Failure to create new virtual data center

Similar Questions

• Failed to create the gateway for virtual data center edge

  Hello

  I'm new to the vCD, when I tried to create a "bridge of edge" for the virtual data center, it failed, saying:

  Deployment of edge gateway PALEdgeGateway has failed.

  com.vmware.vcloud.fabric.nsm.error.VsmException: error response VSM (10105): could not publish configuration on vShield Edge. Has no power on VM vse-PALEdgeGateway (66b92dc1-c973-4744-8c0e-88e2d2211eae)-0. (No host is compatible with virtual machine).

  then I found this KB, suspecting that vShield that Manager is not synchronized with vCD:

  http://kb.vmware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 2060542

  I followed the steps in this KB resolution, but still did not work.

  Does anyone have an idea? Thank you very much!

  (We use vCloud Director 5.5.0 1323688, vSphere Client 5.5.0 1281650)

  Hi FredrickGu,

  Really sorry for the late reply. Our working hours doesn't seem to be the same.

  You are right that VShield Manager & POSSIBLE are the same. You will be able to deploy the Cluster edges & host view,

  Select a resource of data centers in the inventory tree, click the visualization of network tab and click the + to add edges. Ensure that we test the edge deployment against a successful VCD Host.If deployment works, it confirms the deployment of edge is certainly intact and communication POSSIBLE-host is very well.

• Virtual data center provider and Clusters of calculation ESXi

  I have 5 ESXi compute clusters, each with 10 ESXi servers in them.  Can I have more than one virtual data center provider for a single ESXi Compute Cluster?

  A links of virtual data center (pVDC) provider of a simple installation resources pool.  As many times as the list of resources is a list of resources of a ROOT cluster, but it doesn't have to be.

  You can extend your pVDC with "elastic pVDC" and the provider of a link to several resource pools (careful with this, you can not just move resources from one to the other to release one later)

• Failed to create new virtual machines on ESXi4.1 due to the error of slot

  Hi people,
  I am unable to create new virtual machines more on ESXi4.1 host due to the error of the slot. Its shows error "number of devices virtual exceeeds the maximum controller. In a cluster, we have 3 host ESXi 4.1.
  Each ESXi is IBM 3850 M2 / x 3950 M2, CPU Cores 24 CPUsx2.665 GHz.Processor Intel Xeon x 7460 @ 2 .66GHz CPU Type

  Please find the attached screenshot. Any help will be much appreciated.

  Thank you
  vmguys

  See http://kb.vmware.com/kb/1016221

• Create new virtual machine of the model that have two hard drives in the different data store

  We do VM deploy automation with PowerCLI.

  There is already a model created with at least two hard drives to one side and each hard drive belong to difference datastore,

  In the model's operating system is Windows server 2008 R2 already installed VMware Tools and other software in the second (other than C: driver) driver

  We can successfully deploy a new virtual machine with this manually with vSphere client model.

  But when we try to make the deployment with PowerCLI, can not find examples of similar scripts in the document of reference,

  and we also google this question, still no similar question was found.

  Is this possible with PowerCLI? If it's possible could you give me some advice or an example of script, thank you!

  Best regards.

  I already found the solution.

  With the vSphere SDK .NET API, we can create the new virtual machine to the model

  Mainly used API listed below, sorry because I can not give the source code here.

  • VMware.Vim.VirtualMachineCloneSpec
  • VMware.Vim.VirtualMachineRelocateSpec
  • VMware.Vim.ManagedObjectReference
  • VMware.Vim.VirtualMachineRelocateSpecDiskLocator
  • VMware.Vim.ManagedObjectReference
  • CloneVM_Task

  For reference, you can take a look at this post and this post

  LucD , thanks for your help!

• Failed to create new virtual machines on a new install of Vmware Server2

  We just got a new host, a HP DL980 G7, with hearts 62 x 2 GHz and 512 GB of ram.

  We installed RHEL 5.6 and ran yum update to make it current.

  Installation of Vmware Server 2 and open ports in firewall for 8222/902/8333.

  Created an account vmadm and pointed the VM directory here.

  IM able to connect to the infrastructure of the web and go through the motions of creating a new virtual machine.

  Infrastructure establishes a new directory and the files of the virtual machine.

  However, when I try to start the virtual machine, it just stops after a few seconds.

  I get the following information:

  Description:

  " Message from host: * error internal monitor VMware Server * vcpu - 0:Platform MPN check failed: mpn = 0xefff009Please report this problem by selecting the menu item help > VMware on the Web > request support, or by going to the Web page" http://VMware.com/info?ID=8 & logfile=/DB6/VMS/VM0/VMware%2elog & coreLocation=/DB6/VMS/VM0/VMware%2dcore%5B0%2D1%5D%2egz ". Please provide us with the log file (/ db6/VMs/VM0/vmware.log) and the core files (/ db6/VMs/VM0/vmware-core[0-1].gz). If the problem is reproducible, please set "Logging level" to "Debug" in the Panel of "Miscellaneous" settings of the Virtual Machine. Then reproduce the incident and submit it according to the instructions. To collect the data to submit to the VMware support, select help > topic and click 'collect support data. You can also run the script 'vm-support' in the folder my computer directly. We will respond on the basis of your entitlement to support. Thank you for your feedback-VMware Server team.

  I can't find anything on the server 2 and esx limits can be found here:

  http://www.VMware.com/PDF/vSphere4/R40/vsp_40_config_max.PDF

  I don't know what is your experience with this database, but from what I've seen performance problems of database in the virtual machines are usually caused by bad disk i/o. CPU or memory must not be the problem in a virtual machine.

• Creating new virtual machine from an another vm

  I installed VMware ESXi 3.5 and that you have created a virtual machine to Windows Server 2003. I would like to use this virtual machine as a model to create other virtual machines. How to create a new virtual machine from a virtual machine existing? What is the best practice? Thank you.

  stop the virtual machine in question, and "the clone to a template.  You can then deploy oversized.  Make sure you have all of the sysprep files that are located in the right place.

  You wan to watch this .pdf, even if a small wedge, it might be useful

  http://www.VMware.com/PDF/vc_2_templates_usage_best_practices_wp.PDF

  Keep in mind that in order to use the functionality of model or a clone, you must have a vCenter Server

  If you believe this or any othe response was useful please consider marking as "useful" or "correct".

• Virtual PC - create new virtual machine snap into button appears not

  I installed virtual PC and having the image in XP mode works on Win 7 64 bit on a Dell Optiplex 990 i5 processor.  However when I choose the Manager of Windows Virtual PC and the Windows Explorer window opens, I see not the option create a virtual machine, just 'burn' where it should be.

  I tried to activate windows 7 aero UI think the classic look of windows blocked somehow but that has no effect.

  I tried to reinstall the configuration of virtual machine directly on the site but it gives me the message that there is not suitable for use.  I tried uninstalled and re - install, but get the same when the Explorer window is missing the snap.

  How can I get the snap in option seem to create a virtual drive?  The window appears with the title of Virtual Machines.

  Once again, the image in XP mode work properly and starts and stops without any problem.

  Hi NSmith,

  It is better suited for the IT Pro TechNet public. Please post your question in theTechNet Support Forum. You can follow the link to your question:
  http://social.technet.Microsoft.com/forums/en/w7itprovirt/threads

  I hope it helps. If you have problems in the future, please let us know. We will be happy to help you.

• Failed to create new virtual machine

  Hi all

  I have a 5.1 ESXi cluster and I try to install a new Windows Server 2012 R2 virtual machine.

  The process always fails this question:

  "A component of the virtual machine is not accessible on the host computer."

  I tried to:

  • Change datastore (VMFS 3 and 5)
  • Change Vfolder
  • Change the amount of RAM and the number of CPUS
  • I tried disk as Thin provisioned or felt configuration.
  • Check the health of these two hosts: seems OK

  Nothing changes

  Any suggestion?

  Thank you

  Create and manage templates are based on vCenter server only and that's why you see not view 'Virtual Machines and templates' inventory... .and the VM files.

  Instead, you will see all your virtual machines from home-> inventory directly under your host...

  If I install a virtual machine in a host instead of using the Vcenter server, I don't see these files,

  What it means? you have successfully created VM via vSphere client connected to the host?

  So my question is: when the virtual machine is installed, and I reconnect using Vcenter where did I see this virtual machine? I guess that I'm not in the folders 'models and virtual computers '.

  You will see that it is not executed in the title of the last folder in the folder list or in the folder named "Discovered virtual machine"... until you insert it to some... by vCenter

• Error creating New flex data services project

  Hello
  Error: Invalid server root. Flex - config.XML or company flex - services.xml must exist in the WEB-INF/flex folder in the root of the server.
  
  Try to create flex project with Weblogic8.1 as the server j2ee services data, but am getting the error above in the screen where I point to the root of the server.
  I deploy flex on weblogic.
  
  I'd appreciate any help.
  Thank you
  
  Sun

  Hello

  The root of the server must be the parent of the WEB - INF folder. So, in your case, I think that the root server must be:

  C:\bea81SP5\user_projects\applications\dcgsaApplication\dcgsAdaptersWeb

  Give that a shot and let me know if it works.

  Thank you

  NJ
  Flex Builder team

• Help design an infrastructure of virtual data center for Dummies...

  Hi all:
  
  I don't know if this is the right forum to post this topic, if not my apologies. I need to make a logic
  design of my DC once it has been virtualized with VMWare vSphere, but I
  have no idea where to start. There are a tool that allows
  me for it to work automatically or any documentation on
  This? I'm planning diagram using Microsoft Visio, but I can't find the templates appropriate to develop
  the proposal of. Know no comments

  something like that?

  http://www.virtu-al.NET/2009/01/26/vdiagram-draw-your-VI-with-one-script/

  It is a little difficult to find the templates, but here is a good link

  http://technodrone.blogspot.com/2009/12/my-Visio-stencils-again.html

• Moving cluster in the new data center in virtual Center.

  Hi all

  I want to store my virtual Center layout. To do this, I want to move an existing cluster that exists on another physical site in a newly created in the virtual data center. When I try to move the existing cluster object, I get an error saying "the operation is not supported on the object.

  This does mean that I have to create a cluster and move the hosts one at a time, or is there a way to move the real cluster?

  Thanks in advance.

  You have to re-create the cluster indeed. Logout of the host, and then add the host to the new cluster.

  Duncan

  VMware communities user moderator

  -

• Virtual data centers how to a campus of double site?

  We begin to plan for a migration of vSphere 4.1 and 5.1.  We have two data centers several miles share a link 10 gig.  In our current setup, we have a virtual data center that includes the host esx on both sites.  VMotion and storage vmotion work well on the link 10 gig.  HA and DRS are not currently configured, but it will be included in the new configuration.  I'm looking for the advantages and disadvantages to continue having a virtual Datacenter, against two, one for each physical site that includes only the servers at this place, that is, buildling1-vdc, would include esx1 bldg1, bldg1-esx2, etc., and construction2-vdc, would include construction2-esx1, bldg2-esx2, etc.. We would be able to preserve the beaches of IPS to each site in the case of a link failure.    As I understand it, we would not power of vmotion or HA and DRS established between the two virtual data centers.  Other have a virtual infrastructure of several location connected by links broadband?  If you do, how much virtual datcenters you have and how they are configured?

  Please ask questions if you need more specific information to answer the question.

  a "Datacenter" vCenter object is a limit for the vMotion and distributed vSwitches. So, if you want to migrate virtual machines between the buildings / clusters these groups must be part of the object of data center. Also if you want to have similar networks on both sides and you want to use Distributed vSwitched then you will need to have both part of clusters of the same domain controller so that the VDS objects are pushed down.

• Assign a policy to a custom data center

  Hello

  I created a custom data center and added 3 groups that have "Custom strategy 1" that was. When I open the remaining capacity on the data center customized for the analysis screen, it is with vSphere Solutions default strategy. How can I assign the 'Custom 1 strategy' to the object custom data center so that it uses my buffers HA and approve the limits. When I navigate to the custom tree data center and select clusters, they use the "Custom correct strategy 1.

  I'm under vrops 6.1.0 3038038

  You must create a group for the custom data center and assign this group "Custom 1" or add the data to an existing group that you have your custom policy assigned to Center.

• can we do vMotion between two data center

  Dear team,

  Can we do vMotion between two data center (esxi5, x)

  Can we do SVMotion between two data center (esxi5, x)

  Note: it is not a physical data center, it is a virtual data center

  can we do vMotion between clusters (esxi5.x)

  can we do SVMotion between clusters (esxi5.x)

  concerning

  Mr. VMware

  Can we do vMotion between two data center (esxi5, x)

  NO, you can't.

  Can we do SVMotion between two data center (esxi5, x)

  Yes, as long as data warehouses are shared.

  can we do vMotion between clusters (esxi5.x)

  Yes, as they perform the same CPU families.

  can we do SVMotion between clusters (esxi5.x)

  Yes, as long as data warehouses are shared.