HP 500 Notebook PC - sound card and Windows 7
Hi, I have 500 HP laptop and I recently installed Windows 7 above.
I checked on the HP Web site and the drivers are only for Windows XP.
Actually windows update has hooked me upward an all of the currently installed EXCEPT audio & modem drivers.
I have the modem at all but I MUST HAVE AUDIO on this laptop
PLEASE HELP ME
Hey
Try this MOD driver, hope it should work & never mind abt hardware ID I already got
http://www.mediafire.com/?0dic0uoumt71muy
Hardware ID:
PCI\VEN_8086 & DEV_266E & SUBSYS_30C4103C
running the installation program has not worked to try to manually install...
Good luck
Tags: Notebooks
Similar Questions
-
Lenovo 3000 N 500 sound card and Modem do not work in Windows XP
Hello
I buy Lenove 3000 N500 a few days back from local sellers in PAKISTAN. It has built in Windows Vista.
I change its Windows XP operating system, now my sound card and modem does not work, there is only PCI device in device manage with yellow sign, but in the Control Panel, there is no modem or sound card.
I gave the two conextant Audio and Modem drivers against the PCI device but system says that there is no such device for these drivers.
and when I run Setup conextant Audio and software of the Modem, it is said that there no such device FRO these drivers
Please advice what to do to make it functional.
Thank you
Sani
If you use the version pre - SP3 of XP, you must install KB888111. It's the UAA bus driver. After you install this hotfix, install the audio driver and modem driver.
Enjoy.
-
After a reformat, it says I have no sound card and I've done it before? What should I do? Gateway Windows XP sp 1
It seems that you have not installed the driver for the sound card.
If you use a restore disk from gateway it should be there, if you are using a full Windows XP disk then gateway should have provided additional disks with all the necessary drivers.Normally, I would like to on the manufacturer's Web site to download the drivers, unfortunately with the gateway no longer in the company that will be difficult.If you can identify the manufacturer of the sound card installed gateway you could go to their website and see if they have a driver there.HTHNeilwww.nwarwick.co.UK -
need to install the sound card for windows xp
has accidentally deleted previous card in trying to increase the memory
Hi Harold,.
You can read the following article and check if it helps.
How to update a sound card driver in Windows Vista and Windows XP
We can also refer to the computer or the device manufacturer's Web site and try to download the latest drivers for the sound card.
Also see the following article:
-
I installed a new sound card, but it will not play sounds.
When I look at the properties under system it says driver active but not lit.
If I try and download the latest driver it says that you have the most updated version.
When you have a look at the sound properties it shows nothing.
Hello
· What is the number and the model of the computer?
· What is the exact message you read?
· What service pack is installed on the computer?
Run this utility from the link below: no sound in Windows: http://windows.microsoft.com/en-us/windows/help/no-sound-in-windows?T1=tab02
-
Computer can not detect any sound cards and graphics or communication ports.
Recently I reinstalled Windows using the CD, I had Dell, when I bought my computer. However, when I was done with the installation, I went on youtube to look at things and I realized that the sound was not working. I thought I must have forgotten to install the driver for my sound card, then when I tried to install, it says something in the sense of "error". - Impossible to find Port Com1 I looked into this a bit on google and found that it is probably disabled in my BiOS. I'm not sure what to do after that, but I hope that someone knows why my computer can not detect anything. hate viruses
http://support.Dell.com/support/downloads/index.aspx
Go to Dell website > drivers and downloads Section > key in your model number > get latest XP drivers for it > download/install them.
See you soon.
Mick Murphy - Microsoft partner
-
I had some virus that wiped out my computer and began to delete files .exe for evrything and started to interfere with my network connections that made me unable to get on the internet. I've got rid of the virus, but still not able to get on the internet, so I decided to reinstall Windows XP from the service pack CD that I got with the computer. Now that I did it, it seems that all the components of windows have disappeared from my list of programs in the control panel. I still have everything that was on the hard drive on it, but I can't seem to get things to transfer to the new XP operating. My biggest thing I found is that my soundcard has seemed to disappear and my volume control will not work because it says I have no mixers or equipment installed. Help, please.
You don't have a clean install of Windows. Backup your data and do a clean install according to the instructions below. Once installation is complete, you will then need to install the drivers for all your hardware.
http://michaelstevenstech.com/cleanxpinstall.html - Clean install - how-to
http://www.elephantboycomputers.com/page2.html#Reinstalling_Windows - you will need at hand MS - MVP - Elephant Boy computers - Don ' t Panic! -
Satellite U300-153 WXP need driver for sound cards and video
Hi all
Is anyone know all the drivers for my video and audio drivers ' Satellite U300-153 (PSU30E-099017AR) "?
I bought my laptop in UAE UNITED with MS Vista Basic Operating. My system is on all fours, then, I changed it with my
Windows XP SP2 - SATA, but the sound and video card I downloaded available site Web from Toshiba is not
works fine in my notebook, showing 'PCI system unit' doesn't work does not correctly, affecting my sound "do."
map does not"and the video is"128 mb"only its shared.I don't like Vista, I only want to operate quickly.
Waiting for your response.
Thank you in advance.
Kind regards
ARNOBIEHello
Try the XP drivers Toshiba site. :)
http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp#
-
Satellite U300 - cannot get sound card running Windows XP Home edition
Hi all
I installed Windows XP Home edition on my U300 after playing with nlite nd the sata raid drivers.
I installed all think them, but my card doesn't work his and my webcam also. I m now 3 days on it and t can find a solution. Please if someone else have a successful installation of Windows XP Home on the U300-115, please give some advice.BTW, the installation order mentioned on the download driver of the page s + ++ s... Toshiba has a driver install package for us is better.
THX
JohnHello
about the noise I recommend going to www.realtek.com and download the driver from there, which would be much better then the driver on the toshiba site. :)
In regards to your webcam I Don t know how to help you because I watched the driver download page and I found something didn t. Maybe you should try the camera of another model software since the cameras are the same. I read on some forums (not here) that users tried with their machines and it worked for them.
It s worthy to give it a try.
Welcome them -
After the free upgrade to WIN7 for WIN10 my laptop has no noise (with internal or external speakers). I tried to uninstall driver IDT and allowing windows 10 to reinstall the driver through scanning for changes of HW - still no sound. I would appreciate any guidance or fixes to this problem. Thank you.
I'm happy to announce that I now have sound on my laptop G71-340US. After that more detailed error troubleshooting I found that there is an application called IDT Audio PC (aka IDT HD Sound) installed on my laptop by HP (OEM), I think. While I don't know exactly what function of this application is, it seems, it is related to activation of the feature of IDT HD Codec drivers. Somehow, I decided to look in Task Manager - startup and I saw this listed IDT Audio PC. I clicked on disable and then a minute later clicked on activate. After I did that, as simple as it seems, I have now heard both internal and external speakers. This is the first time I heard all the sounds since the upgrade to WIN10. I checked several times by re-booting my laptop and every time I now have sound. I will continue to test it through the week and see if it continues to be OK. In the meantime, I thought I'd share this potential fix (or solution) with all stakeholders. Perhaps others will find this useful and give me your comments. Fingers crossed!
PS. BTW, if anyone out there knows what PC IDT sound is by all means share your knowledge. I'm curious why this app appears more often in the forum messages and how it can relate to the WIN10 upgrade. Sorry, but I do not remember what prompted me to look at the task - starting but Manager I'm glad I did. It's great to hear again!
-
Unable to connect to the internet with the NETWORK card and Windows Millennium Edition.
Hello
I turned on my old computer yesterday, who has installed Windows Millennium Edition. At the back of the computer is an Ethernet port which is marked as LIEN ACT. The NIC with this port is Realtek 8139 PCI Fast Internet Adapter. I spend two hours on the Internet configuration and I did and finally got connected, but then, a few hours after, something went wrong and the Internet and the NETWORK card has stopped working! And the card has disappeared from the Device Manager, but he's still showing in network in Control Panel. I opened the computer and I reconnected it to the slot, but it did not help. At the back of the computer next to this port are two LEDs - green indicates the power that lights up when I plug the Internet cable and the other orange indicates actual connection. But now these two LEDs are not indicating something even when I plugged in the cable to the Internet, which comes from my router. In the computer a Dial Up connection PCI is installed too, but I disabled it. I used Dial-Up in 2002. So, I need help.But I know that I can connect with this Ethernet card to the Internet because it worked for 3 hours, I've loaded the pages and downloaded programs.Please don't point, should I upgrade Windows!Thank you.Hi friend,
You can try a Bing search on connectivity to Win ME, I don't know there are still a few old sites that are not taken down you will find a few FAQ on.
I saw not a ME machine in too many years to count!
Good luck on your adventure.
B Eddie -
sound card driver windows 7/64 to HP6270
I did a clean install on my HP6270 with windows 7/64 can't get the noise at work, either the card reader maybe more soon to add. {hp pavilion zv6000 zv6270us} tried to mod the driver 30399
USCG RET
Don
Hello:
I would like to try the driver for the card reader TI Vista Business of the nc6400.
I don't think that the card reader will actually work in W7 unless you install the driver below.
-
notebook dv6 restored envy and windows 8 not be loading not I don't have disks
I bought a laptop HP dv6 want used with Windows 8. The person I bought was not to remove his password or fingerprint scan, I have been unable to reach (I bought out of State). I did some research and found the best thing to do was restore complete system - which i followed the instructions and made. I don't have the original driver disc.
I am now in a loop of contant, where he arrives with the first password which successfully, I have changed but want to remove. When it starts to load the administrator that is in a constant loop of Windows didn't load correctly. Restart the computer. And I fo around and around, I tried everything I found here and many other bulls and still I am unable to make it work.
I have a Windows 7 disc, but I'm afraid to even try because I was told that resetting to the factory settings would work and it doesn't I don't want to do more damage.
I noticed that the date was born 00/00/0000 say I'm not sure if it of part of the problem or not
When you request support, please provide the model name and product number complete (p/n) of the HP computer in question. HP/Compaq made thousands of computer models. Without this information, it can be difficult, even impossible to help you solve your problem.
The information requested above are on the bottom of your computer, inside the battery compartment or on the BIOS boot screen. Please see How can I find my model number or product number? for help more to find this information. DO NOT include your serial number. Please enter the product/model information consumer HP Online Support page and post it here for our review.
Please contact official HP support in your country / region, via the Portal Support HP's worldwide, to see if the HP recovery support is available for the computer. Software may not be covered by warranty, and there may be fees for the HP recovery media.
If you have any other questions, feel free to ask.
Please click the 'Thumbs Up' white LAURELS to show your appreciation
-
Bluetooth notebook Mouse 5000-mouse and Windows 8 Pro
My mouse will pair with my HP lap top but immediately returned to offline mode. I got it combine successfully a couple of times, but he'll still go offline after a while. Is it possible to transform online?
I tried to solve this problem for hours, admit defeat and get another mouse?
I have the same problem with this mouse. Download drivers and software sounds like this would be a great... If there actually were drivers and software to download... what, there.is.not.
My computer recognizes the mouse... and apparently knows his full name. However, my computer obviously doesn't quite well for a device with her relationship. So it is, next to my laptop, unfortunately and perpetually "offline."
According to the documentation provided with the mouse, after recognizing the new device, I had to follow some 'instructions '. Unfortunately, my computer has suddenly rejected the mouse after initial recognition and I have not received any additional installation "instructions".
I tried several times "open lines of communication", nothing happens. I even checked the site to download several times between attempts to see if the drivers/software had appeared as if by magic.
If anyone out there can help me to understand this point, it would be greatly appreciated! I bought the bluetooth mouse because, frankly, I didn't violate my awesome new computer by sticking a dongle in it.
-
Apparently, I disabled my soundcard by rt clicking on the speaker icon in the status bar on bottom screen rt system. Then I deselected the output device and selected the option helmet on the reading tab. I am getting no sound using headphones or my internal speakers. Now hovering above the "speaker" icon says no audio output device is installed. On the reading tab, I now have only the headset option. I have changed nothing. I use Windows Vista Home Premium on a laptop Fujitsu Lifebook series A. helping, please? THX.
Thx for the help, in my particular case uninstall the sound card and then restarting solved the problem. It's a much simpler solution. THX Tho!
Howlin'
Maybe you are looking for
-
Qosmio F20: wireless keep disconnecting
Hello I have a problem with my laptop. He always cut after 2-3 min for the wireless network. I don't know what's the problem with him.My laptop is Qosmio F20 with WINDOWS MCEMy router is USR 9108 with security on the wireless network using WPA - TPK
-
cartridge error refer to device documentation to troubleshoot
HP Offisejet 5610 all in one printer suddenly displays cartridge error. Refer to device documentation to troubleshoot. Any suggestions? Troubleshooting has not solved the problem. Thank you.
-
What charge the Sansa Clip: after an hour, the screen turns white (a screen saver, I guess). I would like to activate the screen saver immediately, to extend the duration of the display. Is it possible to do? Or maybe in a version of firmware future
-
No access to systems on a network - error "the name of the provider specified network is Invalid"
Hello! I can't use the network to locate files on a computer, and it drives me crazy to understand. Heck, he can't even locate yourself. Here is what comes up when I try to do. All computers, I clicked on do not work and they are all Windows 7 except
-
When you try to create an earlier date for the restoration of my pc (windows 8.1) for the first time (no previous restore point) the only option I get is to create point of restoration of the date and time of today. I need to restore to an earlier da