the image is restored for future treatment.  Error occurs with both d

  CC have reinstalled due to the failure of the system.  When opened in the image space RAW goes yellow spot, with blue background.  I reinstalled without effect.  At the opening, in RAW, the image is restored for future treatment.  Error occurs with both dng and arw.  Ideas.

  Try the following:

  In the Camera Raw window, press Ctrl + K (Cmd + K on a Mac) to bring up the preferences.

  Uncheck the box processor graphics use.

  If that suits him, update your graphics driver may allow you to work with the checked graphics processor.

• failure of the system, looking for answers

  Need help for the guys. Had a major failure of the system last week, and I'm a bit confused as to what happened and why I was unable to get free. I lost a bit of my confidence in Vsphere, and I'd like to renew that.

  A bit on the environment, esxi 5.0 U1, with servers HP Gen 8 3 node cluster running. HP P4500 SAN iscsi for vmfs data storage. ESXi is installed on HP's CF cards in servers. This cluster has been upward and running for about 6 months, not a single hiccup before that.

  Wednesday we have migrated 2 of our vm (SQL and progress) to this cluster 5.0 database, the virtual machine went on different hosts in the cluster. The virtual machine was running on a cluster 2 older nodes with esxi 4.1 U2. Machines migrated fine, fine tools updates, reboot, everything seemed fine.

  About 2 hours after that the migration, we started to receive calls that our Progress database is down, users could not connect. Then we started getting more calls, other machines were inaccessible. Glancing from vcenter I could see all the virtual machines in question were on the same host, and I was unable to open the console in vsphere for VMs on that host. The host showed he was connected, showed all the vm connected, but I could not open the console or the desktop remotely to one of the VMs on that host. I started studying, and of course this host fell all the SAN Iscsi network connections. The railways have shown dead. Ports of nic card viewed active, the switch ports showed activity, but the connections were down. I could always ping the address of management for the host however, and ports for vmotion were in place.

  At this point, I started to try and vmotion VMs on that host data base progress, he would not migrate, just sat at 8% prepare to migrate. I tried other virtual machines with the same result. I started to wonder why HA had not kicked, and why I couldn't move anything. At this stage the host started disconnecting from the cluster. I could always ping on the host, but vsphere showed as disconnected. I couldn't move my VM, and I couldn't go to the host via vcenter, via the vsphere client pointed directly to the host, or by using the DCUI.

  So I called VMware support, got an engineer on the line with me, and it became clear we were going to have to power cycle that host and crash all virtual machine running on it. It wasn't a very pleasant for me answer because this database of progress is our main production system, and I was afraid of corruption. We had no choice, so we did. When the host came back upward, fortunately the virtual machine came very well. VMware engineer digging in the newspapers and said that this was with a particular NIC card driver with known issues. He showed me the KB on this issue, and it seemed to be a known issue. We have updated these drivers on all hosts, and that's all.

  My problem with this is that, how is the cluster ran fine for 6 months without problem, and how come the redundant path to the SAN did not keep the connection active when with the path with the bad nic card driver failed? I have 2 different, with 2 NICs different paths for the Iscsi SAN. The other card had no known driver issue. Why both paths failed not just in cause of a driver on one of the cards problem? More worrying is also how is it that I could not immigrate anything, and why no HA kick in?

  Sorry for the novel here, but without all the details is not part of a story. My biggest concern, that's why I couldn't move anything? In the event of a host failure, what you're supposed to do in order to migrate the machines if they don't migrate via vsphere client? We were down for about 2.5 hours, and a lot of questions were thrown on me the senior management as to why my "system available, redundant high" took hours to retrieve...

  Guys here any ideas, thoughts on how I would have handled it differently, reasons why I should be confident everything is fine now?

  Thanks for your time

  Kevin

  trink408 wrote:

  Thanks Matt.

  I guess some of the problem is not completely understand how the HA or Vmotion. I was under the impression once that the virtual machine was not reachable HA wouldn't kick and move the virtual machine? The virtual machine was not to ping requests or accessible by the Office remotely. I couldn't get their power off or do anything through vcenter either.

  If they had no link usable storage, this seems possible.  HA simply does not address the failures of storage.  Not at all.  It IS possible to activate at the level of the VM HA, but it isn't on by default - must be activated on a per-VM basis.  You should read the book by Duncan Epping on this - it's the bible of the AH.

  So in case something happens with the connection of storage, you have really no way to vmotion anything right here, and your only option is to kill the host / VM running on it, and then migrate or leave HA move them?

  Fix.

  I didn't know that I wouldn't be able to vmotion virtual machine if the host has lost its connection to storage. The other hosts in the cluster saw storage.

  The source host is controlling these VMDK, as far as the other guests are concerned (they see a lock on the file) and when they ask the host if its still alive, he answers (because it has not powered the network lost or down, which are the failure mode THAT HA is designed to handle). So they take charge.

  The reason why it took so long was because I didn't kill the host with my concerns for the database. I was hoping that the VMware engineer may have a way to gracefully close things down. So he spent some time looking around and trying to determine what was going on. Ultimately we just power cycle the host, so I could have done much earlier, and if we are facing this again in the future, I would.

  As long as you follow the seller advised for more decent databases (keeping the transaction logs, etc.), don't have good backups, theres no real risk of data corruption.  VMware does not significantly change the i/o path, in order to have the same exposure than on a physical host.

  I still do not understand why the two paths were marked as dead and the host completely lost connection to the SAN, as well as to show finally disconnected in vcenter.

  Well the host went offline because it got stuck in an all-paths-down scenario, which is common for 5.0.  5.1 solves this problem a little.  I don't know why all roads fell, but I suspect that you have a misconfig somewhere... normally you expect at least 4 paths in a system set up correctly on the left.  Check with HP to ensure that you follow best practices.

  Maybe all the IP stack has been corrupted or something?

  Possible, of course, but unlikely.  Never heard before.

  I appreciate the help and the preview, I thought that the problem was a lack of understanding on my part and fully accept it.

  HA and vMotion are complex.  At least now you can go back to mgmt and tell them why he fell more (because it was a failure outside the scope of the software scenario) and may ask for money to build a proper SQL cluster.  Definitely recommend the book of Duncan Epping: http://www.amazon.com/VMware-vSphere-Clustering-Technical-Deepdive/dp/1463658133/ref=la_B002YJMRCY_1_2?ie=UTF8&qid=1363622697&sr=1-2

• Photoshop Elements and the unexpected failure of the system

  Hello!

  I would ask you to reactivate Photoshop Elements 8, after the unexpected failure of the system. For example: my Windows Vista has a Blue Screen of Death, and I have to format partition and reinstall my OS (my material remains unchanged).

  Then install the Photoshop Elements 8 (I bought in the local store), and I'll be able to reactivate my copy of PSE8?

  Thanks for the reply

  Best regards

  Jacek.

  PS.

  Sorry, my English is terrible

  If you have activated only once, then you should be able to reactivate a second time without any problem.

  If you have enabled the two copies, then you will need to contact customer service to obtain your activation reset.

  http://www.Adobe.com/support/service/

• Failure of the system for Windows 8 image backup

  I downloaded Windows 8 a few days ago. I tried to create a system image to an external drive, Western Digital 500 GB (409 GB free) four times and each time after a few minutes a message said that the backup failed. The backup of the recovery Partition seems end OK every time. The failures occurred after a minute or two in the backup of the C: drive of the OS.

  The external hard drive checked OK. The player has already had an image of the system for Windows 7 which was removed before the backup attempt. Here are 2 messages I received as the backup failed. The other 2 were much the same, I think.

  "There was a failure in the preparation of the backup image of any of the volumes in the backup set. (0X807800C).
  The mounted backup volume is inaccessible. Try the operation again. (0X8078004F)."

  "There was a failure in the preparation of the backup image of any of the volumes in the backup set. (0X807800C).
  The specified drive is not found. (0 X 80780081)"

  Below are the 2 files on the external hard drive after the failure. I guess that the first was the complete recovery Partition backup. I don't know much about this sort of thing.

  7da23344-ab79-11e1-887d-806e6f6e6963.vhdx - 7.61 GB
  7da23345-ab79-11e1-887d-806e6f6e6963.vhdx - 7.00 MB

  Anyone have any ideas on the problem? The software only virus on the PC is Windows Defender that came with the operating system.

  Fifth time is a charm, I suppose. I tried saving image system for the fifth time and successfully completed this time. Nothing has changed on my system or readers.

• PCI not found after the failure of the system on the Satellite L25-S1217

  Hello
  you are my last hope in obtaining all devices PCI works again on my Toshiba L25-S1217

  After Windows XP he SP2 English frozen (maybe due to overheating) a few days ago I can't return to work.
  Shows Device Manager three entries with yellow warning "PCI Device" - this device is not configured correctly (Code 1)

  It's:
  Athreos WIFI
  Realtek LAN

  and another device, I do not know
  PCI\VEN_1044 & DEV_0607 & SUBSYS_FF311171 & REV_4C...

  I had reinstalled all the drivers from the Toshiba support website (driver ATI card & drivers South of the bridge and all THE others), without success, so yesterday I restored the system backup CD but still having the same problem.

  I think the problem is with PCI bus driver or smth like that, cause what happened before... but I was able to remedy this somehow. I remember this NIC must be recognized as controller Ethernet - not enigmatic PCI Device - because after that, I was able to install the triver successfully as well as Athreos Realtek driver for WIFI.

  Help, please!

  You probably received the Toshiba Recovery CD.
  Simply boot from this CD and reinstall the OS on the A25.
  This procedure should define the laptop back to the factory settings.

  After installation all devices must work properly because the Toshiba drivers are already included on the recovery CD.
  If the laptop will run not as is, then it must be a hardware problem!

  But it's really not easy to tell what's exactly wrong without putting hands on the laptop! Maybe a control from laptop is necessary

• Failure of the system to Vista Home

  I accepted a download of the sytem on 10.8.09 updates crashed my system giving an error message! Oxc 0190036! 2745/93173 (regsvc.dll).

  -What this means and how can I restore my system?

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not work, try to make a Bootable ERD to do a Startup Repair:

  As is the case with most computers/laptops these days, they do not come with good Vista disc to repair only the recovery disks.

  As your grave in the category above, download the ISO on the provided link and do a repair of the disc.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  You can make a tool to restart system, System Restore, etc. with it.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista repair disc.

  You can do a system restart tool, system, etc it restore.

  There is not a disk of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• USB keys deleting leads to the failure of the system of

  Dear representative of Microsoft,

  I am facing a problem with my USB keys deleting. When I remove my USB port on my desktop (Windows 7), I have a reboot of the system. I think it is a problem of software security and I hope you can tell me the name of the process or service that I must remove my machine in order to recover my machine in order. I feel this way since then plug in the USB device doesn't cause errors so I discount a few electrical problems.

  Kind regards

  RAMU Narayanan

  Canada

  Hello

  You use safely remove?

  How to eject a device with Windows 7 safely remove hardware
  http://www.SevenForums.com/tutorials/10169-safely-remove-hardware-eject-device.html

  -----------------------------------

  Control Panel - Device Manager - hard drives - double click on your drive - policies tab - check
  the parameters. (Always preferable to use safely remove even if you set it to optimize for Quick)
  Deletion.)

  Are there programs that access the drive running. As backup, synchronization, ReadyBoost,.
  and others? Even the antivirus might be checking the drive.

  I hope this helps.

  Rob Brown - Microsoft MVP - Windows Expert - consumer: bike - Mark Twain said it right.

• What is the failure of the system to defragment effect the failure to save?

  Well, I posted this question before, but I think I've ruled out the obvious questions.

  My laptop was backing on a schedule like a charm until May-June when something happened. The last good walk back was in may, and no matter how I put the back upward, custom/windows recommended, make an image etc. I constantly get the message "backup failed" and that the annoying red bar.

  I thought maybe it was the external hard drive, which windows recommends that you use as a backup. In fact, I used this external hard drive before and when my hard drive crashed, it was a God send when I had to reinstall the operating system and all of my personal software.

  Anyway, I always noticed that when I would defragment, which is on a schedule, he used to always say 100% defragmented. All of this, the C drive, the HP system recover and HP tools.

  HOWEVER, I noticed that the system will not defragment completely. It has 5% not degragmented. It took place around the same time that the loss of the ability to save.

  (I saved on DVD but I wish she could be like it was before, updated the back ups periodically according to a schedule).

  Thus, the system refers to the registry? I know the least about how to deal with this. I fall short, I don't know how to fix it. This may be the reason why now the backup that is in my book - not the software provided with the Passport, but microsoft backup hard drive - does not work?

  If so, how can we get the system adjusted? Or register if it is what it is.

  Thanks for everything very specific advice for someone who doesn't know much about the registry.

  I suggest avoid you the Windows backup program and you get a good commercial backup program. This forum meets for a windows problem reports. I know that I was very impressed when I tried it. Three I'm familiar with and like Norton Ghost (which I use for 8 years no 1 problem), Easeus Todo Backup free, you can download it from

  http://www.TODO-backup.com/products/home/free-backup-software.htm and Memeo , which has 30 day free trial and you can buy it for $29.99 - you can download it from http://memeo.com . You can get Ghost for almost nothing (like me), if you look at the sales.

  The March 2012 issue of PC World is very high on Easeus FREE program, and I was recently tested in a variety of configurations and must say that I am very impressed. As Ghost will support up to a network drive and it will create a bootable CD for when your PC does not start. See commentary to PC World to

  http://www.pcworld.com/downloads/file/fid, order 80031, 4/description.html .

  -

  CNET has a lot of reviews of backup program to

  http://download.cnet.com/windows/backup-software/?tag=contentBody;sideBar .

  Some of them are free (the last time I checked there over 300), some have free trials (more), and some are buying only (more than 200).

  -

  External hard drives are the best for backup. You can get a 500 GB one for $70 and a 1.5 to one for about $90. You can also buy a flash drive 16 GB for as little as $10. It is the best insurance you can buy ever!

  -

  I hope this helps. Good luck

• Lost in My Documents after the failure of the system files

  I have a (~ 6 years old), Dell Precision Workstation 360 serice XP Pro pack 3. This morning when I got up the screens show vertical bands of color. Given zero has nothing - not even the selection screen or function key boot options to enter the bios Setup. In brief - not even a partial boot - just (double) monitors show the vertical lines of color. Encryption on the motherboard could have found death I took the C: drive and plugged into one another computer (XP) via one box drive external usb. In windows Explorer I can see just about everything that I expect to see on the drive except in the My Documents folder. I don't know what should be there, but the only in My Documents is the music of my pictures of my user name and user name. The only items in these folders are the XP sample music files and images. I did a search on the entire disk for a couple of files that I know should be in My Documents, but nothing was found. Since then, I ran a virus scan using Norton Internet Security, but he found no virus. I've got some critical files on this disc I need today. Stupid me - had not saved them in a few weeks, so a lot of work is missing.

  Any assistance to resolve this would be greatly appreciated.

  Warren

  It seems that there are file system corruption, after the failure of your hardware. Try some recovery software data (links below) or, if data is critical and expense is not a problem, don't take any chances and send the drive to a professional drive savers data recovery company.

  R - Studio - http://www.r-tt.com/
  Recuva - http://www.piriform.com/recuva
  Restoration - http://www3.telus.net/mikebike/RESTORATION.html MS - MVP - Elephant Boy computers - Don ' t Panic!

• Failure of the system recovery: Windows installation error message

  System: HP Pavilion a6554f

  OS: Windows Vista

  I replaced a hard drive failed (replaced 1 TB 750G).  Used my system recovery disks.  Recovery system worked well.  After the recovery is complete, Windows began to install and finally comes up with the message: "installing Windows could not configure Windows to run on this computer hardware."

  Recovery tried again, same result.

  Any suggestions?  Diagnosis recognizes the processor, the memory, and drived hard (all past).

  My apologies.  Another thread has answered with the same problem I had.

  Here is the response copied from this thread...

  I used a builders or OEM copy because the owner could not find their burnt copy and HP is no longer a media available for this model.

  Below you will find an article I googled describing the error and the fix.  Simple.  Once, I changed RAID on AHCI, no problem.

   

  Here is the Solution!

  Here's how:
  　
  Option 1: (as Microsoft says, http://support.microsoft.com/kb/2466753/en-us)
  -Configure your BIOS, change the method to control RAID AHCI or IDE / ATA
  -Get your chipset AHCI drivers from intel and load them when the installation program asks you (onscreen that choose you where to install windows, there is a button labeled as 'Drivers')

  the url is http://www.vistax64.com/general-discussion/295950-help-windows-setup-could-not-configure-hardware.ht...

  Thanks to everyone who offers great help!

  Darryl

• Failure of the system standby

  I get the message: Watch system has failed: the "Microsoft.NET Framework v1.1.4322 Update" service prevents the computer from standby.  Try to stop the service, and then try again"how to stop the service?

  To stop a service, as long as user has administrator rights, make up the Services window:
  Start-> Run-> "services.msc".
  Then look in the list for "Microsoft .NET Framework... "whose status is"started. "  Then either click or double-click it and stop the process.

  HTH,
  JW

• failure of the system restore

  I have a dell Windows xp computer.  everything on it was working fine and the a few days ago the internet Explorer was working really slow but everything else on the computer was working fine.  so I did system restore to when it was working fine.  My computer has restarted and then BAM it nothing at all, but keep trying to reboot over and over again.  I don't like not really on the computer I was due for a new still, but I have pictures there that I want to come back and I was wondering if there was anyway at least to recover the photos.  Oh and I tried to start safe mode and all the options I got on the screen but the same thing. So if someone can tell me a way to recover these pictures, I would be very grateful.

  Hello

  The best way to recover the photos is to take out the hard drive and attach it to another PC as a slave drive, or second. Locate the drive connected, then copy your photos. The photos are usually found under X: \Documents and Settings\UserName\My Documents\My Pictures (where X is the drive letter of the hard drive attached andusername is your user profile.)

  Alternatively, you can try to make your PC work again trying to recover your registry database. You can read this document to do this: http://support.microsoft.com/kb/307545