Falsh USB key does not work,

Similar Questions

• Pny 4 GB USB key does not work on my new computer?

  PNY 4 GB USB attached flip key will not work on anything ive tried including the update of drivers on each computer for that material and all the drivers?

  Unfortunately this did not help, the USB is not but the age a year but already had important things, Ive already lost the last 6 months b/c my new windows 7 was a pilot missing and with my boot cd "s out of State, I had to restore to be online for school»

  Unfortunately - when one of these drives (USB thumb drives) goes to the South, more often - it is always toast.  There is no real help to recover the data: that is why everything should be saved.

  You said you tried it on several computers (... on all computers...) so it's probably a Goner.

• The internal keyboard BACKSPACE key does not work

  I have a laptop Toshiba Satellite and the BACKSPACE key does not work.

  He will start work the rare opportunity, but then it just stops working again.
  This happens on everything, including word and internet ect.

  It has been like that for a few weeks now and I turned the laptop and turn off many times.
  Is there a way to fix it myself or I send for repair?

  Please, * don't * tell me:
  Get an external keyboard
  Try it turn on and off
  Just highlight the words and use the delete key - it's annoying to have to do this all the time
  Type carefully and do not make so many mistakes

  Thank you!

  > Please, don't tell me not to:
  > Get an external keyboard

  And why shouldn't t someone recommends you to check the functionality using the external keyboard?

  It s recommended to connect an external keyboard to verify how the BACKSPACE key would work using 2nd external keyboard. In case the back might work properly using USB keyboard, the question is very clear; in such cases its main shortcomings. The key cannot be replaced or changed or fixed. In this case, need to replace the entire keyboard!

  In case the BACKSPACE key does not even using the external keyboard, then this would mean that the internal keyboard controller is faulty and in this case only the replacement motherboard would be useful.

  But to be honest, I think that its simple keyboard failure and a replacement would solve this.

• Satellite C660 - the SHIFT key does not work

  Hello

  I have a problem with a Satellite C660.
  The keyboard, I cannot use the SHIFT key. After you have installed windows everything worked properly, the problem recurs after a few days. Practically the SHIFT key does not work.
  On the one hand I'm the A and the other side works like ESC.

  Help me I'm crazy.
  Thank you.

  Hello

  To me that sounds more like a keyboard failure, I can't imagine that it could be linked to the question of the windows operating system do you have tested an external USB keyboard.

  Please test this. In this case, you can check if it s really a software problem.
  If the USB keyboard works correctly, it means that your internal keyboard is malfunctioning.

• Satellite L650 - 12N USB Ports does not work

  My satellite L650-12N usb port does not work. I did everything that I could and it does not work.
  It shows a yellow exclamation mark on my system.

  I try so many ways, including the recovering auto troubleshooting, formatting and system he could not work.
  Under the key USB gives error code 43, I do not understand.

  The webcam and the wireless card no more.
  This boot problem after a storm in my area some time ago.

  Please can someone help.
  Thank you
  Sani

  Hello

  > This problem start after a storm in my area some time ago.

  Because other devices don't work properly and because procedure didn t get it back help you solve this problem, I think that the problem is related to the hardware malfunction possibly that the motherboard was hit by lightning, which would explain the problems

  I think you should ask the maintainer authorized Toshiba in your country to check the motherboard.

  But in my opinion, that the warranty does not cover the issues of environmental impact maybe your household insurance could help you

• Portege Z830 - X 11 - enter key does not work on the logon screen

  suddenly, the Enter key does not work in the scrreen of connection (win 7 64 bit, toshiba portege Z830 - X 11), which some do not login with password.

  The on-screen keyboard sends the "enter" or the other.
  When in safe mode, everything works as it should.

  I solved this problem by disabling the password for the account, but I don't feel well in this situation.

  Help, please...

  Have you tried an external USB keyboard?
  Do this!

  Not very well why the ENTER key does not work on the login page, but I guess its problem of keyboard.

• Satelite P50-A-14F - Caps Lock key does not work

  Hi all

  My CAPS LOCK key does not work on my laptop series satellite P50-A-14F. Just realized while writing an email that does not work, so is more or less sudden. Nothing has been spilled on it. Here's what I've checked so far:

  -green light indicating that CAPS is LOCKED turn everything on by pressing the key on the keyboard of the screen
  -Keyboard backlight does not start when I press the button, but it works for the key itself when you press a button any.
  -try a clean boot but no results.

  Thanks a lot for your help.

  Hello

  > Just realized while writing an email that does not work, so is more or less sudden.

  Have you tested the button LOCKING of upper CASE using different software: Web browser, by word or any other editor?
  How about using the external keyboard?

  From my point of view, there are two possible malfunctions: either there is a problem with the software that you use or the internal keyboard works badly simply and in this case, the replacement of keyboard will solve the problem.

  You could test the external USB keyboard. In case the button LOCKING of UPPER USB external keyboard functions, then the internal keyboard needs to be replaced for sure.

• Recover Windows 7 family premium but license key does not work

  Hello

  My HD crashed on my laptop HP, so I got a new one and managed with the help of a friend to get Windows 7 Home premium installed again, but provided with my HP laptop product key does not work, how is it?

  Thanks for any help

  / Jan

  When you request support, please provide the model name and product number complete (p/n) of the HP computer in question. HP/Compaq made thousands of computer models. Without this information, it can be difficult, even impossible to help you solve your problem.

  The information requested above are on the bottom of your computer, inside the battery compartment or on the BIOS boot screen. Please see How can I find my model number or product number? for help more to find this information. DO NOT include your serial number. Please enter the product/model information consumer HP Online Support page and post it here for our review.

  

  Please use the support of HP recovery, you created when you first you computer Configuration. If you don't create this media, please contact the official support HP customer in your region / country, via the Portal Support HP's worldwide, to see if the HP recovery support is available for your computer.

  If you found "recovered" or the Windows product key from the old hard drive, it will not work. The key to the used factory also requires a SLP/SLIC 2.1 BIOS and an appropriate OEM SLP/SLIC certificate.

  Alternatively, if you can still read the 25 characters on the COA affixed Microsoft Windows product key at the bottom of the computer, you can install Windows 7 Home Basic by using this key. Please see "how to install Windows 7 without the disc" to get instructions on how to download Windows 7, create the installation media and install Windows 7 using the product key 25 character of the COA Microsoft on your computer. Please note that this facility is not all customizations of HP or HP value-added that was original installed on your computer. Also note that you will need to download and install most of the drivers from the HP support for your computer page.

  Windows 7 SP1 can be found HERE and HERE.

  Direct link to Windows 7 USB/DVD Download tool. Use this tool to create a bootable DVD or USB Flash drive from windows. ISO

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• USB keys do not work in my VISTA PC, but working in the XP computer.

  My PC is only a few months and underwarranty. VISTA is OEM original and authentic. All updates and installed SP2.

  But I have several problems with VISTA.

  One of them is the following:-

  USB keys do not work in this PC. Initially, they are recognized, but as soon as I start the data transfer it stops and does not recognize the keys more. Same USB keys work correctly on other XP computers.

  An external hard drive works perfectly on the same USB port. If the port is fine.

  Hello PG_eu,

  First of all if still under warranty, contact the manufacturer to execute tests for your USB slots. Have you tried to see if other devices work on the USB plug? The manufacturer of your may be able to replace your computer if needed.

  Then, I'd go for the Device Manager to see if you have errors. Go to Device Manager and see if you have a yellow fringe! showing that there are errors with your USB devices. Open the Device Manager in Windows Vista via the management utility of the computer, the Control Panel, or from the command prompt by typing in devmgmt.msc.

  You can go to the different tabs and see if the devices work properly, should be cancelled or update your drivers.
  You can also go into the event viewer and see if you have errors on your hardware devices.

  I hope this helps.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Pavilion P6-2133: Product key does not work?

  I tried to update my system Windows 10 the past two days, and the downloads completely update but fails to install.

  I tried to download the Microsoft Media creation tool and created a USB bootable for upgrad go, but this requires a product key. When I enter the product key on the side of my Tower, that he told me that this key does not work.

  No idea why my product key appears to be invalid and what I can do about it? I plug this new system and I am the sole owner, and its the same running a copy of Windows 7 that is come preinstalled the day I bought it.

  I finally solved the problem by using the iso instead of the USB. I downloaded the iso on my D drive and mounted with Daemon tools and launched the installer from there, he had my key loan but he never asked a.

  I had to use the same method on my tablet, but it was 8.1 that has the ability to mount an iso natively, so I put the iso on my SD card and it mounted from there. However, 8 + pcs generally have the key integrated on the motherboard.

  I was using the latest version of the multimedia tool, but no matter what he asked for a key.

• My backspace key does not work!

  My backspace key does not work and sound really make my crazy! I wrote a story the other day and I made a mistake and I couldn't use the return back cuz' it wouldn't work! can you tell me how I can fix my backspace key?

  ~ Maya H.

  Hello

  Try the keyboard on another computer to see all the works.

  If a laptop, try a USB keyboard to see if it is a hardware problem or software.

  See you soon.

• Ethernet USB adapter does not work after update to sierra mac

  Ethernet USB adapter does not work after update to mac sierra.

  Please solve this problem as soon as POSSIBLE

  Hello guatamshah,

  If your USB to ethernet adapter does not work now that you have upgraded to Mac OS Sierra, there are a number of things we can try to get it working again.

  The first thing we want to do is to reset the SMC and the NVRAM on your Mac.
  Reset the management system (SCM) controller on your Mac.

  https://support.Apple.com/en-us/HT201295

  How to reset the NVRAM on your Mac.
  https://support.Apple.com/en-us/HT204063

  If the adapter is not still work after only two resets check to see if your Mac recognizes the device properly in the information system. In the Apple Menu, choose about this Mac, and then click the button 'system report... '. ». Once you have the window open system information, see the USB category on the left.
  OS X: about system information and System Profiler

  https://support.Apple.com/en-us/HT203001

  If she does not appear in the information system, see the articles below.
  macOS Sierra: If a USB device does not work

  https://support.Apple.com/kb/PH25343

  macOS Sierra: check your device's USB connection

  https://support.Apple.com/kb/PH25567

  However, if you do not see the device in system information, you may need to verify that network service appears correctly. In the Apple menu, choose system then Network preferences. You should see an entry similar to "Ethernet" on the left. If no, see the steps in the article below to add. Once add, test to see if your connection works with a disabled Wi - Fi connection.

  macOS Sierra: Add a network service
  https://support.Apple.com/kb/PH25279

  If it does not appear in the network, please let us know what you see on the right when you select the service, and the name of the service as it appears and we can go from there!

  Kind regards.

• USB ethernet does not work after update to Mac OS sierra

  Hello

  I use end of 2014 Macbook pro 15 "running Mac OS Sierra.

  Before the update for sierra, Captain, EL on OS USB ethernet has been working well, but after that the update for Sierra USB ethernet does not work, "showing the cable disconnected.

  Please advise and thanks in advance.

  Do you use the Thunderbolt Apple > Ethernet card?

  -Try to reset memory NVRAM/PRAM and SMC

  MacIntel: Reset of the controller (SMC) system management

  https://support.Apple.com/en-us/HT201295

  Subject of memory NVRAM and PRAM

  https://support.Apple.com/en-us/HT204063

  -Try to start safe mode

  OS x: what is Safe Boot, Safe Mode?

  https://support.Apple.com/en-us/HT201262

  -Start to recovery and repair the startup disk

  OS X: on OS X Recovery - Apple Support

  https://support.Apple.com/en-us/HT201314

  The adapter works in recovery mode?

  This is the Office Mac Pro forum. I asked that your post moved to the forum of laptop MacBook Pro or another appropriate forum.

• NB200-12N - USB port does not work

  Hello

  I updgrade my OS from windows 7 starter edition to now a windows 7 home basic 32-bit usb port does not work is the (only) in the left near card reader sd and lan.
  Can you please hellp me to install it? I have download the drivers from Toshiba for my NB200
  But does not work.

  Thank you

  Paulo

  If everything is OK and right drivers all USB ports should work. You cannot install the drivers for each port separately and force one of them to work properly. On this machine, all three ports are the same USB2.0 ports.

  Try reinstalling the chipset utility.

  By the way: two other ports work well, right?

• Qosmio F60 - Fn key does not work

  Hi all

  My FN key does not work.
  reinstalling the driver as PVAT have no effect...

  Thanks for your help.

  JM

  Hey Buddy,

  Have you reinstalled as Flash Cards Support utility? The FN keys to both tool and value added package.

  Again, you should check the site Web of Toshiba Flash Cards Support utility:
  http://EU.computers.Toshiba-Europe.com > support & downloads

  So uninstall old utility Support Flash Cards and then install the latest version of it.

  Check this box!