FAX IP service inbound routing problem

Similar Questions

• Fax and scanning of Windows problems

  I can't get windows Fax and Scan to scan documents in black and white.

  I gives me the possibility of Documents, Photos and the last settings used in profile, but when I try to select the color Format, the only option I get is color (No black and white and not gray scale)

  I can't find this particular issue addressed anywhere and no resolution.

  Hello

  Thanks for posting your query in Microsoft Community.

  You can try one of the methods is to turn off and then turn on the Windows Fax & Scan service. Doing so is like the disconnection of the existing facility and its replacement by a new. I suspect that there is something abnormal in the current installation.

  Here's how:

  Click on 'Start' ---> ' Control Panel ' ---> 'programs and features' and in the left pane, click on "Turn on or off windows features". Give time resulting from the box to complete and scrolling down to "Print and Document Services" and to extend it by clicking on the '+' sign. Uncheck the 'Windows Fax & Scan'box and click on 'OK'. Follow the prompts if necessary and wait until the course ends.

  Reverse the process by checking the box to reinstall Windows 'Fax & Scan ". Now try again to accomplish the task of setting up a new account.

  Configure your computer to send and receive faxes

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• Routing problem between the VPN Client and the router's Ethernet device

  Hello

  I have a Cisco 1721 in a test environment.

  A net 172.16.0.0/19 simulates the Internet and a net 192.168.1.0/24 simulates the net, the VPN tunnel must go to (intranet).

  The net 172.16.0.0 depends on the router 0 FastEthernet, Intranet (VPN) hangs on Ethernet 0.

  The configuration was inspired form the sample Configuration

  "Configuring the Client VPN Cisco 3.x for Windows to IOS using Local extended authentication"

  and the output of the ConfigMaker configuration.

  Authentication and logon works. Client receives an IP address from the pool. But there's a routing problem

  side of routers. Ping client-side - do not work (the VPN client statistics that count encrypt them packets, but not to decrypt).

  Ping the router works too, but decrypt and encrypt customer statistics in VPN packets count progressive

  (customer has a correct route and return ICMP packets to the router).

  The question now is:

  How to route packets between the Tunnel and an Ethernet device (Ethernet 0)?

  conf of the router is attached - hope that's not too...

  Thanks & cordially

  Thomas Schmidt

  -.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.- snipp .-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.

  !

  version 12.2

  horodateurs service debug uptime

  Log service timestamps uptime

  encryption password service

  !

  !

  host name * moderator edit *.

  !

  enable secret 5 * moderator edit *.

  !

  !

  AAA new-model

  AAA authentication login userauthen local

  AAA authorization groupauthor LAN

  !

  ! only for the test...

  !

  username cisco password 0 * moderator edit *.

  !

  IP subnet zero

  !

  audit of IP notify Journal

  Max-events of po verification IP 100

  !

  crypto ISAKMP policy 3

  3des encryption

  preshared authentication

  Group 2

  !

  ISAKMP crypto client configuration group 3000client

  key cisco123

  pool ippool

  !

  ! We do not want to divide the tunnel

  ! ACL 108

  !

  Crypto ipsec transform-set esp-3des esp-sha-hmac RIGHT

  !

  Crypto-map dynamic dynmap 10

  Set transform-set RIGHT

  !

  map clientmap client to authenticate crypto list userauthen

  card crypto clientmap isakmp authorization list groupauthor

  client configuration address map clientmap crypto answer

  10 ipsec-isakmp crypto map clientmap Dynamics dynmap

  !

  interface Ethernet0

  no downtime

  Description connected to VPN

  IP 192.168.1.1 255.255.255.0

  full-duplex

  IP access-group 101 in

  IP access-group 101 out

  KeepAlive 10

  No cdp enable

  !

  interface Ethernet1

  no downtime

  address 192.168.3.1 IP 255.255.255.0

  IP access-group 101 in

  IP access-group 101 out

  full-duplex

  KeepAlive 10

  No cdp enable

  !

  interface FastEthernet0

  no downtime

  Description connected to the Internet

  IP 172.16.12.20 255.255.224.0

  automatic speed

  KeepAlive 10

  No cdp enable

  !

  ! This access group is also only for test cases!

  !

  no access list 101

  access list 101 ip allow a whole

  !

  local pool IP 192.168.10.1 ippool 192.168.10.10

  IP classless

  IP route 0.0.0.0 0.0.0.0 172.16.12.20

  enable IP pim Bennett

  !

  Line con 0

  exec-timeout 0 0

  password 7 * edit from moderator *.

  line to 0

  line vty 0 4

  !

  end

  ^-^-^-^-^-^-^-^-^-^-^-^-^- snapp ^-^-^-^-^-^-^-^-^-^-^-^-^-^-

  Thomas,

  Can't wait to show something that might be there, but I don't see here. You do not have the card encryption applied to one of the interfaces, perhaps it was not copied. Assuming your description you do it, or should it be, applied to the fa0 and you are connected. Try how you ping? Since the router or a device located on E0? If you ping the router, you will need to do an extended ping of E0 to the ip address of the client has been assigned. If your just ping the router without the extension, you will get sales and decrypts that you declare on the client. Have you tried to ping from the client to interface E0? Your default route on the router is pointing to fa0? You have a next hop to affect? You have several NIC on the client pc? Turn off your other network cards to check that you don't have a problem with routing on the client if you have more than one.

  Kurtis Durrett

• Fax IP service in the unit

  The service that manages faxes in the unit actually changes the faxes to something like IPM message class. Note.Fax?

  Yes, when he sticks the message in the Inbox, it sets the message class and various other MAPI extended attributes such as media flags and others so that the unit will pick it up as a fax to the phone.

  NOTE: We need to free the fax service IP updated current week if QA says it's OK - he has the ability to route inbound and outbound IP faxes and route incoming emails with attached as voicemail WAV files (that is, it will define the appropriate MAPI properties and report it as IPM. Note.Voice.Unity such as the unit will resume as a voicemail message). I drop a note here about it as soon as he is ready to roll.

• BEFSR41 router problem

  Hi, recently I had problems with my router, it does just what it's supposed to.  I am sure that is not a mechanical problem, see how it lights up the same that always, all bulbs are working on the screen and it recognizes that it has an internet connection.

  When I plug it into my computer, the network will find and say that I am connected to the internet.  When I try to do something that requires the interent on the computer or the Xbox, it still fails.  No web pages only, no games, nothing. I checked my network connections in Control Panel and it says I'm connected, data are sent, but none is received.

  I checked all my ethernet cables, made sure there is no damage to one of them, so I can't be them.  I tried to unplug the modem and router for a bit, then plug them back in and then tried to hit the reset button on the back of the router.  I think that could of causing the problem, but I can't say with certainty.

  Someone knows what to do?

  Reset the router properly and then re - configure...

  Press and hold the button of reset for 30 seconds... Release the reset button... Unplug the power cable from your router, wait 30 seconds and reconnect the power cable... Now re - configure your router...

  If your Internet Service is cable follow this link

  If your Internet Service is DSL follow this link

  For xbox do this,

  Open an Internet Explorer browser on your computer (desktop) wired page. In the address bar type - 192.168.1.1 and press ENTER...
  Let the empty user name & password use admin lowercase...

  Click on the tab "Games and Applications" and then click the sub-tab "Port Range Forwarding"...

  (1) on the first line in the box, type Application in ABC, in the start box, type in 53 and the type of box in 53, leave the Protocol as and under type 192.168.1.20 ip address and check the box to enable...

  (2) on the second line in the box, type Application in PQR, in the start box, type 88 and type of box in 88, leave the Protocol as and under type 192.168.1.20 ip address and check the box to enable...

  (3) on the third line in the box, type Application in XYZ, in the start box, type in 3074 and end in 3074 box type, leave the Protocol as and under type 192.168.1.20 ip address and check the enable box and click on save settings...

  (4) once you return to the game to the top page, click the Security tab and uncheck block anonymous Internet requests and click on save settings...

  5) click on Setup and change the size of the MTU to 1452 and click on save settings...

  (6) address IP, Goto settings XBox network settings and assign the following on your Xbox and select manual IP settings
  IP address:-192.168.1.20, subnet mask:-255.255.255.0 default gateway:-192.168.1.1...

  (7) also assign addresses DNS on Xbox
  Primary DNS:-4.2.2.2... Secondary dns:-192.168.1.1

  (8) turn off your modem, router and Xbox... Wait a minute...

  (9) plug the power to the modem first, wait a minute and plug the router power cable, wait another minute and turn on the Xbox and... test it connects...

• Cisco 871 routing problem

  Hello.

  I have a Cisco 871 router with this network diagram

  10.218.10.117 host - 10.218.10.118 4 | CISCO 871 | 172.18.122.5-FE0 - 172.18.122.6 host

  I want the 172.18.122.6 host can do ping to the 10.218.10.117 host at the other end of the router, but its does not work, what is the problem with this config? could someone give me a hand?

  With the help of 1222 off 131072 bytes

  !

  version 12.4

  no service button

  horodateurs service debug datetime msec

  Log service timestamps datetime msec

  no password encryption service

  !

  hostname ALCALÁ-CNT-UIO

  !

  boot-start-marker

  boot-end-marker

  !

  enable secret 5 XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX

  activate the password XXXXXXXXXXXXXXX

  !

  No aaa new-model

  !

  resources policy

  !

  IP subnet zero

  IP cef

  !

  !

  !

  !

  !

  !

  interface FastEthernet0

  !

  interface FastEthernet1

  !

  interface FastEthernet2

  !

  interface FastEthernet3

  !

  interface FastEthernet4

  IP 10.218.10.118 255.255.255.252

  automatic speed

  full-duplex

  !

  interface Vlan1

  IP 172.18.122.5 255.255.255.0

  !

  router RIP

  redistribute connected

  10.0.0.0 network

  network 172.18.0.0

  !

  IP classless

  !

  !

  no ip address of the http server

  no ip http secure server

  !

  Dialer-list 1 ip protocol allow

  !

  !

  control plan

  !

  !

  Line con 0

  no activation of the modem

  line to 0

  line vty 0 4

  password XXXXXXXXXXXX

  opening of session

  !

  max-task-time 5000 Planner

  end

  Better compliance

  The f

  Jeff,

  Each host can ping their side? You have default gateways configured on the hosts?

  HTH,
  John

  Please note all useful messages *.

• Unable to connect via the wireless router "problem with wireless adapter or access point" _

  Hello

  I recently replaced my old Toshiba laptop with a new model of Toshiba Satellite L500/033HNX, it installed Windows 7.

  The problem is that I can't connect to my wireless network. I am currently connected via Ethernet cable to my Linksys router.

  I had help from my internet service provider, the installation correctly the problem not because of the connection.

  I had a Linksys online support, the router is a wireless, model - WAG54G ADSL gateway, is not the problem of all the correct settings and other devices can connect via my wireless network. I ran Dr. connectivity several times and it is always impossible to connect, "problem with the wireless adapter or access point.

  OK, you're my next hope to solve the problem can you HELP Please!

  Hi, JoelbX
  I want to thank very you much for your support and effort do to help me solve this problem, but we receive have been, and I don't want to waste any more of your valuable time, so I am the son of closing and deleting of Tring in Microsoft Answers.
  All the best
  Tring

• OfficeJet 6600 e-all-in-one: Wireless connectivity with the new router problem

  We had the printer since 12 months, workin with no problems.

  Just got a new modem/router (NETGEAR V7610) installed as part of the NBN implementation and I can't get the printer to connect to the new router. 5 and 2.4 G active networks. The two defined newtorks on security WPA2-PSK [AES].

  The printer detects the wireless (2. 4 g) network, but can't coplete the connection. Tried the two direct input the network key and using WMA.

  -The display panel shows "wireless invalid password (WPA) is entered.

  -The results of network printer test page indicates a FAILURE on safety.

  I was able to connect to multiple other devices (laptop, iphone, Kindle...) without any problem. Used the two direct entry of the key network and WMA.

  Anything else I can try?

  Find a new update of the firmware for the printer (May 9, 2016).

  After you apply the update, the printer is able to connect to the new modem.

• Satellite A100-014: connection Wireless D-link router problem

  I think that it is working properly. I keep getting kicked from WLAN (connected to the dlink DWL 900AP), but if I plug the Ethernet cable it works very well.

  This vista software is a major pain. It will let me install the d-link software.

  Does anyone have any knowledge about it?

  If you need the d-link software you must ask the manufacturing of router for these updates or visit the support site for manufacturing.

  What WLan encryption are you using? I used WPA2 and I had similar problems.
  My router and the wireless network card were not 100% compatible with this encryption.

  Now I use the WPA or WEP and it works.

• Time Capsule router problems

  Recently, my wireless network has had problems.  He became more and more slow.  My devices connect without problems and the signal is full but it takes significantly more time to do something about it.  My iMac doesn't seem to have problems but are my other devices (phone, Tablet, PS3, PS4).  Netflix is essentially very bad because it keeps buffering every 30 seconds and I have to run PS4 upgrades must run all night because they take 8 + hours to download.  I had questions about 5-6 months, which I was able to correct by closing all the way down, 20 minute wait and then turn the modem, the router, and then the computer.  I tried again twice, but he don't seem to have any effect.

  My modem is a Motorola Surfboard SB6141.

  My router is a time capsule, model A1409.

  iMac is a model 27 inch late 2009 10.10.5 running.

  The capsule is connected directly to the modem via Ethernet.  All other devices are connected to the wireless network.  Any advice would be greatly appreciated.

  Thank you!

  Something directly connect to the modem by ethernet. And do a test to see if download and shipping limits are together and working properly.

  You must turn off the modem at each change of customer... 5 minutes is probably enough, but this can take up to 15 minutes.

  If you have good speed then when you put the back... TC test via ethernet to TB... once again, you should get almost the same download and upload speeds as the test to the direct modem.

  Now, test your wireless... you say that the iMac has no problem... so please give us the numbers... It is difficult to work from vague descriptions...

  Then, I need to know the connection speeds and all possible information. Run diagnostics on the computer wireless.

  You should also do a factory reset full of the TC and reconfigure it as follows.

  Start from a factory reset. No files are lost on the drive hard in doing so.

  Universal factory reset

  Turning off the TC... That is, remove the power supply cord or the power at the wall outlet, wait 10 seconds... Hold the reset button... be nice... Turn on always even now in reset... and keep holding in for another 10 seconds. You may need assistance because it is difficult to hold in reset and power on. It will show the success quickly flashing led front. Release reset... and wait a few minutes for the TC to reset and return with the factory settings. If the front LED flashes quickly you missed and simply try again. The reset is quite fragile in these... Press the key while it is just click away and not more... I've seen people bend lever or even break. I use a toothpick as a tool.

  NB. None of your files on the hard drive of the TC are removed... This simply clears the settings of the router of the TC.

  The installer the TC.

  And then redo the configuration of the computer with the Mavericks - Yosemite - ElCapo. (MYELCAP)

  1. the use of very short names... NO APPLE RECOMMENDED names. Without the space and pure alphanumeric characters.

  for example TCgen5 for the base station and the name of the TCwifi wireless.

  If the problem is using wireless TC24ghz and TC5ghz with fixed channels as it also seems to help stop the nonsense. But it can be tried in the second round. IE, plan on a first and second series of changes to fix this... If all goes well... I note other steps can you tour2.

  2. use all passwords also consistent with 1. but maybe a little longer. IE 8 and 20 characters of mixed cases and numbers... no alphanumeric non-caracteres.

  3. If the TC is router, you can ignore this point. It is only a problem when the TC is bridged.

  If ensure that the TC is always the same IP address... you will need to do this on the main router using a dhcp reservation... or a bit more complex setup by using the static IP address in the TC. But it's important for deriving from intellectual property in all directions when MYELCAP do not remember his name for 5 min after a reboot done for poor network management.

  4. check that your share on the computer name does not change... Make sure that it is also in line with the above... short without space and pure alphanumeric... but this change will mess up your TM backup... so be prepared to make a new, full backup. Sorry... keep this one for the second round, if you want to avoid a new backup.

  5 attach the TC disc into the computer manually.

  In Finder, go, connect to the server in the main menu,

  Type in SMB://192.168.0.254 (or whatever ip of TC is that you made static. It's a default router 10.0.1.1 and I encourage people to stick with it unless you know what you're doing).

  You can use the name... SMB://TCgen5.local where you replace TCgen5 with your name of TC... local is the default domain of the TC and does not change.

  However the names are not so easy as... the IP address nor reliable. They are not at least not in Yosemite. The field can also be a problem if you are not clogged or wireless directly to the Treasury Board.

  6. ensure that IPv6 is set to link-local only in the computer. For example wireless open network, wireless and Advanced preferences / TCP/IP... and the difficulty of IPv6. link-local only. Do the same for the ethernet if you use it.

  It is a lot more jiggery pokery, you can try, but the above is a good start... If you still find not reliable... don't be surprised.

  You may need to do more work on the computer itself. for example, to reset the NVRAM/PRAM/SMC... helped some people. A clean installation of the operating system is also useful if you update installed.

• Communication of the computer/router problems

  I bought a wireless router and plugged into a line of cat-5 while it would broadcast internet for my ultra-livre, which of course is not an ethernet port.  Now I have access to the internet, but applications that use the internet, as the steam and Skype, does not connect.  What is the problem?

  Hello

  Welcome to the Microsoft community.

  I see that Steam and Skype does not work on your computer.

  1. What happens when you try to sign in to Skype?
  2. What operating system is installed on the computer?

  You must have a strong Wi - Fi connection to work on Skype.

  You can check this link for more information.

  https://support.Skype.com/en/category/SKYPE_ACCESS/

  Steam problem please contact steam to help support.

  Go back with the necessary details so that we can help you better.

• Service pack causes problems

  I am running Windows XP Home edition on my computer, and I do a lot of video editing.  The problem is when I have service pack 3 installed (or whichever is later) and my camera is connected to the computer I can't capture video from the camera.  Video-editing programs will always recognize the camera is connected and even control the camera, but when I try to save it will not capture any video.  When I Uninstall SP3, it works very well.

  The problem is that I have the SP3 (or later version) installed.  I just got a new Windows Phone, and I can't install the Zune program without the latest service pack.

  Please someone help!

  Thank you!

  Are there updates for the 'video editing programs"that will allow him to work properly when SP3 is installed?

  You can try to uninstall all "video editing programs' before installing SP3 and then reinstall them after installing SP3.

  MowGreen
  Expert in Windows IT Pro - consumer safety

  * - 343-* FDNY
  NEVER FORGOTTEN

• Windows Service Pack 3 problem after Installation

  I installed Service Pack 3 on my Windows XP Home Edition and once the computer restarted I had a black and white screen saying that there is a power failure or something else and I could either start my computer in safe mode, normal, or the last known configuration.  Well, the only way that I even get to the login screen is choosing safe mode. The other choices keep simply by restarting the computer and I to return to the black and white screen.  What can I do?

  See if remove the SP3 fixes the problem-

  How to remove Windows XP Service Pack 3 from your computer
  http://support.Microsoft.com/kb/950249

  FYI

  Release notes for Windows XP Service Pack 3
  http://support.Microsoft.com/kb/936929

  The space of hard disk required for Windows XP Service Pack 3
  http://support.Microsoft.com/kb/947311

  Steps to take before you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950717

  How to troubleshoot an installation fails on Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950718

  TaurArian [MVP] 2005-2010 - Update Services

• Service Pack 3 problems!

  After you install Service pack 3 on my Tablet PC (xp home), I lost the ability to turn (rotate) my screen for entries, carbonless.  On my other computer (the same but with service pack 2), it still works.  How can I remove 3 and reinstall 2?

  Contact the manufacturer for updated driver to correct the problem.

  And get the installed SP3 on your computer, also: computers running WinXP SP2 not will be offered NO more critical security updates, automatic updates will stop working, and the Windows Update Web site will not be available after April 12, 2010, until that SP3 is installed. ~ Robear Dyer (PA bear); MS MVP (that is to say, mail, security, Windows & Update Services) since 2002. DISCLAIMER: I do not represent nor don't work for Microsoft

• Vista Service Pack 2 problem

  My sound no longer works after installing SP2. He said: "no audio output device is installed" by the President in the right corner. There is no problem in Device Manager.

  See:

  How to resolve problems that you experience after you install a Service Pack for Windows Vista
  http://support.Microsoft.com/kb/948481

  A device driver is not installed or a hardware device does not work correctly after you install a Service Pack for Windows Vista
  http://support.Microsoft.com/kb/948187

  TaurArian [MVP] 2005-2010 - Update Services