Film of recent travel photographs. I added sound and try to burn it to a DVD-R disc to show on our TV.

Similar Questions

• I recently bought the canon 6 d and try to open my through my cs5.1 photoshop raw files but it does not open. I tried to reinstall and update my camera raw. Help, please

  I need help my raw cs5.1 to open file

  I have windows and mac, but it won't work for both.

  Help, please.

  Devices supported by Camera Raw

  Make sure that you have cab 7.3 or later

  If you still have the problem, download and install the Adobe's DNG Converter for free and use it while you are looking for a solution for the problem of ACR.

• When I try to burn a movie, my computer shuts down. This didn't happen with more short films, but this one is about 84 minutes.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  When I try to burn a movie with videos imported from different sources, the computer shuts down after 10 minutes.

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  limespider wrote:
  When I try to burn a movie, my computer shuts down. This
  didn't happen with more short films, but this one is all
  84 minutes.
  =======================================
  Sounds lke a question of system resources.

  Large, complex projects can cause problems... it can
  be worth a try to create several small projects and save
  each of them in the format .wmv movie to a folder on your hard drive
  drive. When you import clips .wmv collection in DVD
  Machine to each of them becomes a scene (chapter)... you can
  have up to 18 scenes.

  Besides rendering video is time CPU and could
  initially be an overheating problem that could also result in your
  computer to close.

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Added "ublock" and redirect cleaner"now I can't connect to my MLB account com on the main page.

  I can't access my MLB.com account. When I click on the connection icon, nothing happens. I've had this account for years and it has worked before. I recently added UBlock and Redirect cleaner. Is there a way to identify the cause and correct it?

  Hello

  I assume from what you say that one of the two Add-ons blocks perhaps inadvertently MLB.com to open.

  I would recommend that you take a look at the parameters of both of these modules and set the page of MLB.com , want to get on an exceptional basis to allow him to cross.

  I hope this helps, but if not, please come back here and we can look at another solution for you.

• I added Wikipedia and Wikivoyage to my search engine and the icons are not there. How can I add them?

  In the search in the top right of my browser, I recently added Wikipedia and Wikivoyage as options, but the icons are not there. Instead, I have a blank white page instead of the icons. How can I fill them in?

  This also happens on my laptop which is a Macbook Air, so it's not limited to the Windows 7 version of Firefox.

  When there is no data icon in the XML file, then Firefox will be able to display such an icon.

  Try adding on Mycroft Project website search engines.

  • http://mycroftproject.com/search-engines.html

• Satellite S50T-B - adding RAM and swapping HDD to SSD

  Hello

  I recently bought portable satellite S50t-B and have a few questions about the upgrade:

  1. What is the recommended RAM to add (8 GB)

  2. What is the DVAR to add?

  3 are there instructions for adding more RAM and an SSD for my laptop?

  4. I void my warranty by installing more RAM and exchanging the current hard drive for an SSD?

  Thank you for your help

  Can you please send name of full model of your laptop? (S50T-B-xxx)

• Satellite L555 - 11L - Sound and keyboard problem

  (1) 2 months after the purchase, laptop began screaming sound. He brought back to Fnac, they restored the system. The screeching starts now if the level of speakers is higher than 50% or if I plug headphones with microphone. Making it difficult to use Skype. What could be the cause?

  ((2) recently, keyboard became slow - Return key and SPACEBAR react unless you press several times and 'double letters' (repeat) will not work unless I stop everything first before typing the new letter--regardless of the letter). I tried to change the properties of keyboard long/short, delay/frequency, no difference. Browsing the forum, I noticed that + users with similar problems also have a computer laptop french keyboard +. Would he be there? What should I try how can I set the properties of the keyboard, anyway?

  Thanks for help.

  Hello

  Are you running the factory settings or did you do your own installation of Windows?

• Satellite L300D PSLC0C - need to sound and display driver for Win XP

  Hello everyone

  I have toshiba Satellite L300D PSLC0C.
  I recently installed Windows Xp on it and now I'm not able to get the display driver and audio drivers.
  I tried after the display drivers and sound respectively, but they both failed to install
  [Display driver | http://eu.computers.toshiba-europe.com/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 2 & selSeries = 178 & selProduct = 784 & selSho rtMod = null & language = 13 & selOS = 10 & selType = 11 & yearupl = DST & monthupload = & dayupload = & useDate = null & mode = all Machines & search = & action = search & macId = & country = 4 & is lectedLanguage = 13 & type = 11 & page = 1 & ID = 63947 & DISO = 10 & driverLanguage = 42]
  [Driver sound | http://eu.computers.toshiba-europe.com/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 2 & selSeries = 178 & selProduct = 784 & selSho rtMod = null & language = 13 & selOS = 10 & selType = 42 & yearupl = DST & monthupload = & dayupload = & useDate = null & mode = all Machines & search = & action = search & macId = & country = 4 & is lectedLanguage = 13 & type = 42 & page = 1 & ID = 63958 & DISO = 10 & driverLanguage = 42]
  Also I get an exclamation with PCI device and Bus SMB controller in Device Manager. I tried following Chipset utility, but it did not work.
  [Chip Set Utility | http://eu.computers.toshiba-europe.com/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 2 & selSeries = 178 & selProduct = 784 & selSho rtMod = null & language = 13 & selOS = 10 & selType = 94 & ADOs = yearupl & monthupload = & dayupload = & useDate = null & mode = all Machines & search = & action = search & macId = & country = 4 & is lectedLanguage = 13 & type = 94 & page = 1 & ID = 63940 & DISO = 10 & driverLanguage = 42]
  I'm really looking forward to any help on this

  Hello

  Because the laptop uses the ATI graphics card, you will need to install the driver of ATI graphics card. I think that you need the driver for the ATI Radeon X 1200 control some pages like omegadrivers.net and similar
  The chipset driver is an ATI due to AMD CPU driver.

  Audio driver seems to be Realtek.
  I recommend that you visit the page of Realtek and download the driver of the page.

• Tecra 9100: No sound and unknown device

  I have the laptop above and have recently flattened and reinstalled Windows XP pro. I have no sound, I have a speaker in my sys tray, Device Manager detects the card Intel (r) 82801 CA/Cam AC'97 Audio Controller, after I installed the RealTek AC 97 drivers. I plugged in the headphones to make sure that this is not not the speakers who have blown. But still no sound. All volumes are turned upward and the volume on the front wheel is set in the middle. In sounds and audio in the Control Panel, all volumes are increasing and the speakers are set to portable stereo speakers.

  Any ideas?

  I have a unknown devices in Device Manager States location is a system compatible ACPI Microsoft from what I see on Google it's something to do with the battery. Once again any ideas?

  Thank you

  I know that your laptop. It s a Tecra 9100 and this laptop supports a Yamaha YMF753 - stereo 16-bit Sound Blaster Pro compatible sound card.

  The problem is the XP SP1 or SP2. The audio driver of Yamaha does not support SP1.
  Seems that you need to update the audio driver.

  Please check this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=24622

  and

  This Toshiba solution site:
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/FAQ.jsp?service=EU&FID=TRO0000001b59

• Equium-A100-147 - broken sound and video

  Hello world

  I have the satellite A100-147, its working well for the past couple of year.
  But in recent weeks has get problem in sound and video (broken sound and video).

  The sound is breaking and sometimes uable to listen + video and so delay breaking due to her with so much sound so slow EEG distortion etc...

  This remains even after the new Wind XP (format HARD drive) installation impossible to fix installed new drivers.
  Shows Device Manager all drivers including audio and video work ok, nt know what who is problem please help me.

  Thank you.

  Have you noticed the high HARD drive activity when this happens (blinking HDD LED permanently)?

• Qosmio F10 - driver of sound and the modem does not install

  Hi all.

  Firstly, my computer is 100% up-to-date. I recently had to do a complete reinstall of my OS
  I got all my drivers and what not, install, but the driver sound max and the modem driver will not install.

  For the modem, it asks if I want to install it, I click Yes and it starts the installation and then he finshes and nothing comes. It is not installed.
  I then try my sound, and it seems as if it will install, but then I get an error that says: no driver is found, please reboot your computer.

  Or something around those lines anyway.

  Can someone help me please?

  Hi, have u tried in safe mode. Why do not you download the latest drivers? You can try this site http://driverscollection.com/?H=Qosmio%20F10&By=Toshiba

• lost my sound and now I have this error # 0X800A0ice

  My Windows Internet gave me the local problem.

  Then I lost my sound and now I have this error # 0X800A0ice.

  Need help now.

  Hello

  1. what operating system do you use?

  2. what version of internet explore do you use?

  3. What is the exact error message you received?

  4 did you change on your computer?

  I suggest you follow the link and check.

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  How to optimize Internet Explorer

  http://support.Microsoft.com/kb/936213/ro

  WARNING: Reset Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

• Problems with sound and Audio - realtek hd audio is not compatible for the audio device

  I use Windows XPand receives my sound and audio to work, I got a lot of response to this problem, but not the right answers, I got my sound set correctly but my audio does not work. In my default audio device is defined as realtek hd audio that is not compatible for the audio device, I tried to remove it without any success because I don't know what else can be done to solve this problem. I did an update can also be found a update driver for my sound card in windows. I also run microsoft fixi it and said that my default audio device is wrong, I tried to change, but nothing seems to work. Before that my computer was working fine and now all of a sudden nothing works. Everthing is up-to-date on my computer except the I'm having problems. all I ask you, how can I removed realtek hd audio since I graduated from the audio device by default.

  Thanks for a quick reply.

  Hello

  You will remember to do recent changes to the computer before the show?

  I suggest you to download and install the latest driver audio realtek for Windows XP from the link and check if the problem occurs:

  http://www.Realtek.com.tw/downloads/downloadsCheck.aspx?langid=1&PNid=24&PFID=24&level=4&Conn=3&DownTypeID=3&GETDOWN=false

• LabVIEW 8.6 sound and measure suite not installed properly under Vista 32 or 64 bit

  I apologize if this isn't the right place for this post, but I need a solution. I recently bought LabVIEW 8.6 Developer Suite with the Suite Sound Measurement and to create a program of NVH testing at my company. I am a newbe to Labview, but I've been a programmer/hardware geek since the days of the TRS-80 model1. Here's my problem. I installed the following developers DVD package on my Office Windows XP Professional and all goes well. I see the following Sound and Vibration Measurement listed under LabVIEW 8.6 able & Automation Explorer, and examples of the Toolbox for work in LabVIEW. When the laptop I bought to do my current job came with a Vista Business Edition 32 bit version installed I found the following problem. On this machine and two other machines to Vista (64-bit and a 32 bit) I tried, the installation does not record the Souind and vibrations under LabVIEW 8.6 Suite and they show Sound and Vibration toolkit as not installed in the examples section. In the Panel by virtue of National Instruments, all 4 machines show the Suite Sound and Vibration as installed 6.0. I have tried to uninstall, reinstall, change in the control panel and reinstall from DVD without change in the result. I really need get the laptop works as it's my real development and test machine. XP Setup is not an option because the machine newly purchased with a high-end sound system and downgrade XP was not available. I'm out of ideas.

  I wanted to close what I got it finally works. This time, I uninstalled the audio and vibration of the LabVIEW control entries in uninstall Vista. Then re-installed and now it works. Before there were three entries, one for the suite, one for the runtime and one for the Toolbox. After having removed all three and reinstall it from the DVD, only subsequently arises, and everything seems to be good.

• I can't change "sounds and audio devices" in the Panel

  original title: I can't change "sounds and audio devices" in the control panel after the update my card NVIDIA vidio driver and Microsoft DirectX in my Windows XP SP3 update.  How can I fix it?

  I recently updated my card (NVIDIA GeForce 6800 GT) video driver and Microsoft DirectX after you have experienced a problem with a casual game.  That fixed the problem, but then I noticed that my sound 'e-mail notification' had failed in its original supplied with Windows.  I changed "Sounds and Audio devices", registered, registered as a new regime, etc., and still plays the old default Windows sound.  It was the only noise I had on Windows.  When I check "Sounds and Audio devices", the sound, I have chosen is the one listed, and it does not play when I check, but when the mail arrives, I hear the old Windows by default.  I don't know if the updates, to happen or not, caused only that it took place at the same time.  Thanks for any help you can give.

  Thank you for your suggestions.  It turns out that my e-mail client, "Eudora", had somehow reset the default mode in the Windows sounds.  I forgot that there is a choice to "Be careful" in Eudora Tools.  After I changed it back, it worked perfectly.  Once again, thank you to answer me.