Finished SystemToast SIGNAL not

Similar Questions

• Satellite A100 - signal not supported from PC to TV

  Hello

  I have a Satellite A100-SK8 I used to connect it to my Sony 40v2500 using a cable of AVG. However, recently it will no longer connect and I get the mesaage "signal not supported set the output to your pc" on the TV. I use the same cable to connect my another PC to the same TV and it works correctly.

  Any help is very appreciated!

  Thank you
  Shain_20

  Hi shain_20,

  Can you explain which is an AVG cable? I've never heard of this

  In any case, he s strange that he doesn t work then you change some parameters of display or any other driver/software driver?

  Maybe reinstall the display driver could help...
  Usually, you can switch between monitors using the FN + F5 key combination.

• When I tried to import pictures from my camcorder videos seem to be import of Strontium.  After finished importing is not found the videos at all.  Any ideas?

  When I tried to import pictures from my camcorder videos seem to be importing into "Strontium".  After finished importing is not found the videos at all.  Any ideas?

  What is "strontium"?

  There are 9 different versions of iPhoto and they run on 10 different versions of the operating system. Tips and tricks for dealing with issues vary depending on the version of iPhoto and the version of the operating system. In order to get help, you need to give as much information as possible. Include things like:

  -What version of iPhoto.

  -What version of the operating system.

  -Details. Full, a description of the problem as you can. For example, if you have a problem with export, then explain by describing how you try to export and so on.

  -History: Is it going hard? Everything has been installed or removed? -Are there any error messages?

  -Have what measures you already tried to solve the problem.

  -Something unusual on configure your? Or how you use iPhoto?

  Anything else you can think of that could help someone understand the problem you have.

• Export of signal not cleared after erasing the task.

  Hello

  I'm a newbie DAQmx. Material: LabVIEW 8.6.1 with a USB-6251

  I just put a Signal.vi of export DAQmx in the example of the impulse to dig of Gen.  He rerouted properly to the PFI cntr0 I chose but also left the default connected.

  I removed the Signal vi export and represented the Pulse.vi Gen digging and found that the IFP had routed I always responded.  Can someone tell me what's supposed to happen?

  More KB of aNItaB (which is a great resource whenever you are looking to export signal) note this counter output uses a "lazy uncommit' on the output terminals. Basically once you send a signal somewhere it will be routed to this line until you reuse this PFI line for something else. You can lighten the device reset routing, or just tristating line using the output Terminal.vi Tristate DAQmx.

  See you soon,.

  Andrew S

• onPeekStarted and onPeekEnded signals not firing

  Here's a simple QML which shows that the onPeekStarted and onPeekEneded signals not shooting. What I am doing wrong?

  NavigationPane {
      id: navigationPane
      Page {
          Container {
              Button {
                  id: button
                  text: "Navigate"
                  onClicked: {
                      var page = pageDef.createObject();
                      navigationPane.push(page);
                  }
              }
          }
      }
      attachedObjects: [
          ComponentDefinition {
              id: pageDef
              Page {
                  id: secondPage
                  Label {
                      text: "Second page"
                  }
                  paneProperties: NavigationPaneProperties {
                      backButton: ActionItem {
                          title: "First page"
                          imageSource: "back.png"
                          onTriggered: {
                              navigationPane.pop();
                          }
                      }
                  }
              }
          }
      ]
      onPopTransitionEnded: {
          page.destroy();
          button.text = "Page destroyed"
      }
      onPeekStarted: {
          button.text = "peek started";
      }
      onPeekEnded: {
          button.text = "Peek ended";
      }
  }
  

  Reading the documentation, the onPeekStarted and onPeekEneded signals are sent to the Page and not the NavigationPane. It makes sense that the Page is the component that is to be read on.

  
  NavigationPane {
      id: navigationPane
      Page {
          onPeekStarted: {
              button.text = "Peek started";
          }
          onPeekEnded: {
             button.text = "Peek Ended";
          }
          Container {
              Button {
                  id: button
                  text: "Navigate"
                  onClicked: {
                      var page = pageDef.createObject();
                      navigationPane.push(page);
                  }
              }
          }
      }
      attachedObjects: [
          ComponentDefinition {
              id: pageDef
              Page {
                  id: secondPage
                  Label {
                      text: "Second page"
                  }
                  paneProperties: NavigationPaneProperties {
                      backButton: ActionItem {
                          title: "First page"
                          imageSource: "back.png"
                          onTriggered: {
                              navigationPane.pop();
                          }
                      }
                  }
              }
          }
      ]
      onPopTransitionEnded: {
          page.destroy();
          button.text = "Page destroyed"
      }
  }
  

• finished QNetworkAccessManager signal is not shooting in expansion bb10

  Hi all

  I created plugin (native extension) network in which there is a file moc also to load the slot of signal feature. This extension is done following tasks:

  1 entry for Javascript.

  var jsonData = {"url": "'https://cors-test.appspot.com/test ', "timeOutValue": 4"};

  2 launches a thread extension and call the function of demand on the system from here. Here is the code snippet for same.

  void* SignalThread(void* parent) {
      TemplateJS *pParent = static_cast(parent);
  
      int argc = 0;
      char **argv = NULL;
      QCoreApplication QCoreApplication(argc, argv);
      webworks::TemplateNDK *m_signalHandler = new webworks::TemplateNDK(pParent);
      m_signalHandler->doNetworkRequest();
  
      QCoreApplication::exec(); //When I try to remove this line extension stops working and when I try to implement quit, application closes.
      delete m_signalHandler;
      return NULL;
  }
  
  bool TemplateJS::StartThread(){
  
      pthread_attr_t thread_attr;
      pthread_attr_init(&thread_attr);
      pthread_attr_setdetachstate(&thread_attr, PTHREAD_CREATE_DETACHED);
  
      pthread_t m_thread;
      pthread_create(&m_thread, &thread_attr, SignalThread, static_cast(this));
      pthread_attr_destroy(&thread_attr);
      if (!m_thread) {
          return true;
      } else {
          return false;
      }
  }
  

  3 doNetworkRequest function more sends the network request to URL and receive the answer in the slot and return to Javascript application

  4. If no reply is received between the value of timeout then extension sends "operation cancelled" as info application javascript error

  JavaScript application performs tasks:

  1. the request is to have two buttons

  2. the two buttons are hitting the same function and component the same post.

  

  Question:

  This extension works great for first time response and sends to javascript, but when to call the same function second time in the same application, extension sends "operation cancelled" in javascript. For example: if I click on the Test button it sent a response but if I click the Test1 button after getting response Test button it returns the message "transaction cancelled".

  If timeout is removed from the extension, then it returns nothing and stuck somewhere.

  What I found in the extension is, connect statement returns true both times.

  QObject::connect (_networkAccessManager, SIGNAL (finished(QNetworkReply*)),
  This, SLOT (onRequestFinished(QNetworkReply*)));

  By extension, control comes after below line. But not a response to the onRequestFinished location.

  Answer QNetworkReply * = _networkAccessManager-> get (request);

  Please let me know what I am doing wrong.

  This is a very urgent and major of my application implementation.

  Help, please

  Thanks in advance.

  Question is due to every javascript function call new pthread is be created every time and existing thread is never destroyed. However, I assumed that this local variable of pthread_t destroyed but it is not run like that. If trying to kill thread existing manually using pthread_cancel(), application crashes. Application of network function is called in this thread and QNetworkAccessManager slot is never get called except for the first time.

  To solve it, I used a public global variable that allow to create the thread only once and give the signal for the following applications when native code receives a StartThread function call. For signalling, used pthread mutex lock and characteristic signal.

  Here is the code for the function StartThread:

  bool TemplateJS::StartThread()
  {
  
      parseJsonParams();
  
      if (!g1.g_isSignalThreadCreated) {
          g1.g_isSignalThreadCreated = true;
  
          pthread_attr_t thread_attr;
          pthread_attr_init(&thread_attr);
          pthread_attr_setdetachstate(&thread_attr, PTHREAD_CREATE_DETACHED);
          pthread_t m_thread;
          pthread_create(&m_thread, &thread_attr, SignalThread, static_cast(this));
          pthread_attr_destroy(&thread_attr);
  
      } else {
          pthread_mutex_lock(&mutex);
          pthread_cond_signal(&cond);
          pthread_mutex_unlock(&mutex);
  
      }
      return true;
  }
  

  And here's the code must call after event notification.

  void TemplateNDK::Workerthread_waitForNextTime()
      {
          pthread_mutex_lock(&mutex);
          pthread_cond_wait(&cond, &mutex);
          pthread_mutex_unlock(&mutex);
  
          //keeps waiting here until get Signal from StartThread.
          doNetworkRequest();
      }
  

• InvokeTargetReply finished() signal not shooting?

  I have a problem like that in the original post in this thread:

  http://supportforums.BlackBerry.com/T5/native-development/invokation-framework-slot-for-signal-Finis...

  The poster of thread apparently solved their problem for their use case by invoking a card instead of an application, but this solution is not suitable for my use case - I simply invoke a basic application, by using a reusable code taken right out of BlackBerry tutorials, and apparently, so the launch of base app, finished() signal is not emitted.  This seems so basic that I expect others have run across it, and there is a subtle touch that is not sufficiently covered in the tutorials.

  Code:

  void ApplicationUI::launchCoreApp() {
  
      qDebug() << "The launchCoreApp() method was called";
  
      bb::system::InvokeManager invokemanager;
      bb::system::InvokeRequest request;
  
      request.setAction("bb.action.OPEN");
      request.setTarget("sys.browser");
      request.setUri("http://www.blackberry.com");
  
      bb::system::InvokeTargetReply *reply = invokemanager.invoke(request);
  
      if(reply) {
          if(reply->isFinished()) {
              qDebug() << "In launchCoreApp(), reply finished before we could connect signal to handler slot";
          } else {
              qDebug() << "In launchCoreApp(), connecting reply finished signal to handler slot";
              bool ok = connect(reply, SIGNAL(finished()), this, SLOT(onInvokeTargetFinished()));
              Q_ASSERT(ok);
          }
  
      }
  
  }
  
  void ApplicationUI::onInvokeTargetFinished() {
      qDebug() << "The onInvokeTargetFinished() slot was reached";
  }
  

  Note that this is just a test code and I didn't intend to instantiate a new InvokeManager on each call to the launchCoreApp() function - I just need to see how things work.

  So, when I run the above, launches the browser and goes to the provided URI, my debug console told me that the value of reply-> isFinished() is false, so my code takes the branch to connect the finished() signal to the onInvokeTargetFinished() slot.

  However, the slot is apparently never called, not the browser launch and not when I close the browser.

  It's reusable code light directly from the tutorials and docs, but it doesn't seem to work as announced.

  When subtle I'm missing?

  Where in the lifecycle of the invocation request response is the finished() signal is supposed to be issued?  The reference docs are very clear on this - they just say it is issued when the response message is "received", whatever that means (I understand that it is a future model, I'm not clear which is received in the life cycle integer invocation response).

  I am compiling against level API 10.2 BTW.

  I work, the only thing needed is to define the parent for the response, otherwise it will be deleted at the end of the function where it is created.

      bb::system::InvokeTargetReply *reply = invokemanager.invoke(request);
      reply->setParent(this);
  

  The parent is responsible to remove the answer, so be sure to remove it in your home.

  void ApplicationUI::onInvokeTargetFinished() {
      qDebug() << "The onInvokeTargetFinished() slot was reached";
      bb::system::InvokeTargetReply *reply = qobject_cast(sender());
      reply->deleteLater();
  }
  

• finish the signal for a toast of system?

  Here

  http://developer.BlackBerry.com/Cascades/reference/bb__system__systemtoast.html#function-finished-VA...

  It says that you can do something once the toast of the system is done.

  I have a toast built and displayed in a function of the CPP.

  {...
  bb::system::SystemToast *toast = new SystemToast(this);
  toast->setBody("Yippie!");
  toast->show();
  ...
  }
  

  How I code so I can get this signal? I've been java dong before so I'm a little lost with RPC. I got the toast works well in my application. The QML calls the RPC function. So I want to do it all in the PRC not in QML.

  Try:

  Somewhere in your PPS file...

  #include 
  #include public slots:
      void onSTFinished(bb::system::SystemUiResult::Type);
  

  Somewhere in your cpp file...

  #include 
  #include using namespace bb::system;
  
  ........    bool res = connect(toast,                    SIGNAL(finished(bb::system::SystemUiResult::Type)),                    this,                    SLOT(onSTFinished(bb::system::SystemUiResult::Type)));    Q_ASSERT(res);    Q_UNUSED(res);........ 
  
  void yourClass::onSTFinished(bb::system::SystemUiResult::Type uiResult){     // Do something with uiResult or ... another... }
  

• Signal not detected on Satellite Pro 6100 wireless

  I have two laptops Satellite Pro 6100, two of them are configured to automatically connect to our local wireless router which they both started.
  A computer is used by myself by my wife; bookmarks, email accounts and so on are different on every computer/hard drive.

  I have problems with one of the computers (mine) - the usual problem with multispindle connectors on the video boards and feeding, then I tried to use "his" computer with 'ma' machine's hard drive.

  His machine does not recognize our LAN with my hard drive installed. He came up with a new network found, but not a wireless network. Also, with this machine and my hard drive installed, can't the machine to search for wireless LANs, the icon does not appear. The switch is turned on for wireless signals and it works very well with his hard drive in it. The network is protected, and the two machines have the same id in them for connection which work fine in the original engine.

  I don't really understand this condition. Something in the bios? Something on my hard drive that is not recognized by the computer? the wrong phase of the Moon?
  Suggestions how to trouble shoot and fix this?

  Both machines are XP Pro on them, latest updates.

  Hello

  Also AFAIK, Satellite Pro 6100 was equipped with different Wlan cards so if use different HDD with different driver then the Wlan card could not be detected by Windows XP.

  Check if the wireless adapter is listed in the Device Manager and recognized correctly.

• Graph plot legend colors Signal not updated when mixed with the property node

  Hello

  We try to put the colors of the trace of a graph of Mixed Signal using a property node. Although we can change the color of the data in the field correctly, the colours of the plot in the legend do not change until some apparently unrelated operator action is performed (for example, to resize the window or by double-clicking a field name).  Waveform to XY charts don't seem to have this problem.

  Anyone know a work around?  I think I saw a similar topic on the forums earlier, but I'm sorry that I am unable to find it now

  See attached vi.

  Thank you

  -john

  I should probably have joined the last post of VI, but I have has been a thread of error between the two loops.  I also deleted the text you had so I could see the I need to press the button.

• U2717D HDMI signal not detected

  My U2717D is less than 1 week old. I plugged it with my early 2012 MacBook Pro 15 via display port using the cable supplied with the monitor. It works admirably or not the monitor input Source is set to manual or Auto select.

  Then I tried to connect my other laptops using HDMI. The cable is a HDMI cable that I connect laptops to my TV to existing work. Laptops are HP Pavilion X 2 13 (win 10 with all latest updates) and Asus S200E (Win 8.1). I also tried my MBP with a CDM-> HDMI adapter. All 3 laptops did not detect the monitor when the source is in Auto Select, monitor says HDMI no signal. All 3 laptops did not detect the monitor turned off the automatic selection and manually selected the HDMI input. DisplayPort cable has also been disconnected for the test, it made no difference. I also have a working device Google ChromeCast 2 that I plugged directly on the U2717D HDMI port. In all cases, the monitor reported no signal HDMI cable, or computers that are detectable by the monitor.

  Finally, I got the job of HP. I remember, I had to unplug all cables including the power of U2717D. Turn on U2717D, turn on the laptop, then plug an HDMI cable. A sigh of relief, I plugged the MBP to DP cable and it seems to work. The next day, I tried the Asus. Again, no signal on HDMI, no monitor detected. I unplugged DP, HDMI, pedaled power the monitor, select Manuel HDMI then connect the Asus and it finally worked.

  I have a Dell XPS13 arriving at which I intend to move the monitor between XPS 13 on HDMI and DisplayPort on the MBP (via USB to HDMI adapter type-C). However, it is unacceptable if I need power cycle and unplug the cables every time! Is a kind of 'feature' question or undocumented? Or is my defective U2717D HDMI port and I need to arrange for an Exchange?

  Before we get it exchanged, contact Dell Technical Support and ask them to send you our HDMI to HDMI Cable, part T516N. See if it fits best.

• MessageService messagesAdded signal not firing

  I am trying to connect the signal of messagesAdded but he isn't shooting QList message.

  When I have several messages in my Inbox on the server, then I goto the hub and do a refresh of the hub downloads the messages but not pull the app message signal.

  If there is only one message, then the signal is triggered to as the signal but not this signal.

  In the sample application by BlackBerry messages they have that.

  in the .h file
  
  private Q_SLOTS:    // Filters the messages in the model according to the filter property    void filterMessages();
  
  in the C++ file
  
  connect(m_messageService, SIGNAL(messagesAdded(bb::pim::account::AccountKey,    QList, QList)), SLOT(filterMessages()));
  
  void Messages::filterMessages(){}
  

  I had problems to connect the signal "messagesAdded" too. I came to identify when the signal is launched, but when that happens, that he was throwing the following error message:

  QObject::connect: Cannot queue arguments of type 'QList'
  (Make sure 'QList' is registered using qRegisterMetaType().)
  

  This thread has helped me solve it: http://qt-project.org/forums/viewthread/2884

  Adding the following lines I could connect and manage the signal:

  In .hpp file:
  
  Q_DECLARE_METATYPE(QList)
  

  in .cpp file:
  
  qRegisterMetaType >("QList");
  qRegisterMetaType >("QList");
  
  ...
  
  connect(_messageService, SIGNAL(messagesAdded(bb::pim::account::AccountKey,QList,QList)),
  SLOT(onNewMessages(bb::pim::account::AccountKey, QList,QList)),
                    Qt::QueuedConnection);
  

  The signal is sent when a new email account is added (an e-mail account, for example) or when several messages come from the server at the same time. To test the program is more convenient to try the first case because we don't have a lot of control to force the other.

  Hope this will help.

• "No signal not detected" when using the monitor.

  Original title: Second just conked monitor

  I have two LG monitors with a desktop Acer running Win7Pro: Monitor1 (M1) = W2253 Monitor 2 (M2) = 23MP65HQ. All of a sudden yesterday stopped M2 display. It is said 'No signal detected' and goes to sleep. In the devices list, it is displayed as generic PnP monitor. When I check the resolution of the screen, it shows M2 in a small gray square, but it is not identifiable or traceable.

  It is the monitor or the cable. When I unplug M1, M2 is functioning normally.  So it seems that I can't use the two together no more. Except for a little while after the blackout. I opened a program had been posted on M2 before the failure of current and for a short time while M2 has been reactivated, but with a bad resolution. When I tried to set the resolution, the screen went black again and has stay black since. The display resolution is a constant problem before that. Sometimes he'd lose the setting and I reach the screen resolution and to detect and it would be fixed - just not always. An occasional pain but is not debilitating.

  There were no cases leading up to black screen - except a Windows Update. I didn't do any cleaning, moving, or adjustment of any sort, no power bumps or other external event. He became all black while I was doing a regular job. This is my work computer and I'm the only person who uses it.

  Help?

  Click on the following link and check if it helps.

  Update a hardware driver that is not working properly.

  http://Windows.Microsoft.com/en-in/Windows/Update-driver-hardware-ISN

• Windows 7 photoshop cs5 my finished edge does not add any detail, he subtracted to this

  I have problems with my finished edge.  As I go around the selection it add any detail, he subtracted to this

  Thanks for the screenshots. I think part of the problem is that you are not selected pretty close to the bird's body. Also, try to turn the smart RADIUS. Edge tool refine needs a lot of contrast to work perfectly. I will also suggest to turn the selection into a layer mask before proceeding with refine edge. If all else fails, you can use the brush on the layer mask tool to cut out the bird properly. You can also try the pen tool (you'll probably need Google a tutorial if you don't already know how to use it).

  Come back and let us know... I hope this helps!

  Benjamin

• split the signal not showing multiple output

  I'm dividing the multichannel signal from acquisition of data NOR-6008. When I connect the data to the separation of the vi signal, there is that a single output eventhough I did the dow to give me all the outputs.

  Please help its urgent.

  What version of LabVIEW are you using?  You can post your VI?

  If I remember, one of the versions of LabVIEW had a bug in how the signal split function would work.