File missing Netlogon after installing MS Win Svr 2012

Similar Questions

• Cannot open/save to files and programs after installing Windows updates

  original title: Windows Update - major problems

  My daughter has an HP laptop.  She has downloaded the Windows updates and now she can't open most of its programs.  Those that it can open, will not work correctly.  Some won't let him save, some will leave him no open files she saved in them.  If she tries to delete any program in the Control Panel, add and remove, she receives a message that there is a mistake and that the program has already been deleted. (Even the programs that it can open, but do nothing). Some of its programs to tell him that she is missing a .dll file.  If she found on the Internet and she sees something she wants to save, she used to be able to right click and save, now it does not get the dialog box when it right click.  She uses Firefox not Internet Explorer.  When she downloaded updates, the resarted the computer as usual, but when he arrived at stage 3 of 3 it locked to 0% (with NO hard disk activity) and would not go further.  She let it harden for more than half an hour and finally pressed the power button to force it to turn it off.  When she turned her back on updates have continued as usual.  Is there a undate for the Wacom which was attached to the computer at a time. Everything worked fine before she comes to install the updates.

  Hello Mel_F,

  Thanks for your post.  Initially, we will execute the file system checker.  If that does not solve the problem, the next is to perform a Startup Repair.  Please let us know the results of these utilities so that we can help you get this resolved.

  See you soon

• Files muliple lost after installing McAfee

  original title: I lost all my files and my computer's configuration when he started upward.  Is it possible to recover?  I can find a few documents in the file recently modified.  But I can't find them in my documents.

  I recently installed a new version of macafee and restarting the computer, my computer scanned all my files and then started acting really weird.

  Did you uninstall the old version of the anti-virus you had installed 1, before installing the most recent McAfee?

  If you haven't done so already, maybe that's the problem.

  I can say to do a restore of the system; info below.

  But I would have preferred contact you McAfee 1, as long as the problem began after their latest AV program installed.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Try a system restore to a Date before the problem began:

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  See you soon.

  Mick Murphy - Microsoft partner

• Missing utilities after installing SSD and restoring from Time Machine

  Today, I installed an SSD on my mid-2012 13 "MBP (Mavericks running) and then ran the restoration of service Time Machine to bring back everything that I used. All right, except that now I have discovered that Time Machine never backup my Utilties like disk utility, same Terminal is missing.

  I have a bootable USB with the Mavericks installation app on it, but now if I run, it's going to destroy everything Time Machine has done to restore (my CC Adobe apps and plugins, for example)? I would upgrade to El Capitan, but I use an old Wacom which does not have the drivers for the last OS X, so I'm stuck for now (do not want to buy a new Wacom immediately).

  Any ideas on how I can get these dos utilities without using the re - install or upgrade process? I watched the old backups TM and they aren't there either.

  You will have to reinstall the operating system to get the dos utilities.

  Start of recovery volume (command - R on a restart, or hold down the option/Alt during a restart and select the Volume of recovery). Run the check/repair disk utility and repair permissions until you get no error. Then re-install the operating system.

  OS X recovery

  OS X recovery (2)

• Portege T110 - microphone does not work after instalation of Win 7

  I have the same problem. The microphone worked perfectly for more than 2 years, then I reinstalled WIn7 and since then, the microphone is not picking up all the sounds and nothing also when I plug in an external microphone. Very annoying, because it was previously accessible perfect. I have the default Windows HD audio driver - is there a driver Toshiba I have use shlould

  model is Portege T110

  Portege T110 is unknown to me, but it seems that this series has been published in Asia.
  So checked the Toshiba Asia page and found this:
  http://PC.Toshiba-Asia.com/SG/support/drivers

  You will find the Portege T110 and drivers Win 7.
  The laptop seems to support the audio driver Conexant so download and install on the system.

• RAW files missing changes after moving to an external hard drive

  Hi, I use lightroom 4 and I cleaned a part of my images on my laptop and then exported in JPEG files. My hard drive has started to fill up, so I moved all my files on raw on an external hard drive but now when I come back to make adjustments to these images it tells me that the file is missing. How the raw return file so that it shows the changes I made?

  The changes should have been stored in the catalog file or in an XMP Sidecar file. Also moved the XMP Sidecar files. These XMP files can be marked as system files in OS X, and unless you have show system files (which, with OS X for that option and turn it you may need to use Terminal), and or display all files, Finder can hide on your part.

• NB550D - no internet connection after instalation of Win 7 64 bit

  Please help - so frustrating:

  Have my NB550D upgraded Windows 7 Professional 64 bit to take advantage of 4 GB of RAM

  Now, I have no internet connection and cannot figure out what to do.

  I downloaded a driver, but says it cannot install because there is no card INTEL (R)

  Help, please!

  Thanks for the clarification!

• VMX file is corrupted after installing Fusion 6 and Windows 7

  Please could someone help? I did the installation tonight of Fusion 6 and Windows 7 on a Mac with the Mavericks. Everything was fine until I stopped melting earlier. I went back to try to connect to windows, and I get corrupted file VMX. I looked in the Knowledge Base, and I tried the suggestions I could find, but now I'm afraid, I could really do more harm then good. Please any help would be appreciated.

  Have you tried to change the screen resolution in Windows?

  Or try activating / disabling the display settings in the Virtual Machine settings, uncheck 'Use the full resolution for the Retina display' and 'automatically adjust the size of user interface in Windows. Restart Windows, and then recheck the settings.

• Changes of association of PDF files using Acrobat after installed Acrobat

  Hello

  I packed a silent installation of Acrobat Professional X by using the Customization Wizard.  We make the player the default viewer (without the help of a script after the installation).  No matter which option to choose for the default viewer in the customization tool (as shown below), Acrobat Professional X becomes the default display.  I'm trying to add or change the Installer database table so that he leaves the current association with the reader.

  

  Any ideas?

  Thank you

  Simon

  Hi Simon,.

  Try this please.

  Msiexec /i AcroPro.msi IW_DEFAULT_VERB = Read/QB-TRANSFORMS = Acropro.mst

  It should work.

  Kind regards

• Series of HP Pavilion 500 PC - 201 a, some missing software after installing windows 7

  Here's my hardware ID.

  HP Pavilion 500 PC series

  Model No.: 500-201 a

  Windows 7 64 bit

  PCI\VEN_1814 & DEV_3298 & SUBSYS_18EC103C & REV_00
  PCI\VEN_10EC & DEV_8168 & SUBSYS_2AF7103C & REV_0C
  PCI\VEN_1814 & DEV_3290 & SUBSYS_18EC103C & REV_00

  Any help would be appreciated

  Hello

  Please try:

  1 PCI\VEN_1814 & DEV_3298 & SUBSYS_18EC103C & REV_00
     http://ftp.HP.com/pub/SoftPaq/sp58501-59000/sp58944.exe

  2 PCI\VEN_10EC & DEV_8168 & SUBSYS_2AF7103C & REV_0C
     http://ftp.HP.com/pub/SoftPaq/sp64501-65000/sp64531.exe

  3 PCI\VEN_1814 & DEV_3290 & SUBSYS_18EC103C & REV_00
     http://ftp.HP.com/pub/SoftPaq/sp59501-60000/sp59828.exe

  Kind regards.

• Missing drivers after installing Windows 7 Enterprise

  HW IDs:

  1. base system device

  PCI\VEN_197B & DEV_2392 & SUBSYS_17AB103C & REV_30
  PCI\VEN_197B & DEV_2392 & SUBSYS_17AB103C
  PCI\VEN_197B & DEV_2392 & CC_088000
  PCI\VEN_197B & DEV_2392 & CC_0880

  2 PCI Simple Communications Controller

  PCI\VEN_8086 & DEV_1E3A & SUBSYS_17AB103C & REV_04
  PCI\VEN_8086 & DEV_1E3A & SUBSYS_17AB103C
  PCI\VEN_8086 & DEV_1E3A & CC_078000
  PCI\VEN_8086 & DEV_1E3A & CC_0780

  3. USB controller

  PCI\VEN_8086 & DEV_1E31 & SUBSYS_17AB103C & REV_04
  PCI\VEN_8086 & DEV_1E31 & SUBSYS_17AB103C
  PCI\VEN_8086 & DEV_1E31 & CC_0C0330
  PCI\VEN_8086 & DEV_1E31 & CC_0C03

  4 unknown device

  ACPI\HPQ6000
  * HPQ6000

  Help, please!

  Thank you!

  Hello

  The pilot, you need are:

  1 JMicron card reader

  2 Intel Management Engine Interface

  3 Intel Chipset Driver

  4 HP 3D drive guard

  You should be able to locate these on your product Page which you can search laptops here.

  If you have any problem to find these drivers, post back with the complete model number and Nr of the laptop (from under your laptop service tag)-see here for an explanation and if you have an installation of 32-bit or 64-bit Windows 7.

  Kind regards

  DP - K

• No sound after installing windows 10 MBP 2012

  Hello world

  Here's what I did.

  I have MBP 2012 with El Capitan on it.

  I installed windows on this 10. Here are the steps I followed.

  1. Plist file modified to allow the creation of iso windows 10 on USB for my MBP (PreUSBBoot USBBoot and 2 other usual changes)
  2. ISO file 10 Windows installed
  3. Make a key USB bootable but Bootcamp with drivers
  4. Use disk utility to partition the drive for windows (reason - because it gives error while installing windows, windows MBR EFI only on device TPG error)
  5. Restarted my MBP used and selected EFI boot option key (as when installing windows in Bootcamp, it gave an error saying no device found startup)
  6. Installed Windows and driver loaded by installing bootcamp
  7. Everything works fine but the sound

  Tried, but failed

  1. Clean install of windows if partition bootcamp (error - no found boot device)
  2. Boot EFI (error - error EFI GPT MBR, windows can be installed only on TPG error)
  3. Tried the update of drivers for the sound. However, did not

  Please help me with the steps to solve this problem. In addition, windows is not activated is there any way through which I can still get windows 10 free.

  Change the Info.plist file is incorrect. Your MBP 2012 takes in charge the two, USB and DVD facilities. Please use BCA and remove the current installation. Installation of Windows using boot EFI on a preUEFI machine will cause more problems.

• After installing Ubuntu 11.04, Windows Vista has disappeared.

  Original title: Windows vista is missing

  After installing Ubuntu 11.04 (Natty Narwhal) my other OP system Windows vista has disappeared. I don't get a menu to choose which OP system I want to use. The grub menu 2 does not include an entry for windows. My computer directly boots into Ubuntu. I tried to put the installation disc in the status bar to try to recover the system but nothing works. Can someone help me please? Isetta cordially.

  Hi Isetta,

  It seems that after installing Ubuntu, grub 2 took control of Boot Manager and changed the boot sequence. To change the startup entries to get Vista, you must contact Ubuntu for assistance on changing the grub boot entries 2.

  You can see the following link to get in touch with Ubuntu.

  Ubuntu Forum

  Hope this information is useful.

• on dv6 fingerprint reader has stopped working after installing Norton 2012

  Fingerprint reader has stopped working after installing Norton Internet Security 2012 on both of my notebooks from HP.

  Product name: HP Pavilion dv6

  Operating system: Windows 7 64-bit

  Error message in Device Manager under biometric devices in Device Manager displays an exclamation mark beside validity sensors (WBF) (PID = 0018). The following message is under the general tab: "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) ».

  Driver is present and seems to be up-to-date.

  Appreciate your help.

  I have finally isolated the problem of my software lack of HP dv6 fingerprint reader. I think Norton Removal Tool, available online at www.symentec.com/nrt, was the reason. I am sure this conclusion because the exact same problem occurred after I installed Norton Internet Security 2012 on laptop HP same as my wife. I tried, in vain, to uninstall and reinstall the driver for the biometric fingerprint device provided by Validity Sensors, Inc.

  After spending a day and a half to try to "solve" the problem, I decided to restore my system and go back to the prior agreement of the point of the installation of Norton. Thank you HP to make this process quick and painless. Don't forget that if you installed anything after the restore point, it will have to be reinstalled.

  Fortunately, there's a less intrusive on CD of Norton removal tool. This utility uninstalls an older version of Norton you are requested to restart and then installs the latest NIS. It is a method of removal safer that wide brush offered by the Norton Online link, which wipes everything remotely suspect.

  After reinstalling Norton Internet Security 2012 from the CD, everything works as it should, including the fingerprint reader.

• Disc Association file missing after installing windows 7 SP1,.

  After installing windows 7 SP1, trying to open the drives C, D, F, I get error message cannot open, lack assocition file, can someone tell me how to solve this

  Restore the Type Associations by default Windows 7 file Extension:
  http://www.SevenForums.com/tutorials/19449-default-file-type-associations-restore.html

  Change the programs that Windows uses by default:
  http://Windows.Microsoft.com/en-us/Windows7/change-which-programs-Windows-uses-by-default

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.