Resolution S10e with lide 50 scanner problem

Similar Questions

• "Unknown device" USB Barcode scanner, problem with the USB controller driver?

  Hello

  I need assistance with our Barcode Scanners that doesn't work on our newly purchased computers at HP with Windows7 Pro x 64 operating systems.

  The brand and model of the bar code scanner is:

  Datalogic Heron D130 USB.

  When you connect the scanner to a USB port, Windows will try to install this as a HID, but it takes an unusually long time, about 7-8 seconds, to boot the device and install the drivers and appears as an unknown device in windows "devices and printers" and the hand scanner does not work.

  Sometimes when you move the USB back can I sometimes the scanner at hand to be recognized as an HID device or a Datalogic barcode scanner,

  It works fine until you restart the computer.

  After restart the computer cannot detect the scanner Barcode correctly without re - appears as unknown device.

  I suspect that there is a compatibility problem between barcode scanner and card USB controller on the computers.

  I tried to update all the drivers available on the website www.hp.com and same www.Intel.com (chipset drivers) but nothing has helped to solve this problem

  Tried newly bought barcode scanners and "used" barcode scanners earlier who works on other computers, but the problem remains.

  I found a workaround by connection of bar codes in a USB hub, and then plug the USB hub to the computer.  And leave the USB - hub to take care of the communication with the Barcode Scanner.

  in this case, it takes about 2 seconds for the code scanner barcode to mount correctly in windows under the heading "devices and printers" and then works perfectly, even after a reboot.

  I googled after a response after my problem, but it seems I'm the only one who experience this issue. ?!

  Bought more than 40 computers that I have this problem.

  These were bought at different times with two different for suppliers

  Computer model are the following

  HP ProDesk 1 400 P/N5S21EA

  Specifikations:

  http://WWW8.HP.com/emea_africa/en/products/desktops/product-detail.html?OID=6614160#! tab = specifications

  Does anyone have an idea what could be wrong and how to fix it?

  Thanks in advance

  Sincerely

  Robert T

  Hello

  The problem is not power - related.

  We use passive USB hubs that solves the problemon these computers.

  (it also works with the docks, or if you EliteDisplay E241 HP as we thers a usb hub 2 ports inbulit in monitor that works.)

  The problem lies in the incompatibility between the Intel USB controller and the hand scanner, can be connected to USB 3.0

  When you let another usb-controller support in handshakeing (such as a usb hub), it works.

  Datalogic or Intel would like to acknowledge this error.

  Because none of the big companies want to acknowledge the problem or repair, personally chose to switch to an AMD platform / CPU instead of the Intel and now it works fine!

  We get more performance for your money when AMD is usually less expensive to purchase.

  And because of the poor of Datalogic press where they don't even answer e-mail (their only channel for support)

  I chose to stop using their products. I'm going to use another provider / brand of barcodescanners.

• Office jet while a 6600 PRINTER with scanner problems. but I can't scan where I have a modifiable document because only let's scan me documents I can not edit

  original title * Bubbles44

  I have an office jet while a 6600 PRINTER with scanner problems. I am trying to scan to my hp Pavilion 23 all in a computer with windows 8, but I can't scan where I have a modifiable document because only let's scan me documents I can not edit! HELP ME PLEASE!

  Hello Sharon,

  Thanks for posting your query on the Microsoft Community.

  I would be grateful if you could answer the following questions:

  How the computers are connected? If they are connected as a workgroup or domain?

  Method 1: Disable the security software and check if the printer works.

  Warning: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: You can turn off the Windows Firewall and see if you can print.

  1. Press the Windows key +X key.
  2. Select Control Panel.
  3. Click on the firewallof Windows .
  4. Select enable the Windows Firewall On or off on the right next to the sign.
  5. Select the radio buttons Turn off firewall under Private and Public network settings

  Warning: after reviewing the issue, turn on the firewall.

  Method 3: Refer to the suggestions for the following links.

  How to troubleshoot printing problems in Windows:

  http://Windows.Microsoft.com/en-us/Windows-8/How-to-solve-printing-problems

  Solve printer problems:

  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Hope this information helps and let us know the State of the question, we will be happy to help you.

  Thank you.

• Trying to install Canon lide 35 scanner under Windows 7

  Hey all,.

  How can I get incompatible with win 7 64 bit scanner to scan on win 7 64 bit?

  As indicated above, really;  I have a canon lide 35 scanner and canon said that it will not work on win 7 64 bit.  I tried compatibility mode, but it does not work.  I just heard talk try windows xp mode, but when I try to download who he wants to validate my system.  Itself is not a problem, except that it was all installed etc but I can not download win xp mode.

  As well; Please could someone tell me if its worth plow me on win xp mode?  If so how?  Or is there another way?

  Any help much appreciated.

  My system is a bit of windows 7 Professional 64 acer 6930 laptop running.  3 GB of RAM and dual core 2 GHz processor.

  Thank you

  Charlie

  Hi ccs001,

  Have you tried the drivers from the Canon Website?  Looks like there drivers for Windows 7 if it's your correct machine:

  http://www.USA.Canon.com/consumer/controller?Act=ModelInfoAct&tabact=DownloadDetailTabAct&fcategoryid=351&ModelId=10241

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Œuvres of CanoScan Lide 700F Scanner - but the software does not work

  Installed a CanoScan Lide 700F scanner. Through Windows Fax & Scan and can use it.  However the software provided, which allows to work when I first installed W7, now hangs.

  Canon support indicates that it is a problem with W7? I would like to use the software and there should be a solution please?

  The failing application name: mpnex21.exe, version: 2.1.1.0, time stamp: 0x49227b7f
  The failed module name: ntdll.dll, version: 6.1.7600.16385, time stamp: 0x4a5bdadb
  Exception code: 0xc0000005
  Offset: 0x00028c72
  ID of the process failed: 0xd38
  Start time of application vulnerabilities: 0x01caf73c57d95b7e
  The failing application path: C:\Program Files\Canon\MP Navigator EX 2.1\mpnex21.exe
  The failed module path: C:\Windows\SYSTEM32\ntdll.dll
  Report ID: 999d4e6a-632f-11df-96f1-0019665407d5

  Try to run the installation of the software in compatibility mode, and right on the configuration file and select 'troubleshoot compatibility '... Mike Hall MVP - Windows Desktop Experience http://msmvps.com/blogs/mikehall/

• WiFi lost with lid down

  Just bought a HP-15-G094SA laptop (laptop 15.6 "with Windows 8.1). Whenever I close the lid of the laptop, I lose the wifi connectivity.

  I checked the power settings to make sure that the wifi adapter is activated permanently. Also went to control panel-> network and sharing-> adapter change settings-> right click on wifi network connected-> properties-> configure-> management power - > uncheck allow the computer to turn off this device to save power.

  None of these solved the problem.

  I would use the laptop with lid closed by this pluggin thanks to my TV via a HDMI cable, but cannot because of the loss of wifi.

  Hello again Fil1404,

  It is good to hear from you again!

  Because changing the power settings in the control panel menu has not resolved your problem, I recommend you load the drivers software and hardware of origin provided with your computer. This can be done by following this document on the use of the Recovery Manager to restore the software and drivers (Windows 8). To update the drivers newly installed, please follow this document using HP Support Assistant (Windows 8).

  If the WiFi radio disables always after closing the lid, I recommended to perform a backup and restore of your operating system. This can be done by following this document on the backup of files (Windows 8), and more to perform a recovery of the HP (Windows 8) system. This should help get your system back to factory settings.

  If the problem persists, please call our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number.

  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html
  
  I hope this helps!
  
  Concerning

• How to set up an external monitor to display cell with lid closed?

  Hello

  I want to configure my new two external monitors to function as an extended desktop MPB lid closed, but am not clear how. What I see as I type this now is the screen MBP as usual, the external monitor to the right has the image of the desktop from my laptop but nothing else, and your screen to the left with the Yosemite stock to the image of the Sun and nothing else. They are connected by a Targus docking station, I guess that properly since both are alive and well.

  What I would do with lid closed is the screen to the left of the screen MBP and see right monitor as an extension of the left. I tried to close the laptop to see it would automatically migrate to the left monitor, but it does nothing.

  Your help is appreciated in advance.

  Paul

  In system/display Preferences, you can set to mirror or extend.  https://support.Apple.com/en-us/HT202351 if this does not work, you might have a problem with your connection.

• Http, https, ftp with error code 12007 problems.

  The problem started after a virus attached.  I use wifi on a series of mini laptop 1011 dell with Windows XP. I worked this problem via the internet with little or no help.  I used Malwarebytes to clean up.  I can't uninstall microsoft essentials.  It does not work and my firewall is disabled.  I can't install new software for safety due to being offline with the net.  Needs help!

  The problem started after a virus attached.  I use wifi on a series of mini laptop 1011 dell with Windows XP. I worked this problem via the internet with little or no help.  I used Malwarebytes to clean up.  I can't uninstall microsoft essentials.  It does not work and my firewall is disabled.  I can't install new software for safety due to being offline with the net.  Needs help!

  Restore the system to factory settings.

  Even though I know you love clean and keep all your installed applications to configure how they are and without having to restore your documents/photos/music/emails/contacts/bookmarks and others of your last backup - but the truth is that if you're having this much of the problems already - virus/malware that attacks you and infested/infected you probably had friends and probably did permanent damage.

  You can try to do a cleanse to get to a point where you can save some extra stuff.  Some of them you may need to use another computer to download stuff on and then transfer it on this machine.  At the end of the day - is the only way to be sure you're 100% 'good to go' has restoring factory.

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find.  Reboot when necessary.  (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  The less you have to run all the time, most things you want to run will perform:

  Use Autoruns to understand this all starts when your computer's / when you log in.  Look for whatever it is you do not know using Google (or ask here.)  You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory.  This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

  Do a house cleaning and the dust of this hard drive:

  You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

  Windows XP should take between 4.5 and 9 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

  If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
  http://www3.TELUS.NET/dandemar/spack.htm
  (Especially of interest here - #4)
  (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

  You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

  How to use disk cleanup
  http://support.Microsoft.com/kb/310312

  You can disable hibernation if it is enabled and you do not...

  When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

  -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
  -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
  -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

  You can control the amount of space your system restore can use...

  1. Click Start, right click my computer and then click Properties.
  2. click on the System Restore tab.
  3. highlight one of your readers (or C: If you only) and click on the button "settings".
  4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
  5. click on OK. Then click OK again.

  You can control the amount of space used may or may not temporary Internet files...

  Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

  -Open a copy of Microsoft Internet Explorer.
  -Select TOOLS - Internet Options.
  -On the general tab in the section 'Temporary Internet files', follow these steps:
  -Click on 'Delete the Cookies' (click OK)
  -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
  -Click OK.
  -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
  -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

  You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

  CCleaner (free!)
  http://www.CCleaner.com/
  (just disk cleanup - do not play with the part of the registry for the moment)

  Other ways to free up space...

  SequoiaView
  http://www.win.Tue.nl/SequoiaView/

  JDiskReport
  http://www.jgoodies.com/freeware/JDiskReport/index.html

  Those who can help you discover visually where all space is used.  Then, you can determine what to do.

  After that - you want to check any physical errors and fix everything for efficient access"

  CHKDSK
  How to scan your disks for errors* will take time and a reboot.

  Defragment
  How to defragment your hard drives* will take time

  Cleaning the components of update on your Windows XP computer

  While probably not 100% necessary-, it is probably a good idea at this time to ensure that you continue to get the updates you need.  This will help you ensure that your system update is ready to do it for you.

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx
  (Ignore the details and download the tool to download and save to your desktop, run it.)

  Reset.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
  (Download and save it to your desktop, run it.)

  Reset.

  and...

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your C:\ drive. After you register on the root of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

  Reset.

  Now reset your Windows with this FixIt components update (you * NOT * use the aggressive version):
  How to reset the Windows Update components?

  Reset.

  Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are updates and should work fine - it is only only one other thing you pouvez wish to make:

  Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.

  If you want, come back and let us know a bit more information on your system - particularly the brand / model of the system, you have - and maybe someone here can guide you to the place s x of law to this end.  This isn't 100% necessary - but I'd be willing to bet that you would gain some performance and features in making this part.

• Flash Player with Windows 7 installation problems

  successful installation of ADOBE FLASH PLAYER 64 - bit 7 WNDWS... HOWEVER ' AFTER a SHORT PERIOD OF TIME a LITTLE BOX CONTINUES the 2pop upward. I am told to update/install the new version of 'ADBYFLPLYER' SAID 'PROB of CONFIGURATION' or McAFEEINCOMPATIBLE Somethin Somethin? PLS HELP... I want to just wathvc some videos of the U2bd. UMkay.

  ...

  Uninstall * all * Internet plugins (Adobe Flash Player, Adobe Shockwave, Adobe Air, Adober Reader, Apple QuickTime, Real Player, Microsoft Silverlight, etc.).

  Reset.

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find.  Reboot when necessary.  (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  You can uninstall McAfee and replace it with something else.  There are several free options (Avira, Avast, AVG all come to mind) who will be probably better function and be less intrusive with fewer problems.

  -Download and install all the Plugins new Internet - directly from their respective web pages.

• I installed windows 7 and now my canoscan lide 50 scanner does not work.

  I installed windows 7 and now my canoscan lide 50 scanner does not work. Anyone know if it will be a windows 7 update driver to resolve this problem? If this is not the case, what scanner in the price of $80 will work on windows 7?

  http://social.answers.Microsoft.com/forums/en-us/w7hardware/thread/1afc4c13-551e-4372-8ecb-c16dfbfd442f/

  Here is the solution for the LiDE 50...

• Acrobat 11 Standard will not communicate with my printer/scanner

  Printer/scanner Epson drivers installed successfully.  Printing and scanning are possible for all platforms, but Adobe Acrobat Standard 11 won't find the scanner to create PDF files.  Any suggestions?

  Spoke with Epson and the problem is now solved.  We removed the scanner setting and set up a new scanner using the correct IP address.

  Thanks for your reply.

• I have a partitura with 18 instruments. Problem is that only 16 of the sheed. How can I vertically down the music?

  I have a partitura with 18 instruments. Problem is that only 16 of the sheed. How can I vertically down the music?

  Make a score set with 18 all instruments. Then use the scale parameter set score to all fit on a single page.

• I'm having problems to connect to internet with my iMac, no problems using my macbook pro in the same room, also see other peoples wifi appearing

  Having problems connecting to the internet with my iMac, no problems with my macbook pro in the same room, also seem to be picking up another Wi - Fi connection to others

  Go to > use Diagnostics wireless for you help to solve the problems of Wi-Fi on your Mac - Apple Support

• Charger Port with HP Slate 7 problems

  I bought the 7 Slate with Beats Audio May 19, 2014. I use the device for work and have video and photos stored on it. Last night the device was low on battery so I plugged in the charger and went on to have a conversation in an e-mail program. And without warning. the unit turned off and only would be cooler. I checked the charger on another device that takes the mini-usb, and it works fine. Use another charger and also directly from my office. Nothing. So, this morning, I get the question and found this forum.  Not very encouraging to see so many comments about it.

  This device is less than a month, and I got him with a lot of tenderness, never fell, only not negligent on the load, or the cord. Yet here I am without my camera and unable to use for my meetings. Cannot get my sync applications, such as e-mail, storage, ect.

  So I called HP Support at 1-800-474-6836 and reached (Ben), me who gave me the standard excuses, transferred to a supervisor (Lexi), who created the wait to be contacted by a case manager within 48 hours. I was told that this person, once they contact me, will offer the best solution to solve the problem and return the unit to me or replace it. I was given a case number and am waiting for the call.  It occurs to me that if there is that a lot of problems with the charger port, that the company should already obtained before this problem and had a dedicated support to maintain the retention. My time is precious, like everyone else! I understand that my product is under warranty, and there is a process to resolve these issues. But when these factories will understand that it is more than an inconvenience when they design and sell defective devices? My Home Office everything is lined with HP hardware. My only loyalty should be of significant value for them.

  So I am writing this message to maintain continuity with this community, and HP doing to address this issue. Make sure what I'm going to share the results, whether good or bad. And as a former journalist, who does not hesitate to produce a video describing this experience, knowing very well how to avoid libel and defamatory statements.

  Technology companies have made the fortune of products driven by the needs of consumers and of course the almighty dollar. But seems that has more NO integrity in the prevention of these problems don't occur in the first place. And once they do, consumers are reduced to a minimum, having to go through the hoops to just to be able to use a product they paid for. Prove me wrong! You want to be a leader in the industry? Show me things beyond to satisfy your base.

  I will update this issue as soon as I have something else to the case.

  Thus, an update!

  After a few messages for me that my information was sent to the front. I got a call from (M Miles) Corporate Tuesday afternoon. (Same day)  And after a long discussion on my frustration, both with regard to the problem happen with any replacement.  I agreed to let them replace the device with the slate update 7 beats Special Edition. I sincerely believe that Miles was friendly to my problem and that he would do everything he could to resolve the issue and keep my business of loyalty.

  I was expressing my concern that anyone would after learning that he is a typical problem for the type of charger Port.  If there is a known issue, why use this type? Find a more stable tool, so save the company, but also consumers headaches of loss and replacement altogether.

  I'm looking forward to having a device back in my hands for the work I do. Not a toy for me! If there are other problems with replacement. I'll revisit this post and report it.

  With respect in Miles and anyone who touched the case... Thank you for your prompt and considerate back how to solve my problem. I can't wait to receive my new camera, with fingers crossed. I never wanted another product in addition to HP.

• I play world of warcraft and use a program called ventrilo to talk with other players. the problem I have is my game sounds can be heard

  I play world of warcraft and use a program called ventrilo to talk with other players. the problem I have is my game sounds can be heard.
  Vista makes my headphones 'speakers', so when I use a program called ventrilo to talk with other players in my game sounds are heard through ventrilo. My headset is a headset/microphone generic plug-and-play.

  When I run not WoW, I can hear my own voice through the headset speakers when I talk.

  I want my headphones to work so I can hear my friends talking and the sounds of the game, but I don't want the game sounds to be filtered on the server for voice chat

  Any help would be much appreciated. I asked the same question to Geek Squad and their response has been to try to charge me $49.99 + tax for one of their "agents" can remote in and fix it. Do not use them unless you have: P

  Hey CassiusVa,

  Welcome to the Microsoft Answers Forum!

  Since when are you facing the issue?

  Can I know the version of Ventrilo you use on your computer?

  It may be that World of Warcraft focuses on your audio hardware.  You can try to reduce the audio settings in WoW to see if this makes the use of Ventrilo better.  It may also be a driver problem.  I would check to make sure that you have the latest drivers for your audio device.

  Use the following steps to ensure that the audio drivers are up to date.

  1. connect to the Internet.

  2. click on start and enter the Device Manager in the start search field.

  3. click on the plus sign next to sound, video and game controllers.

  4. right click on the name of the sound material and select software update of the driver...

  5. click on search automatically for a driver updated and wait for Windows to update the driver software.

  6 Windows checks a remote Web site to see if the update of the driver software is available.

  * If an update is available, let Windows install the update.

  * If an update is not available, proceed to the next step.

  7. once the update is successfully installed, test the microphone.

  Please follow the steps below and check if you still have questions echo.

  Go into Ventrilo Setup and select mixer for the sound card, which will be the audio input (as determined by the "Input device" option) device. This will populate the Mux and line options. Normally it would take only a Mux. It is possible that you may have many options of the line. Go ahead and select "Microphone" or anything that is appropriate for the input line and then click OK.

  This should solve the problem.

  Please note that you select mixer, mux and line will allow the "Hardware Volume" slider This gives you the control hardware on the audio input signal and is the best way to control how strong you are. Setting the cursor to halfway better seems to work for most people, but it will be hardware and system load.

  You can also browse the links for more information on ventrilo and try to contact them if the problem persists.

  http://www.Ventrilo.com/FAQ.php

  http://www.Ventrilo.com/about.php

  http://www.Ventrilo.com/dlprod.php?id=1

  Let us know how it works.

  Kind regards
  Technical support of Microsoft-yama.
  Visit our Microsoft answers feedback Forum and let us know what you think.