Fan of death on protected 770 ETC

Similar Questions

• HP Pavilion G6 2252so closing down due to the high heat (fan was cleaned up)

  I'm trying to fix a G6 model due to heat issues. The laptop is about 1 year. From what I have read on the internet, it is mainly due to the accumulation of dust. I told the owner that this was not covered by the warranty and offered to help with the cleaning of the fan. I completely cleaned the fan (incl. Remove the fan cover) and change the thermal paste on the processor. The problem persists. With the Speccy program, I read time of departure. for CPU to 90 degrees celsius. It's very different when the laptop shuts down. Sometimes it happends fast, at other times, he can run for hours. Even if the processor is completely cold, you can stop even before windows starts correctly. I managed to see the temperatures over 150 degrees celsius which should be alarming high. Even 90 degrees seems VERY high to me. The air blown by the fan seems not hot. It is only moderately hot and adjusts it fan speed according to the temperature. He begins to rise from more than 100 degrees. 90 to 99 degrees it runs pretty slow.

  If I try to go into the BIOS, I have only seconds before the closed laptop.

  From my point of view, he owes me two temperature sensors not working not properly, or the manipulation of temperature sensors is misinterperet, or simply the cooling system which is default. I don't know how the cooling system. The seat has a cobber lead wires for the heater and the fan. The tube contains a fluid? The liquid could somehow have vapourised?

  Be warm and helping the owner canceled its guarantee, now that I've had the dismantled oidissement?

  I tried to havn't updated the BIOS, because I'm afraid I'm going to brick the laptop, if it goes out during the process.

  Where is the temperature sensor placed on the Board? Is the sencot'en CPU built in or is it place in over/under it?

  How can I help the owner more far.

  Best regards

  Frank

  @FrankH82

  Hello again. I had actually read what you have written, but included these pages although I knew you did a large part of him he was already comprehensive, but also a reference to the point in case there was something on the picture in one of the documents that you may have missed, as a task to clean. I also realized that the BIOS update has been in the process as well, but guess you wouldn't do that, according to your previous statement, and that's understandable. I have not updated the BIOS, either when the PC has tendency to overheat and stop in the process (and brick it).

  In addition, there is the part about hardware failure analyses. From what you describe, it seems to me that the fan does not work as it should and is the likely source of the problem. If the unit is running too hot that you mention and the outgoing air flow is not so hot then there isn't enough air stream passes through. If instead it turns out to be a sensor problem, which is most likely going to require a replacement of the Commission.

  I have included the Service of Guide so that you can see how disassemble the unit safely if something had been missed in your household, and also, so you should have access to the parts list, if it turns out that the material is the source of the problem, since it includes the reference numbers for various sections that are replaceable by the customer including the fan and the heat sink (, motherboard, etc.) I have also included in part to answer your question on heat sensors that you request that are not listed as replaceable parts by the discreet.

  With respect to the copper pipes, they are units normally sealed with a small amount of distilled water inside at less than the normal pressure to reduce the boiling point of water, sort of way, it is meant to vaporize to help dissipate the heat. The only reason why the liquid inside would be gone is if the seal in the hose is damaged. If this is the case then it should be replaced.

  Now at this point, other than hardware problems as possible, as the system of cooling or the motherboard, which might need replacement, you can also look at the possibility of a cooling plate to increase the airflow. I myself for one of my laptops that I have left my son to use. He was very helpful while working in a warmer room in summer. It could be a quick thing to try so to make reliable unit until the likely hardware problem is resolved.

  Finally if you don't find that it is the material that needs to be replaced you should try calling the technical support to the 800-474-6836 line. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  I hope this helps.

• G7 HP - 1310us Notebook PC always displays this Start-up of ON CODE: CODE: 90 b, cooling fan.

  ON STARTUP, I GET AN CODE: 90 B: FAN COOLING SYSTEM... ETC.

  1 HP Pavilion g7-1310us Notebook PC

  2 operation system: Windows 7 Home Premium 64 - Bit

  3 Error Message: (Note: not true) code fan 90 b, "the operating system has found that a cooling fan has stopped working, or knows a dysfunction." go to: www.hp.cpm\go\techcenter\startup for instructions and solutions...

  4. I didn't notice "problems" - BUT I HAVE BEEN USING AN EXTERNAL - DOUBLE COOLING FAN UNDERNEATH THE PC, JUST IN - CAST FAN no IS NOT WORKING AT ALL.

  5. the information is pretty much the same - at the start of my cell G7-1310us w / Windows 7 Home Premium: I always get the same CODE of ERROR / MESSAGE: 90 b - "Cooling fan has stopped working or has a malfunction."

  Note: I have seen many other similar complaints / problems on this forum and Google. Nobody seems to have an answer from descent...

  Thanks for your time:

  Scott Stewart Haight

  [email protected]

  Hello

  You can try the following steps to solve your problem. Incase if still does not work please call HP technical support check the warranty status and get the part replaced.

  (1) clean the fan vents and check if the fan starts working again.

  (2) Please enter press the button once the error message comes you should be able to load Windows, please visit the HP Web site and update the Bios on the unit.

• How to reset the connection of the OIC during the reception of FAN events.

  Hi all
  
  And thanks in advance.
  
  We would like to use the FAN (Fast Application Notification).
  Our server configuration:
  1 service (context threaded & unique unique).
  Model notify is GIS.
  Service transaction involves / q (tmqforward) and the database to oracle using the BEAK.
  
  We want to reset the OCI connection when it receives the event of failover of FAN.
  Can we push (tpnotify etc.) the FAN event in the (auto) service?
  We can register and receive FAN events.
  
  But:
  Can we call tpbroadcast or tpnotify from the booster FAN?
  Is the same thread?
  is thread-safe tpbroadcast and tpnotify?
  do I need the thread context main service?
  How can I get the thread context main service? (save it in a global?)
  
  Concerning
  TechSgin

  Hello

  If you use transactions (tpbegin() or TRANSCENDING) Tuxedo, then Tuxedo will restore database automatically connecting to a failure.

  Kind regards
  Todd little
  Chief Architect of Oracle Tuxedo

• stop random blue screen error DRIVER_IRQL_NOT_LESS_OR_EQUAL STOP: 0X000000D1

  original title: stop random screen w/blue

  I need help to solve this problem. My system will freeze and then randomly crash if I run games, programs or just sitting idle. I took the fan and blew out the dust, etc... and still no better. The info I get blue screen are:

  DRIVER_IRQL_NOT_LESS_OR_EQUAL

  STOP: 0X000000D1

  nvstor.sys - address 83F42395

  Any help would be appreciated to gratly.

  Hello

  Here is a version of Vista of the troubleshooter that Dena referred:

  =================================================================

  Check this thread for more information on using BlueScreenView, MyEventViewer and other methods of
  Troubleshoot the BlueScreens - top 3 answers.

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

  -----------------------------------------------------------------------------------------------------------------

  Check with your manufacturer for newer drivers video card (special forces), known issues and
  other possible problems - check also the video card and game maker forums. It can even be
  a problem created by the interaction of two pilots (rather than the usual cause), perhaps the
  video driver and a swap file error and other causes work together to create the problem.

  ==============================================================

  Even if you have done some of these methods here is the complete troubleshooting tool while
  dealing with his need.

  Think video drivers especially if it may be others. Refer to the section of driver in my generic bluescreen
  methods of troubleshooting below. BIOS, low and antispyway/antivirus/security chipset drivers
  programs may also cause this. Check the resolution of the problems and when you get to the pilot and sections tests memory refer to the generic methods in the next message and then returns to the resolution of problems
  If necessary.

  BCCode: D1 0x000000D1

  Cause

  A driver tried to access a pageable (or that is completely invalid) address while the IRQL was too high.

  This bug check is usually caused by drivers who used a wrong address.

  If the first parameter has the same value as the fourth parameter, and the third parameter indicates a runtime operation, this bug check was probably caused by a driver who was trying to run code when the code itself has been paginated outside. The possible causes for the error page are:

  • The function was marked as pageable and was operating at an IRQL higher (including obtaining a lock).
  • The function call was made to a function in another pilot, and that this driver has been unloaded.
  • The function was called by using a function pointer that was an invalid pointer.

  BCCode: d1 0x000000d1<-- read="">
  * 1210.html? order = votes http://www.faultwire.com/solutions-fatal_error/Driver-IRQL-not-less-or-Equal-0x000000D1-

  =========================================

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard event viewer
  Windows. TIP - Options - Advanced filter allows you to see a time rather
  of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------
  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death '.
  hangs and displays information about all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, drivers particularly video drivers but it
  are other causes.

  You can do without if needed fail or the Vista DVD or recovery command prompt mode
  Options if your system was installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
  program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly

  
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• How can I keep Tuvalo or other sites invasive to change my home page?

  Why Firefox can not add a simple question opt-out or the protection password to change the home page?
  «X is trying to change your homepage to X.com.» Allow? O/N.

  After you add that, add: "permanently block access by X.com. O/N.

  Web sites do not have permission to change your home page. If you find that it is turned, consider the possibility that you have somehow an extension of thugs.

  Try this:

  Disable all non-essential or unrecognized extensions on page modules. Either:

  • CTRL + SHIFT + a
  • Firefox orange (or the Tools menu) button > Add ons

  In the left column, click Extensions. Then, when in doubt, turn off. (Or if it is clearly badware, delete).

  Typically, a link will appear above at least an extension disabled to restart Firefox. You can complete your work on the tab and click one of the links in the last step.

  Leaving you to restore your homepage?

  Some related questions:

  (1) if there is no Remove button to an extension, see the control panel. In Windows Vista and 7, the relevant dialog box is "uninstall a program". don't know how it's called point 8.1 of Windows. By clicking on the column heading "installed on" sort by date and unmask possible grouped items that you did not know were being installed. Remove all the nonsense that you can. (If you find something named research protect or BrowserSafeguard, remove it.)

  (2) software from third parties can create a file named user.js that Firefox reads at startup and which will replace the saved settings from your previous session. This article describes how to track down and remove this file if you have one: How to fix preferences that will not save.

  (3) some utilities such as Advanced SystemCare have a feature to restore your settings changes, allowing lock unwanted parameters. Them is called surf Protection. If you have this or a similar Protection setting (etc.) of the home page that prevents you from making the changes you want, turn off temporarily (or permanently).

  (4) in order to mop up unwanted software, try the scanners of other Firefox users have found useful in this article: Troubleshooting Firefox problems caused by malware.

  I hope that it will control.

• 64 v29 and v26 under Win7 64-bit Firefox bit every night are so slow for broadcast, only 4% of the BW otherwise directed by sam of firefox running Win7 32 bit.

  Under my Windows 7 64-bit OS, I installed the Nightly Build v28 and v29 "internet speed test" and each time, I can only achieve something < 2 Mbit/s for my home WiFi, router gateway that is subject > 56 Mbps. The only Nightly version work was v23 which could reach nearly > 52 Mbit / s. But once I upgrade to higher version v23, all speeds normal I could achieve in nocturnal v23 disappeared. The same issue also plagued firefox v26 under Win 7 64 bit.

  For more information, this does not apply under Win 7 32-bit OS - the same v26 firefox works fine for pure speed of BW near and > 56 Mbps. Why not in 64-bit OS seems to be the main issue?

  What is going on? I appreciate watching you in and help out me on this dilemma. Thank you!

  Sincerely
  My Shao

  Hello Shao Ma, when using speedtest.net or a similar site based on flash to measure your speed of connection, then it could be a problem with the protected mode that adobe has implemented for its flash plugin for firefox. Some older versions of f-secure or report of trusteer are known to cause slowdowns with flash, or it could be something similar on your system that interferes (maybe security software that block/sandbox the container used for protected mode, etc...).

  as a solution, you could try to disable the protected mode and see if that makes a difference.

  in case you want to solve the problem more far, it would be preferable to contact adobe support and file a bug at bugbase.adobe.com report (choose 'Adobe Flash Player' as the product & 'Browser Integration' as being the product box), since they will have to better understand the inner workings of flash protected mode and therefore knows what else could be the cause of the problem you saw.

• Super High speed internet Time Warner installed (50mbps) but foxfire operating only at 1.35Mbps, while the internet Explorer works fine

  Internet (50mbps) Time Warner installed high-speed yesterday on my computer, but when the guy left I noticed that the speed was very slow. SIS one test on speedtest.net and found I was getting a maximum of 1.35mbps (sometimes as low as .62mbps). So I had them come back and they tried all kinds of things, only to discover Internet Explorer gets 50mbps, so it's something with Foxfire. What would it be?

  Hello, when you use speedtest.net or a similar site based on flash to measure your connection speed, it could be a problem with the protected mode that adobe has implemented for its flash plugin for firefox. Some older versions of f-secure or report of trusteer are known to cause slowdowns with flash, or it could be something similar on your system that interferes (maybe security software that block/sandbox the container used for protected mode, etc...).

  as a solution, you could try downgrading of 10.3 flash (which is always supported) or Disable protected mode & see if that makes a difference.

• Satellite C660D is not booting

  I have a Satellite C660D, and normally a day off it will start is no longer. No lights on the laptop at all. Have tested the lead/charger and it works very well, do not know how to test the battery and there are a multitude of pins. It seems that there is no life at all, won't boot no whirring of fans or lighting of the screen etc.

  Any help would be appreciated. He is now out of warranty.

  Hmmm, it's not easy to say what the problem is here.
  Unplug the AC adapter / CC, remove the battery and press the power for 30 seconds. Having done this connect adapter only and try to start your laptop.

  What happens when you do this? Is there a reaction?

• Satellite Pro A10 - no answer - enter HDD #0 error

  Pro warranty A10, student daughter portable computer reports no longer works, already suspended and finally no response from any other lights at the entrance to DC charger is connected.

  Clean fan/radiator, a lot of lint etc. removed. No obvious signs to know why the Board me dead however. Confirmed with counters that this DC of the shipper in me Board. Ordered A replacement me Board, FHZSY1, eBay and equipped, taking the precautions of static, but can not confirm that they were done by the seller.
  Now, new Board of Directors recognizes the input DC and recharged the battery OK. Tried to turn on the laptop but terrible mistake INPUT #0. Concluded that the HARD drive had also been damaged. New (Toshiba box) arrived two days later but gave the same error when mounted. BIOS won't recognize HARD at all. Tried all the messages on the verification of the connections and certainly not of mounted riders. Laptop will continue to start from a system CD, as it may then think the new me Board is OK

  Are the HARD drive of the Satellite Pro A10 different from those on the A10 satellite earlier?
  Any other ideas on this INPUT #0 error?
  Thank you

  Hello

  As much as I know there is no different hard disks and your use of the same laptop as most other Toshiba laptops. I can just write that this error is certainly resulting HARD disk problem. The HARD drive is obviously not identified by BIOS correctly.

  Sorry but I have no more info on this subject. By the way: is the motherboard new or used one?

• Problems with flag a724n

  I have an old a724n of Pavilion, and it is my computer families. The computer has recently been gel or the fan runs continuously.  I deleted all unnecessary software and cleaned the hard drive and defraged, and she always does.  I am running windows XP home on it.  Any suggestions?  I have plany of hard disk space and memory as well.

  I solved my problem, but I wanted to post so that others may learn as well.  My computer was in place and the fan was always on and freezing, etc, etc...  I removed the cover and it was full of dust and pet hair, I cleaned it all, especially the fan and it's like a new computer!  I know that the dust is the enemy, but I am blown away by how much better the machine carries out now!

• Satellite A100 freeze temporarily

  Anyone had this issue with an A100 freeze temporarily? He does about five to ten times per day.

  Hi George,.

  Could you be a little specific mor are contiguous with the nature of your problem? In particular, the duration of the 'freeze' and if it is accompanied by other symptoms such as busy fan cooling, unexpected hard drive activity, etc. Also get it for laptop since the 'freeze' itself or you have to take steps to erase it?

  Light breaks (usually a few seconds) may occur if a background activity kicks in and requires processor to complete cycles. This can be events such as Windows, looking for product updates from the Microsoft web site, applications, anti-virus updates, e-mail applications checking e-mail etc. servers. Even unexpected applications (such as Nero or Adobe Acrobat) can do audits of regular update which can cause to your laptop pause momentarily.

  It is also useful to check your laptop for malware (use Adaware and Spybot S & D) to ensure that there is nothing present that may trigger this behavior.

  Kind regards

• I can't all Toshiba Apps for Win 7?

  Hi all!

  I'm trying to decide if now upgrading to windows 7 from vista.
  So far, I'm to be defensible encouraged to spend so I guess I have.

  However, I have a lot of applications and software Toshiba on my system.
  I'd be able to get and simply re - install it all.

  Referring to facial recognition of toshiba HHD protection app, etc. among the few.

  Take a look on the European driver Toshiba page.
  You will find all the drivers and Toshiba tools for your laptop model.
  In addition there is not all in one package that would install drivers and applications at once.

• Satellite Pro L100 - Crash during the update of the Bios

  Hello

  I am the owner of a Satellite Pro L100 (PSLA4E)

  On the Toshiba site I downloaded the BIOS update. While installing I read that it was necessary to supply cable is plugged. Before I could cancel for the cable, he had started and then frozen. The computer stopped working and so I turned it off! Since then, I've read that it was a very big mistake!

  When put on the fan starts and I can hear etc cd drive spinning. After 15 seconds, the screen is blank, the computer starts beeping!
  Is there a way to solve this?

  Thank you very much
  Rich

  Hi Richard

  Seems not good buddy from your description, that something went wrong during the update procedure and now the ROM module has been flashed properly.

  Maybe you area lucky man and the motherboard isn't too bad, but only the Rom module must be flashed again.

  Unfortunately, this must be done by the technician of the ASP. You will need to contact the ASP in your country for assistance.

  Good luck and have a nice day

• HP 8710W (p/n: GT648PA #ABG): 8710W does not start - the battery light flashes orange 7 times then 1 green.

  Troubleshooting done so far: I removed (even the RTC) battery, hard drive and memory. Hold the power button for 30 sec.

  When I re - install the battery and press the power button, it flashes 7 times orange, and then Green 1. Same thing happens with or without the power supply is connected.

  The laptop does well (no fan, no disc doesn't sound etc.) and the screen stays off (i.e. no splash screen).

  I thought it was a dead battery, as it was 8 + years, so bought a new replacement. Unfortunately, there no fixed and I still have the same problems with the new battery.

  How to decode what mean hot flashes?

  What else can we test it before I bin the laptop? I would have preferred not to do so as he has been a full rock performer and the 17 "display is fantastic as a desktop replacement.

  Any suggestion is appreciated.

  Thank you.

  Unfortunately, this seems to be a motherboard problem. After eight years of service, it is left for a digital camera never never land.

  Unfortunately, it's time to bin and source of a replacement book.

  You can retrieve data from the hard drive using a cable or a drive enclosure hard usb 2.5 ".

  I understand your disappointment. Workstations are portable very special and very expensive to replace.