FI reboot causes errors on SAN

I have 2 fabrics consisting of a 6120XP FC Switching mode connected to a MDS 9124 with a 4 port port channel.  There are also the HP Proliant Servers connected directly to each fabric on the 9124 s. Storage is an EMC Clariion NS480. All servers are running ESX 4.1u1.  I want to share LUNS between HP servers and blade UCS to vmotion VMs on the servers of the UCS.

When I updated the firmware on one of the 6120 s and restarted, servers ESX from HP has temporarily lost access to the shared LUN. It also happened when I added the LUNS to the storage group for one of the UCS ESX servers.

Is there a configuration problem which can cause this or am I wrong to expect that I can share LUNS between HP and UCS servers

NPIV activation does NOT require a recharge.  Allowing the fact NPV.

Kind regards

Robert

Tags: Cisco DataCenter

Similar Questions

  • 6229 OR causes error-50202 on Fujitsu/Siemens Celsius PC

    Hello!

    With the help of MAX Self test or test causes error-50202. I use a PC Celsius Fujitsu/Siemens, model W370 E85 + with LabView 8.6.1. The PC uses an Intel motherboard and an Intel Dual core processor. The PC is new.

    I tried to test another PC but the USB startup utility seems to work only with the above PC. On the other PC, I get the error pharsys and the boot process stops.

    I also have a full equipped PXI dual core system RT that works without any problems with my host LabView 8.6.1 installation.

    How to solve this problem?

    NEWS! I was testing a card PCI-6229 second and identical, but the map did not, too. And while I was there, I simply changed the slot inside the PC Celsius PCI: and the self test successful!

    Here is a screenshot after changing the slot. You can even see the 'Phantom' 1 unit (where one of the cards was before).

    I have to do more tests, but I was sure, that these IRQ problems are history (if it was such a problem).

  • Common problem with Windows 7, what causes errors with itunes, the software adobe reader, TurboTax 12

    Is there a common problem with Windows 7, what causes errors with itunes, the software adobe reader, TurboTax 12?  I get error messages when I try to use one of these programs

    Hello

    Thanks for the reply with the details.
     
    Problem with opening PDF documents, please see the link and follow the steps in the article:
     
    Error "Windows cannot access the specified device, path or file" when you try to install, update or launch a program or file
    Important: Disable your antivirus or changed settings can make your PC vulnerable to viral, fraudulent, or malicious attacks. Microsoft does not recommend that you disable your antivirus software or change settings. If you need to temporarily disable your anti-virus software, you should reactivate as soon as you are finished.
     
    See the link for the question with idevices:
     
    iTunes for Windows: "Could not load the data class" or "Cannot load provider data" alert synchronization services
     
    Problem with TurboTax 12, check out the links and follow the steps:
     
    5639 error: Cannot configure the product update system
     
     
    If the troubleshooting steps above do not help, check in a new user account:
    Reference:
     
    If it works in the new user account, then the current may be corrupt user account.
    To fix the damaged user account, follow the steps in the following article:
    http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile
     
    Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you further.

  • Root cause error code is Houston-26049. Error messages settings are {0 = XxwfsMdmCustSummaryReportVO} oracle.jbo.server.ViewDefImpl.doLoadFromXML(ViewDefImpl.java:4762)

    Hello

    We have built a standalone ADF on Jdeveloper 11.1.1.7 application that interacts with the Oracle database using business components.

    XxwfsMdmCustSummaryReportVO is a view object that is based on an entity object. After the application is redeployed on a server remote weblogic, whenever a user attempts to access the application, the page is empty. Even if the error disappears once this managed server is restarted. On checking the logs we could trace it down to the below error:

    oracle.jbo.PersistenceException: Houston-29114 ADFContext is not configured to process this exception messages. Use the code of exception stack trace and error to investigate the root cause of this exception. Root cause error code is Houston-26049. Error messages settings are {0 = XxwfsMdmCustSummaryReportVO}

    at oracle.jbo.server.ViewDefImpl.doLoadFromXML(ViewDefImpl.java:4762)

    at oracle.jbo.server.ViewDefImpl.loadFromXML(ViewDefImpl.java:4015)

    at oracle.jbo.server.ViewDefImpl.loadFromXML(ViewDefImpl.java:3962)

    at oracle.jbo.server.MetaObjectManager.loadFromXML(MetaObjectManager.java:560)

    at oracle.jbo.mom.DefinitionManager.loadLazyDefinitionObject(DefinitionManager.java:1300)

    at oracle.jbo.mom.DefinitionManager.findDefinitionObject(DefinitionManager.java:626)

    at oracle.jbo.mom.DefinitionManager.findDefinitionObject(DefinitionManager.java:546)

    at oracle.jbo.mom.DefinitionManager.findDefinitionObject(DefinitionManager.java:528)

    at oracle.jbo.server.MetaObjectManager.findMetaObject(MetaObjectManager.java:794)

    at oracle.jbo.server.ViewDefImpl.findDefObject(ViewDefImpl.java:876)

    at oracle.jbo.server.AMViewUsage.createViewObject(AMViewUsage.java:112)

    at oracle.jbo.server.ApplicationModuleDefImpl.loadViewObject(ApplicationModuleDefImpl.java:660)

    at oracle.jbo.server.ApplicationModuleDefImpl.loadComponents(ApplicationModuleDefImpl.java:921)

    at oracle.jbo.server.ApplicationModuleImpl.createRootApplicationModule(ApplicationModuleImpl.java:510)

    at oracle.jbo.server.ApplicationModuleHomeImpl.create(ApplicationModuleHomeImpl.java:87)

    at oracle.jbo.common.ampool.DefaultConnectionStrategy.createApplicationModule(DefaultConnectionStrategy.java:158)

    at oracle.jbo.common.ampool.DefaultConnectionStrategy.createApplicationModule(DefaultConnectionStrategy.java:73)

    at oracle.jbo.common.ampool.ApplicationPoolImpl.instantiateResource(ApplicationPoolImpl.java:2836)

    at oracle.jbo.pool.ResourcePool.createResource(ResourcePool.java:583)

    at oracle.jbo.common.ampool.ApplicationPoolImpl.prepareApplicationModule(ApplicationPoolImpl.java:2396)

    at oracle.jbo.common.ampool.ApplicationPoolImpl.doCheckout(ApplicationPoolImpl.java:2270)

    at oracle.jbo.common.ampool.ApplicationPoolImpl.useApplicationModule(ApplicationPoolImpl.java:3169)

    at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:592)

    at oracle.jbo.http.HttpSessionCookieImpl.useApplicationModule(HttpSessionCookieImpl.java:234)

    at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:525)

    at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:520)

    at oracle.adf.model.bc4j.DCJboDataControl.initializeApplicationModule(DCJboDataControl.java:523)

    at oracle.adf.model.bc4j.DCJboDataControl.getApplicationModule(DCJboDataControl.java:869)

    at oracle.adf.model.binding.DCDataControl.setErrorHandler(DCDataControl.java:484)

    at oracle.jbo.uicli.binding.JUApplication.setErrorHandler(JUApplication.java:261)

    at oracle.adf.model.BindingContext.put(BindingContext.java:1412)

    at oracle.adf.model.binding.DCDataControlReference.getDataControl(DCDataControlReference.java:174)

    at oracle.adf.model.BindingContext.instantiateDataControl(BindingContext.java:1128)

    at oracle.adf.model.dcframe.DataControlFrameImpl.doFindDataControl(DataControlFrameImpl.java:1638)

    at oracle.adf.model.dcframe.DataControlFrameImpl.internalFindDataControl(DataControlFrameImpl.java:1507)

    at oracle.adf.model.dcframe.DataControlFrameImpl.findDataControl(DataControlFrameImpl.java:1467)

    at oracle.adf.model.BindingContext.internalFindDataControl(BindingContext.java:1261)

    at oracle.adf.model.BindingContext.get(BindingContext.java:1211)

    at oracle.adf.model.dcframe.DataControlFrameImpl.restoreDataControl(DataControlFrameImpl.java:953)

    at oracle.adf.model.dcframe.DataControlFrameImpl.restoreSnapshot(DataControlFrameImpl.java:1022)

    at oracle.adf.model.BindingContext.restoreSnapshot(BindingContext.java:766)

    at oracle.adf.model.BindingContext.beginRequest(BindingContext.java:1876)

    at oracle.adf.model.BindingRequestHandler.invokeBeginRequest(BindingRequestHandler.java:395)

    at oracle.adf.model.BindingRequestHandler.beginRequest(BindingRequestHandler.java:261)

    at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:203)

    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

    at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:128)

    to org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$ FilterListChain.doFilter (TrinidadFilterImpl.java:446)

    at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)

    to org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$ FilterListChain.doFilter (TrinidadFilterImpl.java:446)

    at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:271)

    at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:177)

    at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)

    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

    at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:180)

    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

    to oracle.security.jps.ee.http.JpsAbsFilter$ 1.run(JpsAbsFilter.java:119)

    at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:324)

    at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:460)

    at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)

    at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)

    at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)

    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

    at oracle.security.wls.filter.SSOSessionSynchronizationFilter.doFilter(SSOSessionSynchronizationFilter.java:292)

    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

    at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:163)

    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

    at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)

    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)

    to weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.wrapRun (WebAppServletContext.java:3730)

    to weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.run (WebAppServletContext.java:3696)

    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)

    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)

    at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2273)

    at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2179)

    at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1490)

    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)

    at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)

    Caused by: java.lang.IllegalArgumentException: no oracle.jbo.AttributeDependency$ class const enum Type.

    at java.lang.Enum.valueOf(Enum.java:196)

    to oracle.jbo.AttributeDependency$ Type.valueOf (AttributeDependency.java:20)

    at oracle.jbo.server.AttributeDefImpl.loadDependencies(AttributeDefImpl.java:6235)

    at oracle.jbo.server.AttributeDefImpl.loadUserDefinedAttr(AttributeDefImpl.java:4672)

    at oracle.jbo.server.ViewAttributeDefImpl.loadFromXML(ViewAttributeDefImpl.java:2190)

    at oracle.jbo.server.ViewDefImpl.loadAttributes(ViewDefImpl.java:7081)

    at oracle.jbo.server.ViewDefImpl.doLoadFromXML(ViewDefImpl.java:4631)

    at oracle.jbo.server.ViewDefImpl.loadFromXML(ViewDefImpl.java:4015)

    at oracle.jbo.server.ViewDefImpl.loadFromXML(ViewDefImpl.java:3962)

    at oracle.jbo.server.MetaObjectManager.loadFromXML(MetaObjectManager.java:560)

    at oracle.jbo.mom.DefinitionManager.loadLazyDefinitionObject(DefinitionManager.java:1300)

    at oracle.jbo.mom.DefinitionManager.findDefinitionObject(DefinitionManager.java:626)

    at oracle.jbo.mom.DefinitionManager.findDefinitionObject(DefinitionManager.java:546)

    at oracle.jbo.mom.DefinitionManager.findDefinitionObject(DefinitionManager.java:528)

    at oracle.jbo.server.MetaObjectManager.findMetaObject(MetaObjectManager.java:794)

    at oracle.jbo.server.ViewDefImpl.findDefObject(ViewDefImpl.java:876)

    at oracle.jbo.server.AMViewUsage.createViewObject(AMViewUsage.java:112)

    at oracle.jbo.server.ApplicationModuleDefImpl.loadViewObject(ApplicationModuleDefImpl.java:660)

    at oracle.jbo.server.ApplicationModuleDefImpl.loadComponents(ApplicationModuleDefImpl.java:921)

    at oracle.jbo.server.ApplicationModuleImpl.createRootApplicationModule(ApplicationModuleImpl.java:510)

    at oracle.jbo.server.ApplicationModuleHomeImpl.create(ApplicationModuleHomeImpl.java:87)

    at oracle.jbo.common.ampool.DefaultConnectionStrategy.createApplicationModule(DefaultConnectionStrategy.java:158)

    at oracle.jbo.common.ampool.DefaultConnectionStrategy.createApplicationModule(DefaultConnectionStrategy.java:73)

    at oracle.jbo.common.ampool.ApplicationPoolImpl.instantiateResource(ApplicationPoolImpl.java:2836)

    at oracle.jbo.pool.ResourcePool.createResource(ResourcePool.java:583)

    at oracle.jbo.common.ampool.ApplicationPoolImpl.prepareApplicationModule(ApplicationPoolImpl.java:2396)

    at oracle.jbo.common.ampool.ApplicationPoolImpl.doCheckout(ApplicationPoolImpl.java:2270)

    at oracle.jbo.common.ampool.ApplicationPoolImpl.useApplicationModule(ApplicationPoolImpl.java:3169)

    at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:592)

    at oracle.jbo.http.HttpSessionCookieImpl.useApplicationModule(HttpSessionCookieImpl.java:234)

    at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:525)

    at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:520)

    at oracle.adf.model.bc4j.DCJboDataControl.initializeApplicationModule(DCJboDataControl.java:523)

    at oracle.adf.model.bc4j.DCJboDataControl.getApplicationModule(DCJboDataControl.java:871)

    at oracle.adf.model.binding.DCDataControl.setErrorHandler(DCDataControl.java:484)

    at oracle.jbo.uicli.binding.JUApplication.setErrorHandler(JUApplication.java:261)

    at oracle.adf.model.BindingContext.put(BindingContext.java:1412)

    at oracle.adf.model.binding.DCDataControlReference.getDataControl(DCDataControlReference.java:174)

    at oracle.adf.model.BindingContext.instantiateDataControl(BindingContext.java:1128)

    at oracle.adf.model.dcframe.DataControlFrameImpl.doFindDataControl(DataControlFrameImpl.java:1638)

    at oracle.adf.model.dcframe.DataControlFrameImpl.internalFindDataControl(DataControlFrameImpl.java:1507)

    at oracle.adf.model.dcframe.DataControlFrameImpl.findDataControl(DataControlFrameImpl.java:1467)

    at oracle.adf.model.BindingContext.internalFindDataControl(BindingContext.java:1261)

    at oracle.adf.model.BindingContext.get(BindingContext.java:1211)

    at oracle.adf.model.dcframe.DataControlFrameImpl.restoreDataControl(DataControlFrameImpl.java:953)

    at oracle.adf.model.dcframe.DataControlFrameImpl.restoreSnapshot(DataControlFrameImpl.java:1022)

    at oracle.adf.model.BindingContext.restoreSnapshot(BindingContext.java:766)

    at oracle.adf.model.BindingContext.beginRequest(BindingContext.java:1876)

    at oracle.adf.model.BindingRequestHandler.invokeBeginRequest(BindingRequestHandler.java:396)

    at oracle.adf.model.BindingRequestHandler.beginRequest(BindingRequestHandler.java:261)

    at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:203)

    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)

    at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:131)

    to org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$ FilterListChain.doFilter (TrinidadFilterImpl.java:447)

    at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)

    to org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$ FilterListChain.doFilter (TrinidadFilterImpl.java:447)

    at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:271)

    at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:177)

    at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)

    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)

    at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:181)

    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)

    to oracle.security.jps.ee.http.JpsAbsFilter$ 1.run(JpsAbsFilter.java:119)

    at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:324)

    at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:460)

    at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)

    at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)

    at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)

    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)

    at oracle.security.wls.filter.SSOSessionSynchronizationFilter.doFilter(SSOSessionSynchronizationFilter.java:293)

    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)

    at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:163)

    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)

    at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)

    to weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.wrapRun (WebAppServletContext.java:3730)

    to weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.run (WebAppServletContext.java:3696)

    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)

    at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2273)

    at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2179)

    at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1490)

    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)

    at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)

    I found a bug " ", "(12564061" related to this error and it asks me to check if the oracle.jbo.usemdm property is set to true or not and check if there are dependencies defined in the associated principal object. The property is already set to true and it is y no dependency attribute defined in the enitity object. Could you please help?

    Your case root:

    java.lang.IllegalArgumentException: no oracle.jbo.AttributeDependency$ class const enum Type.

    This means that your java implementation line is corrupt.

    Try to remove your current line Impl, then expose it again.

  • exception that tells which line causes error

    Hi all

    my need is to add exception to my procedure.

    Yes, I know how to do it. But he said only "ORA" error and I would also like to know what line number causes error.

    The procedure is huge...

    So is it possible at all?

    Marco wrote:

    The procedure is huge...

    Yes, but with different operations to meet business requirements, not with the number of lines. For this you must connect before and after each transaction in the table of the newspaper or by registration method of dml errors. So that you can have a successful execution of the transaction after what a better idea, the error took place and was not connected there after.

    Yes to verify line number, you can consult the following exceptions in oracle 10 g .

    Thank you!

  • DateField as itemrender causes Error #1034: Type coercion failed: cannot convert '10/03/2006.

    I have itemrende onliner.

    < mx:DataGridColumn dataField = "solddate."
    headerText = "Date".
    itemRenderer = "mx.controls.DateField"
    rendererIsEditor = "true".
    editorDataField = "selectedDate" / >

    XML =

    < solddate > 10/03/2006 < / solddate >

    This translates

    DateField as itemrender causes Error #1034: Type coercion failed: cannot convert ' 10/03/2006' in Date.

    Is it possible for me to be

    1. change the output xml to the required format

    or

    2 convert the data within the itemrenderer

    The answer is here http://blog.flexmonkeypatches.com/2008/04/08/datefield-itemeditor-when-date-is-a-string/comment-page-1/

or you can do it inline like

DataGridColumn headerText="Date"                   editable="true"                    rendererIsEditor="true">                              DateField selectedDate="{new Date(Date.parse(data.@solddate as String))}"/>                                               DataGridColumn>

  • Why the right mouse clicking on the icons and thumbnails cause error message and the screen resets?

    When I returned from vacation, my PC worked as usual, but later in the day that it would be not laod, it gets to a certain point and then a blue screen and try a reboot. Managed to use the 'safe mode' and finally 'System restore', but it kept crashing until I went back as it would go, i.e. end of /April. Been authorized since except this error right click of the mouse.

    Looks like you may have a bad Windows Explorer (not Internet Explorer) add on.

    What is your version of XP and the Service Pack?

    Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

    Here are a few thoughts:

    When the Windows Explorer (not Internet Explorer) is wrong to behave on a right click, begins to suspect third-party add-ons explore extension.

    Those who would be the Explorer extensions that do not belong to Microsoft.  This means that extensions that you have added.  Solution Explorer extensions are generally well and installation of certain applications will install extensions from Explorer solutions for you, give you a choice and sometimes they can be added sometimes without your knowledge or consent when you install some software.

    Have you installed new software because the system finally worked correctly and if so, what?

    Solution Explorer extensions are sometimes added as a new right-click option, you see on folders and files (like the scan of this file, open that file, play this song).  When you right click on something, the Explorer wants to display a menu of choices.  If there is a bad or outdated extension, Explorer may crash.

    If there is something in particular that you do during exploration that you know will be the cause of the problem, which will help focus on the problem and the help that you suddenly know, when you have found and corrected.  If you can get there when you want it, make an adjustment, then there is no message the next time you do whatever it is you're doing, you've found and fixed (or perhaps you can fix).

    First of all you need a way to see what modules explore you have installed now and a way to turn them off (not uninstall them) so you can understand that we are at the origin of the problem.  You can have a lot of extensions not installed Microsoft don't even know you about.

    Download ShellExView here to see what Explorer extensions you have loaded:

    http://www.NirSoft.NET/utils/shexview.html

    ShellExView does not install anything on your computer, simply of runs and displays.

    After launching ShellExView, under Options, choose "Mark non-Microsoft Extensions" and extensions not Microsoft will be pink, clear, but on some systems which is a difficult color to see, so click on display, choose the columns and move the column Microsoft closer to the top, so you can see on your screen without having to scroll left and right.

    Click on the column header for Microsoft not to sort the display (by clicking on the column of Microsoft) if all the "" s are on top and easy to see.

    The s in 'No' would be things you have added (non-Microsoft) and are what you should be suspect.

    You can also Google the name of a suspect add-on and see if there are visits, on Explorer crashing and what other people have done about it.

    You can Google something like:

    Explorer XP crashing

    (you must fill in the name of adds your suspect on).

    See what kind of search results hits you get and are looking for solutions or situations that sound like yours.

    I'm not a defender of trial and error, but I can't think of another way to do...

    Right click and disable the extensions one at a time non-Microsoft keep a list so you can enable them again later if you wish. The result of the change is immediate and no reboot is necessary.  Test your failure condition.

    If you recognize all the extensions that have been added or recently downloaded, start with these first.

    Disabling the extension does not uninstall the extension - it is just disabled.

    Disable them one at a time until your right click on do not generate an error, then restart and test again.  Last extension you have turned off the
    a suspect.

    You can also just disable all non-Microsoft extensions, restart and allow them one at a time until you find the one that generates the condition.

    The hope is that you will find an extension that caused the error, and then you can figure out what on this subject - either uninstall it or see if you can get an update of the author of the extension of their web page.

    I have not your problem, but when you turn off/turn on extensions, the extension is immediately disabled, so disable an extension does not seem to require a restart, but if you find the problem, I reboot and retest anyway to really be sure that the problem has disappeared.

    If you post your non-Microsoft extensions list, maybe someone will recognize it as a potential problem.

    If you find the offending extension that's the problem, please let us know what it is that I can add to my list.

    If you get a blue screen of death (BSOD), you must do this:

    The next time your system crashes, provide more information on what you see.
    Here's a BSOD example showing information you provide:
    Send for the nose and the Red arrows (3 to 4 lines total).
    Send all * line STOP message since there are clues in the 4 parameters.
    If there is a name of the file listed in the STOP message, don't forget to include this information too.
    Ignore the boring text unless it seems important to you.  We know what a BSOD looks like, we need to know what your BSOD looks like.

    Finally, I'd be curious to know why you say you get an error message and tell us what the error message said.

  • Computer freezes (no blue screen), but on reboot displays error code 124.

    More than 3 months my computer froze at random on 5 occasions, sometimes all this idle and sometimes browsing the internet.
    After reboot, windows tells me that he has recovered from an unexpected error.
    It's information:

    BCCode: 124
    BCP1: 0000000000000000
    BCP2: FFFFFA8007CD88F8
    BCP3: 0000000000000000
    BCP4: 0000000000000000
    OS version: 6_1_7601
    Service Pack: 1_0
    Product: 768_1

    I also downloaded the minidump file on my skydrive:

    https://SkyDrive.live.com/#CID=F3389EB25ED220A7

    No information about the cause of the problem would be highly appreciated.

    Thanks in advance,

    Elliot.

    Original title: Windows 7 freezes and the error code is: BCCode: 124

    There are two main problems. I am not sure of the third.

    Log name: System
    Source: Application Popup
    Date: 23/09/12 19:23:08
    Event ID: 1060
    Level: error
    Description:
    \SystemRoot\SysWow64\drivers\tandpl.sys has been blocked by a loading due to incompatibility with this system. Please contact your software vendor for a compatible version of the driver.

    It could be malicious.

    I recommend that you run Disk Cleanup or cCleaner to remove temporary files as this will reduce the time to scan security software.

    Start the computer in safe mode with network and download and install Malwarebytes (free version for individuals only), updated definitions and run in safe mode. Disable other security software while you do the analyses.

    http://www.computerhope.com/issues/chsafe.htm

    http://www.Malwarebytes.org/products/malwarebytes_free

    Download and run SuperAntiSpyware (Free Edition)
    http://www.SUPERAntiSpyware.com/download.html

    I suggest that we check if the two errors are still happening after that we dealt with the foregoing

    Log name: System
    Source: Service Control Manager
    Date: 23/09/12 19:23:15
    Event ID: 7000
    Level: error
    Description:
    The AODDriver4.1 service failed to start due to the following error:
    The system cannot find the specified file.

    Log name: System
    Source: bowser
    Date: 23/09/12 19:24:13
    Event ID: 8003
    Level: error
    Description:
    The master browser has received a server announcement from VICTORIA-PC computer that believes it is the master browser for the domain of transport NetBT_Tcpip_ {CB46FB47-59D5-4BC9-A10A-C4E6EC721082}. The master browser stops or an election is forced.
        \Device\LanmanDatagramReceiver
        VICTORIA-PC
        NetBT_Tcpip_ {CB46FB47-59D5-4BC9-A10A-C4E6EC721082}

  • Satellite 1110-Z14: ATI-Graphic cause error when using LAN, DSL

    English version below!

    UPS... German version not accepted... angry!

    [English]
    Computer laptop Satellite 1110-Z14 crashes when you use LAN (network connection).
    Error message: too high voltage or a current USB device, there is no USB device not connected!
    (ATI) graphics card doesn't work properly (low resolution) - reboot, the system crashes to the top
    Note: The laptop work stable during the use not LAN!
    The system is clean! Please don't tell me that I need to reinstall my software.

    Does anyone know about this error? Thanks in advance.

    Hello

    It is the first time I heard of this problem.
    For me it looks like a hardware malfunction and I don t think you will solve it by yourself. In my opinion you need an expert and the only way is to contact the Toshiba service partner in your country. He can start the diagnostic test and it can give you an appropriate response.

  • You try to run the scan mode and mode interface fpga at the same time is causing errors

    I'm reading a 9236 9237 and a 9215 with the scanning engine and read from two 9211 modules with the fpga. It's because I need to acquire to 200 Hz with the 9236 9237 9215 but maximum rate of the scan engine is limited by the slower module in the system, which in this case is the max of 15 hz the 9211.

    So to use both interfaces (scan engine and fpga), I followed the percisely given in this article for instructions.

    1. the project has created and added the peripheral crio using the interface of the scan engine.

    2. Add the target fpga and drag and drop the 9211 inside modules

    3. has created the fpga in interface file with and compiled with no error.

    4. interfaced with the file fpga at almost exactly the way the sample project of "getting started with 9211' by using the engine of analysis in the interface with the other modules.

    5. after the errors to discover that I created a VI that tests for just the portion 9211 code (called "thermocouple FPGA method Test.vi")

    The data returned by the interface fpga was nothing else than zeros on all channels, even if thermocouples were hooked on some of them. (all zeros as entries in the convert temperature vi gives-410, 6160 degrees F, if you happen to have the material to try this.)

    I get the following error from the open fpga vi reference:

    code error-61141
    "Thermocouple method Test.vi FPGA.
    Activities FPGA:
    

    Open FPGA interface reference.
    Reserved outside LabVIEW FPGA:  turns The RIO Scan Interface.  You must set the mode Interface FPGA chassis in order to unlock the FPGA. »

    It's extremely frustrating, because as I explained, I've been very attentive not only follow the instructions for concurrent fpga and analysis but also to model my VI by the example of VI, even if only for the moment, just to try to work things out.

    Any help would be appreciated as I need to fix this for the further development and I am somehow in a lack of time. I opened a support ticket (reference #7256226), but the app engineer had no time to answer.

    My system:

    cRIO-9014 controller RT with crio-9104 bottom of basket.

    LabVIEW 2009

    Latest drivers and peripheral software pc and rio (RIO scan 3.2 engine support june2009)

    rex1030 wrote:

    I'm reading a 9236 9237 and a 9215 with the scanning engine and read from two 9211 modules with the fpga. It's because I need to acquire to 200 Hz with the 9236 9237 9215 but maximum rate of the scan engine is limited by the slower module in the system, which in this case is the max of 15 hz the 9211.

    This should not be the case.  9211 data will not update with each sweep, but you should be able to run the scan faster than 15 Hz without problem.  Do you have specific issues with this?

    So to use both interfaces (scan engine and fpga), I followed the percisely given in this article for instructions.

    1. the project has created and added the peripheral crio using the interface of the scan engine.

    2. Add the target fpga and drag and drop the 9211 inside modules

    3. has created the fpga in interface file with and compiled with no error.

    4. interfaced with the file fpga at almost exactly the way the sample project of "getting started with 9211' by using the engine of analysis in the interface with the other modules.

    5. after the errors to discover that I created a VI that tests for just the portion 9211 code (called "thermocouple FPGA method Test.vi")

    You can try making sure that the chassis is set to mode Interface FPGA and the setting is deployed.  I wrote that article that you referenced says will select the deploy option later and not explicitly speak to deploy the chassis later.  Run a VI with a reference open FPGA vi not automatically deploy chassis settings if you need to do it explicitly.  Try the following steps.

    1. right click on the frame element and select Properties.  Make sure that the Interface FPGA option button is selected. \

    2. right click on the frame element and select deploy.

    3. repeat your VI.

    The data returned by the interface fpga was nothing else than zeros on all channels, even if thermocouples were hooked on some of them. (all zeros as entries in the convert temperature vi gives-410, 6160 degrees F, if you happen to have the material to try this.)

    I get the following error from the open fpga vi reference:

    code error-61141

    "Thermocouple method Test.vi FPGA.
    Activities FPGA:

    Open FPGA interface reference.
    Reserved for LabVIEW FPGA outside: The RIO Scan Interface is running. You must set the mode Interface FPGA chassis in order to unlock the FPGA. »

    The likely cause of this error is that the setting of the FPGA Interface on the chassis has not been deployed.  If the chassis is still Mode Scan fixed personality bitfile will be loaded on startup and the FPGA will be locked.

    It's extremely frustrating, because as I explained, I've been very attentive not only follow the instructions for concurrent fpga and analysis but also to model my VI by the example of VI, even if only for the moment, just to try to work things out.

    I'm sorry that you have had difficulties.  Assuming that I'm wrong about the source of your problem, it seems we have to update less than Ko to include the deployment step.

    Any help would be appreciated as I need to fix this for the further development and I am somehow in a lack of time. I opened a support ticket (reference #7256226), but the app engineer had no time to answer.

    My system:

    cRIO-9014 controller RT with crio-9104 bottom of basket.

    LabVIEW 2009

    Latest drivers and peripheral software pc and rio (RIO scan 3.2 engine support june2009)

  • PIC-7344 causes error-70095 in MAX

    I have install NI PCI-7344. MAX 5.1 application firmware update. I did:

    7.20.3008 to 7.40.3003 68331

    DSP of 7.10.3003 to 7.32.3003.

    I can't initialize the card. MAX throws "error-70095 (NIMC_DSPCommunicationsTimeoutError) occurred in ConfigVectorSpace on 1 coordinate." Internal error. There was an internal timeout when sending commands to the DSP. "It happens 2 cards in a row. They are the new cards. I thought that they work.

    Please help me to overcome this error.

    Thanks in advance.

    I try Greg sugesstion. It works very well. Thank you very much.

    Then the button [update Firmware] downloaded and flashed 4 firmware drivers for me: 7.40.3003 (68331), 7.32.3003 (DSP), 7.10.3003 (FPGA1) and 7.00.3001 (FPGA2). Different drivers between FPGA1 and FPGA2 is the cause of the problem. Right-click on the FPGA1 of the right list box item and choose 'download to device '. Initialization functions very well after that.

    Yet once again, I appreciate your help and your time.

  • Update causing error problem"ssing or 32\DRIVERS\pci.sys corrupt system"

    Original title: update the problem cause

    After updating major on XP, cannot restart. Emergency start screen goes to "missing or damaged system 32\DRIVERS\pci.sys. How can I move from this screen to allow the use of the Windows CD-ROM to allow the repair to activate? Help gratefully received.

    PCI.sys error when Windows starts

    Problems with damaged or Incompatible hardware with Windows XP
    http://support.Microsoft.com/?kbid=330181

    Windows could not start because the following file is missing or corrupt:
    System32\DRIVERS\pci.sys
    Setupdd.sys could not be loaded. Error code 4.
    -or-
    Setupdd.sys could not be loaded. Error code 7.

    When you start Windows, you may receive an error similar to:
    File is missing or corrupt: C:\Winnt\System32\Drivers\Pci.sys

    To restore the file, perform an upgrade on the spot or expand the file from the Recovery Console:
    1. start the Recovery Console.
    2 select the installation that you want to access.
    3 enter the administrator password.
    4 entry card to determine the drive letter assigned to the CD-ROM.
    5 type: Expand, CD-ROM drive>: \i386\pci.sy_ c:\Winnt\System32\drivers/y.
    You should receive:
    PCI.sys
    1 file (s) expanded.
    6 type exit to complete the Recovery Console.

    Install and use the Recovery Console in Windows XP
    http://support.Microsoft.com/kb/307654

    The above is my notes on Windows XP - no guarantee

  • Why the transition from the server causes error?

    I reported the error to the it Department, they respond as indicated below:

    "These errors are the result of a transition from server we are currently experiencing. As soon as the server transition is complete errors should stop. »

    «The transition of the server error has to do with displacement of the IP4 to IP6.» All pages work technically, but if you happen be routed through IP6 instead of the IP4, some of our pages will not appear due to firewall issues. »

    Does anyone have suggestions on what causes the error of IP4 to IP6?

    Thanks in advance for your suggestions

    -----------------------------------------------------------------------------------------------------------------

    Detailed description on the report of mail as shown below:

    Referring to the following link, some images cannot be display on 29 October.

    http://I1093.Photobucket.com/albums/i438/junk000/Error2.jpg 
     
     
    The other day, when I try to click on the following link and open it using IE8, the response is slow and getting the error on
    "Web Page error: 502 Bad Gateway!" with frontispiece USGS URL resolution error
    Please see the link for more information.

    http://I1093.Photobucket.com/albums/i438/junk000/error-6.jpg

    Do server not able to response to the loading of the web?  Is there anything to improve his performance on the server?

    Support is located in the Windows Server Forums:
    http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

  • Windows XP pro SP3 Ver.2002, frequently reboots with error product 256_1

    Please give instructions on how to resolve the following error message:

    BCCode:24 BCP1:001902FE BCP2:B84FF294 BCP3:B84FEF90

    BCP4:B7DD2921 OS Version 5_1_2600 SP:3 product 256_

    I've been uneable to find all instructions in the forums

    Hi Nicolas,.

    ·        You did it all change hardware or software on your machine before this problem?

    ·        The computer restarts when you use a particular application?

    This error message is caused by a kernel driver that is installed by spyware programs following known rootkit:

    ·        Msupd5.exe

    ·        Reloadmedude.exe

    You can follow this link & check if the problem persists.

    The computer may automatically restart, or you may receive a "serious error" message or a stop error message in Windows Server 2003, Windows XP, or in Windows 2000

    Hope the helps of information. Please post back and we do know.

    Concerning
    Joel S
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Reboot the error message

    A windows update has been done today & the screen message says that I had to restart the computer - or I could see up to 4 hours.

    I did as described, but even after reboot, the same message reappears & cannot be deleted, even if the operation was performed twice.

    Windows updates may be damaged already. We suggest that you go to the registry to delete a key that may be a cause of this problem.

    1. press Windows + R on your keyboard and type regedit.
    Before continuing, make sure you do a backup first. (Go to file - export - Save it to your desktop)
    2. go in HKEY_LOCAL_MACHINE > SOFTWARE > Microsoft > Windows > CurrentVersion > WindowsUpdate > automatic update

    3 on automatic update, you should see "RebootRequired.
    (When running Windows Update, it creates the RebootRequired key. Once the Windows updates is complete, it must automatically delete this key. Corruption occurs when this key not deleted and you end up with the required reboot loop).

    4 delete this 'RebootRequired' key, and then restart.

    Let us know how it goes.

    Thank you.

Maybe you are looking for

  • How to cross "Untrusted connection" without a "I accept the potential risk. ?

    I know that this question has been answered many times, but after googling I still many solutions cannot solve the problem. Just a bit of context: I bought a new laptop from windows (2 weeks) and for the first week, access my hotmail was fine. I just

  • Airport utility main screen status...

    Setup Wan w/2 AirPort Extreme & work great! The devices displayed on the main screen of the airport utility, Internet-> airport-1 is the continuous line, connection from the airport-1 - > 2 - of the airport is dotted. What is this average, solid vs d

  • using a friends computer to synchronize the old phones and ipod

    Please if anyone can help me with this I would appreciate it. My laptop is dead and I use my phone to friends.  I want to synchronize my more old phones & ipod which has all my music which has been purchased and downloaded from my cd and then sync it

  • by filling program or show / hide control enum or ring options

    Hey guys,. So my problem is that I have a list of songs I want to something like an enum or control of the ring, the user will have to click an option, and something will happen to each selection. the program will be a lot of pages where the enum/rin

  • ID Ueye_api.dll file is not found in system32

    I downloaded the software for Labview Ueye and installed. I did a VI using the API Ueye and everything was still fine. But everytime I open my VI which contains the API of Ueye application, I receive requests to locate Ueye_api.dll However, when I lo