fan does not 100% after formatting

Similar Questions

• Satellite P850-30W - the fan does not work after returning from the mode "Eve"

  I have a Toshiba Satellite P850 30W with bios 1.90.

  Sometimes the fan does not work at all after back mode standby on windows 7.
  What happened twice (perhaps several times without knowing me), and Ive had the computers for a month.

  Normally the fan starts to run when the CPU gets more than 50 degrees celsius and stops less than 50 celisus...

  I tried running Prime95 when this fan-this occurs and the time of the computer got dangerously high (near 100 degrees)! the fan did not start at all
  .. .This error could damage the laptop potentinally...
  to get the fan turns once again I have to restart windows

  anyone experienced this?
  I guess that the fix would be to never use standby... or toshiba needs to fix it with an update of the bios.

  > Sometimes the fan does not work at all after back mode standby on windows 7.
  > What has happened twice (perhaps several times without knowing me), and Ive had the computers for a month.

  You said it's happened twice and only sometimes done this means that above all the fans are working well?
  In this case, this would mean that it of difficult to reproduce this problem, but you might be right: maybe a BIOS update would help solve this problem permanently

  I found some discussions on the stand-by mode and fan activity and in most cases, the update of the BIOS was the key.

• Re: Satellite A300 - fan does not work after installing Win7

  Hello.

  I did a new install of Win 7 pro 64-bit, and after it does not my fan, not at the start or in Windows. To check if it the fan itself was broken I re-installed Vista instead and the fan worked again!
  Installed new Win 7 but now it's silent :( I checked in the BIOS (latest version 1.80) but I couldn't find any option here. Am I missing a driver or something?

  My Satellite canned extinguishing because of this, so I would really appreciate help :)

  Best regards / Ocke

  Post edited by: Ocke

  Hmmmm... really strange. I use Win7 32 bit on my Satellite A300-1LI and it works perfectly.
  Maybe a stupid question now, but have you tried to use the 32 bit version?

  You have also installed all the Toshiba drivers Toshiba value added package (includes the Toshiba power saver tool)?

• Satellite M30-604 freezes and the fan does not work after replacing

  Satellite SM30-604. Laptop has left the mat from one day to the next and overheated! Fan won't spin and laptop start only occasionally. Thinking that the fan was fault I replaced the fan but even this new fan doesn't spin. The heat sink is totally clean - dust free inside the fins at all. The laptop is only 2 years.

  Cooling using forced (by sticking a nozzle of aspiration to the output of the cooling fan!) the laptop starts sometimes as normal until the desktop screen with all of the usual icons and no error message. But then, it does not further - the freezing of the screen, keyboard and mouse.

  Most of the time it does not start at all. When it does not start, the blue LED lights up but there is no hard disk activity or LCD at all - even the wifi LED lights even.

  Really grateful if someone knows what's going on. You are not sure if it is the main processor that is defective?

  Thanks in advance.

  Charlie

  Hello, Charlie

  As you know on this path is not easy to give an accurate diagnosis, but according to your assignment, I guess there is a complex problem and unit must be properly verified. I also think that there must be a problem with the electronics.

  It is really possible that the motherboard needs to be replaced but, as I already said, it is not possible to say something specific about your problem. Try contacting Asp and you will see what they say.

  Good bye

• Satellite L40 - 18W - USB ports does not work after format HARD drive

  I formatted my laptop "L40 - 18w" after that all usb ports do not work.

  Could you please help me on this issue

  Thank you

  Ben is right. After the installation of the operating system as a first step, you need to install driver chipset.
  Please see the download page for Toshiba under http://eu.computers.toshiba-europe.com
  There you can find all the drivers for your model of laptop including driver chipset.

• Qosmio G35-AV650 does not start after format

  Okay, so I downgraded/upgraded my computer back to XP from 7 a month ago.
  Yesterday, I went to the library for all my updates and whatnot that I neglected since the upgrade. When I turned on the computer in the library, it would not be loaded the office correctly and an error box open stating that it was impossible to recover the THotkey. It turns out that my feature key drivers took a dive. I've done everything I can to solve the problem. Nothing worked, I decided to reformat.

  Early upward the dinosaur this afternoon when the format is finally finished, it would not fully boot screen where you are asked which language you want to use, what time format, all of these bases. I tried to reboot several times, finally tried safe mode, even to reformat again, nothing works.

  Now, seeing as I was only reformat to XP in order to enter my card default sound drivers to see if they would work on 7 (the company that made my card was bought shortly before 7 was released and that they still need to make new drivers), I decided to say screw that it and any format the computer back to 7. When it loads everything from disk (disk? drive?), it goes to the screen asking what disk I want to install, it says that I have no disks on which I can install it.

  I came across this problem before, the first time that I put 7 on the computer. Since I have two hard drives, it needs the RAID drivers that connect the two. I downloaded several different, all for Toshiba Qosmio G35-AV650 RAID drivers, but it detects all the drivers. The way I do it is to put on a flash drive and tell the computer to get them from there. I do everything the same way I did before, but nothing works at all. I tried to go into the BIOS settings, but I have no idea what I could do.

  I'm tearing my hair out trying to figure out what I can do here, but I'm completely lost. Any ideas?

  You use a generic Windows 7 disk? Or a Toshiba Win7 upgrade disk?

  Basically, you need the drivers SATA F6 (INFs) on a USB Flash drive during the installation of Win7. The version of Vista should work fine in Win7.

  You can change the RAID settings in the BIOS to "JBOD". First, make sure you back up important data.

• 240 x fan does not stop after the BIOS updated to v2.30

  After BIOS update to v2.30 (from v2.24) on my 240 x there fan started running non-stop on ~ 3 k rpm, so that the computer is idle. Downgrade to the version of the BIOS v2.29 solved the problem.

  Just for info.

  
  

• My dell Vostro 1400 sound does not work after formatting. OS is Vista

  I had formatted my Dell Vostro 1400

  Windows Vista operating system has been transferred.  Also, it has been updated with SP2

  After it there no sound work in one of the application.

  Hello

  I suggest you try to launch the fixit of this link and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems

  Also, try to update the latest drivers for the sound card and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  It will be useful.

• Satellite Pro 6100: error message - cooling fan does not work

  Hello
  I have a SP6100 and it keeps giving me an error message about the cooling fan does not. Then he tells me to stop immediately and runs very slowly. The fan come on, but after three or four short bursts it stops and the message appears.
  Is it a mechanical problem with the fan? I took out the radiator and the fan, and it was clean and not sticky.
  What is a system problem? The BIOS has recently been updated.
  Should I just invest in a new cooling unit and if so where would I get one?
  Any help would be greatly appreciated!
  Thank you.

  Hello

  I recommend to contact the ASP (certified partner) because it can test your device and can do a diagnostic test.
  You can be sure that the laptop will be repaired correctly 100%.

• A60 Pro satellite fan does not

  Hi all

  I have a problem with my sons laptop. Intermittently, the fan does not start and after a while, the computer overheats and stops.

  The problem is not the fan itself, it runs for a few seconds when always first turned, but then sometimes does not start again.

  When this happens, the only way I can get the fan works again is to remove the battery (with no power applied area) and leave the laptop for a little while, then re - turn on the power (battery or sector, it's okay)

  Only, I arrived at this "difficulty" by accident after many hours of troubleshooting, upgrade the BIOS, cd restore and apply all other updates from the support site (which did nothing).
  When 'fixed' portable tracks without penalty - until the next time, he decides to "free" itself!
  The closest I can find as to the cause of this is that it seems to happen when the battery has been recently fully charged (i.e. charged during the night), but it is by no means certain that the fault will be re appear.

  As part of my diagnostic tests, I installed a utility material, which shows that, in default conditions, the CPU temperature is always reported as 18 centigrade monitoring. It never varies.
  When you are working correctly (the fan) the CPU temperature is shown as variant.

  My best guess is that is some sort of glitch in the system management bus and eliminating completely any kind of power it resets somehow.

  If anyone has any suggestions on how (if?) I can cure this permanently, I would be very grateful.

  Have scoured the forums for references, I've not found anything about this problem.

  Thank you
  Steve

  Hello

  I agree with you when you say that it is a very special problem. Because of this, I really put t think you will be able to find a quick fix to this problem. Fan behavior is really strange, but watch the CPU temperature is also unrealistic and it is about 60 C and cannot be 18 C as shown.

  The fact is that fan activity depends on the temperature of the system and sensors to measure the temperature. Here, we can speculate on all, but believe me, the device must be checked properly. I'm 100% sure it's hardware related issue and installation or recovery will probably not solve the problem.

  As you can see preinstalled monitor tool completely unrealistic show its temperature and it has something completely mixed up.

  I recommend you contact the partner of service allowed in your country and let check the device and the motherboard. They have designed special tools and I don't know that they can give you an exact explanation what the problem is.

• My HP laptop cooling fan does not work.

  Okay, so. I have a HP Pavilion 1145sg g6. It worked fine all morning, and then I put sleep temporarily (about ten to twenty minutes). When I went to turn it on, the screen was black and he said something along the lines of

  "the system has detected that a cooling fan does not work correctly. Suite operation is not recommended at this time... may result in unpredictable behavior that may result closed random, loss of data or damage the system as possible. »

  Then after a few seconds it stops completely. There is an option to continue with the summary of the system and I clicked once on it, but she didn't go through completely for allowing me to use my laptop properly (I arrived at my wallpaper and it stopped).

  This has never happened before, and I never had any problem with my laptop, like this before. I have had him since last August, and it worked pretty well through until today. Of course, the system sometimes, accused but nothing serious, for the most part just aggravating.

  How can I fix?

  Someone said here that they stung the fan with a hairpin and it started working. I took a toothpick and switched my laptop and tried to move the fan and the fan started WALLA on! I noticed that a lot of dust in there and that's probably the culprit first event hough I keep this laptop clean every day, this darn dust is sneaky and small. If you use a toothpick, make sure not to break anything especially the toothpick. last thing you want to do is cause more harm. Now that I think I don't remember when the last fan worked and if it wasn't for the message that popped up today I would not of the same notice I wasn't to hear the fan because last week I said "wow is not the substance of this portable super hot feeling", but I just thought that my fiance was simply playing games on the computer for too long and that's why he was hot. He never closes the computer off smh. in any case, I'm very happy I read this post of a person using the PIN to hair. That's what forums are all about. Help each other. I hope it works for you. Be gentle, try pushing the way fan propellers in clockwise. Use a flashlight to see if dust or anything like that is by the way to allow the fan to run its on.  I blew in the vents, but it did have almost all of the dust of the road.  All of these messages, it seems this is a common problem. Good luck

• Satellite P105 - GPU overheating as fan does not work

  I brought a Satellite P105 - S9337 laptop computer around a year ago and it's been great, but I had a problem that began a few months ago. The GPU fan does not run under windows or any OS. It works correctly in the BIOS, but when I hit the operating system, it will stop. This is obviously the cause for overhead.

  -J' tried different drivers of Toshiba and other sources. Currently using 7.15.11.5666 which was the last version of Toshiba.
  -Tried all BIOS and running 4.40.
  -Cleaned it if sure there is no dust blocking the fan wheel.
  -I even sent to Toshiba for repair 4 times and it comes back with the same question.

  It's as if the fan control is equal to change the operating system when it reaches him like bios and basic OS (dos, the flash media bootable back past) works very well. It runs when she is hot and stops when it is ok.

  At the moment that I leat overheating for a while then he seems to remember he's a fan after 30 minutes or more and comes into play. It works on OS at full speed, until my laptop loses power or I unplug battery, that I did today to increase the RAM.

  There must be some drivers or BIOS out there that allows the BIOS to manage the fan or it just as it manages itself is so it doesn't overhead. I'm not pleading can someone help me with what it's getting very boring. e-mail is [[email protected]] If you want to contact me, because I'm out of ideas.

  If I can't get this resolved I'm thinking of dismantling and wiring of the fan on but would prefer to avoid that for now.

  My laptop (P100-481) was overheating too since I have updated BIOS 4.20 and above all. The latest version of the BIOS with work-fan control was 4.00.

  There are two ways to set the fan control:

  1 go to BIOS 4.00. You'll get stuttering in games because the initialization of GPU in the form of Versions all 3.30 to 4.00 are buggy.

  2. you can try this way: [http://www.laptopvideo2go.com/forum/index.php?s=679696d192a1f43137253716ebd799b8&showt = 19190 CIPO & view = findpost & p = 79039]

  It's not easy install a double Windows, but it worked for me.

  There is a bug in the BIOS 4.20 4.30 and 4.40 and a lot of people have trouble with the GPU fan. So hopefully Toshiba find time to fix it in the near future.

• Satellite Pro C650 - cooling fan does not work

  My Satellite Pro C650 overheats and stops automatically within 20 minutes of leaving upwards. I checked the CPU fan and noticed that it does not turn upward, even if the laptop would become very hot. I tested the fan with a 9 volt battery and it works perfectly.

  Can someone tell me exactly what the problem is? And how to solve it.

  Thank you.

  > Can someone tell me exactly what the problem is?
  On this virtual path, no one can say with certainty what the problem is. We can only speculate what may be the problem.
  Usually, cooling fan starts immediately after starting the laptop slows down and offers the optimum temperature of material. After reading your ad I didn t understand how it works. He turns and there is no sign of life?
  Problem can be power.
  Cooling fan will be controlled by sensors of temperature and activity depends on the temperature of the material but if your machine cooling fan does not work, I imagine that there is no electric power.

  What do you think?

• Satego X 200 - 21U: fan does not

  Good my X 200 - 21U Satego fan does not work, never.

  The symptoms for her overheating if there is a game with graphics more difficult and after 5 to 10 minutes it just turns off completely.
  It never all working temperature Vista and CPU, even though the game never exceeds 52 degrees C. So it should be the temperature of the GPU, that I can't control, which rises.

  The laptop itself is only about a month so there should not be any dust or dirt inside. I tried blowing into the fan, while the laptop was closed and there was no sign of dust coming out.

  My question is if there is a way to solve this problem by software means or what I need to send it in for repair?

  Thanks in advance

  Post edited by: 580xylo

  Hi friend

  If you still have as standard all toshiba drivers and not some drivers updated the site to third party Web, please click [HERE | http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_whitepaper.jsp?service=EU&WHITEPAPER_ID=0 000000871] to find the nearest available certified service partner in your country.

  Contact and send the machine for repair since your question looks like a hardware problem which shouldn´t be taken on the shoulder of light... :)

  Welcome them

• CD/DVD drive does not work after 8 Win instalation

  Since a month since I've updated my windows in windows 8, everything works fine but the DVD - RW.

  When I put the blank cd and try to open it, it gives me error when opening by saying:
  "windows could not complete the format".

  Who's a software or a hardware problem?

  waiting for help!

  This means that your CD/DVD drive no longer works and is not recognized by the system?

  If Yes, then I would recommend checking this Toshiba document that I found on the portal of the knowledge base site:

  + Why my CD/DVD drive does not work after upgrade to Windows 8? +
  http://APS2.toshiba-tro.de/KB0/FAQ2B03F10002R01.htm

  You must uninstall the programs from Toshiba:
  TOSHIBA Recovery Media Creator
  TOSHIBA Disc Creator