Family Vista premium must reinstall.

Similar Questions

• my computer has a virus. I took it to get the virus removed and now I don't have my family vista premium there Home Basic

  my computer has a bad virus and I had cleaned it but now my family vista premium is not on that but Home Basic is. I tried to activate with the numbers on the side of my computer, but he says that's not good. His NY will not come on either. I went to the trouble and he told me to plug my speakers that have been connected

  Hello

  Take it back to the one who fixed it and demand that they fix it correctly by reinstalling correct Vista edition. namely Vista Home Premium;

  _____________________________________________________

  We cannot help you help to activate the version of vista evil with your home premium product key

  It will not work

  _______________________________________________________

  If you have no luck with the one who fixed it, you need to reinstall vista Home premium yourself or contact a computer technician known to do

  Here are the different ways to reinstall Vista

  Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  ____________________________________________________________

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  __________________________________________________________

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  ____________________________________________________________

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• Does family vista premium have fax capabilities? If this is not the case, can it be acquired?

  Original title: Edition Vista Home premium

  Does family vista premium have fax capabilities? If this is not the case, can it be acquired?

  Hello

  Home editions of Vista have not included Fax software.

  Fax only comes with Vista business, full and firm.

  http://Windows.Microsoft.com/is-is/Windows-Vista/send-a-fax

  It is a salary for a Fax program.

  http://www.SnapFiles.com/get/snappyfax.html

  See you soon.

• cannot burn two readers do not recognize the blank cdr - family vista premium

  cannot burn the two deives do not recognize Virgin cdr - family vista premium

  Your CD or DVD drive cannot read or write media - Fix It:
  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

• Windows family vista premium 64-bit fails to install net framework 3.5 sp1 error code 1603

  I tried several times to install this update for net framework and have had no success at all. I searched for an answer and also failed with that as well. I thought that I have that would give a shot. It's probably something very simple, but you know how it goes with computers. I'll paste the log of the try to install net framework 3.5 sp1 below:

  [03/18/09, 02:06:23] Microsoft .NET Framework 3.5 (x 64) 'package': [2] error: Installation for the Microsoft .NET Framework 3.5 component failure (x 64) 'package '. MSI, returned the 1603 error code
  [03/18/09, 02:06:26] WapUI: DepCheck [2] indicates Microsoft .NET Framework 3.5 'package' (x 64) is not installed.
  [03/18/09, 02:21:03] Microsoft .NET Framework 3.5 (x 64) 'package': [2] error: Installation for the Microsoft .NET Framework 3.5 component failure (x 64) 'package '. MSI, returned the 1603 error code
  [03/18/09, 02:21:06] WapUI: DepCheck [2] indicates Microsoft .NET Framework 3.5 'package' (x 64) is not installed.
  [03/18/09, 16:30:20] Microsoft .NET Framework 3.5 (x 64) 'package': [2] error: Installation for the Microsoft .NET Framework 3.5 component failure (x 64) 'package '. MSI, returned the 1603 error code
  [03/18/09, 16:30:23] WapUI: DepCheck [2] indicates Microsoft .NET Framework 3.5 'package' (x 64) is not installed.
  [19/03/09, 13: 32:50] Microsoft .NET Framework 3.5 (x 64) 'package': [2] error: Installation for the Microsoft .NET Framework 3.5 component failure (x 64) 'package '. MSI, returned the 1603 error code
  [19/03/09, 13: 32:56] WapUI: DepCheck [2] indicates Microsoft .NET Framework 3.5 'package' (x 64) is not installed.
  [19/03/09, 14:32:11] Microsoft .NET Framework 3.5 (x 64) 'package': [2] error: Installation for the Microsoft .NET Framework 3.5 component failure (x 64) 'package '. MSI, returned the 1603 error code
  [19/03/09, 14: 32:14] WapUI: DepCheck [2] indicates Microsoft .NET Framework 3.5 'package' (x 64) is not installed.

  That's what the Setup log gives me after that windows is unable to install net framework 3.5 sp1. I sure would appreciate it if someone could help me solve this problem. I just bought this pc about 2 months ago and it's the first question that I lived with her. Thank you

  To successfully install the update, uninstall all versions of the .NET Framework on the computer, and then reinstall all the versions of the .NET Framework on the computer. You may need to work through more than one of the following methods.

  Method 1: Manually remove and reinstall .NET Framework

  To remove and reinstall .NET Framework manually, follow these steps:

  1. remove the .NET Framework.

  a. Click Start and then click Control Panel.

  b. double-click Add or remove programs.

  c. Note each version of the .NET Framework is already installed on the computer. Then, uninstall all versions of the .NET Framework.

  d. When you are prompted, restart the computer.

  2. use the Windows Installer CleanUp utility to clean up the State of MSI database for all versions of the .NET Framework.

  .      Download the Windows Installer CleanUp utility. The following file is available for download from the Microsoft Download Center: http://download.microsoft.com/download/e/9/d/e9d80355-7ab4-45b8-80e8-983a48d5e1bd/msicuu2.exe

  a. install the Windows Installer CleanUp utility as an administrator or a user account that is a member of the local Administrators group.

  b. Click Start, point to all programs and then click Windows Installer Cleanup.

  (c) in the Windows Installer CleanUp utility, remove all Windows Installer for the .NET Framework applications.

  3. restart the computer.

  4. download and reinstall all the versions of the .NET Framework that were previously installed on the computer.
  To download .NET Framework 3.5, visit the following Microsoft Web site:

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=333325FD-AE52-4e35-B531-508D977D32A6&displaylang=en (5. When you are prompted, restart the computer.

  Note When you have reinstalled all the versions of the .NET Framework, you can use Windows Update to check for the updates of the .NET Framework.

  Method 2: Use the .NET Framework automatic cleanup tool

  This tool is not designed as a substitute for the standard uninstall procedure. You should try to perform an uninstall by following the steps in method 1, earlier in this article, before using this cleanup tool.

  The .NET Framework cleanup tool removes the .NET Framework for you. For more information about how to obtain and use this tool, visit the following MSDN Web site:

  http://blogs.msdn.com/astebner/archive/2006/05/30/611355.aspx

  Note that this cleanup tool deletes shared files and the registry keys that are used by several versions of the .NET Framework. To ensure that all versions of the .NET Framework work correctly, if you run the cleanup tool to remove the .NET Framework, you must first remove all installed versions of the .NET Framework using this cleanup tool. Then, you must reinstall all previously installed versions, starting with the version number the lowest.

  Suppose you have the .NET Framework 1.1 and .NET Framework 2.0 installed on your computer, and you plan to use this cleanup tool. In this scenario, you use the cleanup tool to remove the .NET Framework 1.1 first and then use the cleanup tool to remove the .NET Framework 2.0. After you remove the two versions, you reinstall .NET Framework 1.1 and then install the .NET Framework 2.0, in that order.

  The third-party products that this article discusses are manufactured by companies that are independent of Microsoft. Microsoft makes no warranty, implied or otherwise, regarding the performance or reliability of these products.

• Family Vista premium reinstall problems

  OK, 5 days of problems here... too many too list at this point, but... went to the pc bed was thin got up sat down and started with vista does not and computer constantly stopping finally got it to load and run all the scans without problems or viruses detected, next day vista don't would not charge to new pc still closing left and right check connections unplugged all unnecessary elements reinstalled all cards, etc.

  support and follow-up all boards of technicians using full recovery plant which kept computer stops trying to get its operation I was able to do work it does not solve the problem and then F8 not working so could not try again.

  I used the installation of vista comes with the computer cd and tried hundreds of times to do the Startup Repair and clean install... on the new facility, he keeps close to the section lines in expansion. I thought at that time I had nothing to lose so I tried the format on the c partition hoping the installation would then work, always shut down... kept trying

  Unfortunately I'm persistent and want to get the pc running again, and then on an attempt to format and install I accidentally did the wrong partition and lost the recovery partition.

  I still can't get vista install... any ideas would help at this point because I am on disability and can't afford to buy a cd of vista or a new pc and using my pc's all what I can do to occupy my time.  Thanks in advance for any help on this disaster

  "support and followed all the advice of technicians using a full factory recovery".

  "I used the cd of installation of vista came with the computer.

  For ANY questions/problems regarding the software/recovery process, contact the manufacturer of your computer.

  It is their software/recovery process, not Microsoft.

  See you soon. Mick Murphy - Microsoft partner

• I lost my x 86 programs after reinstall family vista premium and windows 7 Upgrade on another, both are hp pavilloin, is it possible to recover them.

  I have 2 HP pavillion desktop that I lost the x 86 full programs files systems, 1 is a vista I had to reinstall using a set of discs purchased from HP, the other flag I did an upgrade from vista to windows 7. Both are 32-bit operating systems. It's very strange that the x 86 systems wet program files missing. Can someone tell me why this happened and how to get the x 86 systems back. I did the repair restoration and even did a complete reinstall with a new hard drive on windows 7. All programs go into 1 file and will work properly from there.

  Thank you, pop

  You are welcome.

  I'm happy to have helped.

• menu contextual Family Vista premium doesn't show 'open with '.

  I had to replace my hard drive and now the context menu in vista family premium doesn't show 'open with' how can I add it then I choose a program?

  I had to replace my hard drive and now the context menu in vista family premium doesn't show 'open with' how can I add it then I choose a program?

  This tutorial allows you to add open with in your context menu:

  http://www.SevenForums.com/tutorials/52833-open-context-menu-item-Add-Remove.html

  The tutorial applies to both Windows 7 and Vista.

• license for windows family vista premium 64-bit, but need to copy

  I have the license for windows vista Home premium 64-bit.  I had to replace the motherboard in my pc.
  so I had to reinstall windows, but only had a copy of windows xp from an old computer.
  what I have to buy a new copy of windows vista?

  Hello

  If vista is preinstalled, motherboards change should be done in conjunction with the manufcacturer of the computer

  preinstalled OEM licenses are tired to the original material on which they are installed

  the license dies when the computer dies

  If a retail license, you can change morherboards

  borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• Family Vista premium in french I would like to change it to English

  I have a vista home premium in french, I would change it to what is to do, the most economical way to upgrade to windows 7?

  Hello

  You can change the language only in vista ultimate and enterprise

  as you have vista Home premium, you will need to upgrade to vista ultimate

  the upgrade must be done in the original language, in your case french, then download the required language pack

  for windows 7 questions repost in Forum windows 7 the link below

  http://answers.Microsoft.com/en-us/Windows/default.aspx#tab=2

• Last screen family vista premium causes the update of death blue

  I am currently under the 64-bit version of vista Home premium, SP 1.  It has worked wonderfully for the sixth month, until yesterday.  The automatic update downloaded 3 updates, I installed before stopping.  After rebooting, my computer allowed me to open a session, but windows was loading blue screen of death out and forced a restart.  This continued in a cycle until the System Restore tool kicks and restore an earlier version which as far as I know just deleted updates and now everything works fine.  Unfortunately, I wasn't able to write the error code, but I wonder if there are known incompatibilities in software in the updates.  Also, should I continue to update?

  Thank you

  The solution is in this thread:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/c619f139-00e3-4492-8972-1ea8dc3b13a9 If you find my answer was what you're looking for, remember to click on the box "mark as answer" below!

• Family Vista premium 32 - backup on DVD does not work

  I use Vista Home Premium 32. I can do a backup with my WD external drive but I can't do a backup with DVD + R. Disc 4.7 GB 2 h 16.  Describe step by step. Start, Control Panel, back towards the top and the center of restoration, backup files [backup], disk permissions to continue Virgin format location, DVD RW Drive (d), backup, a snapshot is created, analysis backup files, an error cannot find file (0 x 80070002). I tried troubleshooting microphone fix - it Center DVD and I got an erroe 80040154 code. Thank you, Herb

  Hello

  Please follow the steps mentioned in the article and check if you are able to run back to the top

  0x8100002F error code and or error code 0 x 80070002 when you back up files.

  http://support.Microsoft.com/kb/979281

  Also check this link for more information and troubleshooting.

  http://blogs.technet.com/b/filecab/archive/2008/03/12/common-causes-and-solutions-to-backup-system-restore-and-complete-PC-backup-problems-updated.aspx

  Please try to run the fix it once again by re download a new copy and check if al else fails.

  You can also use the below mentioned link to validate solutions in the Microsoft Fix it Center.

  http://social.Microsoft.com/forums/en-us/fixitcenter

  Hope this helps

• in family vista premium I get the application message has requested to stop in an unusual way (this when I try to access the windows messages)

  In Vista hom premium when I try to access the windows messages I get the message "the application has requested runtime to stop completely in an unusual way, contact the applications support team"

  Try to compact and repair the database of WinMail (see www.oehelp.com/WMUtil/).  Also check for interference from antivirus software (see www.oehelp.com/OETips.aspx#3).

  Steve

• How can I get the windows family vista premium 64 - bit os supplied with the PC I bought?

  I bought a gateway pc core quad 9750 in October 10,2009.  He cane with operating system windows vista Home premium 64-bit.  So how do I get a copy of my software?  I bought it with the pc.  my pc crashed and I lost my operating system...  Kinetics pc in my hometown has changed my OS to windows xp professional.  now my dvd writer do not work because it isn't 64-bit 32 so I need my Windows vista Home premium to be able to work wo my pc correctly

  Look here http://support.microsoft.com/kb/326246/en-us

  Try contacting the manufacturer of pc, they can provide you with a replacement CD at low cost.

• change pre-installed Windows vista home edition premium 32-bit family vista premium 64-bit, how can I go about it?

  I have a hp a6242n with vista home premium 32-bit installed and I need the 64-bit version while I can add little ram, I can only drive versions or should I just buy a new copy?

  Hello

  You can buy a disc of 64 bit vista with license of full version of somewhere

  Try your local computer repair shop

  then perform a new installation of it who will clean up the hard drive clean during the process

  Microsoft sells more than vista as they moved on windows 7

  You should get that instead

  and here is a link to the HP vista and windows 7 32-bit and 64-bit drivers for your model of machine

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=3567334&LC=en&cc=us&DLC=en&submit.y=0&submit.x=9&lang=en&cc=us

  Windows 7 price

  http://www.microsoftstore.com/store/msstore/en_US/list/CategoryID.50726100