'Failure whereas windows' broken once my computer laptop-HELP!
OK, so about 6 months ago my laptop was set up windows - usually it just runs his thang and takes about half an hour. This time, I had to plug and wait 2 DAYS AND NIGHTS! Anyway, I turned it on and outside and he kept just configuration. This model lasted a few days, until eventually it just stopped working. Luckily it was in warranty, then they were able to fix it by installing a new hard drive
Back to present - it started at about 11:00 configuration and changed his mind at the 1 - ish to rather "failure of windows. His now 17:00. It says changes in his recovery, but the last time that this happened to my broken laptop. Is not under warranty, what do I do about it?
.
Amara
See
"Configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer"error when you try to install Windows updates.
http://support.Microsoft.com/kb/949358/en-us
Tags: Windows
Similar Questions
-
Blue "C0000142 dll initiallization failed" error message - windows vista on the computer laptop inspiron 1525 Dell. I tried all system tools and I get nothing and the only point of system restore in the restore SP1 update. not the best at the command line and even worse to system32 please help I need the laptop in return
Hello
1. when exactly you get this error message?
2 are you able to boot into the office after getting this error on blue screen?
3. don't you make changes to the computer until the problem occurred?
I suggest you to follow the steps below and check if it helps.
Method 1: Try to start your system in safe mode and check if the same problem occurs.
http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
Method 2 : If the question does not exist in Mode safe mode then try to put your computer in a clean boot state.
By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.
How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
http://support.Microsoft.com/kb/929135Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.
Method 3: If the problem persists, then try to run the Startup Repair tool.
Startup Repair is a Windows Vista recovery tool that can fix certain problems, such as system files missing or damaged that may prevent Windows from starting correctly. When you run the Startup Repair, it scans your computer for the problem and then tries to fix it so that your computer can start correctly.
Startup Repair: http://windows.microsoft.com/en-US/windows-vista/Startup-Repair-frequently-asked-questions
Hope this information is useful.
-
How to get windows 8 on a computer laptop, 15 "and 17" Pavilion
Hello
The stickers are from passes from my laptop, long having owned them for 6 months now.
From the beginning, in the property, I installed windows 7, however the windows 7 is not supported and I had a huge amount of support be troubled so try to go back to windows 8 now :-)
How to get windows 8 on my laptop when it came with win8 as the installation of the plant? Rights to a single unitary Win8 installation is included in the price of each correct laptop?
Thank you and best regards,
Dean
Hello @Karmatose,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.
I read your post on how you're looking to load Windows 8 on your laptop, and I'd be happy to help you in this case!
Let's all start, you will need to get the recovery disks to install Windows 8 for each computer. This can be acquired by following the steps described in this document about getting a HP recovery disks or USB HP recovery disc. Once you have the necessary discs, please follow this resource on a recovery of the system (Windows 8) HP running. This should help to install Windows 8 on both computers.
Please re-post with the results of your troubleshooting, and I look forward to your response!
Concerning
-
How can get the keys to windows vista for my computer laptop elitebook 8530w c
Hello
I bought a computer laptop elitebook 8530w sn 2CE94100GR with vista installed windows. the laptop has collapsed, and now I need the keys to re - install windows vista back. The windows sticker is not there. kindly advice. Thank you.
Hello
I bought a computer laptop elitebook 8530w sn 2CE94100GR with vista installed windows. the laptop has collapsed, and now I need the keys to re - install windows vista back. The windows sticker is not there. kindly advice. Thank you.
===================================================
For OEM support software... Check with your computer manufacturer. -
Unable to share files or printers between windows vista desktop and computer laptop windows 7
I'm trying to set up a home network, I have a windows vista desk top and AComputer laptop windows 7 I have already created a network servant but no machines recognize each other
Please see the advice contained in the sharing of files and printers with different versions of Windows and networking of computers running different Windows versions . Boulder computer Maven
Most Microsoft Valuable Professional -
my computer laptop wifi works with other modems. and my modem works with other laptops. they have one problem with each other.
I don't know why, please help me...Hello Omar.
Thank you for keeping us posted.
It seems that you did not try the method 2 and 3 after running the troubleshooter from network. Please, try it both ways and see if that solves the problem.
Reply with the results. We will be happy to help you.
-
computer won't let me install windows 7 on my computer! Help
try to download Windows 7 on my computer, it has not worked the 1st couple of times I tried to install it, now it says my access code is not valid, what do I do?
Skip entering your product key Windows 7 and complete the installation.
When you reach the desktop, click Start, right-click on computer
Click on properties
Scroll down to the Windows Activation
Click the link x days before activation.
Click on the link that says: "show me other ways to activate.
Enter the product key
Click next
Select the Activation of the phone
Click Next when you enter your key page
Select your country
Click Next, call the number listed
Be sure to explain your situation to the Appeals Officer.
Provide the installation generated when ID requested by the call agent
They give a confirmation ID in return, enter it
Click next to complete the activation.
However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.
15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.
So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.
or
How to activate Windows 7 manually (activate by phone)
1) click Start and in the search for box type: slui.exe 4
(2) press the ENTER"" key.
(3) select your "country" in the list.
(4) choose the option "activate phone".
(5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
(6) explain your problem clearly to the support person.
http://support.Microsoft.com/kb/950929/en-us -
Windows 7 32 bit computer laptop sony - unable to access programs and files
Before I had this problem. I myself remember having seen a balloon saying updates were installed and I had to reboot my computer. what I did. I can still access my desktop, but once I click on any program even the Start button it freezes. The mouse pointer still moves, but has the symbol circular treatment moving. The only way I can get out is to restart manually. Ctrl + alt + delete does not work. I tried to login in safe mode. Start button does not work but I was able to access some files on the desktop, but somehow something closed the file shortly after and brings back me to the desktop. at a point on the ordinary boot, a blue screen came up with the error message, but because he went too fast and restarted, it says something about error 0x000000F4. I don't know if it is a virus problem a hardware problem or windows is possibly corrupt. Pls. share your ideas about this.
BTW im using another laptop now.marphilyu,
For me, it sounds as if you can see the effects of a virus\malware infection. Take a look at these articles and see if they are able to help.Can I clean an already infected computer?
Mike - Engineer Support Microsoft Answers
Visit our Microsoft answers feedback Forum and let us know what you think. -
Windows 7 driver for computer laptop 15-e037cl from hp pavilion
Good day, please help me with a link to download the drivers for my new computer hp laptop 15-e037cl I just shot of windows 8 for windows 7. Any idea please? you will enjoy
Hello:
See if it works for you...
First, install the amd chipset driver and restart. You want the 49.7 MB file listed.
http://support.AMD.com/en-us/download/chipset?OS=Windows 7-64
Then is the graphics... install the beta amd catalyst driver and restart.
http://support.AMD.com/en-us/KB-articles/pages/latest-catalyst-Windows-Beta.aspx
Audio: Accept the agreement, download and install the driver for the second on the list.
Ethernet: Download and install the fourth driver on the list.
USB 3.0: Install both.
Card reader:
3D Driveguard:
Webcam:
In order to provide me with the wireless driver, proceed like this...
Go to Device Manager and click on the network controller needing drivers.
Then click on the Details tab at the top of the control of the network window.
Now, you see a drop-down list of property and it is set by default to the Description of the unit.
Drop down on it and select the second item in the list (Hardware ID).
After the first string of characters that start with PCI\VEN
-
Web camera does not, windows vista on a computer laptop toshiba a300 satellite
I was wondering if you might know how to solve my problem. Recently, I restarted my laptop and have had problems with the installation of Service Pack 2. However, he miraculously installed on the computer today and once rebooted after the installation of Service pack 2, it has now in an error box "the webcam driver open fail. "Please restart camera or computer.
I restarted the computer and there no resolver question and I can't open or find the webcam in my control panel and can not find if the driver has been corrupted or another. Any help would be greatly appreciated. Thanks a lot :)
Hi Zam,
I suggest you to follow the steps and check if it helps.
Method 1: Download the latest driver for your Webcam from the link and check if it helps.
http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp?service=EUMethod 2: You can also try uninstalling and reinstalling the drivers of Webcam and check if that helps.
(a) click Start, click run, type sysdm.cpl in the Open box, and then click OK.
(b) click on the Hardware tab.
(c) click the Device Manager button.
(d) search of Webcam.
(e) right click on the webcam, and then click Uninstall to remove.
(f) restart the computer, and then reinstall the driver for the webcam. -
Re-install Windows in the same computer laptop but different mainboard
Hello
I have a laptop with Vista Home Premium 64-bit. There are several butterflies I changed it was a genuine Windows Vista Business 32-bit. Recently, I have a problem with my laptop and the manufacturer said that it needs a motherboard replacement, so now the laptop is still be fixed. My question is, can I re - install my laptop using the same Windows Vista Business 32 bit DVD I already had? If not, is there something I could do in order to install using the same DVD again?
I asked about this on the Volume License Service Center (* address email is removed from the privacy *), but the representative (Jenny) told me to request technical assistance. The ticket/problem code isSRX1132703102ID.
I hope I could get a response on this matter.
Thank you
Aswin
Yes, you can use the same copy of the retail of the 32-bit Vista Setup disk you used - the only problem is that it can be installed on a single computer at a time.
You can have trouble activating due to the new motherboard, so do it manually.
To activate manually, go to start, search, and type in slui 4 enter. Enter your country and press Next. You will be on a screen with a phone number and a bunch of codes below. Dial the number and browse automatic guests until you get to a human being. Have your handy product code because it will be asked. Explain the situation, but it's the same PC and only installed on this PC. They should give you a code to enter on this screen to activate Vista.
I hope this helps.
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
Dell Inspiron N5010, windows 7-64 bit preinstalled when you purchase. one of the first free updates for windows 10 in July. recently replaced (fatal) of hard drive and reinstalled windows 10. I'm trying to get an ISO of windows 7. This has proved to be quite difficult. my attempt to replace my hard drive using the old product key failed because the site does not accept the keys to the pre-installed versions. If I understand it well in an article I read it says that when I upgraded to win 7 to win 10 product key remained the same. However, when my hard drive has been replaced and windows re-installed 10 this product key has been replaced with a digital license. I have 3, possibly 4 questions: 1) has my product key now a digital license? 2.) If Yes, this digital license can be used for windows 7 ISO? If Yes, where can I find the digital license? (4.) If none of the above, any suggestions how I can get a copy of windows 7 Iso? I am very frustrated and ideas.
Thanks VeeW
When you upgraded from a previous version of Windows or get a new PC preinstalled with Windows 10, what has happened is that the hardware (your PC) will get a digital right, a unique signature of the computer which is stored on the Microsoft Activation servers. The real Windows 7 or Windows 8 license you were using previously will be exchanged with a key to the diagnosis.
Whenever you need to reinstall Windows 10 on this machine, go just to reinstall Windows 10. It automatically reactivates.
Therefore, there is no need to know or get a product key, if you must reinstall Windows 10, you can use your Windows 7 or Windows 8 product key or use the reset function in Windows 10.
If you are prompted to enter a product key, click on "I don't have a key" and "do it later".
Even when you switch to Windows 10, you can return to Windows 7 at any time. Get Windows 7 reinstall media will be dependent on certain factors.
1: you may contact Dell to recovery media:
http://support.Dell.com/support/topics/global.aspx/support/DellCare/en/backupcd_form?c=us&l=en&s=Gen
1-800-624-9896
2: Download and create a bootable, then reinstall using the product key on the COA certificate:
Microsoft Windows and Office ISO download tool - HeiDoc.net
then
-
I recently bought a HP Probook and connected the laptop to an old but very faithful computer HP Laserjet 5 p. The HP Probook uses a Windows 7 64-bit operating system. The printer is connected to one of the USB ports on the laptop.
Printing worked fine until yesterday. To my knowledge, no update of the operating system took place. I tried change usb port, remove and reinstall the driver package, start and stop of the spool printing, deleting the temporary files in spool it print without result. When I click on print a Test Page, it seems to go to the printer, but is located in the coil. I also ran Print Microsoft FixIt which can't find any problem apart from the removal of the queue.
To check the cable, I plugged the printer on an old Vista HP Pavilion laptop and no problem printing.
I'm at a loss what to try next and would therefore appreciate all thoughts.
Thank you.
How have you tried to uninstall the printer?
Here are some ways you can do it.
1. go to the Start Menu
2. all programs
3 file HP
4. choose the name of the printer
5 down to uninstall.
Another way to check if it is deleted.
1. click on Start Menu
2. type in the Device Manager in the search bar
3. in devices, look under the tabs, IMAGE Manager and DEVICES, PRINTERS and another tab that could involve the printer.
4. If he's there, RIGHT CLICK and uninstall.
-
Activation of Windows on the new computer laptop
I bought the Windows 7 Home Premium Family Pack (3 licenses). I installed it on 2 PC and a laptop computer. I replaced since my laptop and tried to install Windows to the new. It will not be activated and will only allow me the option to call an automated system which provides for no alternative but to tell me that it is impossible to activate. How can I talk to someone to fix this. I don't want to buy another license when I have already paid for 3 and only have 2 now in use.
How to activate Windows 7 manually (activate by phone)
1) click Start and in the search for box type: slui.exe 4
(2) press the ENTER"" key.
(3) select your "country" in the list.
(4) choose the option "activate phone".
5) stay on the phone (do not meet all the automatic guests) and wait for a person to help you with the activation.
(6) clearly explain your question to the support person
-
Windows 7 driver for computer laptop hp pavilion dv6733tx/entertainment
Hi, my laptop is HP Pavilion dv6733tx Entertainment Notebook,
ORI windows is vista. but now I change windows 7 64 bit ultimate.
but hp wep did ' t having win 7 driver. can I use driver vista backward as below?
Hello Ivenkok,
I understand that you have changed your operating system to windows 7 from vista, and you are not able to locate the drivers on the HP site.
The drivers you are looking at are specifically for windows vista not for 7 so these drivers would not work for this laptop.
One thing you might try download this HP Support Assistant program, and it will try to search for and find drivers and compatible software for your laptop. Click on this link and will need you the HP Support Assistant page.
I would like to know if it is useful.
Thank you
Maybe you are looking for
-
How can I connect application iPhoto for my email accounts to send downloaded photos?
-
How to sync 3-way with USB-6251
Hi all I have a NI USB 6251, Labview8.5. My system includes: + a waveform output stimulating (I use Dev1/AO1 or Dev1 / AO0) + Two channels for (I use Dev1/ai0 and Dev1/ai1) acquisition of input signals. I modified example "Multi-multifunction-Synch I
-
When an UPDATE in Windows Update History, BY what CANCELLED shows can still bring it and install it? I have vista ultimate x 64.
-
Computer turns on automatically at midnight
Every night, I turned off my computer. BUT at midnight, it turns on automatically and stays on all night, energy loss. Why he did this, and how to disable this function "auto power OFF"? Thanks to anyone who can help!
-
"Back" button (Menu, info, etc.) does not work.
Thanks for any assitance adavance! During the filming of today, the back function buttons (read, menu, info, delete, etc.) and the touchscreen on the rebel T5i has stopped working. I turned the camera on and out, replaced the battery and card SD and