FAX FORWARD TO EMAIL HP LASERJET 4345 MFP

Similar Questions

• Printer HP LaserJet 4345 MFP network

  Hi I have a HP Pavilion 17 e100sv F5C73EA and a HP Pro AIO 3250 D1V71EA both 8.1 and 64-bit windows.

  I connected them with my HP LaserJet 4345 MFP network printer and after some time, it disconnects.

  I tried the solution with doctor's CV, but I still have the problem.

  Another solution?

  Thanks in advance

  To get your question more exposure I suggest you post in the trade forums since it is a commercial product. You can do it at Business Forum.

  I hope this helps!

• Unwanted fax confirmation pages for faxes received on HP LaserJet 1536dnf MFP

  I would like to disable the confirmation pages for faxes received on my HP LaserJet 1536dnf MFP but keep the pages of confirmation for faxes sent. How can I do this?

  It is not too difficult.  Press Fax Menu button.  Tap the right arrow until that fax reports is on display (should be the first thing that pops up), then tap OK.  Press the right arrow until Fax of Confirmation is displayed (again, it should be the first thing that pops up) and press OK.  Press the right arrow until you see Send Fax only and press OK.  Now you should be set to get reports of confirmation only when sending.  Hope that helps.

• Control Panel on the missing Laserjet CM3530 MFP as workflow, Email and other features

  Need help with my HP Laserjet CM3530 MFP.

  The control panel is missing icons for E-mail, workflow and more.  I can go into the configuration of the printer and to the title of the homepage configuration screen, select this option to display all the (copy, Fax, Email, Workflow, file network, storage of work, jobs preserved, alternate Job Status email, Status and Administration supplies).  The only icons that will show are copy, Fax, the status of the work, jobs, status and Administration supplies storage.

  In Authentication Manager, all the options are set to NONE.

  I tried to turn them on and off and restart the printer after each change, but so far nothing I tried worked.

  How can I get the control panel to display all the icons?  Y at - it a reset without actually reset the printer?  And reset the printer to the factory actually work?

  Thank you.

  Stan.

  I'll post the fix here for people who are looking, as I touched on what I had to do to get it fixed

  Play on the webgui printers interface and try to configure the scan to e-mail, the wizard did not work.

  1. updated the firmware (still no e-mail option)

  2A ran the Config Wizard and scanning configured for Email (without option of email)

  3. restarted (Email option is now here)

  It is at that moment that if the option did not show upward, I would do a factory config reset and see if she would come back.  Fortunately, I didn't have too.  However, Workflow, network, storage of the work and secondary E-mail folder still do not appear, but are not necessary, so I don't worry about them right now.

• HP LaserJet M1536dnf MFP stores the faxes to be sent the

  The company that I work has two HP LaserJet M1536dnf MFP Copier/printers-faxes. They are configured as basically the same that each related to its own line of ananlog fax. One of the machines is a continuous problem where it starts to store faxes instead of sending them.

  I went through all the HP troubleshooting documents. All settings have been verified. Firmware has been updated to the latest version. When I run the fax test via the service menu, always happens on all points.

  The machine receives faxes fine, but when you try to send a fax, it stores and never sends it. Following the troubleshooting documents HP, 02/11/12 I restored by default. After that, the machine was able to send faxes normally do not their storage. On 09/11/12 machine began to store faxes rather than send them again. Today, 15/11/12 I restored default again, and the machine is able to send faxes again.

  I have not the time to be constantly dealing with this issue. Why does the machine start storing faxes instead of sending them? How to prevent it from recurring? Should the machine be returned? Please do not direct me to a generic help document that I have already read. Thank you.

  I would contact HP directly on it. It may need to be replaced, or it may just need some deeper resets. Their Laserjet experts know that go with this problem. I would wait until the problem returns to the top to call, because they will tell you to do if you call while it works very well. If you are still in warranty, HP can replace the printer without cost to you. I'll link the information to get in touch with them below. The link takes you to a form to fill out. Once you fill it and she is treated, it will give you the printers warranty information, a file number and the phone number to call.

  HP Technical Support call case form:
  http://goo.GL/w7Hgh

• HP LaserJet M1536dnf MFP responds automatically faxes

  My new HP LaserJet M1536dnf MFP does not automatically fax calls.  I don't have a phone hooked or a voice mail/answering machine.  "Answer Mode is"Auto".

  We use an analog converter to connect to our internal digital VOIP phone system.  Prior MFP which was connected has not had problems with answering machine/printing faxes.

  I can see "Incoming" call on the screen, but it just rings and rings.  If you press the button "Start Fax" when it rings, then he will proceed to the connection and receive it, it finally drops the call.  It's not good to see many faxes come when the office is closed or otherwise unattended.

  I tried setting "Fax / such", but that no longer works.

  Help, please!

  Thank you very much!!!

  Hi @DW - OH,.

  I see by your post that faxes will not come by when it is set to auto or Fax / Tel, but manually, you can receive the fax. I can help you with this.

  Update the firmware of the printer.

  HP LaserJet Pro M1536dnf multifunction printer drivers.

  Select your operating system, click Next, click the link for the firmware.

  Please check your messages for the reset of the printer, I saw that solve this problem before.
  In the forum next to your handle name simply click on the envelope to see.

  Good day!
  Thank you.

• 100 HP LaserJet color MFP M175: scan to the PDF Format

  Hello

  While using the scanner of HP LaserJet 100 color MFP M175a I don't get an option to save the file in PDF format. I use a scanner through Windows Fax and Scan. Kindly help

  Hey @HBootwala,

  Welcome to the Forums of HP Support!

  I see you are trying to scan PDF documents of your 100 Laserjet color MFP M175a printer to your computer for Windows 8.1. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once that is done, scan, you want to scan using HP Scan, rather than Windows Fax and Scan. You can download the latest version of HP Scan by clicking this link. Once installed when you need to scan, you can open the program and select this option to save your document in PDF format.

  Please let me know if this solves your problem by clicking on accept solution. If you still have questions, please let know what happened during the installation of your software and I'll be better able to help you. If not, have a great day!

• None detected Fax (00:43 dry timeout) with M1319f MFP

  I use a LaserJet M1319f MFP.  I can receive faxes, for example of HP testing service.  However I have several "No fax detected" errors each week.  The duration is always 00:43 seconds.  The firmware is updated, none of these recent changes.  The MFP is autonomous, so I don't think that operating system is a problem.  (I'm running Vista, but I'm not connected).  I changed the slower speed setting.  No idea what could happen?

  Something to consider too is that there may be nothing wrong with your machine, if you have no problems receiving with the fax service or in sending faxes, there is a good chance the issue that you are experiencing is not a problem with your fax.

  Just as I explained you may have problems to send depending on your configuration, this applies also to people sending faxes for you. There is a possibility that their configuration is not optimal and their faxes are partially transmitted.

  I hope this helps!

• Question of LaserJet M1319f MFP Installation on Windows 7

  Dear HP team and community members to support,

  I am currently trying to install HP LaserJet M1319f MFP connected via USB on Lenovo Q190 machine /Intel Core i3 processor / freshly installed running Windows 7 Enterprise 64-bit with Bulgarian language pack, all updates, Microsoft Forefront Protection/i also tried to disable the real-time protection /, UAC disabled, account administrator, IE 11, .NET Framework 4.5.1.

  The priter work properly with Windows XP.

  I downloaded the package of driver here: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=bg&dlc=en&sw_lang=&product=3547...

  After reached installation process 'Copy of the files on the hard disk' stage Setup returns error software install printer no longer works.

  I tried to run with Windows XP SP3 compatibility mode or administrator privileges, but the same error occurs.

  I tried Microsoft Fix It software to install/uninstall drivers too, but without success either.

  I cleaned up the temporary files and Max about 10 to 15 times.

  Windows update is not help with drivers too.

  I tried to extract the Installer files and manually add the printer and received the error that the installation was not successful and it says below the file is not found / if I remember it well.

  After that I tried the HP Print and Scan Doctor software, but it shows that there is no driver installed and redirect me to the driver download page.

  I tried the Assistant driver software also, but it returns that this model is not supported.

  I tried to change the Startup Windows "Selective startup" with "Load Startup items" unchecked and all non-microsoft disabled services, but without success.

  Under safe mode that will not accomplish the install because the print spooler service does not, which is running normally otherwise.

  The "ntprint.inf" file is present in the folder 'Windows\inf', HKLM\SYSTEM\CurrentControlSet\Control\Print\Enviroments\Windows NT x 86 registry has only subkeys drivers and print processors and the HKLM\SYSTEM\CurrentControlSet\Control\Print\Monitors registry has only Local Port, Microsoft Shared Fax Monitor, monitor the Standard TCP/IP Port, USB and WSD port subkeys.

  The Windows\System32\spool\PRINTERS and Windows\System32\spool\drivers\W32X86 folders are empty.

  I ran sfc/scannow in cmd with administrator privileges, but there was no violation of integrity.

  I tried to disable the IE component, but no luck either.

  So now I'm out of ideas how to connect that * bleep * thing... I hope someone can help me with this problem.

  "Hewlett PackardHP LaserJet M1319f MFP" currently devices without driver installed in Device Manager /Hardware ID USBPRINT\Hewlett-PackardHP_La28A1 and Hewlett-PackardHP_La28A1/ and Scanning HP /hardware ID USB\VID_03F0 & PID_5817 & REV_0100 & MI_00 and USB\VID_03F0 & PID_5817 & MI_00.

  I forgot to mention that I tried all kinds of variations with these solutions with or without connected printer.

  Thank you very much in advance for all type of guidelines.

  Best regards

  Ivan

  P.S.: at least, I think that I managed to collect all related solutions in this topic...

  Dear Gemini02,

  After a few days of trying different types of solutions, I finally managed to install the printer as a network device.

  So basically, I also had a problem (error 0 x 002) with the installation of the printer as a network printer. Restart the Printer Spooler service has not worked and erase cache files did not work either.

  So I installed x 64 driver on the host machine and then installed the network printer. For those who do not know how to install x 64 drivers:

  -Download the drivers from the official HP support page

  -Check out the *.exe file in a folder (if you don't have additional archiving program replace *.exe with cover and unzip it with the build Manager). Navigate to the folder 'x 64' and extract the file "LJM1319L.cab" to separate the folder.

  -Go to 'Printers and faxes' ("devices and printers" in Windows 7 ")

  -Then right click on the shared printer already and click on 'Properties' ("printer properties" Windows 7 ")

  -Click the 'sharing' tab and click on "additional drivers".

  -Select 'x 64' or only ' IA64"in the case that your hardware architecture is demanding and click 'Apply'.

  If you have already installed the drivers, the rest is not relevant, but if you do not:

  -Open the extracted folder and select the file "HP1319fp.ini" (if it returns select error 'HPM1319.ini')

  -When he asked the second time pilot open 'x 64-> LJM1319L' and select the *.dll file

  -on the third request for drivers go to 'x 64 English-> PrntDriver' and select 'ZSD1319P'.

  I couldn't try to connect and install by USB (the office that I am taking care, as if it were new post more), but after the successful installation of the drivers that the printer connected locally should also work perfectly.

  So I hope I was help someone like me about this and still do not understand why I should have done everything for installation driver simple?

  Best regards

  Ivan

• HP Color LaserJet M177fw MFP Pro - support PostScript?

  Hello

  I am looking to buy a new printer/scanner/copier(/fax is a nice to have, but not mandatory), and I am deciding between the following models:

  HP LaserJet Pro 100 color MFP M175nw

  HP Color LaserJet M177fw MFP Pro

  PostScript support is important to me, and I know that the 175 has it.  However, I'm not sure I know the 177, even after digging through several web pages and documents.  Here's what I found:

  -The page of the main form for the 177 says that he accepts "Cffp.  I'm not familiar with this variant PCL, so I don't know how it compares to PCL5 or PCL6, etc..  I have been unable to find more information about "Cffp.

  -The 'Software' section of Page 2 of the PDF Datasheet for the 177 mentions the driver "HP PostScript".  This is the only place where I saw no potential indication that the 177 supports PostScript.  This article also mentions a driver "PCLmS".  I couldn't find more information about "PCLmS".

  -The user 's Guide the 177 refers only to PostScript in an article that refers to ePrint.  However, it does not imply that the 177 itself supports PostScript.

  -Page product specification (in the Support section of the HP site) for the 177 has a "Print Specifications" section which lists only "PCL3 GUI" next to "languages of device.

  I'm guessing that the 177 is not compatible PostScript, but someone has the more definitive information?  Also, is there a description of the Cffp / PCLmS somewhere?

  Thank you!

  Hi Clent

  Here is some information on both printers.

  Here's a url for the printer for Color LaserJet MFP M177fw Pro specifications

  http://support.HP.com/us-en/document/c03901180

  Data sheet also.

  http://www.shopping.HP.com/shopping/PDF/cz165a.PDF

  Fonts and fonts depends on fonts and fonts in OS.

  Print language

• Can not copy or scan of FDA (autofeed) on LaserJet 127fn MFP

  You just bought a LaserJet MFP M127fn Pro and the document feeder makes a cracking noise. The copies come out blurred from the ADF. Sometimes, I get a message to mispick or paper the ADF is not detected

  Hey @MarthaContreras,

  Welcome to the Forums of HP Support!

  I understand that you feel the paper and quality problems when you use the automatic document feeder on your MFP HP LaserJet Pro M127fn. I would like to work with you today with the resolution of this problem.

  It sounds like this problem is a failure to roll in your ADF assembly. This can cause problems with the paper feed, paper detection and quality. Please follow the steps below to resolve this issue.

  Step 1: Check of power:

  Make sure your printer is plugged directly into a wall outlet for power. Power strips and surge protectors can cause printers lack power and will not work properly. To make sure that the power is not the problem, please connect your printer directly into a wall outlet and test the copy feature.

  Step 2: Checking for jams ADF:

  Any packaging, paper or debris that are stuck in your ADF may cause problems of multiple streams with all CAD on your printer. To ensure that this is not the case I can get you click here and browse the steps to ensure that no debris is stuck in the rollers of the adf.

  If the adf is free of all debris, proceed to the next step.

  Step 3: Check paper:

  Ensure that you are the copy, fax or by scanning ordinary white paper. Make sure that the paper is not creased or damaged in any way. Load paper carefully stacked in the automatic document feeder. Also, ensure that the paper guides are adjusted and the adf cover is closed tight.

  The printer will normally make a "ding" sound or display 'original charge' or "document loaded" on the display of your printer to show that the paper in the adf sensor detects paper as load. If no "ding" or "document loaded" message appears, remove your paper slightly and push back into the Assembly of the adf to see if you can trigger the adf sensor to detect the loaded paper.

  Once the paper is detected, please test the copy function to see if the study draw in evenly and prints a perfect copy. If the problem persists, please continue.

  Step 4: Checking Firmware:

  A programming failure or corruption on your printer can cause the material on your printer does not work properly. To make sure that you use the most recent Version of the Firmware programming on your printer, please click on the following link: HP LaserJet Pro MFP M127/M128 series Firmware update

  Once the site opens, select the download button in the upper left corner. Once completed the Firmware download to run. Follow the prompts on the screen to send the update of the Firmware for your printer.

  Once the update is complete, test the copy function again.

  Please reply to this message with the result of your troubleshooting. Good luck!

• HP Laserjet M1319F MFP is not able to scan under Windows 7 (64-bit at home)

  I have a Windows 7 Home Premium 64 - bit HP Pavilion connected to the HP Laserjet M1319F MFP. All the functions of the printer worked so far.

  The scan function has stopped working. Here are the steps and errors that I see:
  1. I load the sheet from which I scanned in the printer and the printer displays
  2. I start Windows Fax and Scan dialog box and press the button new scanning
  3. New Scan, dialog and I press the Scan button
  4. the printer begins to feed the sheet and displays
  5. immediately after the message that the printer displays the message
  6. a message with the dialog box titled error, and after I press OK another dialog box with Windows Fax and Scan title pop-up.
  I did the following steps to try to fix the scan:
  1 uninstalled the printer and it added. Scan still does not work.
  2. I downloaded the latest driver and firmware on HP site updates and installed on the PC and on the printer firmware. I had success on the driver and firmware of the facilities. Scan still does not work.
  3. I ran PC-Doctor hardware diagnostics on the printing device and got a status of success. The Test page printed successfully.
  4. I am able to print documents, but will not scan. I tried both ways - single and multiple - sheets. Scan still does not work.
  Any suggestion would be appreciated.

  Hi ApolloWZ,

  Thanks for your quick response.

  In the meantime, I found the solution to my problem, so I thought I'd share it here for others.

  I found the answer here:

  http://h30434.www3.HP.com/T5/scanning-faxing-and-copying/can-t-scan-from-M1536dnf-after-reformatting-computers/TD-p/3914820

  I will cut & paste the answer below, in which case the link above doesn't work at some point:

  (1) on the computer target under the normal user account, press Start, in the search box type services.msc. Right click on the program that appears and select "Run as Administrator". Enter your user password or click on next to go to the UAC popup, if necessary.
  (2) locate the service called "Windows Image Acquisition (WIA)" and double-click it.
  3) click the connection tab, and then change this service to log on under a Local System account. Click here to allow the service to interact with desktop. And then click OK.
  (4) reboot (or if you really don't want to restart & know what you're doing, you can just stop & restart the WIA service twice)

  See you soon,.

  Gary.

• How can I fix the problem that when you reply or forward an email, the police in the e-mail becomes very small?

  All of a sudden, when I reply to or forward an email, the police in the e-mail becomes VERY SMALL! How can I get that back to regular size?

  I found an add-on, which worked. in response to police of someone else's problems.

  https://addons.Mozilla.org/en-us/Thunderbird/addon/theme-font-size-changer/

  Just follow the directions.

• Driver for HP LaserJet M1005 MFP for Windows 7

  Could not find driver for HP LaserJet M1005 MFP for Windows 7 please help soon

  @jayadurgacranes

  This product is supported by a plug-and-play printing and scanning to the driver which can be found here:

  product page M1005

• LaserJet pro 177: bought used hp color laserjet pro mfp m177

  Installation disk arived broken. How can I do to replace it.

  Just upload what you want the site web theHP.

  http://support.HP.com/us-en/drivers/selfservice/HP-Color-LaserJet-Pro-MFP-M177-series/5303438/model/5303443