Fault scanner

Similar Questions

• Fault scanner MG7520 Windows 10

  Hello

  Recently bought a Canon MG7520 printer and I have a problem with the scanner.  When trying to scan from my Windows 10 pc, a window pops up on my screen with an error code 2 250 200 ScanGear.  The error code also appears when I press scan on the printer button, have the machine Windows 10 selected as the destination computer.  Now, I also have a Windows 7 machine, and as far as I know, the scanner function works very well on this pc.  I should also mention that using the Windows 10 scan program works with the scanner - no problem - which leads me to believe the problem lies with the software/driver ScanGear, and ScanGear is not compatible with Windows 10.

  What is, in essence, the problem, the incompatibility of the software with windows 10?

  Also, I couldn't find answers for the error code 2 250 200.  What it means?

  I think I've solved the problem.  I got of Kapersky's Internet Security on my Windows 10 machine.  The subscription has expired months ago.  I uninstalled the program completely from my system.  ScanGear now seems to work fine.  I made three consecutive tests since my pc - all three worked.  I'll post here if it is not operational.

• Light fault scanner want 120

  all I get is vertical lines whenever I try to scan or copy, this has happened a little over a week ago, when I wanted to make a copy of my passport.  On the HP site it says that I have more defects, I bought this printer last summer, and after a few months had to have a replacement as he himself turned on and off all the time.  I tried the eprint solution unplug it and factory reset please I can do it is expensive to repair, I'm sure I'd have a year warranty from the date I received the new printer, but I say I got it June July 2013 I bought my book club and finished paying for the month of August so if I had another a (replacement) that the original was probably defective , I'm still covered please any info greatly appreciated I tried all troubleshooting.

  I am pleased it is now resolved HP Customer Relations called and they are sending me a printer of replacement with a warranty of 3 months up to at least now I know how much guaranteed I and you have the option to extend it much thank you to you all and this forum.

• Photosmart Premium C309A: C309A Fault Protection to access the properties of the printer and will not print (Windows 8.1)

  My C309A, connected via USB, my system worked very well through the life of WIndows 7 and Windows 8.1, until this week.

  I did run the software in PS_AIO_05_C309a_Net_Full_Win_WW_140_408 - 4.exe and then this week I received notice that there was a software update. I downloaded and installed PS_AIO_05_C309a_Net_Full_Win_WW_140_408 - 5.exe, and now my printer does not print.

  I uninstalled the previous version, without error and installed this new version, also without error. But, when I click on printer properties

  

  I get a protection fault.

  

  If I try to print a test page, the system hangs for a few minutes, then the devices and printer page is closed (with no message).

  I tried the Ethernet connection instead, but that made no difference.

  Interestingly, even if printing does not work, scanning and fax are. I can connect to the scanner from Paperport or Adobe Photoshop Elements.

  I uninstalled the software several times and tried both the old and the new, and they both do it.

  I tried to run print and Scan of the doctor. Who says that the driver is missing some files and to uninstall and reinstall, but I did it at least 6 times without success.

  Any ideas?

  Thank you

  Stan

  FWIW, I have set the printer by improving the system to 10 Windows (which went very well). It works fine now.

• 120 jealousy scanner

  Want all-in-one printer well under warranty (bought end of August 2014) 120.

  Problem: sudden lack of scanner.

  I got in touch with Scott of the Canada-USA on 17 November 2014, 22:08 (Italian time).

  He gave me all the instructions of thHP printing & scanning doctor (new driver, new firmware, ecc), obviously with the result draw: it is not possible to establish a link between the PC and my desire to 120.

  In any case, using the copy function, I can say that without doubt there is a hardware failure as I see that scan ioff light, while that the sensor detects the light.

  I hope I will get you the instructions for the substitution.

  Thank you.

  Andy1943

  P.S. The scan function seems quite a problem printer Envy: a previous Envy 100 (out of warranty) exhibted one fault simmetrical: light scan, sensor to scan out of use

  I brought your question to the attention of a team within HP. They are likely to ask for information from you to get your information or product serial number. Please search for a private message from a contact HP identified. Also, remember not to publicly post information and series numbers.

  If you are unfamiliar with the operation of the function of private messages of the Forum, this post has instructions.

• Epson perfection v500 scanner scan from buttons

  It runs from the office, but not the buttons.  It worked fine on windows xp will not be Windows 8

  I downloaded and installed the update of windows 8, restarted the computer and still does not work

  It's always something you face with EPSON.  Their product, they support (or not) under any given operating system.
   
  You have downloaded and installed this?

  Windows 8-32/64-bit driver of the scanner and EPSON Scan Utility v3.7.7.3

  If you did, you should contact Epson:
  http://www.Epson.com/cgi-bin/store/support/supDetail.jsp?BV_UseBVCookie=Yes&category=products&infoType=contact&OID=88368&prodoid=63070478
   
  I note that the driver and the software was published 07/22/10 - my bet is that they could tell you "features do not work under Windows 8"and they can do SOUND like it's the fault of operating systems rather than change of drivers and software for working in the operating system.»

• Fault Module name: llcommon.dll

  Hi people:

  I ran recently Dr. Clean up and now I can't keep my Second Life and InWorldz views running.  They share the same error message

  Fault Module name: llcommon.dll

  Therefore, I conclude that the problem is that a dll file has been "cleaned".

  Can someone advise or help me replace the said missing file?

  Hello

  1 are you getting this error only when you try to open these two specific games?

  We suggest not using registry cleaners non-Microsoft or clean the tools necessary to make settings on the Windows registry or Windows System files, as this can cause problems of stability with the Windows system files. By hoot or by modifying the Windows registry can cause serious damage to the Windows system files and could break your operating system Windows causing data loss that would be not possible to recover.

  Reference:

  Registry cleaners are needed?

  http://Windows.Microsoft.com/en-us/Windows-Vista/are-registry-cleaners-necessary

  I suggest you to follow a few troubleshooting steps and check if that help in the issue of the attachment on your computer.

  Troubleshooting steps:

  You can try scanner SFC search missing or corrupt files that can cause this problem.

  Of file system (CFS) when checking that all the Windows 7 system files are intact and not altered, changed or damaged.

  a. Click Start, click principally made programs, accessories, right-click on command prompt and select run as administrator.

  b. click on continue or provide administrator credentials if prompted.

  c. in the type in the following command prompt window and press ENTER:

  sfc/scannow

  d. you should see the following message on the screen:

  From the analysis of the system. This process will take time.

  Start of the phase of verification of the scanning system.

  % Of verification complete.

  e. once the scan is complete, a test to see if the problem you are experiencing is resolved or not.

  See the following article for more information: http://support.microsoft.com/kb/929833

  Please provide us with additional information. So that we can help solve you the problem on your computer.

  Hope this information helps you.

• Fault bucket: Ox9F_3_IMAGE_RTKVHDA.sys, type 0

  My computer freezes intermittently when I stop, and a blue screen appears.  It is the fault bucket, I've been doing.

  I have a Realtek High Definition Audio Sound Device, but I could not find the driver itself.

  I followed the steps that MS suggested and to disable my sound card.

  Any advice?

  Thank you!

  Hello

  References to Vista also apply to Windows 7.
  
  Updated drivers, BIOS and software control (if any) is a good idea.

  This is my generic how updates of appropriate driver:

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - reset after each
  installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  I hope this helps and happy Hoidays.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Of Scanner all-in-one Officejet 6500 problems

  Hello

  I have a brand new Officejet 6500 that prints, faxes and copies without fault.  It is connected wireless to two different computers.  However, for the life of me, I can't scanner at work - and the errors are the same on both computers.  No matter what I do, the scanner software opens and begins to work, but the scanner itself doesn't do anything (no noise, nothing) and eventually I get message and error that says "Scanner Error" with a bunch of steps to try to fix.  I tried ALL the steps, restart the software, reset the printer, unplug, re - connect, re-boot and even re - install the software - still nothing.  Once I even put in place via a USB cable just to make sure it wasn't a wireless issue, and is not; I had all the same mistakes.  I spent two hours on the phone with HP tech support and after changing a bunch of firewall and other security settings, still nothing.  I don't have anythign fancy; just Windows XP, Windows Firewall, McAfee Suite.  Any idea what could possibly be the cause of the errors of the parser and why there is no communication between the computer and the scanner?

  After countless hours to suck his soul troubleshooting with alleged HP 'Technical Support', at least I managed to reduce this problem down myself and find a solution that works.  I found that the problem of scanning don't occurs if the printer OR the computer is connected to the wireless network.

  The solution is to TURN the wireless RADIO and connect to your network via an ethernet cable.  Then try to scan with a computer that is connected to the network via an ethernet cable.  Note that this will NOT work if each connection - printer to the router - or computer to the router is connected wireless; It takes the two connecitons via an ethernet cable.

  This is obviously a software problem that HP does not and will never be resolved.  So, if there is no way to connect your AIO to your router with an ethernet cable (for example, if the priter is in another room), you're SOL and should probably try another printer that HP will never solve this problem.

• Canon MP Navigator stopped working with scanner. Worked under Vista, not Win 7.

  Scanner Canon Lide 200 worked very well under Vista 64.  I've updated on Win 7 64 and the software interface has stopped working - "MP Navigator EX has stopped working".  That's a BEX error module fault MSONSEXT. DLL_unloaded.  I uninstalled, downloaded the newest and reinstalled, same problem.  Canon had me create a new profile, the program works in this profile.  Canon has written it's rights or licensing of the OS.

  The scanner works with other software.  MP Navigator is a resident program for making copies or copy and email, etc..

  Here are the details of the windows error

  Problem event name: BEX
  Application name: mpnex20.exe
  Application version: 2.0.3.0
  Application timestamp: 488d25b8
  Fault Module name: MSONSEXT. DLL_unloaded
  Fault Module Version: 0.0.0.0
  Timestamp of Module error: 43306199
  Exception offset: 49143a3b
  Exception code: c0000005
  Exception data: 00000008
  OS version: 6.1.7600.2.0.0.768.3
  Locale ID: 1033
  Additional information 1: 0f31
  More information 2: 0f3137665bbf0bb676c8a16f3fa76e52
  Additional information 3: fff8
  Additional information 4: fff84cbc2f915b8472e90c61e476efef

  I had the same problem with Win 7 64. I talked to Support Canon technique and after an hour in which we tested several things, I was told the problem was with Windows and I need to contact Microsoft. I tried to create a new profile that has fixed the problem for about a week, then he came back again! The question may be associated with Windows Update, but I'm not sure. On this last go I created a new profile and then copied to the folders and files from the corrupted profile one at a time to see when the problem would be to start over. After carefully copy of files, save, test Mp Navigator, and if necessary to restore the last good configuration I discovered that the following file was the cause of the problem:

  C:\Users\\App Data\Roaming\Microsoft\Windows\Network Shortcuts\My Web Sites on MSN

  Note: This file was not present in my new profile. In addition, the icon has the shortcut on that marker, but explore announces that it is a folder. There is no file extension.

  I then copied ALL the other bad profile data to the new and MP Navigator still worked! I then deleted the file in question from the wrong profile and MP Navigator started working there too!

  I then reconfigured all my software and IE etc for the first time by looking at the network shortcuts folder. The file in question has not yet reappeared. I made a shortcut to this place, I can keep an eye on it to see when it appears again.

  I hope someone at CANON or Microsoft will fix this issue of profile "corrupt."

  Sincerely,

  David Witteried

• Scanner driver problems/communication HP Officejet 6310

  Background: buy new pc in 2006 (XP Pro)... Bought Officejet 6310 shortly after.  Installation of the software for printing (on the cd) was perfect and as directed.  Computer HP P7 portable bought in 2011, software downloaded from the HP website, installation was still perfect and according to the guidelines.

  This week, I upgraded the old pc from 2006 with new boards (re-used only the cases and the power supply).  Running Win 7 Pro 64-bit.  AIO_CDB_Net_Full_Win_WW_130_141 downloaded from HP, has begun to install.  Problem started when, during the installation process, I turned on the Officejet 6310 and plugged the USB cable as shown. The below screen appeared... not all devices have been installed.  He remained that way for several minutes... the photo below was my first indication something was wrong.

  

  After waiting for about 3 minutes, it appeared.

  

  Following the instructions, I unplugged and rebooted, uninstalled and reinstalled the software... I have downloaded and run the Print and Scan doctor... he could not solve the problem either ('Unable to communicate scanning pilot' was the last word of the doctor).  On my fifth attempt to re - install the software, I got this result.

  

  I sat and waited, and waited, and the software concluded that she had properly installed, even if the photo above also indicates.  At this point, I can print it, but it takes forever and hesitates when printing as if very little data is done by the intermediary.  If I try to use the scanner via the control center, I get the message not found 'HP imaging device.  Also, sometimes, my computer not turn off unless I turn the printer off (the "Shutting down" message remains on the screen until the printer is turned off).

  And this message was not present at the end of each attempt installation of the printer:

  

  Then... I followed all the instructions (I think), changed USB ports, tried the print and scan doctor... I don't know what else to do.  Been working with it for a day and a half and I'm out of ideas.

  Someone at - it suggestions?

  [Edited 14/07/12]

  One of my friends said that it might be that, since the printer is 6 years old, 64-bit operating system can cause problems and HP probably wouldn't need much resources, writing drivers for everything.  I hope that HP support for their products is better than that.  My Officejet 6310 is not ready to be retired!

  [Published 15/07/12]

  Stop the presses!  I'm a little red-faced now... at some point I have disabled Windows Update (I do not remember doing that, but anyway...) I saw that by accident, turned back on and installed the printer software.  I noticed that Windows Update several files and installation of the driver software window indicated that everything was successful.  BUT... I still have a problem with the scanner, but it's a different error... See the image below.

  

  I can print ok, I can copy ok, but I can't scan with the HP Solution Center or the physical button on the printer.  It is here where I am now.

  If you have spent any time trying to understand the first problem out, I apologize for my lapse in not ensuring that Windows Update has been enabled.  If anyone has any ideas on the situation as it is, please respond here.  Thank you all for research.

  I think I found the problem, although it seems so unlikely for me... I replaced the USB cable and installed the printer software and everything worked fine.  To prove that the cable was at fault, I close the printer down and installed the old cable... the State seemed yet, but when I launched a scan he loses communication before the scan is finished.  I turned off the printer and installed the USB cable replacement and performed the function of scan with no problems.  I repeated this scenario again with the same results... with the original cable (that came with the printer 6 years ago) I had communication errors at the beginning or after a scan.  Installing replacement cable took care of the problem every time.

  How can a cable go bad?  I don't understand this.  In any case, it seems to be fixed now... thanks to all that looked and perhaps thought about my problem.  I guess I'll leave the message here for reference.

• Scanner EPSON Perfection V200 Photo: PDF button does not work since I use the scanner with an ASUS i5 running Win 7 Ultimate desktop computer.

  The PDF button does not work since I use the scanner with an ASUS i5 running Win 7 Ultimate desktop computer. I downloaded the 64-bit Epson software for the scanner.

  I found the solution to the problem, and it is indeed with the revised in Windows 7 Control Panel.

  Here how to solve the problem:
  Go to the control panel in Windows 7.
  Search scanner in the upper search box to the right
  You will see a "view scanners and cameras".
  Click it, you will see the Epson Perfection V200. Highlight.
  Click Properties, then Yes, then events.
  Where it says select an event, you MUST choose the event suitable for each option.
  To the Start button, choose Start the series of creativity
  For the copy button Choose launch Epson Scan
  E-mail button also Epson scan
  PDF includes Epson scan
  There you go.
  Now, all this was not necessary before, there are no instructions, and the fault lies with MS. how much more confused MS will do the control panel?

• Resolution S10e with lide 50 scanner problem

  Is there an option how to install the driver for scanner canon lide 50? The original driver downloaded from the site canon a problem with resolution it says need this program of vga resolution or higher, and the General resolution on my S10e with xp prof. is 1024 x 576. So what can I do, or I have unluck forever?

  Thanks for any help

  OK my fault, I do not download driver scan canon toolbox and it have problem with res., but the pilot works fine but for the Toolbox, it is a way how to use it. To order - Hide modes that this minitor cannot display in display properties - Advanced - monitor (as it is described here http://forums.lenovo.com/t5/IdeaPad-S-series-Netbooks/Changing-resolution/td-p/160028), it is possible to increase the resolution and then then the Toolbox works.

• Scanner HP M277 function seems to arbitrarily arrest

  Since the Mac OS upgrade, I have a strange problem. The function scanner built into the provided Apple, HP M277 printer driver seems to stop arbitrarily. When the button "scan" in the print queue window will be gray. If I go into the preferences system-> printers and Scanners and select the printer M277c6 there and click on the "Scan" button, then open Scanner it will try to open the window of the scanner, but it stall and never finish.

  When I restart the computer scanner function seems to be restored and everything works as it should. Someone has an idea of what's going on here?

  I go on the HP website and downloaded their software HP Easy Start and completely re - configure the printer with it, but still the same problem.

  Also, I reinstalled the Apple HP (19,13) v5.0 driver. But always after a certain period of time, the scanner is therefore more accessible. I was not able to point of pin code if another program is the cause. Any suggestions?

  There was an Apple update to restore scanning for some HP printers earlier today. Did you check App Store updates?

• Canon scanner

  Opening of the early Sierra brings up a Panel for list for the user to select scanners. For me no scanners are listed. I have a Canon MG7520 that has worked well for more than a year of Apple operating.

  After checking the scanner and find WiFi and other features everything in order, tempting scan shows a report of several reasons for the failure. The last seems to appply. He says that the name of the scanner is not correct.

  Experiment, I found a work around start in the Apple preferences and go Printers and scanners. It works as follows:

  Power scanner / place the document on the scanner glass / open preferences from Apple (for the top of the screen to the left) / open Printers and scanners / scanner names listed / select or enter MG7500 Canon series 6 / Scanner screen opens (it shows a symbol of a scanner and scan of the word in its upper right) / select the area to be scanned in the new box / click the scan symbol (a form opens allowing the user to specify a name and a location for the scan).

  All this applies only to Canon printer/scanner and maybe not all of them. I imagine that Apple will correct the defect of the opening screen of the Sierra to do its job.

  You welcome any comments from the user.

  Apple - hope you're listening to.

  William foot

  [email protected]

  (1) apple may be addressed here

  Apple.com/Feedback

  (2) it is a product of canon, they can choose to support or not. Apple will not reverse engineer their OS to work for someone else's decision. the developers of Canon had access to OS X 10.12 months before it was public to make the drivers work or not, they chose to not

  (3) send never publicly your e-mail unless you want spam.